Blend_Point Class Reference

#include <Blend_Point.hxx>

Public Member Functions
	Blend_Point ()
	Blend_Point (const gp_Pnt &Pt1, const gp_Pnt &Pt2, const Standard_Real Param, const Standard_Real U1, const Standard_Real V1, const Standard_Real U2, const Standard_Real V2, const gp_Vec &Tg1, const gp_Vec &Tg2, const gp_Vec2d &Tg12d, const gp_Vec2d &Tg22d)
	Creates a point on 2 surfaces, with tangents.
	Blend_Point (const gp_Pnt &Pt1, const gp_Pnt &Pt2, const Standard_Real Param, const Standard_Real U1, const Standard_Real V1, const Standard_Real U2, const Standard_Real V2)
	Creates a point on 2 surfaces, without tangents.
	Blend_Point (const gp_Pnt &Pts, const gp_Pnt &Ptc, const Standard_Real Param, const Standard_Real U, const Standard_Real V, const Standard_Real W, const gp_Vec &Tgs, const gp_Vec &Tgc, const gp_Vec2d &Tg2d)
	Creates a point on a surface and a curve, with tangents.
	Blend_Point (const gp_Pnt &Pts, const gp_Pnt &Ptc, const Standard_Real Param, const Standard_Real U, const Standard_Real V, const Standard_Real W)
	Creates a point on a surface and a curve, without tangents.
	Blend_Point (const gp_Pnt &Pt1, const gp_Pnt &Pt2, const Standard_Real Param, const Standard_Real U1, const Standard_Real V1, const Standard_Real U2, const Standard_Real V2, const Standard_Real PC, const gp_Vec &Tg1, const gp_Vec &Tg2, const gp_Vec2d &Tg12d, const gp_Vec2d &Tg22d)
	Creates a point on a surface and a curve on surface, with tangents.
	Blend_Point (const gp_Pnt &Pt1, const gp_Pnt &Pt2, const Standard_Real Param, const Standard_Real U1, const Standard_Real V1, const Standard_Real U2, const Standard_Real V2, const Standard_Real PC)
	Creates a point on a surface and a curve on surface, without tangents.
	Blend_Point (const gp_Pnt &Pt1, const gp_Pnt &Pt2, const Standard_Real Param, const Standard_Real U1, const Standard_Real V1, const Standard_Real U2, const Standard_Real V2, const Standard_Real PC1, const Standard_Real PC2, const gp_Vec &Tg1, const gp_Vec &Tg2, const gp_Vec2d &Tg12d, const gp_Vec2d &Tg22d)
	Creates a point on two curves on surfaces, with tangents.
	Blend_Point (const gp_Pnt &Pt1, const gp_Pnt &Pt2, const Standard_Real Param, const Standard_Real U1, const Standard_Real V1, const Standard_Real U2, const Standard_Real V2, const Standard_Real PC1, const Standard_Real PC2)
	Creates a point on two curves on surfaces, with tangents.
void	SetValue (const gp_Pnt &Pt1, const gp_Pnt &Pt2, const Standard_Real Param, const Standard_Real U1, const Standard_Real V1, const Standard_Real U2, const Standard_Real V2, const gp_Vec &Tg1, const gp_Vec &Tg2, const gp_Vec2d &Tg12d, const gp_Vec2d &Tg22d)
	Set the values for a point on 2 surfaces, with tangents.
void	SetValue (const gp_Pnt &Pt1, const gp_Pnt &Pt2, const Standard_Real Param, const Standard_Real U1, const Standard_Real V1, const Standard_Real U2, const Standard_Real V2)
	Set the values for a point on 2 surfaces, without tangents.
void	SetValue (const gp_Pnt &Pts, const gp_Pnt &Ptc, const Standard_Real Param, const Standard_Real U, const Standard_Real V, const Standard_Real W, const gp_Vec &Tgs, const gp_Vec &Tgc, const gp_Vec2d &Tg2d)
	Set the values for a point on a surface and a curve, with tangents.
void	SetValue (const gp_Pnt &Pts, const gp_Pnt &Ptc, const Standard_Real Param, const Standard_Real U, const Standard_Real V, const Standard_Real W)
	Set the values for a point on a surface and a curve, without tangents.
void	SetValue (const gp_Pnt &Pt1, const gp_Pnt &Pt2, const Standard_Real Param, const Standard_Real U1, const Standard_Real V1, const Standard_Real U2, const Standard_Real V2, const Standard_Real PC, const gp_Vec &Tg1, const gp_Vec &Tg2, const gp_Vec2d &Tg12d, const gp_Vec2d &Tg22d)
	Creates a point on a surface and a curve on surface, with tangents.
void	SetValue (const gp_Pnt &Pt1, const gp_Pnt &Pt2, const Standard_Real Param, const Standard_Real U1, const Standard_Real V1, const Standard_Real U2, const Standard_Real V2, const Standard_Real PC)
	Creates a point on a surface and a curve on surface, without tangents.
void	SetValue (const gp_Pnt &Pt1, const gp_Pnt &Pt2, const Standard_Real Param, const Standard_Real U1, const Standard_Real V1, const Standard_Real U2, const Standard_Real V2, const Standard_Real PC1, const Standard_Real PC2, const gp_Vec &Tg1, const gp_Vec &Tg2, const gp_Vec2d &Tg12d, const gp_Vec2d &Tg22d)
	Creates a point on two curves on surfaces, with tangents.
void	SetValue (const gp_Pnt &Pt1, const gp_Pnt &Pt2, const Standard_Real Param, const Standard_Real U1, const Standard_Real V1, const Standard_Real U2, const Standard_Real V2, const Standard_Real PC1, const Standard_Real PC2)
	Creates a point on two curves on surfaces, without tangents.
void	SetValue (const gp_Pnt &Pt1, const gp_Pnt &Pt2, const Standard_Real Param, const Standard_Real PC1, const Standard_Real PC2)
	Creates a point on two curves.
void	SetParameter (const Standard_Real Param)
	Changes parameter on existing point.
Standard_Real	Parameter () const
Standard_Boolean	IsTangencyPoint () const
	Returns Standard_True if it was not possible to compute the tangent vectors at PointOnS1 and/or PointOnS2.
const gp_Pnt &	PointOnS1 () const
const gp_Pnt &	PointOnS2 () const
void	ParametersOnS1 (Standard_Real &U, Standard_Real &V) const
void	ParametersOnS2 (Standard_Real &U, Standard_Real &V) const
const gp_Vec &	TangentOnS1 () const
const gp_Vec &	TangentOnS2 () const
gp_Vec2d	Tangent2dOnS1 () const
gp_Vec2d	Tangent2dOnS2 () const
const gp_Pnt &	PointOnS () const
const gp_Pnt &	PointOnC () const
void	ParametersOnS (Standard_Real &U, Standard_Real &V) const
Standard_Real	ParameterOnC () const
const gp_Vec &	TangentOnS () const
const gp_Vec &	TangentOnC () const
gp_Vec2d	Tangent2d () const
const gp_Pnt &	PointOnC1 () const
const gp_Pnt &	PointOnC2 () const
Standard_Real	ParameterOnC1 () const
Standard_Real	ParameterOnC2 () const
const gp_Vec &	TangentOnC1 () const
const gp_Vec &	TangentOnC2 () const

Constructor & Destructor Documentation

Blend_Point() [1/9]

Blend_Point::Blend_Point

(

)

Blend_Point() [2/9]

Blend_Point::Blend_Point	(	const gp_Pnt &	Pt1,
		const gp_Pnt &	Pt2,
		const Standard_Real	Param,
		const Standard_Real	U1,
		const Standard_Real	V1,
		const Standard_Real	U2,
		const Standard_Real	V2,
		const gp_Vec &	Tg1,
		const gp_Vec &	Tg2,
		const gp_Vec2d &	Tg12d,
		const gp_Vec2d &	Tg22d
	)

Creates a point on 2 surfaces, with tangents.

Blend_Point() [3/9]

Blend_Point::Blend_Point	(	const gp_Pnt &	Pt1,
		const gp_Pnt &	Pt2,
		const Standard_Real	Param,
		const Standard_Real	U1,
		const Standard_Real	V1,
		const Standard_Real	U2,
		const Standard_Real	V2
	)

Creates a point on 2 surfaces, without tangents.

Blend_Point() [4/9]

Blend_Point::Blend_Point	(	const gp_Pnt &	Pts,
		const gp_Pnt &	Ptc,
		const Standard_Real	Param,
		const Standard_Real	U,
		const Standard_Real	V,
		const Standard_Real	W,
		const gp_Vec &	Tgs,
		const gp_Vec &	Tgc,
		const gp_Vec2d &	Tg2d
	)

Creates a point on a surface and a curve, with tangents.

Blend_Point() [5/9]

Blend_Point::Blend_Point	(	const gp_Pnt &	Pts,
		const gp_Pnt &	Ptc,
		const Standard_Real	Param,
		const Standard_Real	U,
		const Standard_Real	V,
		const Standard_Real	W
	)

Creates a point on a surface and a curve, without tangents.

Blend_Point() [6/9]

Blend_Point::Blend_Point	(	const gp_Pnt &	Pt1,
		const gp_Pnt &	Pt2,
		const Standard_Real	Param,
		const Standard_Real	U1,
		const Standard_Real	V1,
		const Standard_Real	U2,
		const Standard_Real	V2,
		const Standard_Real	PC,
		const gp_Vec &	Tg1,
		const gp_Vec &	Tg2,
		const gp_Vec2d &	Tg12d,
		const gp_Vec2d &	Tg22d
	)

Creates a point on a surface and a curve on surface, with tangents.

Blend_Point() [7/9]

Blend_Point::Blend_Point	(	const gp_Pnt &	Pt1,
		const gp_Pnt &	Pt2,
		const Standard_Real	Param,
		const Standard_Real	U1,
		const Standard_Real	V1,
		const Standard_Real	U2,
		const Standard_Real	V2,
		const Standard_Real	PC
	)

Creates a point on a surface and a curve on surface, without tangents.

Blend_Point() [8/9]

Blend_Point::Blend_Point	(	const gp_Pnt &	Pt1,
		const gp_Pnt &	Pt2,
		const Standard_Real	Param,
		const Standard_Real	U1,
		const Standard_Real	V1,
		const Standard_Real	U2,
		const Standard_Real	V2,
		const Standard_Real	PC1,
		const Standard_Real	PC2,
		const gp_Vec &	Tg1,
		const gp_Vec &	Tg2,
		const gp_Vec2d &	Tg12d,
		const gp_Vec2d &	Tg22d
	)

Creates a point on two curves on surfaces, with tangents.

Blend_Point() [9/9]

Blend_Point::Blend_Point	(	const gp_Pnt &	Pt1,
		const gp_Pnt &	Pt2,
		const Standard_Real	Param,
		const Standard_Real	U1,
		const Standard_Real	V1,
		const Standard_Real	U2,
		const Standard_Real	V2,
		const Standard_Real	PC1,
		const Standard_Real	PC2
	)

Creates a point on two curves on surfaces, with tangents.

Member Function Documentation

IsTangencyPoint()

Standard_Boolean Blend_Point::IsTangencyPoint

(

)

const

Returns Standard_True if it was not possible to compute the tangent vectors at PointOnS1 and/or PointOnS2.

Parameter()

Standard_Real Blend_Point::Parameter

(

)

const

ParameterOnC()

Standard_Real Blend_Point::ParameterOnC

(

)

const

ParameterOnC1()

Standard_Real Blend_Point::ParameterOnC1

(

)

const

ParameterOnC2()

Standard_Real Blend_Point::ParameterOnC2

(

)

const

ParametersOnS()

void Blend_Point::ParametersOnS	(	Standard_Real &	U,
		Standard_Real &	V
	)		const

ParametersOnS1()

void Blend_Point::ParametersOnS1	(	Standard_Real &	U,
		Standard_Real &	V
	)		const

ParametersOnS2()

void Blend_Point::ParametersOnS2	(	Standard_Real &	U,
		Standard_Real &	V
	)		const

PointOnC()

const gp_Pnt & Blend_Point::PointOnC

(

)

const

PointOnC1()

const gp_Pnt & Blend_Point::PointOnC1

(

)

const

PointOnC2()

const gp_Pnt & Blend_Point::PointOnC2

(

)

const

PointOnS()

const gp_Pnt & Blend_Point::PointOnS

(

)

const

PointOnS1()

const gp_Pnt & Blend_Point::PointOnS1

(

)

const

PointOnS2()

const gp_Pnt & Blend_Point::PointOnS2

(

)

const

SetParameter()

void Blend_Point::SetParameter

(

const Standard_Real

Param

)

Changes parameter on existing point.

SetValue() [1/9]

void Blend_Point::SetValue	(	const gp_Pnt &	Pt1,
		const gp_Pnt &	Pt2,
		const Standard_Real	Param,
		const Standard_Real	PC1,
		const Standard_Real	PC2
	)

Creates a point on two curves.

SetValue() [2/9]

void Blend_Point::SetValue	(	const gp_Pnt &	Pt1,
		const gp_Pnt &	Pt2,
		const Standard_Real	Param,
		const Standard_Real	U1,
		const Standard_Real	V1,
		const Standard_Real	U2,
		const Standard_Real	V2
	)

Set the values for a point on 2 surfaces, without tangents.

SetValue() [3/9]

void Blend_Point::SetValue	(	const gp_Pnt &	Pt1,
		const gp_Pnt &	Pt2,
		const Standard_Real	Param,
		const Standard_Real	U1,
		const Standard_Real	V1,
		const Standard_Real	U2,
		const Standard_Real	V2,
		const gp_Vec &	Tg1,
		const gp_Vec &	Tg2,
		const gp_Vec2d &	Tg12d,
		const gp_Vec2d &	Tg22d
	)

Set the values for a point on 2 surfaces, with tangents.

SetValue() [4/9]

void Blend_Point::SetValue	(	const gp_Pnt &	Pt1,
		const gp_Pnt &	Pt2,
		const Standard_Real	Param,
		const Standard_Real	U1,
		const Standard_Real	V1,
		const Standard_Real	U2,
		const Standard_Real	V2,
		const Standard_Real	PC
	)

Creates a point on a surface and a curve on surface, without tangents.

SetValue() [5/9]

void Blend_Point::SetValue	(	const gp_Pnt &	Pt1,
		const gp_Pnt &	Pt2,
		const Standard_Real	Param,
		const Standard_Real	U1,
		const Standard_Real	V1,
		const Standard_Real	U2,
		const Standard_Real	V2,
		const Standard_Real	PC,
		const gp_Vec &	Tg1,
		const gp_Vec &	Tg2,
		const gp_Vec2d &	Tg12d,
		const gp_Vec2d &	Tg22d
	)

Creates a point on a surface and a curve on surface, with tangents.

SetValue() [6/9]

void Blend_Point::SetValue	(	const gp_Pnt &	Pt1,
		const gp_Pnt &	Pt2,
		const Standard_Real	Param,
		const Standard_Real	U1,
		const Standard_Real	V1,
		const Standard_Real	U2,
		const Standard_Real	V2,
		const Standard_Real	PC1,
		const Standard_Real	PC2
	)

Creates a point on two curves on surfaces, without tangents.

SetValue() [7/9]

void Blend_Point::SetValue	(	const gp_Pnt &	Pt1,
		const gp_Pnt &	Pt2,
		const Standard_Real	Param,
		const Standard_Real	U1,
		const Standard_Real	V1,
		const Standard_Real	U2,
		const Standard_Real	V2,
		const Standard_Real	PC1,
		const Standard_Real	PC2,
		const gp_Vec &	Tg1,
		const gp_Vec &	Tg2,
		const gp_Vec2d &	Tg12d,
		const gp_Vec2d &	Tg22d
	)

Creates a point on two curves on surfaces, with tangents.

SetValue() [8/9]

void Blend_Point::SetValue	(	const gp_Pnt &	Pts,
		const gp_Pnt &	Ptc,
		const Standard_Real	Param,
		const Standard_Real	U,
		const Standard_Real	V,
		const Standard_Real	W
	)

Set the values for a point on a surface and a curve, without tangents.

SetValue() [9/9]

void Blend_Point::SetValue	(	const gp_Pnt &	Pts,
		const gp_Pnt &	Ptc,
		const Standard_Real	Param,
		const Standard_Real	U,
		const Standard_Real	V,
		const Standard_Real	W,
		const gp_Vec &	Tgs,
		const gp_Vec &	Tgc,
		const gp_Vec2d &	Tg2d
	)

Set the values for a point on a surface and a curve, with tangents.

Tangent2d()

gp_Vec2d Blend_Point::Tangent2d

(

)

const

Tangent2dOnS1()

gp_Vec2d Blend_Point::Tangent2dOnS1

(

)

const

Tangent2dOnS2()

gp_Vec2d Blend_Point::Tangent2dOnS2

(

)

const

TangentOnC()

const gp_Vec & Blend_Point::TangentOnC

(

)

const

TangentOnC1()

const gp_Vec & Blend_Point::TangentOnC1

(

)

const

TangentOnC2()

const gp_Vec & Blend_Point::TangentOnC2

(

)

const

TangentOnS()

const gp_Vec & Blend_Point::TangentOnS

(

)

const

TangentOnS1()

const gp_Vec & Blend_Point::TangentOnS1

(

)

const

TangentOnS2()

const gp_Vec & Blend_Point::TangentOnS2

(

)

const

---

The documentation for this class was generated from the following file:

• Blend_Point.hxx