Describes a portion of a curve (termed the "basis curve") limited by two parameter values inside the parametric domain of the basis curve. The trimmed curve is defined by: More...

#include <Geom_TrimmedCurve.hxx>

Inheritance diagram for Geom_TrimmedCurve:

[legend]

Public Member Functions
	Geom_TrimmedCurve (const Handle< Geom_Curve > &C, const Standard_Real U1, const Standard_Real U2, const Standard_Boolean Sense=Standard_True, const Standard_Boolean theAdjustPeriodic=Standard_True)
	Constructs a trimmed curve from the basis curve C which is limited between parameter values U1 and U2. Note: - U1 can be greater or less than U2; in both cases, the returned curve is oriented from U1 to U2.

void	Reverse () override
	Changes the orientation of this trimmed curve. As a result:

Standard_Real	ReversedParameter (const Standard_Real U) const override
	Computes the parameter on the reversed curve for the point of parameter U on this trimmed curve.

void	SetTrim (const Standard_Real U1, const Standard_Real U2, const Standard_Boolean Sense=Standard_True, const Standard_Boolean theAdjustPeriodic=Standard_True)
	Changes this trimmed curve, by redefining the parameter values U1 and U2 which limit its basis curve. Note: If the basis curve is periodic, the trimmed curve has the same orientation as the basis curve if Sense is true (default value) or the opposite orientation if Sense is false. Warning If the basis curve is periodic and theAdjustPeriodic is True, the bounds of the trimmed curve may be different from U1 and U2 if the parametric origin of the basis curve is within the arc of the trimmed curve. In this case, the modified parameter will be equal to U1 or U2 plus or minus the period. When theAdjustPeriodic is False, parameters U1 and U2 will be the same, without adjustment into the first period. Exceptions Standard_ConstructionError if:

Handle< Geom_Curve >	BasisCurve () const
	Returns the basis curve. Warning This function does not return a constant reference. Consequently, any modification of the returned value directly modifies the trimmed curve.

GeomAbs_Shape	Continuity () const override
	Returns the continuity of the curve : C0 : only geometric continuity, C1 : continuity of the first derivative all along the Curve, C2 : continuity of the second derivative all along the Curve, C3 : continuity of the third derivative all along the Curve, CN : the order of continuity is infinite.

Standard_Boolean	IsCN (const Standard_Integer N) const override
	Returns true if the degree of continuity of the basis curve of this trimmed curve is at least N. A trimmed curve is at least "C0" continuous. Warnings : The continuity of the trimmed curve can be greater than the continuity of the basis curve because you consider only a part of the basis curve. Raised if N < 0.

gp_Pnt	EndPoint () const override
	Returns the end point of <me>. This point is the evaluation of the curve for the "LastParameter".

Standard_Real	FirstParameter () const override
	Returns the value of the first parameter of <me>. The first parameter is the parameter of the "StartPoint" of the trimmed curve.

Standard_Boolean	IsClosed () const override
	Returns True if the distance between the StartPoint and the EndPoint is lower or equal to Resolution from package gp.

Standard_Boolean	IsPeriodic () const override
	Always returns FALSE (independently of the type of basis curve).

virtual Standard_Real	Period () const override
	Returns the period of the basis curve of this trimmed curve. Exceptions Standard_NoSuchObject if the basis curve is not periodic.

Standard_Real	LastParameter () const override
	Returns the value of the last parameter of <me>. The last parameter is the parameter of the "EndPoint" of the trimmed curve.

gp_Pnt	StartPoint () const override
	Returns the start point of <me>. This point is the evaluation of the curve from the "FirstParameter". value and derivatives Warnings : The returned derivatives have the same orientation as the derivatives of the basis curve even if the trimmed curve has not the same orientation as the basis curve.

void	D0 (const Standard_Real U, gp_Pnt &P) const override
	Returns in P the point of parameter U.

void	D1 (const Standard_Real U, gp_Pnt &P, gp_Vec &V1) const override
	Raised if the continuity of the curve is not C1.

void	D2 (const Standard_Real U, gp_Pnt &P, gp_Vec &V1, gp_Vec &V2) const override
	Raised if the continuity of the curve is not C2.

void	D3 (const Standard_Real U, gp_Pnt &P, gp_Vec &V1, gp_Vec &V2, gp_Vec &V3) const override
	Raised if the continuity of the curve is not C3.

gp_Vec	DN (const Standard_Real U, const Standard_Integer N) const override
	N is the order of derivation. Raised if the continuity of the curve is not CN. Raised if N < 1. geometric transformations.

void	Transform (const gp_Trsf &T) override
	Applies the transformation T to this trimmed curve. Warning The basis curve is also modified.

virtual Standard_Real	TransformedParameter (const Standard_Real U, const gp_Trsf &T) const override
	Returns the parameter on the transformed curve for the transform of the point of parameter U on <me>.

virtual Standard_Real	ParametricTransformation (const gp_Trsf &T) const override
	Returns a coefficient to compute the parameter on the transformed curve for the transform of the point on <me>.

Handle< Geom_Geometry >	Copy () const override
	Creates a new object which is a copy of this trimmed curve.

virtual void	DumpJson (Standard_OStream &theOStream, Standard_Integer theDepth=-1) const override
	Dumps the content of me into the stream.

Public Member Functions inherited from Geom_Curve
Handle< Geom_Curve >	Reversed () const
	Returns a copy of <me> reversed.

gp_Pnt	Value (const Standard_Real U) const
	Computes the point of parameter U on <me>. If the curve is periodic then the returned point is P(U) with U = Ustart + (U - Uend) where Ustart and Uend are the parametric bounds of the curve. it is implemented with D0.

Public Member Functions inherited from Geom_Geometry
void	Mirror (const gp_Pnt &P)
	Performs the symmetrical transformation of a Geometry with respect to the point P which is the center of the symmetry.

void	Mirror (const gp_Ax1 &A1)
	Performs the symmetrical transformation of a Geometry with respect to an axis placement which is the axis of the symmetry.

void	Mirror (const gp_Ax2 &A2)
	Performs the symmetrical transformation of a Geometry with respect to a plane. The axis placement A2 locates the plane of the symmetry : (Location, XDirection, YDirection).

void	Rotate (const gp_Ax1 &A1, const Standard_Real Ang)
	Rotates a Geometry. A1 is the axis of the rotation. Ang is the angular value of the rotation in radians.

void	Scale (const gp_Pnt &P, const Standard_Real S)
	Scales a Geometry. S is the scaling value.

void	Translate (const gp_Vec &V)
	Translates a Geometry. V is the vector of the translation.

void	Translate (const gp_Pnt &P1, const gp_Pnt &P2)
	Translates a Geometry from the point P1 to the point P2.

Handle< Geom_Geometry >	Mirrored (const gp_Pnt &P) const

Handle< Geom_Geometry >	Mirrored (const gp_Ax1 &A1) const

Handle< Geom_Geometry >	Mirrored (const gp_Ax2 &A2) const

Handle< Geom_Geometry >	Rotated (const gp_Ax1 &A1, const Standard_Real Ang) const

Handle< Geom_Geometry >	Scaled (const gp_Pnt &P, const Standard_Real S) const

Handle< Geom_Geometry >	Transformed (const gp_Trsf &T) const

Handle< Geom_Geometry >	Translated (const gp_Vec &V) const

Handle< Geom_Geometry >	Translated (const gp_Pnt &P1, const gp_Pnt &P2) const

Public Member Functions inherited from Standard_Transient
	Standard_Transient ()
	Empty constructor.

	Standard_Transient (const Standard_Transient &)
	Copy constructor – does nothing.

Standard_Transient &	operator= (const Standard_Transient &)
	Assignment operator, needed to avoid copying reference counter.

virtual	~Standard_Transient ()
	Destructor must be virtual.

virtual const opencascade::handle< Standard_Type > &	DynamicType () const
	Returns a type descriptor about this object.

Standard_Boolean	IsInstance (const opencascade::handle< Standard_Type > &theType) const
	Returns a true value if this is an instance of Type.

Standard_Boolean	IsInstance (const Standard_CString theTypeName) const
	Returns a true value if this is an instance of TypeName.

Standard_Boolean	IsKind (const opencascade::handle< Standard_Type > &theType) const
	Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism.

Standard_Boolean	IsKind (const Standard_CString theTypeName) const
	Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism.

Standard_Transient *	This () const
	Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero.

Standard_Integer	GetRefCount () const noexcept
	Get the reference counter of this object.

void	IncrementRefCounter () noexcept
	Increments the reference counter of this object.

Standard_Integer	DecrementRefCounter () noexcept
	Decrements the reference counter of this object; returns the decremented value.

virtual void	Delete () const
	Memory deallocator for transient classes.

Additional Inherited Members
Public Types inherited from Standard_Transient
typedef void	base_type
	Returns a type descriptor about this object.

Static Public Member Functions inherited from Standard_Transient
static constexpr const char *	get_type_name ()
	Returns a type descriptor about this object.

static const opencascade::handle< Standard_Type > &	get_type_descriptor ()
	Returns type descriptor of Standard_Transient class.

Detailed Description

Describes a portion of a curve (termed the "basis curve") limited by two parameter values inside the parametric domain of the basis curve. The trimmed curve is defined by:

the basis curve, and
the two parameter values which limit it. The trimmed curve can either have the same orientation as the basis curve or the opposite orientation.

Constructor & Destructor Documentation

◆ Geom_TrimmedCurve()

Geom_TrimmedCurve::Geom_TrimmedCurve	(	const Handle< Geom_Curve > &	C,
		const Standard_Real	U1,
		const Standard_Real	U2,
		const Standard_Boolean	Sense = `Standard_True`,
		const Standard_Boolean	theAdjustPeriodic = `Standard_True`
	)

Constructs a trimmed curve from the basis curve C which is limited between parameter values U1 and U2. Note: - U1 can be greater or less than U2; in both cases, the returned curve is oriented from U1 to U2.

If the basis curve C is periodic, there is an ambiguity because two parts are available. In this case, the trimmed curve has the same orientation as the basis curve if Sense is true (default value) or the opposite orientation if Sense is false.
If the curve is closed but not periodic, it is not possible to keep the part of the curve which includes the junction point (except if the junction point is at the beginning or at the end of the trimmed curve). If you tried to do this, you could alter the fundamental characteristics of the basis curve, which are used, for example, to compute the derivatives of the trimmed curve. The rules for a closed curve are therefore the same as those for an open curve. Warning: The trimmed curve is built from a copy of curve C. Therefore, when C is modified, the trimmed curve is not modified.
If the basis curve is periodic and theAdjustPeriodic is True, the bounds of the trimmed curve may be different from U1 and U2 if the parametric origin of the basis curve is within the arc of the trimmed curve. In this case, the modified parameter will be equal to U1 or U2 plus or minus the period. When theAdjustPeriodic is False, parameters U1 and U2 will be the same, without adjustment into the first period. Exceptions Standard_ConstructionError if:
C is not periodic and U1 or U2 is outside the bounds of C, or
U1 is equal to U2.

Member Function Documentation

◆ BasisCurve()

Handle< Geom_Curve > Geom_TrimmedCurve::BasisCurve ( ) const

Returns the basis curve. Warning This function does not return a constant reference. Consequently, any modification of the returned value directly modifies the trimmed curve.

◆ Continuity()

GeomAbs_Shape Geom_TrimmedCurve::Continuity ( ) const

overridevirtual

Returns the continuity of the curve : C0 : only geometric continuity, C1 : continuity of the first derivative all along the Curve, C2 : continuity of the second derivative all along the Curve, C3 : continuity of the third derivative all along the Curve, CN : the order of continuity is infinite.

Implements Geom_Curve.

◆ Copy()

Handle< Geom_Geometry > Geom_TrimmedCurve::Copy ( ) const

overridevirtual

Creates a new object which is a copy of this trimmed curve.

Implements Geom_Geometry.

◆ D0()

void Geom_TrimmedCurve::D0	(	const Standard_Real	U,
		gp_Pnt &	P
	)		const

overridevirtual

Returns in P the point of parameter U.

If the basis curve is an OffsetCurve sometimes it is not possible to do the evaluation of the curve at the parameter U (see class OffsetCurve).

Implements Geom_Curve.

◆ D1()

void Geom_TrimmedCurve::D1	(	const Standard_Real	U,
		gp_Pnt &	P,
		gp_Vec &	V1
	)		const

overridevirtual

Raised if the continuity of the curve is not C1.

Implements Geom_Curve.

◆ D2()

void Geom_TrimmedCurve::D2	(	const Standard_Real	U,
		gp_Pnt &	P,
		gp_Vec &	V1,
		gp_Vec &	V2
	)		const

overridevirtual

Raised if the continuity of the curve is not C2.

Implements Geom_Curve.

◆ D3()

void Geom_TrimmedCurve::D3	(	const Standard_Real	U,
		gp_Pnt &	P,
		gp_Vec &	V1,
		gp_Vec &	V2,
		gp_Vec &	V3
	)		const

overridevirtual

Raised if the continuity of the curve is not C3.

Implements Geom_Curve.

◆ DN()

gp_Vec Geom_TrimmedCurve::DN	(	const Standard_Real	U,
		const Standard_Integer	N
	)		const

overridevirtual

N is the order of derivation. Raised if the continuity of the curve is not CN. Raised if N < 1. geometric transformations.

Implements Geom_Curve.

◆ DumpJson()

virtual void Geom_TrimmedCurve::DumpJson	(	Standard_OStream &	theOStream,
		Standard_Integer	theDepth = `-1`
	)		const

overridevirtual

Dumps the content of me into the stream.

Reimplemented from Geom_BoundedCurve.

◆ EndPoint()

gp_Pnt Geom_TrimmedCurve::EndPoint ( ) const

overridevirtual

Returns the end point of <me>. This point is the evaluation of the curve for the "LastParameter".

Implements Geom_BoundedCurve.

◆ FirstParameter()

Standard_Real Geom_TrimmedCurve::FirstParameter ( ) const

overridevirtual

Returns the value of the first parameter of <me>. The first parameter is the parameter of the "StartPoint" of the trimmed curve.

Implements Geom_Curve.

◆ IsClosed()

Standard_Boolean Geom_TrimmedCurve::IsClosed ( ) const

overridevirtual

Returns True if the distance between the StartPoint and the EndPoint is lower or equal to Resolution from package gp.

Implements Geom_Curve.

◆ IsCN()

Standard_Boolean Geom_TrimmedCurve::IsCN ( const Standard_Integer N ) const

overridevirtual

Returns true if the degree of continuity of the basis curve of this trimmed curve is at least N. A trimmed curve is at least "C0" continuous. Warnings : The continuity of the trimmed curve can be greater than the continuity of the basis curve because you consider only a part of the basis curve. Raised if N < 0.

Implements Geom_Curve.

◆ IsPeriodic()

Standard_Boolean Geom_TrimmedCurve::IsPeriodic ( ) const

overridevirtual

Always returns FALSE (independently of the type of basis curve).

Implements Geom_Curve.

◆ LastParameter()

Standard_Real Geom_TrimmedCurve::LastParameter ( ) const

overridevirtual

Returns the value of the last parameter of <me>. The last parameter is the parameter of the "EndPoint" of the trimmed curve.

Implements Geom_Curve.

◆ ParametricTransformation()

virtual Standard_Real Geom_TrimmedCurve::ParametricTransformation ( const gp_Trsf & T ) const

overridevirtual

Returns a coefficient to compute the parameter on the transformed curve for the transform of the point on <me>.

Transformed(T)->Value(U * ParametricTransformation(T))

is the same point as

Value(U).Transformed(T)

This methods calls the basis curve method.

Reimplemented from Geom_Curve.

◆ Period()

virtual Standard_Real Geom_TrimmedCurve::Period ( ) const

overridevirtual

Returns the period of the basis curve of this trimmed curve. Exceptions Standard_NoSuchObject if the basis curve is not periodic.

Reimplemented from Geom_Curve.

◆ Reverse()

void Geom_TrimmedCurve::Reverse ( )

overridevirtual

Changes the orientation of this trimmed curve. As a result:

the basis curve is reversed,
the start point of the initial curve becomes the end point of the reversed curve,
the end point of the initial curve becomes the start point of the reversed curve,
the first and last parameters are recomputed. If the trimmed curve was defined by:
a basis curve whose parameter range is [ 0., 1. ],
the two trim values U1 (first parameter) and U2 (last parameter), the reversed trimmed curve is defined by:
the reversed basis curve, whose parameter range is still [ 0., 1. ],
the two trim values 1. - U2 (first parameter) and 1. - U1 (last parameter).

Implements Geom_Curve.

◆ ReversedParameter()

Standard_Real Geom_TrimmedCurve::ReversedParameter ( const Standard_Real U ) const

overridevirtual

Computes the parameter on the reversed curve for the point of parameter U on this trimmed curve.

Implements Geom_Curve.

◆ SetTrim()

void Geom_TrimmedCurve::SetTrim	(	const Standard_Real	U1,
		const Standard_Real	U2,
		const Standard_Boolean	Sense = `Standard_True`,
		const Standard_Boolean	theAdjustPeriodic = `Standard_True`
	)

Changes this trimmed curve, by redefining the parameter values U1 and U2 which limit its basis curve. Note: If the basis curve is periodic, the trimmed curve has the same orientation as the basis curve if Sense is true (default value) or the opposite orientation if Sense is false. Warning If the basis curve is periodic and theAdjustPeriodic is True, the bounds of the trimmed curve may be different from U1 and U2 if the parametric origin of the basis curve is within the arc of the trimmed curve. In this case, the modified parameter will be equal to U1 or U2 plus or minus the period. When theAdjustPeriodic is False, parameters U1 and U2 will be the same, without adjustment into the first period. Exceptions Standard_ConstructionError if:

the basis curve is not periodic, and either U1 or U2 are outside the bounds of the basis curve, or
U1 is equal to U2.

◆ StartPoint()

gp_Pnt Geom_TrimmedCurve::StartPoint ( ) const

overridevirtual

Returns the start point of <me>. This point is the evaluation of the curve from the "FirstParameter". value and derivatives Warnings : The returned derivatives have the same orientation as the derivatives of the basis curve even if the trimmed curve has not the same orientation as the basis curve.

Implements Geom_BoundedCurve.

◆ Transform()

void Geom_TrimmedCurve::Transform ( const gp_Trsf & T )

overridevirtual

Applies the transformation T to this trimmed curve. Warning The basis curve is also modified.

Implements Geom_Geometry.

◆ TransformedParameter()

virtual Standard_Real Geom_TrimmedCurve::TransformedParameter	(	const Standard_Real	U,
		const gp_Trsf &	T
	)		const

overridevirtual

Returns the parameter on the transformed curve for the transform of the point of parameter U on <me>.

me->Transformed(T)->Value(me->TransformedParameter(U,T))

is the same point as

me->Value(U).Transformed(T)

This methods calls the basis curve method.

Reimplemented from Geom_Curve.

The documentation for this class was generated from the following file:

Geom_TrimmedCurve.hxx

Public Member Functions

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ Geom_TrimmedCurve()

Member Function Documentation

◆ BasisCurve()

◆ Continuity()

◆ Copy()

◆ D0()

◆ D1()

◆ D2()

◆ D3()

◆ DN()

◆ DumpJson()

◆ EndPoint()

◆ FirstParameter()

◆ IsClosed()

◆ IsCN()

◆ IsPeriodic()

◆ LastParameter()

◆ ParametricTransformation()

◆ Period()

◆ Reverse()

◆ ReversedParameter()

◆ SetTrim()

◆ StartPoint()

◆ Transform()

◆ TransformedParameter()