Basic tool for working with AP209 model. More...

#include <StepAP209_Construct.hxx>

Inheritance diagram for StepAP209_Construct:

Public Member Functions
	StepAP209_Construct ()
	Creates an empty tool.

	StepAP209_Construct (const Handle< XSControl_WorkSession > &WS)
	Creates a tool and initializes it.

Standard_Boolean	Init (const Handle< XSControl_WorkSession > &WS)
	Initializes tool; returns True if succeeded.

Standard_Boolean	IsDesing (const Handle< StepBasic_ProductDefinitionFormation > &PD) const

Standard_Boolean	IsAnalys (const Handle< StepBasic_ProductDefinitionFormation > &PD) const

Handle< StepFEA_FeaModel >	FeaModel (const Handle< StepBasic_Product > &Prod) const

Handle< StepFEA_FeaModel >	FeaModel (const Handle< StepBasic_ProductDefinitionFormation > &PDF) const

Handle< StepFEA_FeaAxis2Placement3d >	GetFeaAxis2Placement3d (const Handle< StepFEA_FeaModel > &theFeaModel) const

Handle< StepShape_ShapeRepresentation >	IdealShape (const Handle< StepBasic_Product > &Prod) const

Handle< StepShape_ShapeRepresentation >	IdealShape (const Handle< StepBasic_ProductDefinitionFormation > &PDF) const

Handle< StepShape_ShapeRepresentation >	NominShape (const Handle< StepBasic_Product > &Prod) const

Handle< StepShape_ShapeRepresentation >	NominShape (const Handle< StepBasic_ProductDefinitionFormation > &PDF) const

Handle< StepElement_HSequenceOfElementMaterial >	GetElementMaterial () const

Handle< StepFEA_HSequenceOfElementGeometricRelationship >	GetElemGeomRelat () const

Handle< StepFEA_HSequenceOfElementRepresentation >	GetElements1D (const Handle< StepFEA_FeaModel > &theFeaModel) const

Handle< StepFEA_HSequenceOfElementRepresentation >	GetElements2D (const Handle< StepFEA_FeaModel > &theFEAModel) const

Handle< StepFEA_HSequenceOfElementRepresentation >	GetElements3D (const Handle< StepFEA_FeaModel > &theFEAModel) const

Handle< StepElement_HSequenceOfCurveElementSectionDefinition >	GetCurElemSection (const Handle< StepFEA_Curve3dElementRepresentation > &ElemRepr) const
	Getting list of curve_element_section_definitions for given element_representation.

Handle< StepShape_ShapeRepresentation >	GetShReprForElem (const Handle< StepFEA_ElementRepresentation > &ElemRepr) const

Standard_Boolean	CreateAnalysStructure (const Handle< StepBasic_Product > &Prod) const
	Create empty structure for idealized_analysis_shape.

Standard_Boolean	CreateFeaStructure (const Handle< StepBasic_Product > &Prod) const
	Create fea structure.

Standard_Boolean	ReplaceCcDesingToApplied () const
	Put into model entities Applied... for AP209 instead of entities CcDesing... from AP203.

Standard_Boolean	CreateAddingEntities (const Handle< StepBasic_ProductDefinition > &AnaPD) const
	Create approval.. , date.. , time.. , person.. and organization.. entities for analysis structure.

Handle< StepData_StepModel >	CreateAP203Structure () const
	Create AP203 structure from existing AP209 structure.

Standard_Boolean	CreateAdding203Entities (const Handle< StepBasic_ProductDefinition > &PD, Handle< StepData_StepModel > &aModel) const
	Create approval.. , date.. , time.. , person.. and organization.. entities for 203 structure.

Handle< StepFEA_FeaModel >	FeaModel (const Handle< StepRepr_ProductDefinitionShape > &PDS) const

Handle< StepFEA_FeaModel >	FeaModel (const Handle< StepBasic_ProductDefinition > &PD) const

Handle< StepShape_ShapeRepresentation >	IdealShape (const Handle< StepBasic_ProductDefinition > &PD) const

Handle< StepShape_ShapeRepresentation >	IdealShape (const Handle< StepRepr_ProductDefinitionShape > &PDS) const

Public Member Functions inherited from STEPConstruct_Tool
	STEPConstruct_Tool ()
	Creates an empty tool.

	STEPConstruct_Tool (const Handle< XSControl_WorkSession > &WS)
	Creates a tool and loads it with worksession.

const Handle< XSControl_WorkSession > &	WS () const
	Returns currently loaded WorkSession.

Handle< Interface_InterfaceModel >	Model () const
	Returns current model (Null if not loaded)

const Interface_Graph &	Graph (const Standard_Boolean recompute=Standard_False) const
	Returns current graph (recomputing if necessary)

const Handle< Transfer_TransientProcess > &	TransientProcess () const
	Returns TransientProcess (reading; Null if not loaded)

const Handle< Transfer_FinderProcess > &	FinderProcess () const
	Returns FinderProcess (writing; Null if not loaded)

Protected Member Functions
Handle< StepFEA_HSequenceOfElementRepresentation >	GetFeaElements (const Handle< StepFEA_FeaModel > &theFeaModel, const Handle< Standard_Type > &theType) const

Protected Member Functions inherited from STEPConstruct_Tool
Standard_Boolean	SetWS (const Handle< XSControl_WorkSession > &WS)
	Load worksession; returns True if succeeded Returns False if either FinderProcess of TransientProcess cannot be obtained or are Null.

Detailed Description

Basic tool for working with AP209 model.

Constructor & Destructor Documentation

◆ StepAP209_Construct() [1/2]

StepAP209_Construct::StepAP209_Construct ( )

Creates an empty tool.

◆ StepAP209_Construct() [2/2]

StepAP209_Construct::StepAP209_Construct ( const Handle< XSControl_WorkSession > & WS )

Creates a tool and initializes it.

Member Function Documentation

◆ CreateAdding203Entities()

Standard_Boolean StepAP209_Construct::CreateAdding203Entities	(	const Handle< StepBasic_ProductDefinition > &	PD,
		Handle< StepData_StepModel > &	aModel
	)		const

Create approval.. , date.. , time.. , person.. and organization.. entities for 203 structure.

◆ CreateAddingEntities()

Standard_Boolean StepAP209_Construct::CreateAddingEntities ( const Handle< StepBasic_ProductDefinition > & AnaPD ) const

Create approval.. , date.. , time.. , person.. and organization.. entities for analysis structure.

◆ CreateAnalysStructure()

Standard_Boolean StepAP209_Construct::CreateAnalysStructure ( const Handle< StepBasic_Product > & Prod ) const

Create empty structure for idealized_analysis_shape.

◆ CreateAP203Structure()

Handle< StepData_StepModel > StepAP209_Construct::CreateAP203Structure ( ) const

Create AP203 structure from existing AP209 structure.

◆ CreateFeaStructure()

Standard_Boolean StepAP209_Construct::CreateFeaStructure ( const Handle< StepBasic_Product > & Prod ) const

Create fea structure.

◆ FeaModel() [1/4]

Handle< StepFEA_FeaModel > StepAP209_Construct::FeaModel ( const Handle< StepBasic_Product > & Prod ) const

◆ FeaModel() [2/4]

Handle< StepFEA_FeaModel > StepAP209_Construct::FeaModel ( const Handle< StepBasic_ProductDefinition > & PD ) const

◆ FeaModel() [3/4]

Handle< StepFEA_FeaModel > StepAP209_Construct::FeaModel ( const Handle< StepBasic_ProductDefinitionFormation > & PDF ) const

◆ FeaModel() [4/4]

Handle< StepFEA_FeaModel > StepAP209_Construct::FeaModel ( const Handle< StepRepr_ProductDefinitionShape > & PDS ) const

◆ GetCurElemSection()

Handle< StepElement_HSequenceOfCurveElementSectionDefinition > StepAP209_Construct::GetCurElemSection ( const Handle< StepFEA_Curve3dElementRepresentation > & ElemRepr ) const

Getting list of curve_element_section_definitions for given element_representation.

◆ GetElementMaterial()

Handle< StepElement_HSequenceOfElementMaterial > StepAP209_Construct::GetElementMaterial ( ) const

◆ GetElements1D()

Handle< StepFEA_HSequenceOfElementRepresentation > StepAP209_Construct::GetElements1D ( const Handle< StepFEA_FeaModel > & theFeaModel ) const

◆ GetElements2D()

Handle< StepFEA_HSequenceOfElementRepresentation > StepAP209_Construct::GetElements2D ( const Handle< StepFEA_FeaModel > & theFEAModel ) const

◆ GetElements3D()

Handle< StepFEA_HSequenceOfElementRepresentation > StepAP209_Construct::GetElements3D ( const Handle< StepFEA_FeaModel > & theFEAModel ) const

◆ GetElemGeomRelat()

Handle< StepFEA_HSequenceOfElementGeometricRelationship > StepAP209_Construct::GetElemGeomRelat ( ) const

◆ GetFeaAxis2Placement3d()

Handle< StepFEA_FeaAxis2Placement3d > StepAP209_Construct::GetFeaAxis2Placement3d ( const Handle< StepFEA_FeaModel > & theFeaModel ) const

◆ GetFeaElements()

Handle< StepFEA_HSequenceOfElementRepresentation > StepAP209_Construct::GetFeaElements	(	const Handle< StepFEA_FeaModel > &	theFeaModel,
		const Handle< Standard_Type > &	theType
	)		const

protected

◆ GetShReprForElem()

Handle< StepShape_ShapeRepresentation > StepAP209_Construct::GetShReprForElem ( const Handle< StepFEA_ElementRepresentation > & ElemRepr ) const

◆ IdealShape() [1/4]

Handle< StepShape_ShapeRepresentation > StepAP209_Construct::IdealShape ( const Handle< StepBasic_Product > & Prod ) const

◆ IdealShape() [2/4]

Handle< StepShape_ShapeRepresentation > StepAP209_Construct::IdealShape ( const Handle< StepBasic_ProductDefinition > & PD ) const

◆ IdealShape() [3/4]

Handle< StepShape_ShapeRepresentation > StepAP209_Construct::IdealShape ( const Handle< StepBasic_ProductDefinitionFormation > & PDF ) const

◆ IdealShape() [4/4]

Handle< StepShape_ShapeRepresentation > StepAP209_Construct::IdealShape ( const Handle< StepRepr_ProductDefinitionShape > & PDS ) const

◆ Init()

Standard_Boolean StepAP209_Construct::Init ( const Handle< XSControl_WorkSession > & WS )

Initializes tool; returns True if succeeded.

◆ IsAnalys()

Standard_Boolean StepAP209_Construct::IsAnalys ( const Handle< StepBasic_ProductDefinitionFormation > & PD ) const

◆ IsDesing()

Standard_Boolean StepAP209_Construct::IsDesing ( const Handle< StepBasic_ProductDefinitionFormation > & PD ) const

◆ NominShape() [1/2]

Handle< StepShape_ShapeRepresentation > StepAP209_Construct::NominShape ( const Handle< StepBasic_Product > & Prod ) const

◆ NominShape() [2/2]

Handle< StepShape_ShapeRepresentation > StepAP209_Construct::NominShape ( const Handle< StepBasic_ProductDefinitionFormation > & PDF ) const

◆ ReplaceCcDesingToApplied()

Standard_Boolean StepAP209_Construct::ReplaceCcDesingToApplied ( ) const

Put into model entities Applied... for AP209 instead of entities CcDesing... from AP203.

The documentation for this class was generated from the following file:

StepAP209_Construct.hxx

Public Member Functions

Protected Member Functions