SelectType is the basis used for SELECT_TYPE definitions from the EXPRESS form. A SELECT_TYPE in EXPRESS is an enumeration of Types, it corresponds in a way to a Super-Type, but with no specific Methods, and no exclusivity (a given Type can be member of several SELECT_TYPES, plus be itself a SUB_TYPE).
More...
#include <StepData_SelectType.hxx>
Inherited by StepAP203_ApprovedItem, StepAP203_CertifiedItem, StepAP203_ChangeRequestItem, StepAP203_ClassifiedItem, StepAP203_ContractedItem, StepAP203_DateTimeItem, StepAP203_PersonOrganizationItem, StepAP203_SpecifiedItem, StepAP203_StartRequestItem, StepAP203_WorkItem, StepAP214_ApprovalItem, StepAP214_AutoDesignDateAndPersonItem, StepAP214_AutoDesignDateAndTimeItem, StepAP214_AutoDesignDatedItem, StepAP214_AutoDesignGeneralOrgItem, StepAP214_AutoDesignGroupedItem, StepAP214_AutoDesignPresentedItemSelect, StepAP214_AutoDesignReferencingItem, StepAP214_DocumentReferenceItem, StepAP214_ExternalIdentificationItem, StepAP214_GroupItem, StepAP214_PresentedItemSelect, StepAP242_IdAttributeSelect, StepAP242_ItemIdentifiedRepresentationUsageDefinition, StepBasic_DateTimeSelect, StepBasic_PersonOrganizationSelect, StepBasic_ProductDefinitionOrReference, StepBasic_ProductOrFormationOrDefinition, StepBasic_RoleSelect, StepBasic_SizeSelect, StepBasic_SourceItem, StepBasic_Unit, StepDimTol_DatumOrCommonDatum, StepDimTol_DatumReferenceModifier, StepDimTol_DatumSystemOrReference, StepDimTol_GeometricToleranceTarget, StepDimTol_ShapeToleranceSelect, StepDimTol_ToleranceZoneTarget, StepElement_CurveElementFreedom, StepElement_CurveElementPurpose, StepElement_ElementAspect, StepElement_MeasureOrUnspecifiedValue, StepElement_SurfaceElementPurpose, StepElement_VolumeElementPurpose, StepFEA_CurveElementEndCoordinateSystem, StepFEA_DegreeOfFreedom, StepFEA_ElementOrElementGroup, StepFEA_SymmetricTensor22d, StepFEA_SymmetricTensor23d, StepFEA_SymmetricTensor42d, StepFEA_SymmetricTensor43d, StepGeom_Axis2Placement, StepGeom_CurveOnSurface, StepGeom_PcurveOrSurface, StepGeom_SurfaceBoundary, StepGeom_TrimmingSelect, StepGeom_VectorOrDirection, StepKinematics_KinematicTopologyRepresentationSelect, StepKinematics_RigidPlacement, StepKinematics_SpatialRotation, StepKinematics_SphericalPairSelect, StepRepr_CharacterizedDefinition, StepRepr_ConfigurationDesignItem, StepRepr_RepresentationOrRepresentationReference, StepRepr_RepresentedDefinition, StepRepr_ShapeDefinition, StepRepr_Transformation, StepShape_CsgPrimitive, StepShape_DimensionalCharacteristic, StepShape_GeometricSetSelect, StepShape_ReversibleTopologyItem, StepShape_ShapeDimensionRepresentationItem, StepShape_Shell, StepShape_SurfaceModel, StepShape_ToleranceMethodDefinition, StepShape_ValueQualifier, StepVisual_AnnotationPlaneElement, StepVisual_AreaOrView, StepVisual_CameraModelD3MultiClippingInterectionSelect, StepVisual_CameraModelD3MultiClippingUnionSelect, StepVisual_CurveStyleFontSelect, StepVisual_DraughtingCalloutElement, StepVisual_EdgeOrCurve, StepVisual_FaceOrSurface, StepVisual_FillStyleSelect, StepVisual_FontSelect, StepVisual_InvisibilityContext, StepVisual_InvisibleItem, StepVisual_LayeredItem, StepVisual_MarkerSelect, StepVisual_PathOrCompositeCurve, StepVisual_PresentationRepresentationSelect, StepVisual_PresentationSizeAssignmentSelect, StepVisual_PresentationStyleSelect, StepVisual_RenderingPropertiesSelect, StepVisual_StyleContextSelect, StepVisual_StyledItemTarget, StepVisual_SurfaceStyleElementSelect, StepVisual_TessellatedEdgeOrVertex, and StepVisual_TextOrCharacter.
|
| virtual Standard_Integer | CaseNum (const Handle< Standard_Transient > &ent) const =0 |
| | Recognizes the Type of an Entity. Returns a positive Number which identifies the Type in the definition List of the SelectType. Returns Zero if its Type in not in this List.
|
| |
| Standard_Boolean | Matches (const Handle< Standard_Transient > &ent) const |
| | Returns True if the Type of an Entity complies with the definition list of the SelectType. Also checks for a SelectMember Default Implementation looks for CaseNum or CaseMem positive.
|
| |
| void | SetValue (const Handle< Standard_Transient > &ent) |
| | Stores an Entity. This allows to define a specific SelectType class with one read method per member Type, which returns the Value casted with the good Type.
|
| |
| void | Nullify () |
| | Nullifies the Stored Entity.
|
| |
| const Handle< Standard_Transient > & | Value () const |
| | Returns the Stored Entity. Can be used to define specific read methods (see above)
|
| |
| Standard_Boolean | IsNull () const |
| | Returns True if there is no Stored Entity (i.e. it is Null)
|
| |
| Handle< Standard_Type > | Type () const |
| | Returns the Effective (Dynamic) Type of the Stored Entity If it is Null, returns TYPE(Transient)
|
| |
| Standard_Integer | CaseNumber () const |
| | Recognizes the Type of the stored Entity, or zero if it is Null or SelectMember. Calls the first method CaseNum on Value.
|
| |
| virtual Handle< StepData_PDescr > | Description () const |
| | Returns the Description which corresponds to <me> Null if no specific description to give. This description is used to control reading an check validity. Default returns a Null Handle, i.e. undefined description It can suffice if CaseNum and CaseMem give enough control.
|
| |
| virtual Handle< StepData_SelectMember > | NewMember () const |
| | Returns a preferred SelectMember. Default returns a Null By default, a SelectMember can be set according to data type and Name : it is a SelectNamed if Name is defined.
|
| |
| virtual Standard_Integer | CaseMem (const Handle< StepData_SelectMember > &ent) const |
| | Recognize a SelectMember (kind, name). Returns a positive value which identifies the case in the List of immediate cases (distinct from the List of Entity Types). Zero if not recognizes Default returns 0, saying that no immediate value is allowed.
|
| |
| Standard_Integer | CaseMember () const |
| | Returns the Type of the stored SelectMember, or zero if it is Null or Entity. Calls the method CaseMem on Value.
|
| |
| Handle< StepData_SelectMember > | Member () const |
| | Returns Value as a SelectMember. Null if not a SelectMember.
|
| |
| Standard_CString | SelectName () const |
| | Returns the type name of SelectMember. If no SelectMember or with no type name, returns an empty string To change it, pass through the SelectMember itself.
|
| |
| Standard_Integer | Int () const |
| | This internal method gives access to a value implemented by an Integer (to read it)
|
| |
| void | SetInt (const Standard_Integer val) |
| | This internal method gives access to a value implemented by an Integer (to set it) : a SelectMember MUST ALREADY BE THERE !
|
| |
| Standard_Integer | Integer () const |
| | Gets the value as an Integer.
|
| |
| void | SetInteger (const Standard_Integer val, const Standard_CString name="") |
| | Sets a new Integer value, with an optional type name Warning : If a SelectMember is already set, works on it : value and name must then be accepted by this SelectMember.
|
| |
| Standard_Boolean | Boolean () const |
| |
| void | SetBoolean (const Standard_Boolean val, const Standard_CString name="") |
| |
| StepData_Logical | Logical () const |
| |
| void | SetLogical (const StepData_Logical val, const Standard_CString name="") |
| |
| Standard_Real | Real () const |
| |
| void | SetReal (const Standard_Real val, const Standard_CString name="") |
| |
| virtual | ~StepData_SelectType () |
| |
SelectType is the basis used for SELECT_TYPE definitions from the EXPRESS form. A SELECT_TYPE in EXPRESS is an enumeration of Types, it corresponds in a way to a Super-Type, but with no specific Methods, and no exclusivity (a given Type can be member of several SELECT_TYPES, plus be itself a SUB_TYPE).
A SelectType can be field of a Transient Entity or only used to control an input Argument
This class implies to designate each member Type by a Case Number which is a positive Integer value (this allows a faster treatment).
With this class, a specific SelectType can :
- recognize an Entity as complying or not with its definition,
- storing it, with the guarantee that the stored Entity complies with the definition of the SelectType
- and (if judged useful) give the stored Entity under the good Type rather than simply "Transient".
◆ ~StepData_SelectType()
| virtual StepData_SelectType::~StepData_SelectType |
( |
| ) |
|
|
virtual |
◆ Boolean()
◆ CaseMem()
Recognize a SelectMember (kind, name). Returns a positive value which identifies the case in the List of immediate cases (distinct from the List of Entity Types). Zero if not recognizes Default returns 0, saying that no immediate value is allowed.
Reimplemented in StepBasic_SizeSelect, StepElement_CurveElementFreedom, StepElement_CurveElementPurpose, StepElement_ElementAspect, StepElement_MeasureOrUnspecifiedValue, StepElement_SurfaceElementPurpose, StepElement_VolumeElementPurpose, StepFEA_DegreeOfFreedom, StepFEA_SymmetricTensor23d, StepFEA_SymmetricTensor43d, StepGeom_TrimmingSelect, and StepVisual_MarkerSelect.
◆ CaseMember()
Returns the Type of the stored SelectMember, or zero if it is Null or Entity. Calls the method CaseMem on Value.
◆ CaseNum()
Recognizes the Type of an Entity. Returns a positive Number which identifies the Type in the definition List of the SelectType. Returns Zero if its Type in not in this List.
Implemented in StepAP203_ApprovedItem, StepAP203_CertifiedItem, StepAP203_ChangeRequestItem, StepAP203_ClassifiedItem, StepAP203_ContractedItem, StepAP203_DateTimeItem, StepAP203_PersonOrganizationItem, StepAP203_SpecifiedItem, StepAP203_StartRequestItem, StepAP203_WorkItem, StepAP214_ApprovalItem, StepAP214_AutoDesignDateAndPersonItem, StepAP214_AutoDesignDateAndTimeItem, StepAP214_AutoDesignDatedItem, StepAP214_AutoDesignGeneralOrgItem, StepAP214_AutoDesignGroupedItem, StepAP214_AutoDesignPresentedItemSelect, StepAP214_AutoDesignReferencingItem, StepAP214_DocumentReferenceItem, StepAP214_ExternalIdentificationItem, StepAP214_GroupItem, StepAP214_PresentedItemSelect, StepAP214_SecurityClassificationItem, StepAP242_IdAttributeSelect, StepAP242_ItemIdentifiedRepresentationUsageDefinition, StepBasic_DateTimeSelect, StepBasic_PersonOrganizationSelect, StepBasic_ProductDefinitionOrReference, StepBasic_ProductOrFormationOrDefinition, StepBasic_RoleSelect, StepBasic_Unit, StepDimTol_DatumOrCommonDatum, StepDimTol_DatumReferenceModifier, StepDimTol_DatumSystemOrReference, StepDimTol_GeometricToleranceTarget, StepDimTol_ShapeToleranceSelect, StepDimTol_ToleranceZoneTarget, StepFEA_CurveElementEndCoordinateSystem, StepFEA_ElementOrElementGroup, StepFEA_SymmetricTensor22d, StepFEA_SymmetricTensor42d, StepGeom_Axis2Placement, StepGeom_CurveOnSurface, StepGeom_PcurveOrSurface, StepGeom_SurfaceBoundary, StepGeom_VectorOrDirection, StepRepr_CharacterizedDefinition, StepRepr_ConfigurationDesignItem, StepRepr_RepresentedDefinition, StepRepr_ShapeDefinition, StepRepr_Transformation, StepShape_CsgPrimitive, StepShape_DimensionalCharacteristic, StepShape_GeometricSetSelect, StepShape_ReversibleTopologyItem, StepShape_ShapeDimensionRepresentationItem, StepShape_Shell, StepShape_SurfaceModel, StepShape_ToleranceMethodDefinition, StepShape_ValueQualifier, StepVisual_AnnotationPlaneElement, StepVisual_AreaOrView, StepVisual_CameraModelD3MultiClippingInterectionSelect, StepVisual_CameraModelD3MultiClippingUnionSelect, StepVisual_CurveStyleFontSelect, StepVisual_DraughtingCalloutElement, StepVisual_FillStyleSelect, StepVisual_FontSelect, StepVisual_InvisibilityContext, StepVisual_InvisibleItem, StepVisual_LayeredItem, StepVisual_PresentationRepresentationSelect, StepVisual_PresentationSizeAssignmentSelect, StepVisual_PresentationStyleSelect, StepVisual_StyleContextSelect, StepVisual_StyledItemTarget, StepVisual_SurfaceStyleElementSelect, StepVisual_TextOrCharacter, StepAP214_AutoDesignOrganizationItem, StepAP214_DateAndTimeItem, StepAP214_DateItem, StepAP214_OrganizationItem, StepAP214_PersonAndOrganizationItem, StepBasic_SizeSelect, StepBasic_SourceItem, StepElement_CurveElementFreedom, StepElement_CurveElementPurpose, StepElement_ElementAspect, StepElement_MeasureOrUnspecifiedValue, StepElement_SurfaceElementPurpose, StepElement_VolumeElementPurpose, StepFEA_DegreeOfFreedom, StepFEA_SymmetricTensor23d, StepFEA_SymmetricTensor43d, StepGeom_TrimmingSelect, StepKinematics_KinematicTopologyRepresentationSelect, StepKinematics_RigidPlacement, StepKinematics_SpatialRotation, StepKinematics_SphericalPairSelect, StepRepr_RepresentationOrRepresentationReference, StepVisual_EdgeOrCurve, StepVisual_FaceOrSurface, StepVisual_MarkerSelect, StepVisual_PathOrCompositeCurve, StepVisual_RenderingPropertiesSelect, and StepVisual_TessellatedEdgeOrVertex.
◆ CaseNumber()
Recognizes the Type of the stored Entity, or zero if it is Null or SelectMember. Calls the first method CaseNum on Value.
◆ Description()
Returns the Description which corresponds to <me> Null if no specific description to give. This description is used to control reading an check validity. Default returns a Null Handle, i.e. undefined description It can suffice if CaseNum and CaseMem give enough control.
◆ Int()
This internal method gives access to a value implemented by an Integer (to read it)
◆ Integer()
Gets the value as an Integer.
◆ IsNull()
Returns True if there is no Stored Entity (i.e. it is Null)
◆ Logical()
◆ Matches()
Returns True if the Type of an Entity complies with the definition list of the SelectType. Also checks for a SelectMember Default Implementation looks for CaseNum or CaseMem positive.
◆ Member()
Returns Value as a SelectMember. Null if not a SelectMember.
◆ NewMember()
Returns a preferred SelectMember. Default returns a Null By default, a SelectMember can be set according to data type and Name : it is a SelectNamed if Name is defined.
This method allows to define, for a specific SelectType, a specific SelectMember than SelectNamed. For instance for a Real plus a Name, a SelectReal plus a case number is a good solution, lighter than SelectNamed which is very multipurpose
Reimplemented in StepBasic_SizeSelect, StepBasic_SourceItem, StepElement_CurveElementFreedom, StepElement_CurveElementPurpose, StepElement_ElementAspect, StepElement_MeasureOrUnspecifiedValue, StepElement_SurfaceElementPurpose, StepElement_VolumeElementPurpose, StepFEA_DegreeOfFreedom, StepFEA_SymmetricTensor23d, StepFEA_SymmetricTensor43d, StepGeom_TrimmingSelect, and StepVisual_MarkerSelect.
◆ Nullify()
| void StepData_SelectType::Nullify |
( |
| ) |
|
Nullifies the Stored Entity.
◆ Real()
◆ SelectName()
Returns the type name of SelectMember. If no SelectMember or with no type name, returns an empty string To change it, pass through the SelectMember itself.
◆ SetBoolean()
◆ SetInt()
This internal method gives access to a value implemented by an Integer (to set it) : a SelectMember MUST ALREADY BE THERE !
◆ SetInteger()
Sets a new Integer value, with an optional type name Warning : If a SelectMember is already set, works on it : value and name must then be accepted by this SelectMember.
◆ SetLogical()
◆ SetReal()
◆ SetValue()
Stores an Entity. This allows to define a specific SelectType class with one read method per member Type, which returns the Value casted with the good Type.
◆ Type()
Returns the Effective (Dynamic) Type of the Stored Entity If it is Null, returns TYPE(Transient)
◆ Value()
Returns the Stored Entity. Can be used to define specific read methods (see above)
The documentation for this class was generated from the following file:
