#include <Aspect_CircularGrid.hxx>

Inheritance diagram for Aspect_CircularGrid:

[legend]

Public Member Functions
	Aspect_CircularGrid (const double aRadiusStep, const int aDivisionNumber, const double XOrigin=0, const double anYOrigin=0, const double aRotationAngle=0)
	creates a new grid. By default this grid is not active.

void	SetRadiusStep (const double aStep)
	defines the x step of the grid.

void	SetDivisionNumber (const int aNumber)
	defines the step of the grid.

void	SetGridValues (const double XOrigin, const double YOrigin, const double RadiusStep, const int DivisionNumber, const double RotationAngle)

void	Compute (const double X, const double Y, double &gridX, double &gridY) const override
	returns the point of the grid the closest to the point X,Y

double	RadiusStep () const
	returns the x step of the grid.

int	DivisionNumber () const
	returns the x step of the grid.

void	SetRadius (const double theRadius)
	Set the circular grid radius (plane-local units). 0.0 (default) means unbounded - the shader draws the grid to the horizon.

double	Radius () const
	Return the bounded radius. 0.0 means unbounded.

void	SetZOffset (const double theOffset)
	Set signed offset along the plane normal for display only; snap math stays on the plane. Use a small negative value to avoid z-fighting with coplanar geometry.

double	ZOffset () const
	Return the display-time Z-offset along the plane normal.

void	SetArcRange (const double theStart, const double theEnd)
	Restrict the grid to an angular wedge, walking counter-clockwise from `theStart` to `theEnd` (radians, measured from the rotated plane X axis). Setting both values equal (e.g. both 0.0) returns to full-circle rendering - the sentinel used for unbounded.

double	AngleStart () const
	Return the arc start angle (radians). Meaningful only when IsArc() is true.

double	AngleEnd () const
	Return the arc end angle (radians). Meaningful only when IsArc() is true.

bool	IsArc () const
	Return TRUE when the grid is restricted to an angular wedge.

void	Init () override

void	DumpJson (Standard_OStream &theOStream, int theDepth=-1) const override
	Dumps the content of me into the stream.

Public Member Functions inherited from Aspect_Grid
void	SetXOrigin (const double anOrigin)
	defines the x Origin of the grid.

void	SetYOrigin (const double anOrigin)
	defines the y Origin of the grid.

void	SetRotationAngle (const double anAngle)
	defines the orientation of the grid.

void	Rotate (const double anAngle)
	Rotate the grid from a relative angle.

void	Translate (const double aDx, const double aDy)
	Translate the grid from a relative distance.

virtual void	SetColors (const Quantity_Color &aColor, const Quantity_Color &aTenthColor)
	Change the colors of the grid.

void	Hit (const double X, const double Y, double &gridX, double &gridY) const
	returns the point of the grid the closest to the point X,Y if the grid is active. If the grid is not active returns X,Y.

void	Activate ()
	activates the grid. The Hit method will return gridx and gridx computed according to the steps of the grid.

void	Deactivate ()
	deactivates the grid. The hit method will return gridx and gridx as the enter value X & Y.

double	XOrigin () const
	returns the x Origin of the grid.

double	YOrigin () const
	returns the x Origin of the grid.

double	RotationAngle () const
	returns the x Angle of the grid.

bool	IsActive () const
	Returns TRUE when the grid is active.

void	Colors (Quantity_Color &aColor, Quantity_Color &aTenthColor) const
	Returns the colors of the grid.

void	SetDrawMode (const Aspect_GridDrawMode aDrawMode)
	Change the grid aspect.

Aspect_GridDrawMode	DrawMode () const
	Returns the grid aspect.

virtual void	Display ()=0
	Display the grid at screen.

virtual void	Erase () const =0
	Erase the grid from screen.

virtual bool	IsDisplayed () const =0
	Returns TRUE when the grid is displayed at screen.

Public Member Functions inherited from Standard_Transient
	Standard_Transient ()
	Empty constructor.

	Standard_Transient (const Standard_Transient &)
	Copy constructor – does nothing.

Standard_Transient &	operator= (const Standard_Transient &)
	Assignment operator, needed to avoid copying reference counter.

virtual	~Standard_Transient ()=default
	Destructor must be virtual.

virtual const opencascade::handle< Standard_Type > &	DynamicType () const
	Returns a type descriptor about this object.

bool	IsInstance (const opencascade::handle< Standard_Type > &theType) const
	Returns a true value if this is an instance of Type.

bool	IsInstance (const char *const theTypeName) const
	Returns a true value if this is an instance of TypeName.

bool	IsKind (const opencascade::handle< Standard_Type > &theType) const
	Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism.

bool	IsKind (const char *const theTypeName) const
	Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism.

Standard_Transient *	This () const
	Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero.

int	GetRefCount () const noexcept
	Get the reference counter of this object.

void	IncrementRefCounter () noexcept
	Increments the reference counter of this object. Uses relaxed memory ordering since incrementing only requires atomicity, not synchronization with other memory operations.

int	DecrementRefCounter () noexcept
	Decrements the reference counter of this object; returns the decremented value. Uses release ordering for the decrement to ensure all writes to the object are visible before the count reaches zero. An acquire fence is added only when the count reaches zero, ensuring proper synchronization before deletion. This is more efficient than using acq_rel for every decrement.

virtual void	Delete () const
	Memory deallocator for transient classes.

Additional Inherited Members
Public Types inherited from Standard_Transient
typedef void	base_type
	Returns a type descriptor about this object.

Static Public Member Functions inherited from Standard_Transient
static constexpr const char *	get_type_name ()
	Returns a type descriptor about this object.

static const opencascade::handle< Standard_Type > &	get_type_descriptor ()
	Returns type descriptor of Standard_Transient class.

Protected Member Functions inherited from Aspect_Grid
	Aspect_Grid (const double theXOrigin=0.0, const double theYOrigin=0.0, const double theRotationAngle=0, const Quantity_Color &theColor=Quantity_NOC_GRAY50, const Quantity_Color &theTenthColor=Quantity_NOC_GRAY70)
	Creates a new grid. By default this grid is not active.

virtual void	UpdateDisplay ()=0
	Updates the grid parameters.

Protected Attributes inherited from Aspect_Grid
double	myRotationAngle

double	myXOrigin

double	myYOrigin

Quantity_Color	myColor

Quantity_Color	myTenthColor

bool	myIsActive

Aspect_GridDrawMode	myDrawMode

Constructor & Destructor Documentation

◆ Aspect_CircularGrid()

Aspect_CircularGrid::Aspect_CircularGrid	(	const double	aRadiusStep,
		const int	aDivisionNumber,
		const double	XOrigin = 0,
		const double	anYOrigin = 0,
		const double	aRotationAngle = 0 )

creates a new grid. By default this grid is not active.

Member Function Documentation

◆ AngleEnd()

double Aspect_CircularGrid::AngleEnd ( ) const

inline

Return the arc end angle (radians). Meaningful only when IsArc() is true.

◆ AngleStart()

double Aspect_CircularGrid::AngleStart ( ) const

inline

Return the arc start angle (radians). Meaningful only when IsArc() is true.

◆ Compute()

void Aspect_CircularGrid::Compute	(	const double	X,
		const double	Y,
		double &	gridX,
		double &	gridY ) const

overridevirtual

returns the point of the grid the closest to the point X,Y

Implements Aspect_Grid.

◆ DivisionNumber()

int Aspect_CircularGrid::DivisionNumber ( ) const

returns the x step of the grid.

◆ DumpJson()

void Aspect_CircularGrid::DumpJson	(	Standard_OStream &	theOStream,
		int	theDepth = -1 ) const

overridevirtual

Dumps the content of me into the stream.

Reimplemented from Aspect_Grid.

Reimplemented in V3d_CircularGrid.

◆ Init()

void Aspect_CircularGrid::Init ( )

overridevirtual

Implements Aspect_Grid.

◆ IsArc()

bool Aspect_CircularGrid::IsArc ( ) const

inline

Return TRUE when the grid is restricted to an angular wedge.

◆ Radius()

double Aspect_CircularGrid::Radius ( ) const

inline

Return the bounded radius. 0.0 means unbounded.

◆ RadiusStep()

double Aspect_CircularGrid::RadiusStep ( ) const

returns the x step of the grid.

◆ SetArcRange()

void Aspect_CircularGrid::SetArcRange	(	const double	theStart,
		const double	theEnd )

Restrict the grid to an angular wedge, walking counter-clockwise from theStart to theEnd (radians, measured from the rotated plane X axis). Setting both values equal (e.g. both 0.0) returns to full-circle rendering - the sentinel used for unbounded.

◆ SetDivisionNumber()

void Aspect_CircularGrid::SetDivisionNumber ( const int aNumber )

defines the step of the grid.

◆ SetGridValues()

void Aspect_CircularGrid::SetGridValues	(	const double	XOrigin,
		const double	YOrigin,
		const double	RadiusStep,
		const int	DivisionNumber,
		const double	RotationAngle )

◆ SetRadius()

void Aspect_CircularGrid::SetRadius ( const double theRadius )

Set the circular grid radius (plane-local units). 0.0 (default) means unbounded - the shader draws the grid to the horizon.

◆ SetRadiusStep()

void Aspect_CircularGrid::SetRadiusStep ( const double aStep )

defines the x step of the grid.

◆ SetZOffset()

void Aspect_CircularGrid::SetZOffset ( const double theOffset )

Set signed offset along the plane normal for display only; snap math stays on the plane. Use a small negative value to avoid z-fighting with coplanar geometry.

◆ ZOffset()

double Aspect_CircularGrid::ZOffset ( ) const

inline

Return the display-time Z-offset along the plane normal.

The documentation for this class was generated from the following file:

Aspect_CircularGrid.hxx

Public Member Functions

Additional Inherited Members

Constructor & Destructor Documentation

◆ Aspect_CircularGrid()

Member Function Documentation

◆ AngleEnd()

◆ AngleStart()

◆ Compute()

◆ DivisionNumber()

◆ DumpJson()

◆ Init()

◆ IsArc()

◆ Radius()

◆ RadiusStep()

◆ SetArcRange()

◆ SetDivisionNumber()

◆ SetGridValues()

◆ SetRadius()

◆ SetRadiusStep()

◆ SetZOffset()

◆ ZOffset()