Root class. More...

#include <BiTgte_Blend.hxx>

Public Member Functions
	BiTgte_Blend ()

	BiTgte_Blend (const TopoDS_Shape &S, const Standard_Real Radius, const Standard_Real Tol, const Standard_Boolean NUBS)
	~~: Shape to be rounded <Radius>: radius of the fillet <Tol>: Tol3d used in approximations <NUBS>: if true, generate only NUBS surfaces, if false, generate analytical surfaces if possible~~

void	Init (const TopoDS_Shape &S, const Standard_Real Radius, const Standard_Real Tol, const Standard_Boolean NUBS)

void	Clear ()
	Clear all the Fields.

void	SetFaces (const TopoDS_Face &F1, const TopoDS_Face &F2)
	Set two faces of <myShape> on which the Sphere must roll.

void	SetEdge (const TopoDS_Edge &Edge)
	Set an edge of <myShape> to be rounded.

void	SetStoppingFace (const TopoDS_Face &Face)
	Set a face on which the fillet must stop.

void	Perform (const Standard_Boolean BuildShape=Standard_True)
	Compute the generated surfaces. If <BuildShape> is true, compute the resulting Shape. If false, only the blending surfaces are computed.

Standard_Boolean	IsDone () const

const TopoDS_Shape &	Shape () const
	returns the result

Standard_Integer	NbSurfaces () const
	returns the Number of generated surfaces.

Handle< Geom_Surface >	Surface (const Standard_Integer Index) const
	returns the surface of range Index

const TopoDS_Face &	Face (const Standard_Integer Index) const
	returns the surface of range Index

void	CenterLines (TopTools_ListOfShape &LC) const
	set in <LC> all the center lines

Handle< Geom_Surface >	Surface (const TopoDS_Shape &CenterLine) const
	returns the surface generated by the centerline. <CenterLine> may be

const TopoDS_Face &	Face (const TopoDS_Shape &CenterLine) const
	returns the face generated by the centerline. <CenterLine> may be

BiTgte_ContactType	ContactType (const Standard_Integer Index) const
	returns the type of contact

const TopoDS_Shape &	SupportShape1 (const Standard_Integer Index) const
	gives the first support shape relative to SurfaceFillet(Index);

const TopoDS_Shape &	SupportShape2 (const Standard_Integer Index) const
	gives the second support shape relative to SurfaceFillet(Index);

Handle< Geom_Curve >	CurveOnShape1 (const Standard_Integer Index) const
	gives the 3d curve of SurfaceFillet(Index) on SupportShape1(Index)

Handle< Geom_Curve >	CurveOnShape2 (const Standard_Integer Index) const
	gives the 3d curve of SurfaceFillet(Index) on SupportShape2(Index)

Handle< Geom2d_Curve >	PCurveOnFace1 (const Standard_Integer Index) const
	gives the PCurve associated to CurvOnShape1(Index) on the support face Warning: returns a Null Handle if SupportShape1 is not a Face

Handle< Geom2d_Curve >	PCurve1OnFillet (const Standard_Integer Index) const
	gives the PCurve associated to CurveOnShape1(Index) on the Fillet

Handle< Geom2d_Curve >	PCurveOnFace2 (const Standard_Integer Index) const
	gives the PCurve associated to CurveOnShape2(Index) on the support face Warning: returns a Null Handle if SupportShape2 is not a Face

Handle< Geom2d_Curve >	PCurve2OnFillet (const Standard_Integer Index) const
	gives the PCurve associated to CurveOnShape2(Index) on the fillet

Standard_Integer	NbBranches ()

void	IndicesOfBranche (const Standard_Integer Index, Standard_Integer &From, Standard_Integer &To) const
	Set in <From>,<To> the indices of the faces of the branche <Index>.

void	ComputeCenters ()
	Computes the center lines.

Detailed Description

Root class.

Constructor & Destructor Documentation

◆ BiTgte_Blend() [1/2]

BiTgte_Blend::BiTgte_Blend ( )

◆ BiTgte_Blend() [2/2]

BiTgte_Blend::BiTgte_Blend	(	const TopoDS_Shape &	S,
		const Standard_Real	Radius,
		const Standard_Real	Tol,
		const Standard_Boolean	NUBS
	)

~~: Shape to be rounded <Radius>: radius of the fillet <Tol>: Tol3d used in approximations <NUBS>: if true, generate only NUBS surfaces, if false, generate analytical surfaces if possible~~

Member Function Documentation

◆ CenterLines()

void BiTgte_Blend::CenterLines ( TopTools_ListOfShape & LC ) const

set in <LC> all the center lines

◆ Clear()

void BiTgte_Blend::Clear ( )

Clear all the Fields.

◆ ComputeCenters()

void BiTgte_Blend::ComputeCenters ( )

Computes the center lines.

◆ ContactType()

BiTgte_ContactType BiTgte_Blend::ContactType ( const Standard_Integer Index ) const

returns the type of contact

◆ CurveOnShape1()

Handle< Geom_Curve > BiTgte_Blend::CurveOnShape1 ( const Standard_Integer Index ) const

gives the 3d curve of SurfaceFillet(Index) on SupportShape1(Index)

◆ CurveOnShape2()

Handle< Geom_Curve > BiTgte_Blend::CurveOnShape2 ( const Standard_Integer Index ) const

gives the 3d curve of SurfaceFillet(Index) on SupportShape2(Index)

◆ Face() [1/2]

const TopoDS_Face & BiTgte_Blend::Face ( const Standard_Integer Index ) const

returns the surface of range Index

◆ Face() [2/2]

const TopoDS_Face & BiTgte_Blend::Face ( const TopoDS_Shape & CenterLine ) const

returns the face generated by the centerline. <CenterLine> may be

an edge : generate a pipe.
a vertex : generate a sphere. Warning: returns a Null Shape if <CenterLine> generates no surface.

◆ IndicesOfBranche()

void BiTgte_Blend::IndicesOfBranche	(	const Standard_Integer	Index,
		Standard_Integer &	From,
		Standard_Integer &	To
	)		const

Set in <From>,<To> the indices of the faces of the branche <Index>.

i.e: Branche<Index> = Face(From) + Face(From+1) + ..+ Face(To)

◆ Init()

void BiTgte_Blend::Init	(	const TopoDS_Shape &	S,
		const Standard_Real	Radius,
		const Standard_Real	Tol,
		const Standard_Boolean	NUBS
	)

◆ IsDone()

Standard_Boolean BiTgte_Blend::IsDone ( ) const

◆ NbBranches()

Standard_Integer BiTgte_Blend::NbBranches ( )

◆ NbSurfaces()

Standard_Integer BiTgte_Blend::NbSurfaces ( ) const

returns the Number of generated surfaces.

◆ PCurve1OnFillet()

Handle< Geom2d_Curve > BiTgte_Blend::PCurve1OnFillet ( const Standard_Integer Index ) const

gives the PCurve associated to CurveOnShape1(Index) on the Fillet

◆ PCurve2OnFillet()

Handle< Geom2d_Curve > BiTgte_Blend::PCurve2OnFillet ( const Standard_Integer Index ) const

gives the PCurve associated to CurveOnShape2(Index) on the fillet

◆ PCurveOnFace1()

Handle< Geom2d_Curve > BiTgte_Blend::PCurveOnFace1 ( const Standard_Integer Index ) const

gives the PCurve associated to CurvOnShape1(Index) on the support face Warning: returns a Null Handle if SupportShape1 is not a Face

◆ PCurveOnFace2()

Handle< Geom2d_Curve > BiTgte_Blend::PCurveOnFace2 ( const Standard_Integer Index ) const

gives the PCurve associated to CurveOnShape2(Index) on the support face Warning: returns a Null Handle if SupportShape2 is not a Face

◆ Perform()

void BiTgte_Blend::Perform ( const Standard_Boolean BuildShape = Standard_True )

Compute the generated surfaces. If <BuildShape> is true, compute the resulting Shape. If false, only the blending surfaces are computed.

◆ SetEdge()

void BiTgte_Blend::SetEdge ( const TopoDS_Edge & Edge )

Set an edge of <myShape> to be rounded.

◆ SetFaces()

void BiTgte_Blend::SetFaces	(	const TopoDS_Face &	F1,
		const TopoDS_Face &	F2
	)

Set two faces of <myShape> on which the Sphere must roll.

◆ SetStoppingFace()

void BiTgte_Blend::SetStoppingFace ( const TopoDS_Face & Face )

Set a face on which the fillet must stop.

◆ Shape()

const TopoDS_Shape & BiTgte_Blend::Shape ( ) const

returns the result

◆ SupportShape1()

const TopoDS_Shape & BiTgte_Blend::SupportShape1 ( const Standard_Integer Index ) const

gives the first support shape relative to SurfaceFillet(Index);

◆ SupportShape2()

const TopoDS_Shape & BiTgte_Blend::SupportShape2 ( const Standard_Integer Index ) const

gives the second support shape relative to SurfaceFillet(Index);

◆ Surface() [1/2]

Handle< Geom_Surface > BiTgte_Blend::Surface ( const Standard_Integer Index ) const