This tool tries to unify faces and edges of the shape which lie on the same geometry. Faces/edges are considering as 'same-domain' if a group of neighbouring faces/edges are lying on coincident surfaces/curves. In this case these faces/edges can be unified into one face/edge. ShapeUpgrade_UnifySameDomain is initialized by a shape and the next optional parameters: UnifyFaces - tries to unify all possible faces UnifyEdges - tries to unify all possible edges ConcatBSplines - if this flag is set to true then all neighbouring edges, which lay on BSpline or Bezier curves with C1 continuity on their common vertices, will be merged into one common edge. More...

#include <ShapeUpgrade_UnifySameDomain.hxx>

Inheritance diagram for ShapeUpgrade_UnifySameDomain:

[legend]

Public Types
typedef NCollection_DataMap< TopoDS_Shape, Handle< Geom_Plane >, TopTools_ShapeMapHasher >	DataMapOfFacePlane

Public Types inherited from Standard_Transient
typedef void	base_type
	Returns a type descriptor about this object. More...

Public Member Functions
	ShapeUpgrade_UnifySameDomain ()
	Empty constructor. More...

	ShapeUpgrade_UnifySameDomain (const TopoDS_Shape &aShape, const Standard_Boolean UnifyEdges=Standard_True, const Standard_Boolean UnifyFaces=Standard_True, const Standard_Boolean ConcatBSplines=Standard_False)
	Constructor defining input shape and necessary flags. It does not perform unification. More...

void	Initialize (const TopoDS_Shape &aShape, const Standard_Boolean UnifyEdges=Standard_True, const Standard_Boolean UnifyFaces=Standard_True, const Standard_Boolean ConcatBSplines=Standard_False)
	Initializes with a shape and necessary flags. It does not perform unification. If you intend to nullify the History place holder do it after initialization. More...

void	AllowInternalEdges (const Standard_Boolean theValue)
	Sets the flag defining whether it is allowed to create internal edges inside merged faces in the case of non-manifold topology. Without this flag merging through multi connected edge is forbidden. Default value is false. More...

void	KeepShape (const TopoDS_Shape &theShape)
	Sets the shape for avoid merging of the faces/edges. This shape can be vertex or edge. If the shape is a vertex it forbids merging of connected edges. If the shape is a edge it forbids merging of connected faces. This method can be called several times to keep several shapes. More...

void	KeepShapes (const TopTools_MapOfShape &theShapes)
	Sets the map of shapes for avoid merging of the faces/edges. It allows passing a ready to use map instead of calling many times the method KeepShape. More...

void	SetSafeInputMode (Standard_Boolean theValue)
	Sets the flag defining the behavior of the algorithm regarding modification of input shape. If this flag is equal to True then the input (original) shape can't be modified during modification process. Default value is true. More...

void	SetLinearTolerance (const Standard_Real theValue)
	Sets the linear tolerance. It plays the role of chord error when taking decision about merging of shapes. Default value is Precision::Confusion(). More...

void	SetAngularTolerance (const Standard_Real theValue)
	Sets the angular tolerance. If two shapes form a connection angle greater than this value they will not be merged. Default value is Precision::Angular(). More...

void	Build ()
	Performs unification and builds the resulting shape. More...

const TopoDS_Shape &	Shape () const
	Gives the resulting shape. More...

const Handle< BRepTools_History > &	History () const
	Returns the history of the processed shapes. More...

Handle< BRepTools_History > &	History ()
	Returns the history of the processed shapes. More...

Public Member Functions inherited from Standard_Transient
	Standard_Transient ()
	Empty constructor. More...

	Standard_Transient (const Standard_Transient &)
	Copy constructor – does nothing. More...

Standard_Transient &	operator= (const Standard_Transient &)
	Assignment operator, needed to avoid copying reference counter. More...

virtual	~Standard_Transient ()
	Destructor must be virtual. More...

virtual void	Delete () const
	Memory deallocator for transient classes. More...

virtual const opencascade::handle< Standard_Type > &	DynamicType () const
	Returns a type descriptor about this object. More...

Standard_Boolean	IsInstance (const opencascade::handle< Standard_Type > &theType) const
	Returns a true value if this is an instance of Type. More...

Standard_Boolean	IsInstance (const Standard_CString theTypeName) const
	Returns a true value if this is an instance of TypeName. More...

Standard_Boolean	IsKind (const opencascade::handle< Standard_Type > &theType) const
	Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...

Standard_Boolean	IsKind (const Standard_CString theTypeName) const
	Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...

Standard_Transient *	This () const
	Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero. More...

Standard_Integer	GetRefCount () const
	Get the reference counter of this object. More...

void	IncrementRefCounter () const
	Increments the reference counter of this object. More...

Standard_Integer	DecrementRefCounter () const
	Decrements the reference counter of this object; returns the decremented value. More...

Protected Member Functions
void	UnifyFaces ()
	This method makes if possible a common face from each group of faces lying on coincident surfaces. More...

void	UnifyEdges ()
	This method makes if possible a common edge from each group of smothly connected edges, which are common for the same couple of faces. More...

void	IntUnifyFaces (const TopoDS_Shape &theInpShape, TopTools_IndexedDataMapOfShapeListOfShape &theGMapEdgeFaces, const TopTools_MapOfShape &theFreeBoundMap)

Standard_Boolean	MergeEdges (TopTools_SequenceOfShape &SeqEdges, const TopTools_IndexedDataMapOfShapeListOfShape &theVFmap, NCollection_Sequence< SubSequenceOfEdges > &SeqOfSubSeqOfEdges, const TopTools_MapOfShape &NonMergVrt)
	Splits the sequence of edges into the sequence of chains. More...

Standard_Boolean	MergeSeq (TopTools_SequenceOfShape &SeqEdges, const TopTools_IndexedDataMapOfShapeListOfShape &theVFmap, const TopTools_MapOfShape &nonMergVert)
	Tries to unify the sequence of edges with the set of another edges which lies on the same geometry. More...

Standard_Boolean	MergeSubSeq (const TopTools_SequenceOfShape &theChain, const TopTools_IndexedDataMapOfShapeListOfShape &theVFmap, TopoDS_Edge &OutEdge)
	Merges a sequence of edges into one edge if possible. More...

void	UnionPCurves (const TopTools_SequenceOfShape &theChain, TopoDS_Edge &theEdge)
	Unifies the pcurve of the chain into one pcurve of the edge. More...

void	FillHistory ()
	Fills the history of the modifications during the operation. More...

Additional Inherited Members
Static Public Member Functions inherited from Standard_Transient
static const char *	get_type_name ()
	Returns a type descriptor about this object. More...

static const opencascade::handle< Standard_Type > &	get_type_descriptor ()
	Returns type descriptor of Standard_Transient class. More...

Detailed Description

This tool tries to unify faces and edges of the shape which lie on the same geometry. Faces/edges are considering as 'same-domain' if a group of neighbouring faces/edges are lying on coincident surfaces/curves. In this case these faces/edges can be unified into one face/edge. ShapeUpgrade_UnifySameDomain is initialized by a shape and the next optional parameters: UnifyFaces - tries to unify all possible faces UnifyEdges - tries to unify all possible edges ConcatBSplines - if this flag is set to true then all neighbouring edges, which lay on BSpline or Bezier curves with C1 continuity on their common vertices, will be merged into one common edge.

The input shape can be of any type containing faces or edges - compsolid, solid, shell, wire, compound of any kind of shapes. The algorithm preserves the structure of compsolids, solids, shells and wires. E.g., if two shells have a common edge and the faces sharing this edge lie on the same surface the algorithm will not unify these faces, otherwise the structure of shells would be broken. However, if such faces belong to different compounds of faces they will be unified.

The output result of the tool is the unified shape.

All the modifications of initial shape are recorded during unifying. Methods History are intended to:

set a place holder for the history of modifications of sub-shapes of the initial shape;
get the collected history.
The algorithm provides a place holder for the history and collects the history by default. To avoid collecting of the history the place holder should be set to null handle.

Member Typedef Documentation

◆ DataMapOfFacePlane

typedef NCollection_DataMap<TopoDS_Shape, Handle< Geom_Plane >, TopTools_ShapeMapHasher> ShapeUpgrade_UnifySameDomain::DataMapOfFacePlane

Constructor & Destructor Documentation

◆ ShapeUpgrade_UnifySameDomain() [1/2]

ShapeUpgrade_UnifySameDomain::ShapeUpgrade_UnifySameDomain ( )

Empty constructor.

◆ ShapeUpgrade_UnifySameDomain() [2/2]

ShapeUpgrade_UnifySameDomain::ShapeUpgrade_UnifySameDomain	(	const TopoDS_Shape &	aShape,
		const Standard_Boolean	UnifyEdges = `Standard_True`,
		const Standard_Boolean	UnifyFaces = `Standard_True`,
		const Standard_Boolean	ConcatBSplines = `Standard_False`
	)

Constructor defining input shape and necessary flags. It does not perform unification.

Member Function Documentation

◆ AllowInternalEdges()

void ShapeUpgrade_UnifySameDomain::AllowInternalEdges ( const Standard_Boolean theValue )

Sets the flag defining whether it is allowed to create internal edges inside merged faces in the case of non-manifold topology. Without this flag merging through multi connected edge is forbidden. Default value is false.

◆ Build()

void ShapeUpgrade_UnifySameDomain::Build ( )

Performs unification and builds the resulting shape.

◆ FillHistory()

void ShapeUpgrade_UnifySameDomain::FillHistory ( )

protected

Fills the history of the modifications during the operation.

◆ History() [1/2]

const Handle< BRepTools_History >& ShapeUpgrade_UnifySameDomain::History ( ) const

inline

Returns the history of the processed shapes.

◆ History() [2/2]

Handle< BRepTools_History >& ShapeUpgrade_UnifySameDomain::History ( )

inline

Returns the history of the processed shapes.

◆ Initialize()

void ShapeUpgrade_UnifySameDomain::Initialize	(	const TopoDS_Shape &	aShape,
		const Standard_Boolean	UnifyEdges = `Standard_True`,
		const Standard_Boolean	UnifyFaces = `Standard_True`,
		const Standard_Boolean	ConcatBSplines = `Standard_False`
	)

Initializes with a shape and necessary flags. It does not perform unification. If you intend to nullify the History place holder do it after initialization.

◆ IntUnifyFaces()

void ShapeUpgrade_UnifySameDomain::IntUnifyFaces	(	const TopoDS_Shape &	theInpShape,
		TopTools_IndexedDataMapOfShapeListOfShape &	theGMapEdgeFaces,
		const TopTools_MapOfShape &	theFreeBoundMap
	)

protected

◆ KeepShape()

void ShapeUpgrade_UnifySameDomain::KeepShape ( const TopoDS_Shape & theShape )

Sets the shape for avoid merging of the faces/edges. This shape can be vertex or edge. If the shape is a vertex it forbids merging of connected edges. If the shape is a edge it forbids merging of connected faces. This method can be called several times to keep several shapes.

◆ KeepShapes()

void ShapeUpgrade_UnifySameDomain::KeepShapes ( const TopTools_MapOfShape & theShapes )

Sets the map of shapes for avoid merging of the faces/edges. It allows passing a ready to use map instead of calling many times the method KeepShape.

◆ MergeEdges()

Standard_Boolean ShapeUpgrade_UnifySameDomain::MergeEdges	(	TopTools_SequenceOfShape &	SeqEdges,
		const TopTools_IndexedDataMapOfShapeListOfShape &	theVFmap,
		NCollection_Sequence< SubSequenceOfEdges > &	SeqOfSubSeqOfEdges,
		const TopTools_MapOfShape &	NonMergVrt
	)

protected

Splits the sequence of edges into the sequence of chains.

◆ MergeSeq()

Standard_Boolean ShapeUpgrade_UnifySameDomain::MergeSeq	(	TopTools_SequenceOfShape &	SeqEdges,
		const TopTools_IndexedDataMapOfShapeListOfShape &	theVFmap,
		const TopTools_MapOfShape &	nonMergVert
	)

protected

Tries to unify the sequence of edges with the set of another edges which lies on the same geometry.

◆ MergeSubSeq()

Standard_Boolean ShapeUpgrade_UnifySameDomain::MergeSubSeq	(	const TopTools_SequenceOfShape &	theChain,
		const TopTools_IndexedDataMapOfShapeListOfShape &	theVFmap,
		TopoDS_Edge &	OutEdge
	)

protected

Merges a sequence of edges into one edge if possible.

◆ SetAngularTolerance()

void ShapeUpgrade_UnifySameDomain::SetAngularTolerance ( const Standard_Real theValue )

inline

Sets the angular tolerance. If two shapes form a connection angle greater than this value they will not be merged. Default value is Precision::Angular().

◆ SetLinearTolerance()

void ShapeUpgrade_UnifySameDomain::SetLinearTolerance ( const Standard_Real theValue )

inline

Sets the linear tolerance. It plays the role of chord error when taking decision about merging of shapes. Default value is Precision::Confusion().

◆ SetSafeInputMode()

void ShapeUpgrade_UnifySameDomain::SetSafeInputMode ( Standard_Boolean theValue )

Sets the flag defining the behavior of the algorithm regarding modification of input shape. If this flag is equal to True then the input (original) shape can't be modified during modification process. Default value is true.

◆ Shape()

const TopoDS_Shape& ShapeUpgrade_UnifySameDomain::Shape ( ) const

inline

Gives the resulting shape.

◆ UnifyEdges()

void ShapeUpgrade_UnifySameDomain::UnifyEdges ( )

protected

This method makes if possible a common edge from each group of smothly connected edges, which are common for the same couple of faces.

◆ UnifyFaces()

void ShapeUpgrade_UnifySameDomain::UnifyFaces ( )

protected

This method makes if possible a common face from each group of faces lying on coincident surfaces.

◆ UnionPCurves()

void ShapeUpgrade_UnifySameDomain::UnionPCurves	(	const TopTools_SequenceOfShape &	theChain,
		TopoDS_Edge &	theEdge
	)

protected

Unifies the pcurve of the chain into one pcurve of the edge.

The documentation for this class was generated from the following file:

ShapeUpgrade_UnifySameDomain.hxx

Public Types

Public Member Functions

Protected Member Functions

Additional Inherited Members

Detailed Description

Member Typedef Documentation

◆ DataMapOfFacePlane

Constructor & Destructor Documentation

◆ ShapeUpgrade_UnifySameDomain() [1/2]

◆ ShapeUpgrade_UnifySameDomain() [2/2]

Member Function Documentation

◆ AllowInternalEdges()

◆ Build()

◆ FillHistory()

◆ History() [1/2]

◆ History() [2/2]

◆ Initialize()

◆ IntUnifyFaces()

◆ KeepShape()

◆ KeepShapes()

◆ MergeEdges()

◆ MergeSeq()

◆ MergeSubSeq()

◆ SetAngularTolerance()

◆ SetLinearTolerance()

◆ SetSafeInputMode()

◆ Shape()

◆ UnifyEdges()

◆ UnifyFaces()

◆ UnionPCurves()