A Binder is an auxiliary object to Map the Result of the Transfer of a given Object : it records the Result of the Unitary Transfer (Resulting Object), status of progress and error (if any) of the Process. More...
#include <Transfer_Binder.hxx>
Public Member Functions | |
| void | Merge (const Handle< Transfer_Binder > &other) |
| Merges basic data (Check, ExecStatus) from another Binder but keeps its result. Used when a binder is replaced by another one, this allows to keep messages. | |
| virtual Standard_Boolean | IsMultiple () const |
| Returns True if a Binder has several results, either by itself or because it has next results Can be defined by sub-classes. | |
| virtual Handle< Standard_Type > | ResultType () const =0 |
| Returns the Type which characterizes the Result (if known) | |
| virtual Standard_CString | ResultTypeName () const =0 |
| Returns the Name of the Type which characterizes the Result Can be returned even if ResultType itself is unknown. | |
| void | AddResult (const Handle< Transfer_Binder > &next) |
| Adds a next result (at the end of the list) Remark : this information is not processed by Merge. | |
| Handle< Transfer_Binder > | NextResult () const |
| Returns the next result, Null if none. | |
| Standard_Boolean | HasResult () const |
| Returns True if a Result is available (StatusResult = Defined) A Unique Result will be gotten by Result (which must be defined in each sub-class according to result type) For a Multiple Result, see class MultipleBinder For other case, specific access has to be forecast. | |
| void | SetAlreadyUsed () |
| Declares that result is now used by another one, it means that it cannot be modified (by Rebind) | |
| Transfer_StatusResult | Status () const |
| Returns status, which can be Initial (not yet done), Made (a result is recorded, not yet shared), Used (it is shared and cannot be modified) | |
| Transfer_StatusExec | StatusExec () const |
| Returns execution status. | |
| void | SetStatusExec (const Transfer_StatusExec stat) |
| Modifies execution status; called by TransferProcess only (for StatusError, rather use SetError, below) | |
| void | AddFail (const Standard_CString mess, const Standard_CString orig="") |
| Used to declare an individual transfer as being erroneous (Status is set to Void, StatusExec is set to Error, <errmess> is added to Check's list of Fails) It is possible to record several messages of error. | |
| void | AddWarning (const Standard_CString mess, const Standard_CString orig="") |
| Used to attach a Warning Message to an individual Transfer It has no effect on the Status. | |
| const Handle< Interface_Check > | Check () const |
| Returns Check which stores Fail messages Note that no Entity is associated in this Check. | |
| Handle< Interface_Check > | CCheck () |
| Returns Check which stores Fail messages, in order to modify it (adding messages, or replacing it) | |
| ~Transfer_Binder () | |
| Destructor. | |
 Public Member Functions inherited from Standard_Transient | |
| Standard_Transient () | |
| Empty constructor. | |
| Standard_Transient (const Standard_Transient &) | |
| Copy constructor – does nothing. | |
| Standard_Transient & | operator= (const Standard_Transient &) |
| Assignment operator, needed to avoid copying reference counter. | |
| virtual | ~Standard_Transient () |
| Destructor must be virtual. | |
| virtual const opencascade::handle< Standard_Type > & | DynamicType () const |
| Returns a type descriptor about this object. | |
| Standard_Boolean | IsInstance (const opencascade::handle< Standard_Type > &theType) const |
| Returns a true value if this is an instance of Type. | |
| Standard_Boolean | IsInstance (const Standard_CString theTypeName) const |
| Returns a true value if this is an instance of TypeName. | |
| Standard_Boolean | IsKind (const opencascade::handle< Standard_Type > &theType) const |
| Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. | |
| Standard_Boolean | IsKind (const Standard_CString theTypeName) const |
| Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. | |
| Standard_Transient * | This () const |
| Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero. | |
| Standard_Integer | GetRefCount () const noexcept |
| Get the reference counter of this object. | |
| void | IncrementRefCounter () noexcept |
| Increments the reference counter of this object. | |
| Standard_Integer | DecrementRefCounter () noexcept |
| Decrements the reference counter of this object; returns the decremented value. | |
| virtual void | Delete () const |
| Memory deallocator for transient classes. | |
Protected Member Functions | |
| Transfer_Binder () | |
| Sets fields at initial values. | |
| void | SetResultPresent () |
| Used to declare that a result is recorded for an individual transfer (works by setting StatusResult to Defined) | |
Additional Inherited Members | |
| Public Types inherited from Standard_Transient | |
| typedef void | base_type |
| Returns a type descriptor about this object. | |
| Static Public Member Functions inherited from Standard_Transient | |
| static constexpr const char * | get_type_name () |
| Returns a type descriptor about this object. | |
| static const opencascade::handle< Standard_Type > & | get_type_descriptor () |
| Returns type descriptor of Standard_Transient class. | |
Detailed Description
A Binder is an auxiliary object to Map the Result of the Transfer of a given Object : it records the Result of the Unitary Transfer (Resulting Object), status of progress and error (if any) of the Process.
The class Binder itself makes no definition for the Result : it is defined by sub-classes : it can be either Simple (and has to be typed : see generic class SimpleBinder) or Multiple (see class MultipleBinder).
In principle, for a Transfer in progress, Result cannot be accessed : this would cause an exception raising. This is controlled by the value if StatusResult : if it is "Used", the Result cannot be changed. This status is normally controlled by TransferProcess but can be directly (see method SetAlreadyUsed)
Checks can be completed by a record of cases, as string which can be used as codes, but not to be printed
In addition to the Result, a Binder can bring a list of Attributes, which are additional data, each of them has a name
Constructor & Destructor Documentation
◆ ~Transfer_Binder()
| Transfer_Binder::~Transfer_Binder | ( | ) |
Destructor.
◆ Transfer_Binder()
|
protected |
Sets fields at initial values.
Member Function Documentation
◆ AddFail()
| void Transfer_Binder::AddFail | ( | const Standard_CString | mess, |
| const Standard_CString | orig = "" |
||
| ) |
Used to declare an individual transfer as being erroneous (Status is set to Void, StatusExec is set to Error, <errmess> is added to Check's list of Fails) It is possible to record several messages of error.
It has same effect for TransferProcess as raising an exception during the operation of Transfer, except the Transfer tries to continue (as if ErrorHandle had been set)
◆ AddResult()
| void Transfer_Binder::AddResult | ( | const Handle< Transfer_Binder > & | next | ) |
Adds a next result (at the end of the list) Remark : this information is not processed by Merge.
◆ AddWarning()
| void Transfer_Binder::AddWarning | ( | const Standard_CString | mess, |
| const Standard_CString | orig = "" |
||
| ) |
Used to attach a Warning Message to an individual Transfer It has no effect on the Status.
◆ CCheck()
| Handle< Interface_Check > Transfer_Binder::CCheck | ( | ) |
Returns Check which stores Fail messages, in order to modify it (adding messages, or replacing it)
◆ Check()
| const Handle< Interface_Check > Transfer_Binder::Check | ( | ) | const |
Returns Check which stores Fail messages Note that no Entity is associated in this Check.
◆ HasResult()
| Standard_Boolean Transfer_Binder::HasResult | ( | ) | const |
Returns True if a Result is available (StatusResult = Defined) A Unique Result will be gotten by Result (which must be defined in each sub-class according to result type) For a Multiple Result, see class MultipleBinder For other case, specific access has to be forecast.
◆ IsMultiple()
|
virtual |
Returns True if a Binder has several results, either by itself or because it has next results Can be defined by sub-classes.
Reimplemented in Transfer_MultipleBinder, Transfer_TransientListBinder, and TransferBRep_ShapeListBinder.
◆ Merge()
| void Transfer_Binder::Merge | ( | const Handle< Transfer_Binder > & | other | ) |
Merges basic data (Check, ExecStatus) from another Binder but keeps its result. Used when a binder is replaced by another one, this allows to keep messages.
◆ NextResult()
| Handle< Transfer_Binder > Transfer_Binder::NextResult | ( | ) | const |
Returns the next result, Null if none.
◆ ResultType()
|
pure virtual |
Returns the Type which characterizes the Result (if known)
Implemented in Transfer_MultipleBinder, Transfer_SimpleBinderOfTransient, Transfer_TransientListBinder, Transfer_VoidBinder, TransferBRep_BinderOfShape, and TransferBRep_ShapeListBinder.
◆ ResultTypeName()
|
pure virtual |
Returns the Name of the Type which characterizes the Result Can be returned even if ResultType itself is unknown.
Implemented in Transfer_MultipleBinder, Transfer_SimpleBinderOfTransient, Transfer_TransientListBinder, Transfer_VoidBinder, TransferBRep_BinderOfShape, and TransferBRep_ShapeListBinder.
◆ SetAlreadyUsed()
| void Transfer_Binder::SetAlreadyUsed | ( | ) |
Declares that result is now used by another one, it means that it cannot be modified (by Rebind)
◆ SetResultPresent()
|
protected |
Used to declare that a result is recorded for an individual transfer (works by setting StatusResult to Defined)
This Method is to be called once a Result is really recorded (see sub-classes of Binder, especially SimpleBinder) : it is senseless if called isolately
◆ SetStatusExec()
| void Transfer_Binder::SetStatusExec | ( | const Transfer_StatusExec | stat | ) |
Modifies execution status; called by TransferProcess only (for StatusError, rather use SetError, below)
◆ Status()
| Transfer_StatusResult Transfer_Binder::Status | ( | ) | const |
Returns status, which can be Initial (not yet done), Made (a result is recorded, not yet shared), Used (it is shared and cannot be modified)
◆ StatusExec()
| Transfer_StatusExec Transfer_Binder::StatusExec | ( | ) | const |
Returns execution status.
The documentation for this class was generated from the following file:
