XCAFDoc_DimTolTool Class Reference

Attribute containing GD&T section of XCAF document. Provide tools for GD&T section management. More...

#include <XCAFDoc_DimTolTool.hxx>

Inheritance diagram for XCAFDoc_DimTolTool:

Public Member Functions
	XCAFDoc_DimTolTool ()
TDF_Label	BaseLabel () const
	Returns the label under which GD&T table is stored. More...
const Handle< XCAFDoc_ShapeTool > &	ShapeTool ()
	Returns internal XCAFDoc_ShapeTool tool. More...
Standard_Boolean	IsDimension (const TDF_Label &theLab) const
	Returns True if the label belongs to a GD&T table and is a Dimension definition. More...
void	GetDimensionLabels (TDF_LabelSequence &theLabels) const
	Returns a sequence of Dimension labels currently stored in the GD&T table. More...
void	SetDimension (const TDF_LabelSequence &theFirstLS, const TDF_LabelSequence &theSecondLS, const TDF_Label &theDimL) const
	Sets a dimension to sequences target labels. More...
void	SetDimension (const TDF_Label &theFirstL, const TDF_Label &theSecondL, const TDF_Label &theDimL) const
	Sets a dimension to target labels. More...
void	SetDimension (const TDF_Label &theL, const TDF_Label &theDimL) const
	Sets a dimension to the target label. More...
Standard_Boolean	GetRefDimensionLabels (const TDF_Label &theShapeL, TDF_LabelSequence &theDimensions) const
	Returns all Dimension labels defined for theShapeL. More...
TDF_Label	AddDimension ()
	Adds a dimension definition to the GD&T table and returns its label. More...
Standard_Boolean	IsGeomTolerance (const TDF_Label &theLab) const
	Returns True if the label belongs to the GD&T table and is a dimension tolerance. More...
void	GetGeomToleranceLabels (TDF_LabelSequence &theLabels) const
	Returns a sequence of Tolerance labels currently stored in the GD&T table. More...
void	SetGeomTolerance (const TDF_Label &theL, const TDF_Label &theGeomTolL) const
	Sets a geometry tolerance from theGeomTolL to theL label. Checks if theGeomTolL is a geometry tolerance definition first. More...
void	SetGeomTolerance (const TDF_LabelSequence &theL, const TDF_Label &theGeomTolL) const
	Sets a geometry tolerance from theGeomTolL to sequence of labels theL. Checks if theGeomTolL is a geometry tolerance definition first. More...
Standard_Boolean	GetRefGeomToleranceLabels (const TDF_Label &theShapeL, TDF_LabelSequence &theDimTols) const
	Returns all GeomTolerance labels defined for theShapeL. More...
TDF_Label	AddGeomTolerance ()
	Adds a GeomTolerance definition to the GD&T table and returns its label. More...
Standard_Boolean	IsDimTol (const TDF_Label &theLab) const
	Returns True if theLab belongs to the GD&T table and is a dmension tolerance. More...
void	GetDimTolLabels (TDF_LabelSequence &Labels) const
	Returns a sequence of D&GTs currently stored in the GD&T table. More...
Standard_Boolean	FindDimTol (const Standard_Integer theKind, const Handle< TColStd_HArray1OfReal > &theVal, const Handle< TCollection_HAsciiString > &theName, const Handle< TCollection_HAsciiString > &theDescription, TDF_Label &lab) const
	Finds a dimension tolerance definition in the GD&T table satisfying the specified kind, values, name and description and returns its label if found. Returns False if dimension tolerance is not found in DGTtable. More...
TDF_Label	FindDimTol (const Standard_Integer theKind, const Handle< TColStd_HArray1OfReal > &theVal, const Handle< TCollection_HAsciiString > &theName, const Handle< TCollection_HAsciiString > &theDescription) const
	Finds a dimension tolerance in the GD&T table satisfying the specified kind, values, name and description and returns its label if found (or Null label else). More...
TDF_Label	AddDimTol (const Standard_Integer theKind, const Handle< TColStd_HArray1OfReal > &theVal, const Handle< TCollection_HAsciiString > &theName, const Handle< TCollection_HAsciiString > &theDescription) const
	Adds a dimension tolerance definition with the specified kind, value, name and description to the GD&T table and returns its label. More...
void	SetDimTol (const TDF_Label &theL, const TDF_Label &theDimTolL) const
	Sets existing dimension tolerance to theL label. More...
TDF_Label	SetDimTol (const TDF_Label &theL, const Standard_Integer theKind, const Handle< TColStd_HArray1OfReal > &theVal, const Handle< TCollection_HAsciiString > &theName, const Handle< TCollection_HAsciiString > &theDescription) const
	Creates a dimension tolerance and sets it to theL label. More...
Standard_Boolean	GetRefShapeLabel (const TDF_Label &theL, TDF_LabelSequence &theShapeLFirst, TDF_LabelSequence &theShapeLSecond) const
	Gets all shape labels referred by theL label of the GD&T table. Returns False if there are no shape labels added to the sequences. More...
Standard_Boolean	GetDimTol (const TDF_Label &theDimTolL, Standard_Integer &theKind, Handle< TColStd_HArray1OfReal > &theVal, Handle< TCollection_HAsciiString > &theName, Handle< TCollection_HAsciiString > &theDescription) const
	Returns dimension tolerance assigned to theDimTolL label. Returns False if no such dimension tolerance is assigned. More...
Standard_Boolean	IsDatum (const TDF_Label &lab) const
	Returns True if label belongs to the GD&T table and is a Datum definition. More...
void	GetDatumLabels (TDF_LabelSequence &Labels) const
	Returns a sequence of Datums currently stored in the GD&T table. More...
Standard_Boolean	FindDatum (const Handle< TCollection_HAsciiString > &theName, const Handle< TCollection_HAsciiString > &theDescription, const Handle< TCollection_HAsciiString > &theIdentification, TDF_Label &lab) const
	Finds a datum satisfying the specified name, description and identification and returns its label if found. More...
TDF_Label	AddDatum (const Handle< TCollection_HAsciiString > &theName, const Handle< TCollection_HAsciiString > &theDescription, const Handle< TCollection_HAsciiString > &theIdentification) const
	Adds a datum definition to the GD&T table and returns its label. More...
TDF_Label	AddDatum ()
	Adds a datum definition to the GD&T table and returns its label. More...
void	SetDatum (const TDF_LabelSequence &theShapeLabels, const TDF_Label &theDatumL) const
	Sets a datum to the sequence of shape labels. More...
void	SetDatum (const TDF_Label &theL, const TDF_Label &theTolerL, const Handle< TCollection_HAsciiString > &theName, const Handle< TCollection_HAsciiString > &theDescription, const Handle< TCollection_HAsciiString > &theIdentification) const
	Sets a datum to theL label and binds it with theTolerL label. A datum with the specified name, description and identification is created if it isn't found in the GD&T table. More...
void	SetDatumToGeomTol (const TDF_Label &theDatumL, const TDF_Label &theTolerL) const
	Sets a datum from theDatumL label to theToletL label. More...
Standard_Boolean	GetDatum (const TDF_Label &theDatumL, Handle< TCollection_HAsciiString > &theName, Handle< TCollection_HAsciiString > &theDescription, Handle< TCollection_HAsciiString > &theIdentification) const
	Returns datum assigned to theDatumL label. Returns False if no such datum is assigned. More...
Standard_Boolean	GetDatumOfTolerLabels (const TDF_Label &theDimTolL, TDF_LabelSequence &theDatums) const
	Returns all Datum labels defined for theDimTolL label. More...
Standard_Boolean	GetDatumWithObjectOfTolerLabels (const TDF_Label &theDimTolL, TDF_LabelSequence &theDatums) const
	Returns all Datum labels with XCAFDimTolObjects_DatumObject defined for label theDimTolL. More...
Standard_Boolean	GetTolerOfDatumLabels (const TDF_Label &theDatumL, TDF_LabelSequence &theTols) const
	Returns all GeomToleranses labels defined for theDatumL label. More...
Standard_Boolean	GetRefDatumLabel (const TDF_Label &theShapeL, TDF_LabelSequence &theDatum) const
	Returns Datum label defined for theShapeL label. More...
Standard_Boolean	IsLocked (const TDF_Label &theViewL) const
	Returns true if the given GDT is marked as locked. More...
void	Lock (const TDF_Label &theViewL) const
	Mark the given GDT as locked. More...
void	GetGDTPresentations (NCollection_IndexedDataMap< TDF_Label, TopoDS_Shape, TDF_LabelMapHasher > &theGDTLabelToShape) const
	fill the map GDT label -> shape presentation More...
void	SetGDTPresentations (NCollection_IndexedDataMap< TDF_Label, TopoDS_Shape, TDF_LabelMapHasher > &theGDTLabelToPrs)
	Set shape presentation for GDT labels according to given map (theGDTLabelToPrs) theGDTLabelToPrsName map is an additional argument, can be used to set presentation names. If label is not in the theGDTLabelToPrsName map, the presentation name will be empty. More...
void	Unlock (const TDF_Label &theViewL) const
	Unlock the given GDT. More...
const Standard_GUID &	ID () const override
	Returns the ID of the attribute. More...
virtual void	DumpJson (Standard_OStream &theOStream, Standard_Integer theDepth=-1) const override
	Dumps the content of me into the stream. More...
Public Member Functions inherited from TDataStd_GenericEmpty
void	Restore (const Handle< TDF_Attribute > &) override
	Restores the backuped contents from <anAttribute> into this one. It is used when aborting a transaction. More...
void	Paste (const Handle< TDF_Attribute > &, const Handle< TDF_RelocationTable > &) const override
	This method is different from the "Copy" one, because it is used when copying an attribute from a source structure into a target structure. This method may paste the contents of <me> into <intoAttribute>. More...
Public Member Functions inherited from TDF_Attribute
virtual void	SetID (const Standard_GUID &)
	Sets specific ID of the attribute (supports several attributes of one type at the same label feature). More...
virtual void	SetID ()
	Sets default ID defined in nested class (to be used for attributes having User ID feature). More...
const TDF_Label	Label () const
	Returns the label to which the attribute is attached. If the label is not included in a DF, the label is null. See Label. Warning If the label is not included in a data framework, it is null. This function should not be redefined inline. More...
Standard_Integer	Transaction () const
	Returns the transaction index in which the attribute has been created or modified. More...
Standard_Integer	UntilTransaction () const
	Returns the upper transaction index until which the attribute is/was valid. This number may vary. A removed attribute validity range is reduced to its transaction index. More...
Standard_Boolean	IsValid () const
	Returns true if the attribute is valid; i.e. not a backuped or removed one. More...
Standard_Boolean	IsNew () const
	Returns true if the attribute has no backup. More...
Standard_Boolean	IsForgotten () const
	Returns true if the attribute forgotten status is set. More...
Standard_Boolean	IsAttribute (const Standard_GUID &anID) const
	Returns true if it exists an associated attribute of <me> with <anID> as ID. More...
Standard_Boolean	FindAttribute (const Standard_GUID &anID, Handle< TDF_Attribute > &anAttribute) const
	Finds an associated attribute of <me>, according to <anID>. the returned <anAttribute> is a valid one. The method returns True if found, False otherwise. A removed attribute cannot be found using this method. More...
template<class T >
Standard_Boolean	FindAttribute (const Standard_GUID &theID, Handle< T > &theAttr) const
	Safe variant for arbitrary type of argument. More...
void	AddAttribute (const Handle< TDF_Attribute > &other) const
	Adds an Attribute <other> to the label of <me>.Raises if there is already one of the same GUID fhan <other>. More...
Standard_Boolean	ForgetAttribute (const Standard_GUID &aguid) const
	Forgets the Attribute of GUID <aguid> associated to the label of <me>. Be careful that if <me> is the attribute of <guid>, <me> will have a null label after this call. If the attribute doesn't exist returns False. Otherwise returns True. More...
void	ForgetAllAttributes (const Standard_Boolean clearChildren=Standard_True) const
	Forgets all the attributes attached to the label of <me>. Does it on the sub-labels if <clearChildren> is set to true. Of course, this method is compatible with Transaction & Delta mechanisms. Be careful that if <me> will have a null label after this call. More...
virtual void	AfterAddition ()
	Something to do after adding an Attribute to a label. More...
virtual void	BeforeRemoval ()
	Something to do before removing an Attribute from a label. More...
virtual void	BeforeForget ()
	Something to do before forgetting an Attribute to a label. More...
virtual void	AfterResume ()
	Something to do after resuming an Attribute from a label. More...
virtual Standard_Boolean	AfterRetrieval (const Standard_Boolean forceIt=Standard_False)
	Something to do AFTER creation of an attribute by persistent-transient translation. The returned status says if AfterUndo has been performed (true) or if this callback must be called once again further (false). If <forceIt> is set to true, the method MUST perform and return true. Does nothing by default and returns true. More...
virtual Standard_Boolean	BeforeUndo (const Handle< TDF_AttributeDelta > &anAttDelta, const Standard_Boolean forceIt=Standard_False)
	Something to do before applying <anAttDelta>. The returned status says if AfterUndo has been performed (true) or if this callback must be called once again further (false). If <forceIt> is set to true, the method MUST perform and return true. Does nothing by default and returns true. More...
virtual Standard_Boolean	AfterUndo (const Handle< TDF_AttributeDelta > &anAttDelta, const Standard_Boolean forceIt=Standard_False)
	Something to do after applying <anAttDelta>. The returned status says if AfterUndo has been performed (true) or if this callback must be called once again further (false). If <forceIt> is set to true, the method MUST perform and return true. Does nothing by default and returns true. More...
virtual void	BeforeCommitTransaction ()
	A callback. By default does nothing. It is called by TDF_Data::CommitTransaction() method. More...
void	Backup ()
	Backups the attribute. The backuped attribute is flagged "Backuped" and not "Valid". More...
Standard_Boolean	IsBackuped () const
	Returns true if the attribute backup status is set. This status is set/unset by the Backup() method. More...
virtual Handle< TDF_Attribute >	BackupCopy () const
	Copies the attribute contents into a new other attribute. It is used by Backup(). More...
virtual Handle< TDF_DeltaOnAddition >	DeltaOnAddition () const
	Makes an AttributeDelta because <me> appeared. The only known use of a redefinition of this method is to return a null handle (no delta). More...
virtual Handle< TDF_DeltaOnForget >	DeltaOnForget () const
	Makes an AttributeDelta because <me> has been forgotten. More...
virtual Handle< TDF_DeltaOnResume >	DeltaOnResume () const
	Makes an AttributeDelta because <me> has been resumed. More...
virtual Handle< TDF_DeltaOnModification >	DeltaOnModification (const Handle< TDF_Attribute > &anOldAttribute) const
	Makes a DeltaOnModification between <me> and <anOldAttribute. More...
virtual void	DeltaOnModification (const Handle< TDF_DeltaOnModification > &aDelta)
	Applies a DeltaOnModification to <me>. More...
virtual Handle< TDF_DeltaOnRemoval >	DeltaOnRemoval () const
	Makes a DeltaOnRemoval on <me> because <me> has disappeared from the DS. More...
virtual Handle< TDF_Attribute >	NewEmpty () const =0
	Returns an new empty attribute from the good end type. It is used by the copy algorithm. More...
virtual void	References (const Handle< TDF_DataSet > &aDataSet) const
	Adds the first level referenced attributes and labels to <aDataSet>. More...
virtual Standard_OStream &	Dump (Standard_OStream &anOS) const
	Dumps the minimum information about <me> on <aStream>. More...
Standard_OStream &	operator<< (Standard_OStream &anOS) const
virtual void	ExtendedDump (Standard_OStream &anOS, const TDF_IDFilter &aFilter, TDF_AttributeIndexedMap &aMap) const
	Dumps the attribute content on <aStream>, using <aMap> like this: if an attribute is not in the map, first put add it to the map and then dump it. Use the map rank instead of dumping each attribute field. More...
void	Forget (const Standard_Integer aTransaction)
	Forgets the attribute. <aTransaction> is the current transaction in which the forget is done. A forgotten attribute is also flagged not "Valid". More...
Public Member Functions inherited from Standard_Transient
	Standard_Transient ()
	Empty constructor. More...
	Standard_Transient (const Standard_Transient &)
	Copy constructor – does nothing. More...
Standard_Transient &	operator= (const Standard_Transient &)
	Assignment operator, needed to avoid copying reference counter. More...
virtual	~Standard_Transient ()
	Destructor must be virtual. More...
virtual void	Delete () const
	Memory deallocator for transient classes. More...
virtual const opencascade::handle< Standard_Type > &	DynamicType () const
	Returns a type descriptor about this object. More...
Standard_Boolean	IsInstance (const opencascade::handle< Standard_Type > &theType) const
	Returns a true value if this is an instance of Type. More...
Standard_Boolean	IsInstance (const Standard_CString theTypeName) const
	Returns a true value if this is an instance of TypeName. More...
Standard_Boolean	IsKind (const opencascade::handle< Standard_Type > &theType) const
	Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...
Standard_Boolean	IsKind (const Standard_CString theTypeName) const
	Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...
Standard_Transient *	This () const
	Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero. More...
Standard_Integer	GetRefCount () const
	Get the reference counter of this object. More...
void	IncrementRefCounter () const
	Increments the reference counter of this object. More...
Standard_Integer	DecrementRefCounter () const
	Decrements the reference counter of this object; returns the decremented value. More...

Static Public Member Functions
static Handle< XCAFDoc_DimTolTool >	Set (const TDF_Label &L)
	Creates (if not exist) DimTolTool attribute. More...
static const Standard_GUID &	GetID ()
	Returns the standard GD&T tool GUID. More...
Static Public Member Functions inherited from Standard_Transient
static const char *	get_type_name ()
	Returns a type descriptor about this object. More...
static const opencascade::handle< Standard_Type > &	get_type_descriptor ()
	Returns type descriptor of Standard_Transient class. More...

Additional Inherited Members
Public Types inherited from Standard_Transient
typedef void	base_type
	Returns a type descriptor about this object. More...
Protected Member Functions inherited from TDF_Attribute
	TDF_Attribute ()
	Initializes fields. More...

Detailed Description

Attribute containing GD&T section of XCAF document. Provide tools for GD&T section management.

Constructor & Destructor Documentation

XCAFDoc_DimTolTool()

XCAFDoc_DimTolTool::XCAFDoc_DimTolTool

(

)

Member Function Documentation

AddDatum() [1/2]

TDF_Label XCAFDoc_DimTolTool::AddDatum	(	const Handle< TCollection_HAsciiString > &	theName,
		const Handle< TCollection_HAsciiString > &	theDescription,
		const Handle< TCollection_HAsciiString > &	theIdentification
	)		const

Adds a datum definition to the GD&T table and returns its label.

AddDatum() [2/2]

TDF_Label XCAFDoc_DimTolTool::AddDatum

(

)

Adds a datum definition to the GD&T table and returns its label.

AddDimension()

TDF_Label XCAFDoc_DimTolTool::AddDimension

(

)

Adds a dimension definition to the GD&T table and returns its label.

AddDimTol()

TDF_Label XCAFDoc_DimTolTool::AddDimTol	(	const Standard_Integer	theKind,
		const Handle< TColStd_HArray1OfReal > &	theVal,
		const Handle< TCollection_HAsciiString > &	theName,
		const Handle< TCollection_HAsciiString > &	theDescription
	)		const

Adds a dimension tolerance definition with the specified kind, value, name and description to the GD&T table and returns its label.

AddGeomTolerance()

TDF_Label XCAFDoc_DimTolTool::AddGeomTolerance

(

)

Adds a GeomTolerance definition to the GD&T table and returns its label.

BaseLabel()

TDF_Label XCAFDoc_DimTolTool::BaseLabel

(

)

const

Returns the label under which GD&T table is stored.

DumpJson()

virtual void XCAFDoc_DimTolTool::DumpJson ( Standard_OStream &  theOStream, Standard_Integer  theDepth = -1  ) const

overridevirtual

Dumps the content of me into the stream.

Reimplemented from TDataStd_GenericEmpty.

FindDatum()

Standard_Boolean XCAFDoc_DimTolTool::FindDatum	(	const Handle< TCollection_HAsciiString > &	theName,
		const Handle< TCollection_HAsciiString > &	theDescription,
		const Handle< TCollection_HAsciiString > &	theIdentification,
		TDF_Label &	lab
	)		const

Finds a datum satisfying the specified name, description and identification and returns its label if found.

FindDimTol() [1/2]

Standard_Boolean XCAFDoc_DimTolTool::FindDimTol	(	const Standard_Integer	theKind,
		const Handle< TColStd_HArray1OfReal > &	theVal,
		const Handle< TCollection_HAsciiString > &	theName,
		const Handle< TCollection_HAsciiString > &	theDescription,
		TDF_Label &	lab
	)		const

Finds a dimension tolerance definition in the GD&T table satisfying the specified kind, values, name and description and returns its label if found. Returns False if dimension tolerance is not found in DGTtable.

FindDimTol() [2/2]

TDF_Label XCAFDoc_DimTolTool::FindDimTol	(	const Standard_Integer	theKind,
		const Handle< TColStd_HArray1OfReal > &	theVal,
		const Handle< TCollection_HAsciiString > &	theName,
		const Handle< TCollection_HAsciiString > &	theDescription
	)		const

Finds a dimension tolerance in the GD&T table satisfying the specified kind, values, name and description and returns its label if found (or Null label else).

GetDatum()

Standard_Boolean XCAFDoc_DimTolTool::GetDatum	(	const TDF_Label &	theDatumL,
		Handle< TCollection_HAsciiString > &	theName,
		Handle< TCollection_HAsciiString > &	theDescription,
		Handle< TCollection_HAsciiString > &	theIdentification
	)		const

Returns datum assigned to theDatumL label. Returns False if no such datum is assigned.

GetDatumLabels()

void XCAFDoc_DimTolTool::GetDatumLabels

(

TDF_LabelSequence &

Labels

)

const

Returns a sequence of Datums currently stored in the GD&T table.

GetDatumOfTolerLabels()

Standard_Boolean XCAFDoc_DimTolTool::GetDatumOfTolerLabels	(	const TDF_Label &	theDimTolL,
		TDF_LabelSequence &	theDatums
	)		const

Returns all Datum labels defined for theDimTolL label.

GetDatumWithObjectOfTolerLabels()

Standard_Boolean XCAFDoc_DimTolTool::GetDatumWithObjectOfTolerLabels	(	const TDF_Label &	theDimTolL,
		TDF_LabelSequence &	theDatums
	)		const

Returns all Datum labels with XCAFDimTolObjects_DatumObject defined for label theDimTolL.

GetDimensionLabels()

void XCAFDoc_DimTolTool::GetDimensionLabels

(

TDF_LabelSequence &

theLabels

)

const

Returns a sequence of Dimension labels currently stored in the GD&T table.

GetDimTol()

Standard_Boolean XCAFDoc_DimTolTool::GetDimTol	(	const TDF_Label &	theDimTolL,
		Standard_Integer &	theKind,
		Handle< TColStd_HArray1OfReal > &	theVal,
		Handle< TCollection_HAsciiString > &	theName,
		Handle< TCollection_HAsciiString > &	theDescription
	)		const

Returns dimension tolerance assigned to theDimTolL label. Returns False if no such dimension tolerance is assigned.

GetDimTolLabels()

void XCAFDoc_DimTolTool::GetDimTolLabels

(

TDF_LabelSequence &

Labels

)

const

Returns a sequence of D&GTs currently stored in the GD&T table.

GetGDTPresentations()

void XCAFDoc_DimTolTool::GetGDTPresentations

(

NCollection_IndexedDataMap< TDF_Label, TopoDS_Shape, TDF_LabelMapHasher > &

theGDTLabelToShape

)

const

fill the map GDT label -> shape presentation

GetGeomToleranceLabels()

void XCAFDoc_DimTolTool::GetGeomToleranceLabels

(

TDF_LabelSequence &

theLabels

)

const

Returns a sequence of Tolerance labels currently stored in the GD&T table.

GetID()

static const Standard_GUID& XCAFDoc_DimTolTool::GetID ( )

static

Returns the standard GD&T tool GUID.

GetRefDatumLabel()

Standard_Boolean XCAFDoc_DimTolTool::GetRefDatumLabel	(	const TDF_Label &	theShapeL,
		TDF_LabelSequence &	theDatum
	)		const

Returns Datum label defined for theShapeL label.

GetRefDimensionLabels()

Standard_Boolean XCAFDoc_DimTolTool::GetRefDimensionLabels	(	const TDF_Label &	theShapeL,
		TDF_LabelSequence &	theDimensions
	)		const

Returns all Dimension labels defined for theShapeL.

GetRefGeomToleranceLabels()

Standard_Boolean XCAFDoc_DimTolTool::GetRefGeomToleranceLabels	(	const TDF_Label &	theShapeL,
		TDF_LabelSequence &	theDimTols
	)		const

Returns all GeomTolerance labels defined for theShapeL.

GetRefShapeLabel()

Standard_Boolean XCAFDoc_DimTolTool::GetRefShapeLabel	(	const TDF_Label &	theL,
		TDF_LabelSequence &	theShapeLFirst,
		TDF_LabelSequence &	theShapeLSecond
	)		const

Gets all shape labels referred by theL label of the GD&T table. Returns False if there are no shape labels added to the sequences.

GetTolerOfDatumLabels()

Standard_Boolean XCAFDoc_DimTolTool::GetTolerOfDatumLabels	(	const TDF_Label &	theDatumL,
		TDF_LabelSequence &	theTols
	)		const

Returns all GeomToleranses labels defined for theDatumL label.

ID()

const Standard_GUID& XCAFDoc_DimTolTool::ID ( ) const

overridevirtual

Returns the ID of the attribute.

Implements TDF_Attribute.

IsDatum()

Standard_Boolean XCAFDoc_DimTolTool::IsDatum

(

const TDF_Label &

lab

)

const

Returns True if label belongs to the GD&T table and is a Datum definition.

IsDimension()

Standard_Boolean XCAFDoc_DimTolTool::IsDimension

(

const TDF_Label &

theLab

)

const

Returns True if the label belongs to a GD&T table and is a Dimension definition.

IsDimTol()

Standard_Boolean XCAFDoc_DimTolTool::IsDimTol

(

const TDF_Label &

theLab

)

const

Returns True if theLab belongs to the GD&T table and is a dmension tolerance.

IsGeomTolerance()

Standard_Boolean XCAFDoc_DimTolTool::IsGeomTolerance

(

const TDF_Label &

theLab

)

const

Returns True if the label belongs to the GD&T table and is a dimension tolerance.

IsLocked()

Standard_Boolean XCAFDoc_DimTolTool::IsLocked

(

const TDF_Label &

theViewL

)

const

Returns true if the given GDT is marked as locked.

Lock()

void XCAFDoc_DimTolTool::Lock

(

const TDF_Label &

theViewL

)

const

Mark the given GDT as locked.

Set()

static Handle< XCAFDoc_DimTolTool > XCAFDoc_DimTolTool::Set ( const TDF_Label &  L )

static

Creates (if not exist) DimTolTool attribute.

SetDatum() [1/2]

void XCAFDoc_DimTolTool::SetDatum	(	const TDF_LabelSequence &	theShapeLabels,
		const TDF_Label &	theDatumL
	)		const

Sets a datum to the sequence of shape labels.

SetDatum() [2/2]

void XCAFDoc_DimTolTool::SetDatum	(	const TDF_Label &	theL,
		const TDF_Label &	theTolerL,
		const Handle< TCollection_HAsciiString > &	theName,
		const Handle< TCollection_HAsciiString > &	theDescription,
		const Handle< TCollection_HAsciiString > &	theIdentification
	)		const

Sets a datum to theL label and binds it with theTolerL label. A datum with the specified name, description and identification is created if it isn't found in the GD&T table.

SetDatumToGeomTol()

void XCAFDoc_DimTolTool::SetDatumToGeomTol	(	const TDF_Label &	theDatumL,
		const TDF_Label &	theTolerL
	)		const

Sets a datum from theDatumL label to theToletL label.

SetDimension() [1/3]

void XCAFDoc_DimTolTool::SetDimension	(	const TDF_LabelSequence &	theFirstLS,
		const TDF_LabelSequence &	theSecondLS,
		const TDF_Label &	theDimL
	)		const

Sets a dimension to sequences target labels.

SetDimension() [2/3]

void XCAFDoc_DimTolTool::SetDimension	(	const TDF_Label &	theFirstL,
		const TDF_Label &	theSecondL,
		const TDF_Label &	theDimL
	)		const

Sets a dimension to target labels.

SetDimension() [3/3]

void XCAFDoc_DimTolTool::SetDimension	(	const TDF_Label &	theL,
		const TDF_Label &	theDimL
	)		const

Sets a dimension to the target label.

SetDimTol() [1/2]

void XCAFDoc_DimTolTool::SetDimTol	(	const TDF_Label &	theL,
		const TDF_Label &	theDimTolL
	)		const

Sets existing dimension tolerance to theL label.

SetDimTol() [2/2]

TDF_Label XCAFDoc_DimTolTool::SetDimTol	(	const TDF_Label &	theL,
		const Standard_Integer	theKind,
		const Handle< TColStd_HArray1OfReal > &	theVal,
		const Handle< TCollection_HAsciiString > &	theName,
		const Handle< TCollection_HAsciiString > &	theDescription
	)		const

Creates a dimension tolerance and sets it to theL label.

SetGDTPresentations()

void XCAFDoc_DimTolTool::SetGDTPresentations

(

NCollection_IndexedDataMap< TDF_Label, TopoDS_Shape, TDF_LabelMapHasher > &

theGDTLabelToPrs

)

Set shape presentation for GDT labels according to given map (theGDTLabelToPrs) theGDTLabelToPrsName map is an additional argument, can be used to set presentation names. If label is not in the theGDTLabelToPrsName map, the presentation name will be empty.

SetGeomTolerance() [1/2]

void XCAFDoc_DimTolTool::SetGeomTolerance	(	const TDF_Label &	theL,
		const TDF_Label &	theGeomTolL
	)		const

Sets a geometry tolerance from theGeomTolL to theL label. Checks if theGeomTolL is a geometry tolerance definition first.

SetGeomTolerance() [2/2]

void XCAFDoc_DimTolTool::SetGeomTolerance	(	const TDF_LabelSequence &	theL,
		const TDF_Label &	theGeomTolL
	)		const

Sets a geometry tolerance from theGeomTolL to sequence of labels theL. Checks if theGeomTolL is a geometry tolerance definition first.

ShapeTool()

const Handle< XCAFDoc_ShapeTool >& XCAFDoc_DimTolTool::ShapeTool

(

)

Returns internal XCAFDoc_ShapeTool tool.

Unlock()

void XCAFDoc_DimTolTool::Unlock

(

const TDF_Label &

theViewL

)

const

Unlock the given GDT.

---

The documentation for this class was generated from the following file:

• XCAFDoc_DimTolTool.hxx