DrawFairCurve_Batten Class Reference

Interactive Draw object of type "Batten". More...

#include <DrawFairCurve_Batten.hxx>

Inheritance diagram for DrawFairCurve_Batten:

Public Member Functions
	DrawFairCurve_Batten (const Standard_Address TheBatten)
void	Compute ()
void	SetPoint (const Standard_Integer Side, const gp_Pnt2d &Point)
void	SetAngle (const Standard_Integer Side, const Standard_Real Angle)
void	SetSliding (const Standard_Real Length)
void	SetHeight (const Standard_Real Heigth)
void	SetSlope (const Standard_Real Slope)
Standard_Real	GetAngle (const Standard_Integer Side) const
Standard_Real	GetSliding () const
void	FreeSliding ()
void	FreeAngle (const Standard_Integer Side)
virtual void	Dump (Standard_OStream &S) const override
	For variable dump.
Public Member Functions inherited from DrawTrSurf_BSplineCurve2d
	DrawTrSurf_BSplineCurve2d (const Handle< Geom2d_BSplineCurve > &C)
	creates a drawable BSpline curve from a BSpline curve of package Geom2d.
	DrawTrSurf_BSplineCurve2d (const Handle< Geom2d_BSplineCurve > &C, const Draw_Color &CurvColor, const Draw_Color &PolesColor, const Draw_Color &KnotsColor, const Draw_MarkerShape KnotsShape, const Standard_Integer KnotsSize, const Standard_Boolean ShowPoles, const Standard_Boolean ShowKnots, const Standard_Integer Discret)
virtual void	DrawOn (Draw_Display &dis) const override
	this is defined only to tell C++ not to complain about inheriting a pure virtual method.
void	ShowPoles ()
void	ShowKnots ()
void	ClearPoles ()
void	ClearKnots ()
void	FindPole (const Standard_Real X, const Standard_Real Y, const Draw_Display &D, const Standard_Real Prec, Standard_Integer &Index) const
	Returns in <Index> the index of the first pole of the curve projected by the Display <D> at a distance lower than <Prec> from <X,Y>. If no pole is found index is set to 0, else index is always greater than the input value of index.
void	FindKnot (const Standard_Real X, const Standard_Real Y, const Draw_Display &D, const Standard_Real Prec, Standard_Integer &Index) const
void	SetPolesColor (const Draw_Color &theColor)
void	SetKnotsColor (const Draw_Color &theColor)
void	SetKnotsShape (const Draw_MarkerShape theShape)
Draw_MarkerShape	KnotsShape () const
Draw_Color	KnotsColor () const
Draw_Color	PolesColor () const
virtual Handle< Draw_Drawable3D >	Copy () const override
	For variable copy.
Public Member Functions inherited from DrawTrSurf_Curve2d
	DrawTrSurf_Curve2d (const Handle< Geom2d_Curve > &C, const Standard_Boolean DispOrigin=Standard_True)
	creates a drawable curve from a curve of package Geom2d.
	DrawTrSurf_Curve2d (const Handle< Geom2d_Curve > &C, const Draw_Color &aColor, const Standard_Integer Discret, const Standard_Boolean DispOrigin=Standard_True, const Standard_Boolean DispCurvRadius=Standard_False, const Standard_Real RadiusMax=1.0e3, const Standard_Real RatioOfRadius=0.1)
Handle< Geom2d_Curve >	GetCurve () const
void	SetColor (const Draw_Color &theColor)
void	ShowCurvature ()
void	ClearCurvature ()
void	SetRadiusMax (const Standard_Real theRadius)
void	SetRadiusRatio (const Standard_Real theRatio)
Draw_Color	Color () const
Standard_Real	RadiusMax () const
Standard_Real	RadiusRatio () const
virtual void	Save (Standard_OStream &theStream) const override
	Save drawable into stream.
virtual Standard_Boolean	Is3D () const override
	Returns False.
virtual void	Whatis (Draw_Interpretor &I) const override
	For variable whatis command. Set as a result the type of the variable.
Public Member Functions inherited from DrawTrSurf_Drawable
void	DrawCurve2dOn (Adaptor2d_Curve2d &C, Draw_Display &D) const
	Draw a polygon of the curve on the Display.
void	DrawCurveOn (Adaptor3d_Curve &C, Draw_Display &D) const
	Draw a polygon of the curve on the Display.
void	DrawIsoCurveOn (Adaptor3d_IsoCurve &C, const GeomAbs_IsoType T, const Standard_Real P, const Standard_Real F, const Standard_Real L, Draw_Display &D) const
	Load C with the specified iso and Draw a polygon of the curve on the Display.
void	SetDiscretisation (const Standard_Integer theDiscret)
Standard_Integer	GetDiscretisation () const
void	SetDeflection (const Standard_Real theDeflection)
Standard_Real	GetDeflection () const
void	SetDrawMode (const Standard_Integer theDrawMode)
Standard_Integer	GetDrawMode () const
Public Member Functions inherited from Draw_Drawable3D
virtual Standard_Boolean	PickReject (const Standard_Real X, const Standard_Real Y, const Standard_Real Prec) const
	Returns True if the pick is outside the box.
virtual bool	IsDisplayable () const
	Return TRUE if object can be displayed.
void	SetBounds (const Standard_Real theXMin, const Standard_Real theXMax, const Standard_Real theYMin, const Standard_Real theYMax)
void	Bounds (Standard_Real &theXMin, Standard_Real &theXMax, Standard_Real &theYMin, Standard_Real &theYMax) const
Standard_Boolean	Visible () const
void	Visible (const Standard_Boolean V)
Standard_Boolean	Protected () const
void	Protected (const Standard_Boolean P)
Standard_CString	Name () const
virtual void	Name (const Standard_CString N)
Public Member Functions inherited from Standard_Transient
	Standard_Transient ()
	Empty constructor.
	Standard_Transient (const Standard_Transient &)
	Copy constructor – does nothing.
Standard_Transient &	operator= (const Standard_Transient &)
	Assignment operator, needed to avoid copying reference counter.
virtual	~Standard_Transient ()
	Destructor must be virtual.
virtual const opencascade::handle< Standard_Type > &	DynamicType () const
	Returns a type descriptor about this object.
Standard_Boolean	IsInstance (const opencascade::handle< Standard_Type > &theType) const
	Returns a true value if this is an instance of Type.
Standard_Boolean	IsInstance (const Standard_CString theTypeName) const
	Returns a true value if this is an instance of TypeName.
Standard_Boolean	IsKind (const opencascade::handle< Standard_Type > &theType) const
	Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism.
Standard_Boolean	IsKind (const Standard_CString theTypeName) const
	Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism.
Standard_Transient *	This () const
	Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero.
Standard_Integer	GetRefCount () const noexcept
	Get the reference counter of this object.
void	IncrementRefCounter () noexcept
	Increments the reference counter of this object.
Standard_Integer	DecrementRefCounter () noexcept
	Decrements the reference counter of this object; returns the decremented value.
virtual void	Delete () const
	Memory deallocator for transient classes.

Protected Attributes
Standard_Address	MyBatten
Protected Attributes inherited from DrawTrSurf_Curve2d
Handle< Geom2d_Curve >	curv
Draw_Color	look
Standard_Boolean	disporigin
Standard_Boolean	dispcurvradius
Standard_Real	radiusmax
Standard_Real	radiusratio

Additional Inherited Members
Public Types inherited from Draw_Drawable3D
typedef Handle< Draw_Drawable3D >(*	FactoryFunction_t) (Standard_IStream &theStream)
	Function type for restoring drawable from stream.
Public Types inherited from Standard_Transient
typedef void	base_type
	Returns a type descriptor about this object.
Static Public Member Functions inherited from Draw_Drawable3D
static void	RegisterFactory (const Standard_CString theType, const FactoryFunction_t &theFactory)
	Register factory for restoring drawable from stream (opposite to Draw_Drawable3D::Save()).
static Handle< Draw_Drawable3D >	Restore (const Standard_CString theType, Standard_IStream &theStream)
	Restore drawable from stream (opposite to Draw_Drawable3D::Save()).
Static Public Member Functions inherited from Standard_Transient
static constexpr const char *	get_type_name ()
	Returns a type descriptor about this object.
static const opencascade::handle< Standard_Type > &	get_type_descriptor ()
	Returns type descriptor of Standard_Transient class.
Protected Member Functions inherited from DrawTrSurf_Drawable
	DrawTrSurf_Drawable (const Standard_Integer discret, const Standard_Real deflection=0.01, const Standard_Integer DrawMode=0)
	set the number of points on a curve at creation.
Protected Member Functions inherited from Draw_Drawable3D
	Draw_Drawable3D ()

Detailed Description

Interactive Draw object of type "Batten".

Constructor & Destructor Documentation

DrawFairCurve_Batten()

DrawFairCurve_Batten::DrawFairCurve_Batten

(

const Standard_Address

TheBatten

)

Member Function Documentation

Compute()

void DrawFairCurve_Batten::Compute

(

)

Dump()

virtual void DrawFairCurve_Batten::Dump ( Standard_OStream &  S ) const

overridevirtual

For variable dump.

Reimplemented from DrawTrSurf_Curve2d.

FreeAngle()

void DrawFairCurve_Batten::FreeAngle

(

const Standard_Integer

Side

)

FreeSliding()

void DrawFairCurve_Batten::FreeSliding

(

)

GetAngle()

Standard_Real DrawFairCurve_Batten::GetAngle

(

const Standard_Integer

Side

)

const

GetSliding()

Standard_Real DrawFairCurve_Batten::GetSliding

(

)

const

SetAngle()

void DrawFairCurve_Batten::SetAngle	(	const Standard_Integer	Side,
		const Standard_Real	Angle
	)

SetHeight()

void DrawFairCurve_Batten::SetHeight

(

const Standard_Real

Heigth

)

SetPoint()

void DrawFairCurve_Batten::SetPoint	(	const Standard_Integer	Side,
		const gp_Pnt2d &	Point
	)

SetSliding()

void DrawFairCurve_Batten::SetSliding

(

const Standard_Real

Length

)

SetSlope()

void DrawFairCurve_Batten::SetSlope

(

const Standard_Real

Slope

)

Field Documentation

MyBatten

Standard_Address DrawFairCurve_Batten::MyBatten

protected

---

The documentation for this class was generated from the following file:

• DrawFairCurve_Batten.hxx