ChFi3d_ChBuilder Class Reference

construction tool for 3D chamfers on edges (on a solid). More...

#include <ChFi3d_ChBuilder.hxx>

Inheritance diagram for ChFi3d_ChBuilder:

Public Member Functions
	ChFi3d_ChBuilder (const TopoDS_Shape &S, const Standard_Real Ta=1.0e-2)
	initializes the Builder with the Shape for the computation of chamfers
void	Add (const TopoDS_Edge &E)
	initializes a contour with the edge <E> as first (the next are found by propagation ). The two distances (parameters of the chamfer) must be set after. if the edge <E> has more than 2 adjacent faces
void	Add (const Standard_Real Dis, const TopoDS_Edge &E)
	initializes a new contour with the edge <E> as first (the next are found by propagation ), and the distance <Dis> if the edge <E> has more than 2 adjacent faces
void	SetDist (const Standard_Real Dis, const Standard_Integer IC, const TopoDS_Face &F)
	set the distance <Dis> of the fillet contour of index <IC> in the DS with <Dis> on <F>. if the face <F> is not one of common faces of an edge of the contour <IC>
void	GetDist (const Standard_Integer IC, Standard_Real &Dis) const
	gives the distances <Dis> of the fillet contour of index <IC> in the DS
void	Add (const Standard_Real Dis1, const Standard_Real Dis2, const TopoDS_Edge &E, const TopoDS_Face &F)
	initializes a new contour with the edge <E> as first (the next are found by propagation ), and the distance <Dis1> and <Dis2> if the edge <E> has more than 2 adjacent faces
void	SetDists (const Standard_Real Dis1, const Standard_Real Dis2, const Standard_Integer IC, const TopoDS_Face &F)
	set the distances <Dis1> and <Dis2> of the fillet contour of index <IC> in the DS with <Dis1> on <F>. if the face <F> is not one of common faces of an edge of the contour <IC>
void	Dists (const Standard_Integer IC, Standard_Real &Dis1, Standard_Real &Dis2) const
	gives the distances <Dis1> and <Dis2> of the fillet contour of index <IC> in the DS
void	AddDA (const Standard_Real Dis, const Standard_Real Angle, const TopoDS_Edge &E, const TopoDS_Face &F)
	initializes a new contour with the edge <E> as first (the next are found by propagation ), and the distance <Dis1> and <Angle> if the edge <E> has more than 2 adjacent faces
void	SetDistAngle (const Standard_Real Dis, const Standard_Real Angle, const Standard_Integer IC, const TopoDS_Face &F)
	set the distance <Dis> and <Angle> of the fillet contour of index <IC> in the DS with <Dis> on <F>. if the face <F> is not one of common faces of an edge of the contour <IC>
void	GetDistAngle (const Standard_Integer IC, Standard_Real &Dis, Standard_Real &Angle) const
	gives the distances <Dis> and <Angle> of the fillet contour of index <IC> in the DS
void	SetMode (const ChFiDS_ChamfMode theMode)
	set the mode of shamfer
ChFiDS_ChamfMethod	IsChamfer (const Standard_Integer IC) const
	renvoi la methode des chanfreins utilisee
ChFiDS_ChamfMode	Mode () const
	returns the mode of chamfer used
void	ResetContour (const Standard_Integer IC)
	Reset tous rayons du contour IC.
void	Simulate (const Standard_Integer IC)
Standard_Integer	NbSurf (const Standard_Integer IC) const
Handle< ChFiDS_SecHArray1 >	Sect (const Standard_Integer IC, const Standard_Integer IS) const
virtual void	SimulSurf (Handle< ChFiDS_SurfData > &Data, const Handle< ChFiDS_ElSpine > &Guide, const Handle< ChFiDS_Spine > &Spine, const Standard_Integer Choix, const Handle< BRepAdaptor_Surface > &S1, const Handle< Adaptor3d_TopolTool > &I1, const Handle< BRepAdaptor_Curve2d > &PC1, const Handle< BRepAdaptor_Surface > &Sref1, const Handle< BRepAdaptor_Curve2d > &PCref1, Standard_Boolean &Decroch1, const Handle< BRepAdaptor_Surface > &S2, const Handle< Adaptor3d_TopolTool > &I2, const TopAbs_Orientation Or2, const Standard_Real Fleche, const Standard_Real TolGuide, Standard_Real &First, Standard_Real &Last, const Standard_Boolean Inside, const Standard_Boolean Appro, const Standard_Boolean Forward, const Standard_Boolean RecP, const Standard_Boolean RecS, const Standard_Boolean RecRst, const math_Vector &Soldep) override
virtual void	SimulSurf (Handle< ChFiDS_SurfData > &Data, const Handle< ChFiDS_ElSpine > &Guide, const Handle< ChFiDS_Spine > &Spine, const Standard_Integer Choix, const Handle< BRepAdaptor_Surface > &S1, const Handle< Adaptor3d_TopolTool > &I1, const TopAbs_Orientation Or1, const Handle< BRepAdaptor_Surface > &S2, const Handle< Adaptor3d_TopolTool > &I2, const Handle< BRepAdaptor_Curve2d > &PC2, const Handle< BRepAdaptor_Surface > &Sref2, const Handle< BRepAdaptor_Curve2d > &PCref2, Standard_Boolean &Decroch2, const Standard_Real Fleche, const Standard_Real TolGuide, Standard_Real &First, Standard_Real &Last, const Standard_Boolean Inside, const Standard_Boolean Appro, const Standard_Boolean Forward, const Standard_Boolean RecP, const Standard_Boolean RecS, const Standard_Boolean RecRst, const math_Vector &Soldep) override
virtual void	SimulSurf (Handle< ChFiDS_SurfData > &Data, const Handle< ChFiDS_ElSpine > &Guide, const Handle< ChFiDS_Spine > &Spine, const Standard_Integer Choix, const Handle< BRepAdaptor_Surface > &S1, const Handle< Adaptor3d_TopolTool > &I1, const Handle< BRepAdaptor_Curve2d > &PC1, const Handle< BRepAdaptor_Surface > &Sref1, const Handle< BRepAdaptor_Curve2d > &PCref1, Standard_Boolean &Decroch1, const TopAbs_Orientation Or1, const Handle< BRepAdaptor_Surface > &S2, const Handle< Adaptor3d_TopolTool > &I2, const Handle< BRepAdaptor_Curve2d > &PC2, const Handle< BRepAdaptor_Surface > &Sref2, const Handle< BRepAdaptor_Curve2d > &PCref2, Standard_Boolean &Decroch2, const TopAbs_Orientation Or2, const Standard_Real Fleche, const Standard_Real TolGuide, Standard_Real &First, Standard_Real &Last, const Standard_Boolean Inside, const Standard_Boolean Appro, const Standard_Boolean Forward, const Standard_Boolean RecP1, const Standard_Boolean RecRst1, const Standard_Boolean RecP2, const Standard_Boolean RecRst2, const math_Vector &Soldep) override
virtual Standard_Boolean	PerformSurf (ChFiDS_SequenceOfSurfData &Data, const Handle< ChFiDS_ElSpine > &Guide, const Handle< ChFiDS_Spine > &Spine, const Standard_Integer Choix, const Handle< BRepAdaptor_Surface > &S1, const Handle< Adaptor3d_TopolTool > &I1, const Handle< BRepAdaptor_Surface > &S2, const Handle< Adaptor3d_TopolTool > &I2, const Standard_Real MaxStep, const Standard_Real Fleche, const Standard_Real TolGuide, Standard_Real &First, Standard_Real &Last, const Standard_Boolean Inside, const Standard_Boolean Appro, const Standard_Boolean Forward, const Standard_Boolean RecOnS1, const Standard_Boolean RecOnS2, const math_Vector &Soldep, Standard_Integer &Intf, Standard_Integer &Intl) override
	Methode, implemented in inheritants, calculates the elements of construction of the surface (fillet or chamfer).
virtual void	PerformSurf (ChFiDS_SequenceOfSurfData &Data, const Handle< ChFiDS_ElSpine > &Guide, const Handle< ChFiDS_Spine > &Spine, const Standard_Integer Choix, const Handle< BRepAdaptor_Surface > &S1, const Handle< Adaptor3d_TopolTool > &I1, const Handle< BRepAdaptor_Curve2d > &PC1, const Handle< BRepAdaptor_Surface > &Sref1, const Handle< BRepAdaptor_Curve2d > &PCref1, Standard_Boolean &Decroch1, const Handle< BRepAdaptor_Surface > &S2, const Handle< Adaptor3d_TopolTool > &I2, const TopAbs_Orientation Or2, const Standard_Real MaxStep, const Standard_Real Fleche, const Standard_Real TolGuide, Standard_Real &First, Standard_Real &Last, const Standard_Boolean Inside, const Standard_Boolean Appro, const Standard_Boolean Forward, const Standard_Boolean RecP, const Standard_Boolean RecS, const Standard_Boolean RecRst, const math_Vector &Soldep) override
	Method, implemented in the inheritants, calculates the elements of construction of the surface (fillet or chamfer) contact edge/face.
virtual void	PerformSurf (ChFiDS_SequenceOfSurfData &Data, const Handle< ChFiDS_ElSpine > &Guide, const Handle< ChFiDS_Spine > &Spine, const Standard_Integer Choix, const Handle< BRepAdaptor_Surface > &S1, const Handle< Adaptor3d_TopolTool > &I1, const TopAbs_Orientation Or1, const Handle< BRepAdaptor_Surface > &S2, const Handle< Adaptor3d_TopolTool > &I2, const Handle< BRepAdaptor_Curve2d > &PC2, const Handle< BRepAdaptor_Surface > &Sref2, const Handle< BRepAdaptor_Curve2d > &PCref2, Standard_Boolean &Decroch2, const Standard_Real MaxStep, const Standard_Real Fleche, const Standard_Real TolGuide, Standard_Real &First, Standard_Real &Last, const Standard_Boolean Inside, const Standard_Boolean Appro, const Standard_Boolean Forward, const Standard_Boolean RecP, const Standard_Boolean RecS, const Standard_Boolean RecRst, const math_Vector &Soldep) override
	Method, implemented in inheritants, calculates the elements of construction of the surface (fillet or chamfer) contact edge/face.
virtual void	PerformSurf (ChFiDS_SequenceOfSurfData &Data, const Handle< ChFiDS_ElSpine > &Guide, const Handle< ChFiDS_Spine > &Spine, const Standard_Integer Choix, const Handle< BRepAdaptor_Surface > &S1, const Handle< Adaptor3d_TopolTool > &I1, const Handle< BRepAdaptor_Curve2d > &PC1, const Handle< BRepAdaptor_Surface > &Sref1, const Handle< BRepAdaptor_Curve2d > &PCref1, Standard_Boolean &Decroch1, const TopAbs_Orientation Or1, const Handle< BRepAdaptor_Surface > &S2, const Handle< Adaptor3d_TopolTool > &I2, const Handle< BRepAdaptor_Curve2d > &PC2, const Handle< BRepAdaptor_Surface > &Sref2, const Handle< BRepAdaptor_Curve2d > &PCref2, Standard_Boolean &Decroch2, const TopAbs_Orientation Or2, const Standard_Real MaxStep, const Standard_Real Fleche, const Standard_Real TolGuide, Standard_Real &First, Standard_Real &Last, const Standard_Boolean Inside, const Standard_Boolean Appro, const Standard_Boolean Forward, const Standard_Boolean RecP1, const Standard_Boolean RecRst1, const Standard_Boolean RecP2, const Standard_Boolean RecRst2, const math_Vector &Soldep) override
	Method, implemented in inheritants, calculates the elements of construction of the surface (fillet or chamfer) contact edge/edge.
Public Member Functions inherited from ChFi3d_Builder
virtual	~ChFi3d_Builder ()
void	SetParams (const Standard_Real Tang, const Standard_Real Tesp, const Standard_Real T2d, const Standard_Real TApp3d, const Standard_Real TolApp2d, const Standard_Real Fleche)
void	SetContinuity (const GeomAbs_Shape InternalContinuity, const Standard_Real AngularTolerance)
void	Remove (const TopoDS_Edge &E)
	extracts from the list the contour containing edge E.
Standard_Integer	Contains (const TopoDS_Edge &E) const
	gives the number of the contour containing E or 0 if E does not belong to any contour.
Standard_Integer	Contains (const TopoDS_Edge &E, Standard_Integer &IndexInSpine) const
	gives the number of the contour containing E or 0 if E does not belong to any contour. Sets in IndexInSpine the index of E in the contour if it's found
Standard_Integer	NbElements () const
	gives the number of disjoint contours on which the fillets are calculated
Handle< ChFiDS_Spine >	Value (const Standard_Integer I) const
	gives the n'th set of edges (contour) if I >NbElements()
Standard_Real	Length (const Standard_Integer IC) const
	returns the length of the contour of index IC.
TopoDS_Vertex	FirstVertex (const Standard_Integer IC) const
	returns the First vertex V of the contour of index IC.
TopoDS_Vertex	LastVertex (const Standard_Integer IC) const
	returns the Last vertex V of the contour of index IC.
Standard_Real	Abscissa (const Standard_Integer IC, const TopoDS_Vertex &V) const
	returns the abscissa of the vertex V on the contour of index IC.
Standard_Real	RelativeAbscissa (const Standard_Integer IC, const TopoDS_Vertex &V) const
	returns the relative abscissa([0.,1.]) of the vertex V on the contour of index IC.
Standard_Boolean	ClosedAndTangent (const Standard_Integer IC) const
	returns true if the contour of index IC is closed an tangent.
Standard_Boolean	Closed (const Standard_Integer IC) const
	returns true if the contour of index IC is closed
void	Compute ()
	general calculation of geometry on all edges, topologic reconstruction.
Standard_Boolean	IsDone () const
	returns True if the computation is success
TopoDS_Shape	Shape () const
	if (Isdone()) makes the result. if (!Isdone())
const TopTools_ListOfShape &	Generated (const TopoDS_Shape &EouV)
	Advanced function for the history.
Standard_Integer	NbFaultyContours () const
	Returns the number of contours on which the calculation has failed.
Standard_Integer	FaultyContour (const Standard_Integer I) const
	Returns the number of I'th contour on which the calculation has failed.
Standard_Integer	NbComputedSurfaces (const Standard_Integer IC) const
	Returns the number of surfaces calculated on the contour IC.
Handle< Geom_Surface >	ComputedSurface (const Standard_Integer IC, const Standard_Integer IS) const
	Returns the IS'th surface calculated on the contour IC.
Standard_Integer	NbFaultyVertices () const
	Returns the number of vertices on which the calculation has failed.
TopoDS_Vertex	FaultyVertex (const Standard_Integer IV) const
	Returns the IV'th vertex on which the calculation has failed.
Standard_Boolean	HasResult () const
	returns True if a partial result has been calculated
TopoDS_Shape	BadShape () const
	if (HasResult()) returns partial result if (!HasResult())
ChFiDS_ErrorStatus	StripeStatus (const Standard_Integer IC) const
	for the stripe IC ,indication on the cause of failure WalkingFailure,TwistedSurface,Error, Ok
void	Reset ()
	Reset all results of compute and returns the algorithm in the state of the last acquisition to enable modification of contours or areas.
Handle< TopOpeBRepBuild_HBuilder >	Builder () const
	Returns the Builder of topologic operations.
Standard_Boolean	SplitKPart (const Handle< ChFiDS_SurfData > &Data, ChFiDS_SequenceOfSurfData &SetData, const Handle< ChFiDS_Spine > &Spine, const Standard_Integer Iedge, const Handle< Adaptor3d_Surface > &S1, const Handle< Adaptor3d_TopolTool > &I1, const Handle< Adaptor3d_Surface > &S2, const Handle< Adaptor3d_TopolTool > &I2, Standard_Boolean &Intf, Standard_Boolean &Intl)
	Method, implemented in the inheritants, calculates the elements of construction of the surface (fillet or chamfer).
Standard_Boolean	PerformTwoCornerbyInter (const Standard_Integer Index)

Protected Member Functions
void	SimulKPart (const Handle< ChFiDS_SurfData > &SD) const override
Standard_Boolean	SimulSurf (Handle< ChFiDS_SurfData > &Data, const Handle< ChFiDS_ElSpine > &Guide, const Handle< ChFiDS_Spine > &Spine, const Standard_Integer Choix, const Handle< BRepAdaptor_Surface > &S1, const Handle< Adaptor3d_TopolTool > &I1, const Handle< BRepAdaptor_Surface > &S2, const Handle< Adaptor3d_TopolTool > &I2, const Standard_Real TolGuide, Standard_Real &First, Standard_Real &Last, const Standard_Boolean Inside, const Standard_Boolean Appro, const Standard_Boolean Forward, const Standard_Boolean RecOnS1, const Standard_Boolean RecOnS2, const math_Vector &Soldep, Standard_Integer &Intf, Standard_Integer &Intl) override
Standard_Boolean	PerformFirstSection (const Handle< ChFiDS_Spine > &S, const Handle< ChFiDS_ElSpine > &HGuide, const Standard_Integer Choix, Handle< BRepAdaptor_Surface > &S1, Handle< BRepAdaptor_Surface > &S2, const Handle< Adaptor3d_TopolTool > &I1, const Handle< Adaptor3d_TopolTool > &I2, const Standard_Real Par, math_Vector &SolDep, TopAbs_State &Pos1, TopAbs_State &Pos2) const override
void	PerformTwoCorner (const Standard_Integer Index) override
	computes the intersection of two chamfers on the vertex of index <Index> in myVDataMap.
void	PerformThreeCorner (const Standard_Integer Index) override
	computes the intersection of three chamfers on the vertex of index <Index> in myVDataMap.
void	ExtentOneCorner (const TopoDS_Vertex &V, const Handle< ChFiDS_Stripe > &S) override
	extends the spine of the Stripe at the extremity of the vertex <V>.
void	ExtentTwoCorner (const TopoDS_Vertex &V, const ChFiDS_ListOfStripe &LS) override
	extends the spine of the 2 stripes of <LS> at the extremity of the vertex <V>
void	ExtentThreeCorner (const TopoDS_Vertex &V, const ChFiDS_ListOfStripe &LS) override
	extends the spine of the 2 stripes of <LS> at the extremity of the vertex <V>
void	SetRegul () override
	set the regularities
Protected Member Functions inherited from ChFi3d_Builder
	ChFi3d_Builder (const TopoDS_Shape &S, const Standard_Real Ta)
Standard_Boolean	SimulData (Handle< ChFiDS_SurfData > &Data, const Handle< ChFiDS_ElSpine > &Guide, const Handle< ChFiDS_ElSpine > &AdditionalGuide, Handle< BRepBlend_Line > &Lin, const Handle< Adaptor3d_Surface > &S1, const Handle< Adaptor3d_TopolTool > &I1, const Handle< Adaptor3d_Surface > &S2, const Handle< Adaptor3d_TopolTool > &I2, Blend_Function &Func, Blend_FuncInv &FInv, const Standard_Real PFirst, const Standard_Real MaxStep, const Standard_Real Fleche, const Standard_Real TolGuide, Standard_Real &First, Standard_Real &Last, const Standard_Boolean Inside, const Standard_Boolean Appro, const Standard_Boolean Forward, const math_Vector &Soldep, const Standard_Integer NbSecMin, const Standard_Boolean RecOnS1=Standard_False, const Standard_Boolean RecOnS2=Standard_False)
Standard_Boolean	SimulData (Handle< ChFiDS_SurfData > &Data, const Handle< ChFiDS_ElSpine > &HGuide, Handle< BRepBlend_Line > &Lin, const Handle< Adaptor3d_Surface > &S1, const Handle< Adaptor3d_TopolTool > &I1, const Handle< Adaptor3d_Surface > &S2, const Handle< Adaptor2d_Curve2d > &PC2, const Handle< Adaptor3d_TopolTool > &I2, Standard_Boolean &Decroch, Blend_SurfRstFunction &Func, Blend_FuncInv &FInv, Blend_SurfPointFuncInv &FInvP, Blend_SurfCurvFuncInv &FInvC, const Standard_Real PFirst, const Standard_Real MaxStep, const Standard_Real Fleche, const Standard_Real TolGuide, Standard_Real &First, Standard_Real &Last, const math_Vector &Soldep, const Standard_Integer NbSecMin, const Standard_Boolean Inside, const Standard_Boolean Appro, const Standard_Boolean Forward, const Standard_Boolean RecP, const Standard_Boolean RecS, const Standard_Boolean RecRst)
Standard_Boolean	SimulData (Handle< ChFiDS_SurfData > &Data, const Handle< ChFiDS_ElSpine > &HGuide, Handle< BRepBlend_Line > &Lin, const Handle< Adaptor3d_Surface > &S1, const Handle< Adaptor2d_Curve2d > &PC1, const Handle< Adaptor3d_TopolTool > &I1, Standard_Boolean &Decroch1, const Handle< Adaptor3d_Surface > &S2, const Handle< Adaptor2d_Curve2d > &PC2, const Handle< Adaptor3d_TopolTool > &I2, Standard_Boolean &Decroch2, Blend_RstRstFunction &Func, Blend_SurfCurvFuncInv &FInv1, Blend_CurvPointFuncInv &FInvP1, Blend_SurfCurvFuncInv &FInv2, Blend_CurvPointFuncInv &FInvP2, const Standard_Real PFirst, const Standard_Real MaxStep, const Standard_Real Fleche, const Standard_Real TolGuide, Standard_Real &First, Standard_Real &Last, const math_Vector &Soldep, const Standard_Integer NbSecMin, const Standard_Boolean Inside, const Standard_Boolean Appro, const Standard_Boolean Forward, const Standard_Boolean RecP1, const Standard_Boolean RecRst1, const Standard_Boolean RecP2, const Standard_Boolean RecRst2)
Standard_Boolean	PerformElement (const Handle< ChFiDS_Spine > &CElement, const Standard_Real Offset, const TopoDS_Face &theFirstFace)
void	PerformExtremity (const Handle< ChFiDS_Spine > &CElement)
void	PerformSetOfSurf (Handle< ChFiDS_Stripe > &S, const Standard_Boolean Simul=Standard_False)
void	PerformSetOfKPart (Handle< ChFiDS_Stripe > &S, const Standard_Boolean Simul=Standard_False)
void	PerformSetOfKGen (Handle< ChFiDS_Stripe > &S, const Standard_Boolean Simul=Standard_False)
void	Trunc (const Handle< ChFiDS_SurfData > &SD, const Handle< ChFiDS_Spine > &Spine, const Handle< Adaptor3d_Surface > &S1, const Handle< Adaptor3d_Surface > &S2, const Standard_Integer iedge, const Standard_Boolean isfirst, const Standard_Integer cntlFiOnS)
void	CallPerformSurf (Handle< ChFiDS_Stripe > &Stripe, const Standard_Boolean Simul, ChFiDS_SequenceOfSurfData &SeqSD, Handle< ChFiDS_SurfData > &SD, const Handle< ChFiDS_ElSpine > &Guide, const Handle< ChFiDS_Spine > &Spine, const Handle< BRepAdaptor_Surface > &HS1, const Handle< BRepAdaptor_Surface > &HS3, const gp_Pnt2d &P1, const gp_Pnt2d &P3, const Handle< Adaptor3d_TopolTool > &I1, const Handle< BRepAdaptor_Surface > &HS2, const Handle< BRepAdaptor_Surface > &HS4, const gp_Pnt2d &P2, const gp_Pnt2d &P4, const Handle< Adaptor3d_TopolTool > &I2, const Standard_Real MaxStep, const Standard_Real Fleche, const Standard_Real TolGuide, Standard_Real &First, Standard_Real &Last, const Standard_Boolean Inside, const Standard_Boolean Appro, const Standard_Boolean Forward, const Standard_Boolean RecOnS1, const Standard_Boolean RecOnS2, math_Vector &Soldep, Standard_Integer &Intf, Standard_Integer &Intl, Handle< BRepAdaptor_Surface > &Surf1, Handle< BRepAdaptor_Surface > &Surf2)
void	PerformMoreThreeCorner (const Standard_Integer Index, const Standard_Integer nbcourb)
Standard_Boolean	SearchFace (const Handle< ChFiDS_Spine > &Sp, const ChFiDS_CommonPoint &Pc, const TopoDS_Face &FRef, TopoDS_Face &FVoi) const
Standard_Boolean	StripeOrientations (const Handle< ChFiDS_Spine > &Sp, TopAbs_Orientation &Or1, TopAbs_Orientation &Or2, Standard_Integer &ChoixConge) const
Standard_Boolean	ComputeData (Handle< ChFiDS_SurfData > &Data, const Handle< ChFiDS_ElSpine > &Guide, const Handle< ChFiDS_Spine > &Spine, Handle< BRepBlend_Line > &Lin, const Handle< Adaptor3d_Surface > &S1, const Handle< Adaptor3d_TopolTool > &I1, const Handle< Adaptor3d_Surface > &S2, const Handle< Adaptor3d_TopolTool > &I2, Blend_Function &Func, Blend_FuncInv &FInv, const Standard_Real PFirst, const Standard_Real MaxStep, const Standard_Real Fleche, const Standard_Real TolGuide, Standard_Real &First, Standard_Real &Last, const Standard_Boolean Inside, const Standard_Boolean Appro, const Standard_Boolean Forward, const math_Vector &Soldep, Standard_Integer &Intf, Standard_Integer &Intl, Standard_Boolean &Gd1, Standard_Boolean &Gd2, Standard_Boolean &Gf1, Standard_Boolean &Gf2, const Standard_Boolean RecOnS1=Standard_False, const Standard_Boolean RecOnS2=Standard_False)
	Calculates a Line of contact face/face.
Standard_Boolean	ComputeData (Handle< ChFiDS_SurfData > &Data, const Handle< ChFiDS_ElSpine > &HGuide, Handle< BRepBlend_Line > &Lin, const Handle< Adaptor3d_Surface > &S1, const Handle< Adaptor3d_TopolTool > &I1, const Handle< Adaptor3d_Surface > &S2, const Handle< Adaptor2d_Curve2d > &PC2, const Handle< Adaptor3d_TopolTool > &I2, Standard_Boolean &Decroch, Blend_SurfRstFunction &Func, Blend_FuncInv &FInv, Blend_SurfPointFuncInv &FInvP, Blend_SurfCurvFuncInv &FInvC, const Standard_Real PFirst, const Standard_Real MaxStep, const Standard_Real Fleche, const Standard_Real TolGuide, Standard_Real &First, Standard_Real &Last, const math_Vector &Soldep, const Standard_Boolean Inside, const Standard_Boolean Appro, const Standard_Boolean Forward, const Standard_Boolean RecP, const Standard_Boolean RecS, const Standard_Boolean RecRst)
	Calculates a Line of contact edge/face.
Standard_Boolean	ComputeData (Handle< ChFiDS_SurfData > &Data, const Handle< ChFiDS_ElSpine > &HGuide, Handle< BRepBlend_Line > &Lin, const Handle< Adaptor3d_Surface > &S1, const Handle< Adaptor2d_Curve2d > &PC1, const Handle< Adaptor3d_TopolTool > &I1, Standard_Boolean &Decroch1, const Handle< Adaptor3d_Surface > &S2, const Handle< Adaptor2d_Curve2d > &PC2, const Handle< Adaptor3d_TopolTool > &I2, Standard_Boolean &Decroch2, Blend_RstRstFunction &Func, Blend_SurfCurvFuncInv &FInv1, Blend_CurvPointFuncInv &FInvP1, Blend_SurfCurvFuncInv &FInv2, Blend_CurvPointFuncInv &FInvP2, const Standard_Real PFirst, const Standard_Real MaxStep, const Standard_Real Fleche, const Standard_Real TolGuide, Standard_Real &First, Standard_Real &Last, const math_Vector &Soldep, const Standard_Boolean Inside, const Standard_Boolean Appro, const Standard_Boolean Forward, const Standard_Boolean RecP1, const Standard_Boolean RecRst1, const Standard_Boolean RecP2, const Standard_Boolean RecRst2)
	Calculates a Line of contact edge/edge.
Standard_Boolean	CompleteData (Handle< ChFiDS_SurfData > &Data, Blend_Function &Func, Handle< BRepBlend_Line > &Lin, const Handle< Adaptor3d_Surface > &S1, const Handle< Adaptor3d_Surface > &S2, const TopAbs_Orientation Or1, const Standard_Boolean Gd1, const Standard_Boolean Gd2, const Standard_Boolean Gf1, const Standard_Boolean Gf2, const Standard_Boolean Reversed=Standard_False)
Standard_Boolean	CompleteData (Handle< ChFiDS_SurfData > &Data, Blend_SurfRstFunction &Func, Handle< BRepBlend_Line > &Lin, const Handle< Adaptor3d_Surface > &S1, const Handle< Adaptor3d_Surface > &S2, const TopAbs_Orientation Or, const Standard_Boolean Reversed)
Standard_Boolean	CompleteData (Handle< ChFiDS_SurfData > &Data, Blend_RstRstFunction &Func, Handle< BRepBlend_Line > &Lin, const Handle< Adaptor3d_Surface > &S1, const Handle< Adaptor3d_Surface > &S2, const TopAbs_Orientation Or)
Standard_Boolean	StoreData (Handle< ChFiDS_SurfData > &Data, const AppBlend_Approx &Approx, const Handle< BRepBlend_Line > &Lin, const Handle< Adaptor3d_Surface > &S1, const Handle< Adaptor3d_Surface > &S2, const TopAbs_Orientation Or1, const Standard_Boolean Gd1, const Standard_Boolean Gd2, const Standard_Boolean Gf1, const Standard_Boolean Gf2, const Standard_Boolean Reversed=Standard_False)
Standard_Boolean	CompleteData (Handle< ChFiDS_SurfData > &Data, const Handle< Geom_Surface > &Surfcoin, const Handle< Adaptor3d_Surface > &S1, const Handle< Geom2d_Curve > &PC1, const Handle< Adaptor3d_Surface > &S2, const Handle< Geom2d_Curve > &PC2, const TopAbs_Orientation Or, const Standard_Boolean On1, const Standard_Boolean Gd1, const Standard_Boolean Gd2, const Standard_Boolean Gf1, const Standard_Boolean Gf2)

Additional Inherited Members
Protected Attributes inherited from ChFi3d_Builder
Standard_Real	tolappangle
Standard_Real	tolesp
Standard_Real	tol2d
Standard_Real	tolapp3d
Standard_Real	tolapp2d
Standard_Real	fleche
GeomAbs_Shape	myConti
ChFiDS_Map	myEFMap
ChFiDS_Map	myESoMap
ChFiDS_Map	myEShMap
ChFiDS_Map	myVFMap
ChFiDS_Map	myVEMap
Handle< TopOpeBRepDS_HDataStructure >	myDS
Handle< TopOpeBRepBuild_HBuilder >	myCoup
ChFiDS_ListOfStripe	myListStripe
ChFiDS_StripeMap	myVDataMap
ChFiDS_Regularities	myRegul
ChFiDS_ListOfStripe	badstripes
TopTools_ListOfShape	badvertices
TopTools_DataMapOfShapeListOfInteger	myEVIMap
TopTools_DataMapOfShapeShape	myEdgeFirstFace
Standard_Boolean	done
Standard_Boolean	hasresult

Detailed Description

construction tool for 3D chamfers on edges (on a solid).

Constructor & Destructor Documentation

ChFi3d_ChBuilder()

ChFi3d_ChBuilder::ChFi3d_ChBuilder	(	const TopoDS_Shape &	S,
		const Standard_Real	Ta = 1.0e-2
	)

initializes the Builder with the Shape for the computation of chamfers

Member Function Documentation

Add() [1/3]

void ChFi3d_ChBuilder::Add	(	const Standard_Real	Dis,
		const TopoDS_Edge &	E
	)

initializes a new contour with the edge <E> as first (the next are found by propagation ), and the distance <Dis> if the edge <E> has more than 2 adjacent faces

Add() [2/3]

void ChFi3d_ChBuilder::Add	(	const Standard_Real	Dis1,
		const Standard_Real	Dis2,
		const TopoDS_Edge &	E,
		const TopoDS_Face &	F
	)

initializes a new contour with the edge <E> as first (the next are found by propagation ), and the distance <Dis1> and <Dis2> if the edge <E> has more than 2 adjacent faces

Add() [3/3]

void ChFi3d_ChBuilder::Add

(

const TopoDS_Edge &

E

)

initializes a contour with the edge <E> as first (the next are found by propagation ). The two distances (parameters of the chamfer) must be set after. if the edge <E> has more than 2 adjacent faces

AddDA()

void ChFi3d_ChBuilder::AddDA	(	const Standard_Real	Dis,
		const Standard_Real	Angle,
		const TopoDS_Edge &	E,
		const TopoDS_Face &	F
	)

initializes a new contour with the edge <E> as first (the next are found by propagation ), and the distance <Dis1> and <Angle> if the edge <E> has more than 2 adjacent faces

Dists()

void ChFi3d_ChBuilder::Dists	(	const Standard_Integer	IC,
		Standard_Real &	Dis1,
		Standard_Real &	Dis2
	)		const

gives the distances <Dis1> and <Dis2> of the fillet contour of index <IC> in the DS

ExtentOneCorner()

void ChFi3d_ChBuilder::ExtentOneCorner ( const TopoDS_Vertex &  V, const Handle< ChFiDS_Stripe > &  S  )

overrideprotectedvirtual

extends the spine of the Stripe at the extremity of the vertex <V>.

Implements ChFi3d_Builder.

ExtentThreeCorner()

void ChFi3d_ChBuilder::ExtentThreeCorner ( const TopoDS_Vertex &  V, const ChFiDS_ListOfStripe &  LS  )

overrideprotectedvirtual

extends the spine of the 2 stripes of <LS> at the extremity of the vertex <V>

Implements ChFi3d_Builder.

ExtentTwoCorner()

void ChFi3d_ChBuilder::ExtentTwoCorner ( const TopoDS_Vertex &  V, const ChFiDS_ListOfStripe &  LS  )

overrideprotectedvirtual

extends the spine of the 2 stripes of <LS> at the extremity of the vertex <V>

Implements ChFi3d_Builder.

GetDist()

void ChFi3d_ChBuilder::GetDist	(	const Standard_Integer	IC,
		Standard_Real &	Dis
	)		const

gives the distances <Dis> of the fillet contour of index <IC> in the DS

GetDistAngle()

void ChFi3d_ChBuilder::GetDistAngle	(	const Standard_Integer	IC,
		Standard_Real &	Dis,
		Standard_Real &	Angle
	)		const

gives the distances <Dis> and <Angle> of the fillet contour of index <IC> in the DS

IsChamfer()

ChFiDS_ChamfMethod ChFi3d_ChBuilder::IsChamfer

(

const Standard_Integer

IC

)

const

renvoi la methode des chanfreins utilisee

Mode()

ChFiDS_ChamfMode ChFi3d_ChBuilder::Mode

(

)

const

returns the mode of chamfer used

NbSurf()

Standard_Integer ChFi3d_ChBuilder::NbSurf

(

const Standard_Integer

IC

)

const

PerformFirstSection()

Standard_Boolean ChFi3d_ChBuilder::PerformFirstSection ( const Handle< ChFiDS_Spine > &  S, const Handle< ChFiDS_ElSpine > &  HGuide, const Standard_Integer  Choix, Handle< BRepAdaptor_Surface > &  S1, Handle< BRepAdaptor_Surface > &  S2, const Handle< Adaptor3d_TopolTool > &  I1, const Handle< Adaptor3d_TopolTool > &  I2, const Standard_Real  Par, math_Vector &  SolDep, TopAbs_State &  Pos1, TopAbs_State &  Pos2  ) const

overrideprotectedvirtual

Implements ChFi3d_Builder.

PerformSurf() [1/4]

virtual void ChFi3d_ChBuilder::PerformSurf ( ChFiDS_SequenceOfSurfData &  Data, const Handle< ChFiDS_ElSpine > &  Guide, const Handle< ChFiDS_Spine > &  Spine, const Standard_Integer  Choix, const Handle< BRepAdaptor_Surface > &  S1, const Handle< Adaptor3d_TopolTool > &  I1, const Handle< BRepAdaptor_Curve2d > &  PC1, const Handle< BRepAdaptor_Surface > &  Sref1, const Handle< BRepAdaptor_Curve2d > &  PCref1, Standard_Boolean &  Decroch1, const Handle< BRepAdaptor_Surface > &  S2, const Handle< Adaptor3d_TopolTool > &  I2, const TopAbs_Orientation  Or2, const Standard_Real  MaxStep, const Standard_Real  Fleche, const Standard_Real  TolGuide, Standard_Real &  First, Standard_Real &  Last, const Standard_Boolean  Inside, const Standard_Boolean  Appro, const Standard_Boolean  Forward, const Standard_Boolean  RecP, const Standard_Boolean  RecS, const Standard_Boolean  RecRst, const math_Vector &  Soldep  )

overridevirtual

Method, implemented in the inheritants, calculates the elements of construction of the surface (fillet or chamfer) contact edge/face.

Reimplemented from ChFi3d_Builder.

PerformSurf() [2/4]

virtual void ChFi3d_ChBuilder::PerformSurf ( ChFiDS_SequenceOfSurfData &  Data, const Handle< ChFiDS_ElSpine > &  Guide, const Handle< ChFiDS_Spine > &  Spine, const Standard_Integer  Choix, const Handle< BRepAdaptor_Surface > &  S1, const Handle< Adaptor3d_TopolTool > &  I1, const Handle< BRepAdaptor_Curve2d > &  PC1, const Handle< BRepAdaptor_Surface > &  Sref1, const Handle< BRepAdaptor_Curve2d > &  PCref1, Standard_Boolean &  Decroch1, const TopAbs_Orientation  Or1, const Handle< BRepAdaptor_Surface > &  S2, const Handle< Adaptor3d_TopolTool > &  I2, const Handle< BRepAdaptor_Curve2d > &  PC2, const Handle< BRepAdaptor_Surface > &  Sref2, const Handle< BRepAdaptor_Curve2d > &  PCref2, Standard_Boolean &  Decroch2, const TopAbs_Orientation  Or2, const Standard_Real  MaxStep, const Standard_Real  Fleche, const Standard_Real  TolGuide, Standard_Real &  First, Standard_Real &  Last, const Standard_Boolean  Inside, const Standard_Boolean  Appro, const Standard_Boolean  Forward, const Standard_Boolean  RecP1, const Standard_Boolean  RecRst1, const Standard_Boolean  RecP2, const Standard_Boolean  RecRst2, const math_Vector &  Soldep  )

overridevirtual

Method, implemented in inheritants, calculates the elements of construction of the surface (fillet or chamfer) contact edge/edge.

Reimplemented from ChFi3d_Builder.

PerformSurf() [3/4]

virtual Standard_Boolean ChFi3d_ChBuilder::PerformSurf ( ChFiDS_SequenceOfSurfData &  Data, const Handle< ChFiDS_ElSpine > &  Guide, const Handle< ChFiDS_Spine > &  Spine, const Standard_Integer  Choix, const Handle< BRepAdaptor_Surface > &  S1, const Handle< Adaptor3d_TopolTool > &  I1, const Handle< BRepAdaptor_Surface > &  S2, const Handle< Adaptor3d_TopolTool > &  I2, const Standard_Real  MaxStep, const Standard_Real  Fleche, const Standard_Real  TolGuide, Standard_Real &  First, Standard_Real &  Last, const Standard_Boolean  Inside, const Standard_Boolean  Appro, const Standard_Boolean  Forward, const Standard_Boolean  RecOnS1, const Standard_Boolean  RecOnS2, const math_Vector &  Soldep, Standard_Integer &  Intf, Standard_Integer &  Intl  )

overridevirtual

Methode, implemented in inheritants, calculates the elements of construction of the surface (fillet or chamfer).

Implements ChFi3d_Builder.

PerformSurf() [4/4]

virtual void ChFi3d_ChBuilder::PerformSurf ( ChFiDS_SequenceOfSurfData &  Data, const Handle< ChFiDS_ElSpine > &  Guide, const Handle< ChFiDS_Spine > &  Spine, const Standard_Integer  Choix, const Handle< BRepAdaptor_Surface > &  S1, const Handle< Adaptor3d_TopolTool > &  I1, const TopAbs_Orientation  Or1, const Handle< BRepAdaptor_Surface > &  S2, const Handle< Adaptor3d_TopolTool > &  I2, const Handle< BRepAdaptor_Curve2d > &  PC2, const Handle< BRepAdaptor_Surface > &  Sref2, const Handle< BRepAdaptor_Curve2d > &  PCref2, Standard_Boolean &  Decroch2, const Standard_Real  MaxStep, const Standard_Real  Fleche, const Standard_Real  TolGuide, Standard_Real &  First, Standard_Real &  Last, const Standard_Boolean  Inside, const Standard_Boolean  Appro, const Standard_Boolean  Forward, const Standard_Boolean  RecP, const Standard_Boolean  RecS, const Standard_Boolean  RecRst, const math_Vector &  Soldep  )

overridevirtual

Method, implemented in inheritants, calculates the elements of construction of the surface (fillet or chamfer) contact edge/face.

Reimplemented from ChFi3d_Builder.

PerformThreeCorner()

void ChFi3d_ChBuilder::PerformThreeCorner ( const Standard_Integer  Index )

overrideprotectedvirtual

computes the intersection of three chamfers on the vertex of index <Index> in myVDataMap.

Implements ChFi3d_Builder.

PerformTwoCorner()

void ChFi3d_ChBuilder::PerformTwoCorner ( const Standard_Integer  Index )

overrideprotectedvirtual

computes the intersection of two chamfers on the vertex of index <Index> in myVDataMap.

Implements ChFi3d_Builder.

ResetContour()

void ChFi3d_ChBuilder::ResetContour

(

const Standard_Integer

IC

)

Reset tous rayons du contour IC.

Sect()

Handle< ChFiDS_SecHArray1 > ChFi3d_ChBuilder::Sect	(	const Standard_Integer	IC,
		const Standard_Integer	IS
	)		const

SetDist()

void ChFi3d_ChBuilder::SetDist	(	const Standard_Real	Dis,
		const Standard_Integer	IC,
		const TopoDS_Face &	F
	)

set the distance <Dis> of the fillet contour of index <IC> in the DS with <Dis> on <F>. if the face <F> is not one of common faces of an edge of the contour <IC>

SetDistAngle()

void ChFi3d_ChBuilder::SetDistAngle	(	const Standard_Real	Dis,
		const Standard_Real	Angle,
		const Standard_Integer	IC,
		const TopoDS_Face &	F
	)

set the distance <Dis> and <Angle> of the fillet contour of index <IC> in the DS with <Dis> on <F>. if the face <F> is not one of common faces of an edge of the contour <IC>

SetDists()

void ChFi3d_ChBuilder::SetDists	(	const Standard_Real	Dis1,
		const Standard_Real	Dis2,
		const Standard_Integer	IC,
		const TopoDS_Face &	F
	)

set the distances <Dis1> and <Dis2> of the fillet contour of index <IC> in the DS with <Dis1> on <F>. if the face <F> is not one of common faces of an edge of the contour <IC>

SetMode()

void ChFi3d_ChBuilder::SetMode

(

const ChFiDS_ChamfMode

theMode

)

set the mode of shamfer

SetRegul()

void ChFi3d_ChBuilder::SetRegul ( )

overrideprotectedvirtual

set the regularities

Implements ChFi3d_Builder.

Simulate()

void ChFi3d_ChBuilder::Simulate

(

const Standard_Integer

IC

)

SimulKPart()

void ChFi3d_ChBuilder::SimulKPart ( const Handle< ChFiDS_SurfData > &  SD ) const

overrideprotectedvirtual

Implements ChFi3d_Builder.

SimulSurf() [1/4]

virtual void ChFi3d_ChBuilder::SimulSurf ( Handle< ChFiDS_SurfData > &  Data, const Handle< ChFiDS_ElSpine > &  Guide, const Handle< ChFiDS_Spine > &  Spine, const Standard_Integer  Choix, const Handle< BRepAdaptor_Surface > &  S1, const Handle< Adaptor3d_TopolTool > &  I1, const Handle< BRepAdaptor_Curve2d > &  PC1, const Handle< BRepAdaptor_Surface > &  Sref1, const Handle< BRepAdaptor_Curve2d > &  PCref1, Standard_Boolean &  Decroch1, const Handle< BRepAdaptor_Surface > &  S2, const Handle< Adaptor3d_TopolTool > &  I2, const TopAbs_Orientation  Or2, const Standard_Real  Fleche, const Standard_Real  TolGuide, Standard_Real &  First, Standard_Real &  Last, const Standard_Boolean  Inside, const Standard_Boolean  Appro, const Standard_Boolean  Forward, const Standard_Boolean  RecP, const Standard_Boolean  RecS, const Standard_Boolean  RecRst, const math_Vector &  Soldep  )

overridevirtual

Reimplemented from ChFi3d_Builder.

SimulSurf() [2/4]

virtual void ChFi3d_ChBuilder::SimulSurf ( Handle< ChFiDS_SurfData > &  Data, const Handle< ChFiDS_ElSpine > &  Guide, const Handle< ChFiDS_Spine > &  Spine, const Standard_Integer  Choix, const Handle< BRepAdaptor_Surface > &  S1, const Handle< Adaptor3d_TopolTool > &  I1, const Handle< BRepAdaptor_Curve2d > &  PC1, const Handle< BRepAdaptor_Surface > &  Sref1, const Handle< BRepAdaptor_Curve2d > &  PCref1, Standard_Boolean &  Decroch1, const TopAbs_Orientation  Or1, const Handle< BRepAdaptor_Surface > &  S2, const Handle< Adaptor3d_TopolTool > &  I2, const Handle< BRepAdaptor_Curve2d > &  PC2, const Handle< BRepAdaptor_Surface > &  Sref2, const Handle< BRepAdaptor_Curve2d > &  PCref2, Standard_Boolean &  Decroch2, const TopAbs_Orientation  Or2, const Standard_Real  Fleche, const Standard_Real  TolGuide, Standard_Real &  First, Standard_Real &  Last, const Standard_Boolean  Inside, const Standard_Boolean  Appro, const Standard_Boolean  Forward, const Standard_Boolean  RecP1, const Standard_Boolean  RecRst1, const Standard_Boolean  RecP2, const Standard_Boolean  RecRst2, const math_Vector &  Soldep  )

overridevirtual

Reimplemented from ChFi3d_Builder.

SimulSurf() [3/4]

Standard_Boolean ChFi3d_ChBuilder::SimulSurf ( Handle< ChFiDS_SurfData > &  Data, const Handle< ChFiDS_ElSpine > &  Guide, const Handle< ChFiDS_Spine > &  Spine, const Standard_Integer  Choix, const Handle< BRepAdaptor_Surface > &  S1, const Handle< Adaptor3d_TopolTool > &  I1, const Handle< BRepAdaptor_Surface > &  S2, const Handle< Adaptor3d_TopolTool > &  I2, const Standard_Real  TolGuide, Standard_Real &  First, Standard_Real &  Last, const Standard_Boolean  Inside, const Standard_Boolean  Appro, const Standard_Boolean  Forward, const Standard_Boolean  RecOnS1, const Standard_Boolean  RecOnS2, const math_Vector &  Soldep, Standard_Integer &  Intf, Standard_Integer &  Intl  )

overrideprotectedvirtual

Implements ChFi3d_Builder.

SimulSurf() [4/4]

virtual void ChFi3d_ChBuilder::SimulSurf ( Handle< ChFiDS_SurfData > &  Data, const Handle< ChFiDS_ElSpine > &  Guide, const Handle< ChFiDS_Spine > &  Spine, const Standard_Integer  Choix, const Handle< BRepAdaptor_Surface > &  S1, const Handle< Adaptor3d_TopolTool > &  I1, const TopAbs_Orientation  Or1, const Handle< BRepAdaptor_Surface > &  S2, const Handle< Adaptor3d_TopolTool > &  I2, const Handle< BRepAdaptor_Curve2d > &  PC2, const Handle< BRepAdaptor_Surface > &  Sref2, const Handle< BRepAdaptor_Curve2d > &  PCref2, Standard_Boolean &  Decroch2, const Standard_Real  Fleche, const Standard_Real  TolGuide, Standard_Real &  First, Standard_Real &  Last, const Standard_Boolean  Inside, const Standard_Boolean  Appro, const Standard_Boolean  Forward, const Standard_Boolean  RecP, const Standard_Boolean  RecS, const Standard_Boolean  RecRst, const math_Vector &  Soldep  )

overridevirtual

Reimplemented from ChFi3d_Builder.

---

The documentation for this class was generated from the following file:

• ChFi3d_ChBuilder.hxx