Representation of STEP entity GeometricToleranceWithDefinedAreaUnit. More...

#include <StepDimTol_GeometricToleranceWithDefinedAreaUnit.hxx>

Inheritance diagram for StepDimTol_GeometricToleranceWithDefinedAreaUnit:

[legend]

Public Member Functions
	StepDimTol_GeometricToleranceWithDefinedAreaUnit ()
	Empty constructor.

void	Init (const Handle< TCollection_HAsciiString > &theName, const Handle< TCollection_HAsciiString > &theDescription, const Handle< StepBasic_MeasureWithUnit > &theMagnitude, const StepDimTol_GeometricToleranceTarget &theTolerancedShapeAspect, const Handle< StepBasic_LengthMeasureWithUnit > &theUnitSize, const StepDimTol_AreaUnitType theAreaType, const Standard_Boolean theHasSecondUnitSize, const Handle< StepBasic_LengthMeasureWithUnit > &theSecondUnitSize)
	Initialize all fields (own and inherited)

StepDimTol_AreaUnitType	AreaType () const
	Returns field AreaType.

void	SetAreaType (const StepDimTol_AreaUnitType theAreaType)
	Set field AreaType.

Handle< StepBasic_LengthMeasureWithUnit >	SecondUnitSize () const
	Returns field SecondUnitSize.

void	SetSecondUnitSize (const Handle< StepBasic_LengthMeasureWithUnit > &theSecondUnitSize)
	Set field SecondUnitSize.

Standard_Boolean	HasSecondUnitSize () const
	Indicates if SecondUnitSize field exist.

Public Member Functions inherited from StepDimTol_GeometricToleranceWithDefinedUnit
	StepDimTol_GeometricToleranceWithDefinedUnit ()
	Empty constructor.

void	Init (const Handle< TCollection_HAsciiString > &theName, const Handle< TCollection_HAsciiString > &theDescription, const Handle< StepBasic_MeasureWithUnit > &theMagnitude, const Handle< StepRepr_ShapeAspect > &theTolerancedShapeAspect, const Handle< StepBasic_LengthMeasureWithUnit > &theUnitSize)
	Initialize all fields (own and inherited) AP214.

void	Init (const Handle< TCollection_HAsciiString > &theName, const Handle< TCollection_HAsciiString > &theDescription, const Handle< StepBasic_MeasureWithUnit > &theMagnitude, const StepDimTol_GeometricToleranceTarget &theTolerancedShapeAspect, const Handle< StepBasic_LengthMeasureWithUnit > &theUnitSize)
	Initialize all fields (own and inherited) AP242.

Handle< StepBasic_LengthMeasureWithUnit >	UnitSize () const
	Returns field UnitSize.

void	SetUnitSize (const Handle< StepBasic_LengthMeasureWithUnit > &theUnitSize)
	Set field UnitSize.

Public Member Functions inherited from StepDimTol_GeometricTolerance
	StepDimTol_GeometricTolerance ()
	Empty constructor.

void	Init (const Handle< TCollection_HAsciiString > &theName, const Handle< TCollection_HAsciiString > &theDescription, const Handle< StepBasic_MeasureWithUnit > &theMagnitude, const Handle< StepRepr_ShapeAspect > &theTolerancedShapeAspect)
	Initialize all fields (own and inherited) AP214.

void	Init (const Handle< TCollection_HAsciiString > &theName, const Handle< TCollection_HAsciiString > &theDescription, const Handle< StepBasic_MeasureWithUnit > &theMagnitude, const StepDimTol_GeometricToleranceTarget &theTolerancedShapeAspect)
	Initialize all fields (own and inherited) AP242.

Handle< TCollection_HAsciiString >	Name () const
	Returns field Name.

void	SetName (const Handle< TCollection_HAsciiString > &theName)
	Set field Name.

Handle< TCollection_HAsciiString >	Description () const
	Returns field Description.

void	SetDescription (const Handle< TCollection_HAsciiString > &theDescription)
	Set field Description.

Handle< StepBasic_MeasureWithUnit >	Magnitude () const
	Returns field Magnitude.

void	SetMagnitude (const Handle< StepBasic_MeasureWithUnit > &theMagnitude)
	Set field Magnitude.

StepDimTol_GeometricToleranceTarget	TolerancedShapeAspect () const
	Returns field TolerancedShapeAspect Note: in AP214(203) type of this attribute can be only StepRepr_ShapeAspect.

void	SetTolerancedShapeAspect (const Handle< StepRepr_ShapeAspect > &theTolerancedShapeAspect)
	Set field TolerancedShapeAspect AP214.

void	SetTolerancedShapeAspect (const StepDimTol_GeometricToleranceTarget &theTolerancedShapeAspect)
	Set field TolerancedShapeAspect AP242.

Public Member Functions inherited from Standard_Transient
	Standard_Transient ()
	Empty constructor.

	Standard_Transient (const Standard_Transient &)
	Copy constructor – does nothing.

Standard_Transient &	operator= (const Standard_Transient &)
	Assignment operator, needed to avoid copying reference counter.

virtual	~Standard_Transient ()
	Destructor must be virtual.

virtual const opencascade::handle< Standard_Type > &	DynamicType () const
	Returns a type descriptor about this object.

Standard_Boolean	IsInstance (const opencascade::handle< Standard_Type > &theType) const
	Returns a true value if this is an instance of Type.

Standard_Boolean	IsInstance (const Standard_CString theTypeName) const
	Returns a true value if this is an instance of TypeName.

Standard_Boolean	IsKind (const opencascade::handle< Standard_Type > &theType) const
	Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism.

Standard_Boolean	IsKind (const Standard_CString theTypeName) const
	Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism.

Standard_Transient *	This () const
	Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero.

Standard_Integer	GetRefCount () const noexcept
	Get the reference counter of this object.

void	IncrementRefCounter () noexcept
	Increments the reference counter of this object.

Standard_Integer	DecrementRefCounter () noexcept
	Decrements the reference counter of this object; returns the decremented value.

virtual void	Delete () const
	Memory deallocator for transient classes.

Additional Inherited Members
Public Types inherited from Standard_Transient
typedef void	base_type
	Returns a type descriptor about this object.

Static Public Member Functions inherited from Standard_Transient
static constexpr const char *	get_type_name ()
	Returns a type descriptor about this object.

static const opencascade::handle< Standard_Type > &	get_type_descriptor ()
	Returns type descriptor of Standard_Transient class.

Detailed Description

Representation of STEP entity GeometricToleranceWithDefinedAreaUnit.

Constructor & Destructor Documentation

◆ StepDimTol_GeometricToleranceWithDefinedAreaUnit()

StepDimTol_GeometricToleranceWithDefinedAreaUnit::StepDimTol_GeometricToleranceWithDefinedAreaUnit ( )

Empty constructor.

Member Function Documentation

◆ AreaType()

StepDimTol_AreaUnitType StepDimTol_GeometricToleranceWithDefinedAreaUnit::AreaType ( ) const

inline

Returns field AreaType.

◆ HasSecondUnitSize()

Standard_Boolean StepDimTol_GeometricToleranceWithDefinedAreaUnit::HasSecondUnitSize ( ) const

inline

Indicates if SecondUnitSize field exist.

◆ Init()

void StepDimTol_GeometricToleranceWithDefinedAreaUnit::Init	(	const Handle< TCollection_HAsciiString > &	theName,
		const Handle< TCollection_HAsciiString > &	theDescription,
		const Handle< StepBasic_MeasureWithUnit > &	theMagnitude,
		const StepDimTol_GeometricToleranceTarget &	theTolerancedShapeAspect,
		const Handle< StepBasic_LengthMeasureWithUnit > &	theUnitSize,
		const StepDimTol_AreaUnitType	theAreaType,
		const Standard_Boolean	theHasSecondUnitSize,
		const Handle< StepBasic_LengthMeasureWithUnit > &	theSecondUnitSize
	)

Initialize all fields (own and inherited)

◆ SecondUnitSize()

Handle< StepBasic_LengthMeasureWithUnit > StepDimTol_GeometricToleranceWithDefinedAreaUnit::SecondUnitSize ( ) const

inline

Returns field SecondUnitSize.

◆ SetAreaType()

void StepDimTol_GeometricToleranceWithDefinedAreaUnit::SetAreaType ( const StepDimTol_AreaUnitType theAreaType )

inline

Set field AreaType.

◆ SetSecondUnitSize()

void StepDimTol_GeometricToleranceWithDefinedAreaUnit::SetSecondUnitSize ( const Handle< StepBasic_LengthMeasureWithUnit > & theSecondUnitSize )

inline

Set field SecondUnitSize.

The documentation for this class was generated from the following file:

StepDimTol_GeometricToleranceWithDefinedAreaUnit.hxx

Public Member Functions

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ StepDimTol_GeometricToleranceWithDefinedAreaUnit()

Member Function Documentation

◆ AreaType()

◆ HasSecondUnitSize()

◆ Init()

◆ SecondUnitSize()

◆ SetAreaType()

◆ SetSecondUnitSize()