This class provides some useful basic tools to build IGESGeom curves, especially : define a curve in a plane in 3D space (ex. Circular or Conic arc, or Copious Data defined in 2D) make a CopiousData from a list of points/vectors. More...

#include <IGESConvGeom_GeomBuilder.hxx>

Public Member Functions
	IGESConvGeom_GeomBuilder ()
	Creates a GeomBuilder at initial state.

void	Clear ()
	Clears list of Points/Vectors and data about Transformation.

void	AddXY (const gp_XY &val)
	Adds a XY (Z=0) to the list of points.

void	AddXYZ (const gp_XYZ &val)
	Adds a XYZ to the list of points.

void	AddVec (const gp_XYZ &val)
	Adds a Vector part to the list of points. It will be used for CopiousData, datatype=3, only. AddXY and AddXYZ consider a null vector part (0,0,0) AddVec adds to the last added XY or XYZ.

int	NbPoints () const
	Returns the count of already recorded points.

gp_XYZ	Point (const int num) const
	Returns a point given its rank (if added as XY, Z will be 0)

occ::handle< IGESGeom_CopiousData >	MakeCopiousData (const int datatype, const bool polyline=false) const
	Makes a CopiousData with the list of recorded Points/Vectors according to <datatype>, which must be 1,2 or 3 If <polyline> is given True, the CopiousData is coded as a Polyline, but <datatype> must not be 3 <datatype> = 1 : Common Z is computed as average of all Z <datatype> = 1 or 2 : Vectors are ignored.

gp_Trsf	Position () const
	Returns the Position in which the method EvalXYZ will evaluate a XYZ. It can be regarded as defining a local system. It is initially set to Identity.

void	SetPosition (const gp_Trsf &pos)
	Sets final position from an already defined Trsf.

void	SetPosition (const gp_Ax3 &pos)
	Sets final position from an Ax3.

void	SetPosition (const gp_Ax2 &pos)
	Sets final position from an Ax2.

void	SetPosition (const gp_Ax1 &pos)
	Sets final position from an Ax1 (this means that origin point and Z-axis are defined, the other axes are defined arbitrarily)

bool	IsIdentity () const
	Returns True if the Position is Identity.

bool	IsTranslation () const
	Returns True if the Position is a Translation only Remark : Identity and ZOnly will answer True.

bool	IsZOnly () const
	Returns True if the Position corresponds to a Z-Displacement, i.e. is a Translation only, and only on Z Remark : Identity will answer True.

void	EvalXYZ (const gp_XYZ &val, double &X, double &Y, double &Z) const
	Evaluates a XYZ value in the Position already defined. Returns the transformed coordinates. For a 2D definition, X,Y will then be used to define a XY and Z will be regarded as a Z Displacement (can be ignored)

occ::handle< IGESGeom_TransformationMatrix >	MakeTransformation (const double unit=1) const
	Returns the IGES Transformation which corresponds to the Position. Even if it is an Identity : IsIdentity should be tested first. <unit> is the unit value in which the model is created : it is used to convert translation part.

Detailed Description

This class provides some useful basic tools to build IGESGeom curves, especially : define a curve in a plane in 3D space (ex. Circular or Conic arc, or Copious Data defined in 2D) make a CopiousData from a list of points/vectors.

Constructor & Destructor Documentation

◆ IGESConvGeom_GeomBuilder()

IGESConvGeom_GeomBuilder::IGESConvGeom_GeomBuilder ( )

Creates a GeomBuilder at initial state.

Member Function Documentation

◆ AddVec()

void IGESConvGeom_GeomBuilder::AddVec ( const gp_XYZ & val )

Adds a Vector part to the list of points. It will be used for CopiousData, datatype=3, only. AddXY and AddXYZ consider a null vector part (0,0,0) AddVec adds to the last added XY or XYZ.

◆ AddXY()

void IGESConvGeom_GeomBuilder::AddXY ( const gp_XY & val )

Adds a XY (Z=0) to the list of points.

◆ AddXYZ()

void IGESConvGeom_GeomBuilder::AddXYZ ( const gp_XYZ & val )

Adds a XYZ to the list of points.

◆ Clear()

void IGESConvGeom_GeomBuilder::Clear ( )

Clears list of Points/Vectors and data about Transformation.

◆ EvalXYZ()

void IGESConvGeom_GeomBuilder::EvalXYZ	(	const gp_XYZ &	val,
		double &	X,
		double &	Y,
		double &	Z ) const

Evaluates a XYZ value in the Position already defined. Returns the transformed coordinates. For a 2D definition, X,Y will then be used to define a XY and Z will be regarded as a Z Displacement (can be ignored)

◆ IsIdentity()

bool IGESConvGeom_GeomBuilder::IsIdentity ( ) const

Returns True if the Position is Identity.

◆ IsTranslation()

bool IGESConvGeom_GeomBuilder::IsTranslation ( ) const

Returns True if the Position is a Translation only Remark : Identity and ZOnly will answer True.

◆ IsZOnly()

bool IGESConvGeom_GeomBuilder::IsZOnly ( ) const

Returns True if the Position corresponds to a Z-Displacement, i.e. is a Translation only, and only on Z Remark : Identity will answer True.

◆ MakeCopiousData()

occ::handle< IGESGeom_CopiousData > IGESConvGeom_GeomBuilder::MakeCopiousData	(	const int	datatype,
		const bool	polyline = false ) const

Makes a CopiousData with the list of recorded Points/Vectors according to <datatype>, which must be 1,2 or 3 If <polyline> is given True, the CopiousData is coded as a Polyline, but <datatype> must not be 3 <datatype> = 1 : Common Z is computed as average of all Z <datatype> = 1 or 2 : Vectors are ignored.

◆ MakeTransformation()

occ::handle< IGESGeom_TransformationMatrix > IGESConvGeom_GeomBuilder::MakeTransformation ( const double unit = 1 ) const

Returns the IGES Transformation which corresponds to the Position. Even if it is an Identity : IsIdentity should be tested first. <unit> is the unit value in which the model is created : it is used to convert translation part.

◆ NbPoints()

int IGESConvGeom_GeomBuilder::NbPoints ( ) const

Returns the count of already recorded points.

◆ Point()

gp_XYZ IGESConvGeom_GeomBuilder::Point ( const int num ) const

Returns a point given its rank (if added as XY, Z will be 0)

◆ Position()

gp_Trsf IGESConvGeom_GeomBuilder::Position ( ) const

Returns the Position in which the method EvalXYZ will evaluate a XYZ. It can be regarded as defining a local system. It is initially set to Identity.

◆ SetPosition() [1/4]

void IGESConvGeom_GeomBuilder::SetPosition ( const gp_Ax1 & pos )

Sets final position from an Ax1 (this means that origin point and Z-axis are defined, the other axes are defined arbitrarily)

◆ SetPosition() [2/4]

void IGESConvGeom_GeomBuilder::SetPosition ( const gp_Ax2 & pos )

Sets final position from an Ax2.

◆ SetPosition() [3/4]

void IGESConvGeom_GeomBuilder::SetPosition ( const gp_Ax3 & pos )

Sets final position from an Ax3.

◆ SetPosition() [4/4]

void IGESConvGeom_GeomBuilder::SetPosition ( const gp_Trsf & pos )

Sets final position from an already defined Trsf.

The documentation for this class was generated from the following file:

IGESConvGeom_GeomBuilder.hxx

Public Member Functions