This class defines services which permit to access Data issued from a File, in a form which does not depend of physical format : thus, each Record has an attached ParamList (to be managed) and resulting Entity. More...

#include <Interface_FileReaderData.hxx>

Inheritance diagram for Interface_FileReaderData:

[legend]

Public Member Functions
virtual int	NbRecords () const
	Returns the count of registered records That is, value given for Initialization (can be redefined)

virtual int	NbEntities () const
	Returns the count of entities. Depending of each norm, records can be Entities or SubParts (SubList in STEP, SubGroup in SET ...). NbEntities counts only Entities, not Subs Used for memory reservation in InterfaceModel Default implementation uses FindNextRecord Can be redefined into a more performant way.

virtual int	FindNextRecord (const int num) const =0
	Determines the record number defining an Entity following a given record number. Specific to each sub-class of FileReaderData. Returning zero means no record found.

void	InitParams (const int num)
	attaches an empty ParamList to a Record

void	AddParam (const int num, const char *const aval, const Interface_ParamType atype, const int nument=0)
	Adds a parameter to record no "num" and fills its fields (EntityNumber is optional) Warning : <aval> is assumed to be memory-managed elsewhere : it is NOT copied. This gives a best speed : strings remain stored in pages of characters.

void	AddParam (const int num, const TCollection_AsciiString &aval, const Interface_ParamType atype, const int nument=0)
	Same as above, but gets a AsciiString from TCollection Remark that the content of the AsciiString is locally copied (because its content is most often lost after using)

void	AddParam (const int num, const Interface_FileParameter &FP)
	Same as above, but gets a complete FileParameter Warning : Content of <FP> is NOT copied : its original address and space in memory are assumed to be managed elsewhere (see ParamSet)

void	SetParam (const int num, const int nump, const Interface_FileParameter &FP)
	Sets a new value for a parameter of a record, given by : num : record number; nump : parameter number in the record.

int	NbParams (const int num) const
	Returns count of parameters attached to record "num" If <num> = 0, returns the total recorded count of parameters.

occ::handle< Interface_ParamList >	Params (const int num) const
	Returns the complete ParamList of a record (read only) num = 0 to return the whole param list for the file.

const Interface_FileParameter &	Param (const int num, const int nump) const
	Returns parameter "nump" of record "num", as a complete FileParameter.

Interface_FileParameter &	ChangeParam (const int num, const int nump)
	Same as above, but in order to be modified on place.

Interface_ParamType	ParamType (const int num, const int nump) const
	Returns type of parameter "nump" of record "num" Returns literal value of parameter "nump" of record "num" was C++ : return const &.

const char *	ParamCValue (const int num, const int nump) const
	Same as above, but as a CString was C++ : return const.

bool	IsParamDefined (const int num, const int nump) const
	Returns True if parameter "nump" of record "num" is defined (it is not if its type is ParamVoid)

int	ParamNumber (const int num, const int nump) const
	Returns record number of an entity referenced by a parameter of type Ident; 0 if no EntityNumber has been determined Note that it is used to reference Entities but also Sublists (sublists are not objects, but internal descriptions)

const occ::handle< Standard_Transient > &	ParamEntity (const int num, const int nump) const
	Returns the StepEntity referenced by a parameter Error if none.

int	ParamFirstRank (const int num) const
	Returns the absolute rank of the beginning of a record (its list is from ParamFirstRank+1 to ParamFirstRank+NbParams)

const occ::handle< Standard_Transient > &	BoundEntity (const int num) const
	Returns the entity bound to a record, set by SetEntities.

void	BindEntity (const int num, const occ::handle< Standard_Transient > &ent)
	Binds an entity to a record.

void	SetErrorLoad (const bool val)
	Sets the status "Error Load" on, to overside check fails <val> True : declares unloaded <val> False : declares loaded If not called before loading (see FileReaderTool), check fails give the status IsErrorLoad says if SetErrorLoad has been called by user ResetErrorLoad resets it (called by FileReaderTool) This allows to specify that the currently loaded entity remains unloaded (because of syntactic fail)

bool	IsErrorLoad () const
	Returns True if the status "Error Load" has been set (to True or False)

bool	ResetErrorLoad ()
	Returns the former value of status "Error Load" then resets it Used to read the status then ensure it is reset.

void	Destroy ()
	Destructor (waiting for memory management)

	~Interface_FileReaderData () override

Public Member Functions inherited from Standard_Transient
	Standard_Transient ()
	Empty constructor.

	Standard_Transient (const Standard_Transient &)
	Copy constructor – does nothing.

Standard_Transient &	operator= (const Standard_Transient &)
	Assignment operator, needed to avoid copying reference counter.

virtual	~Standard_Transient ()=default
	Destructor must be virtual.

virtual const opencascade::handle< Standard_Type > &	DynamicType () const
	Returns a type descriptor about this object.

bool	IsInstance (const opencascade::handle< Standard_Type > &theType) const
	Returns a true value if this is an instance of Type.

bool	IsInstance (const char *const theTypeName) const
	Returns a true value if this is an instance of TypeName.

bool	IsKind (const opencascade::handle< Standard_Type > &theType) const
	Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism.

bool	IsKind (const char *const theTypeName) const
	Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism.

Standard_Transient *	This () const
	Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero.

int	GetRefCount () const noexcept
	Get the reference counter of this object.

void	IncrementRefCounter () noexcept
	Increments the reference counter of this object. Uses relaxed memory ordering since incrementing only requires atomicity, not synchronization with other memory operations.

int	DecrementRefCounter () noexcept
	Decrements the reference counter of this object; returns the decremented value. Uses release ordering for the decrement to ensure all writes to the object are visible before the count reaches zero. An acquire fence is added only when the count reaches zero, ensuring proper synchronization before deletion. This is more efficient than using acq_rel for every decrement.

virtual void	Delete () const
	Memory deallocator for transient classes.

Static Public Member Functions
static double	Fastof (const char *const str)
	Same spec.s as standard <atof> but 5 times faster.

Static Public Member Functions inherited from Standard_Transient
static constexpr const char *	get_type_name ()
	Returns a type descriptor about this object.

static const opencascade::handle< Standard_Type > &	get_type_descriptor ()
	Returns type descriptor of Standard_Transient class.

Protected Member Functions
	Interface_FileReaderData (const int nbr, const int npar)
	Initializes arrays of Entities and of ParamLists attached to registered records <nbr> must be the maximum number of records to get (no way to extend it at run-time) : count entities and sub-entities ... <npar> is the total count of parameters (if it is not exact, it will be extended as necessary)

Interface_FileParameter &	ChangeParameter (const int numpar)
	Returns a parameter given its absolute rank in the file in order to be consulted or modified in specilaized actions.

void	ParamPosition (const int numpar, int &num, int &nump) const
	For a given absolute rank of parameter, determines the record to which its belongs, and the parameter number for it.

Additional Inherited Members
Public Types inherited from Standard_Transient
typedef void	base_type
	Returns a type descriptor about this object.

Detailed Description

This class defines services which permit to access Data issued from a File, in a form which does not depend of physical format : thus, each Record has an attached ParamList (to be managed) and resulting Entity.

Each Interface defines its own FileReaderData : on one hand by defining deferred methods given here, on the other hand by describing literal data and their accesses, with the help of basic classes such as String, Array1OfString, etc...

FileReaderData is used by a FileReaderTool, which is also specific of each Norm, to read an InterfaceModel of the Norm FileReaderData inherits TShared to be accessed by Handle : this allows FileReaderTool to define more easily the specific methods, and improves memory management.

Constructor & Destructor Documentation

◆ ~Interface_FileReaderData()

Interface_FileReaderData::~Interface_FileReaderData ( )

inlineoverride

◆ Interface_FileReaderData()

Interface_FileReaderData::Interface_FileReaderData	(	const int	nbr,
		const int	npar )

protected

Initializes arrays of Entities and of ParamLists attached to registered records <nbr> must be the maximum number of records to get (no way to extend it at run-time) : count entities and sub-entities ... <npar> is the total count of parameters (if it is not exact, it will be extended as necessary)

Hence, to each record can be bound an Entity and a list of Parameters. Each kind of FileReaderData can add other data, by having them in parallel (other arrays with same sizes) Else, it must manage binding between items and their data

Member Function Documentation

◆ AddParam() [1/3]

void Interface_FileReaderData::AddParam	(	const int	num,
		const char *const	aval,
		const Interface_ParamType	atype,
		const int	nument = 0 )

Adds a parameter to record no "num" and fills its fields (EntityNumber is optional) Warning : <aval> is assumed to be memory-managed elsewhere : it is NOT copied. This gives a best speed : strings remain stored in pages of characters.

◆ AddParam() [2/3]

void Interface_FileReaderData::AddParam	(	const int	num,
		const Interface_FileParameter &	FP )

Same as above, but gets a complete FileParameter Warning : Content of <FP> is NOT copied : its original address and space in memory are assumed to be managed elsewhere (see ParamSet)

◆ AddParam() [3/3]

void Interface_FileReaderData::AddParam	(	const int	num,
		const TCollection_AsciiString &	aval,
		const Interface_ParamType	atype,
		const int	nument = 0 )

Same as above, but gets a AsciiString from TCollection Remark that the content of the AsciiString is locally copied (because its content is most often lost after using)

◆ BindEntity()

void Interface_FileReaderData::BindEntity	(	const int	num,
		const occ::handle< Standard_Transient > &	ent )

Binds an entity to a record.

◆ BoundEntity()

const occ::handle< Standard_Transient > & Interface_FileReaderData::BoundEntity ( const int num ) const

Returns the entity bound to a record, set by SetEntities.

◆ ChangeParam()

Interface_FileParameter & Interface_FileReaderData::ChangeParam	(	const int	num,
		const int	nump )

Same as above, but in order to be modified on place.

◆ ChangeParameter()

Interface_FileParameter & Interface_FileReaderData::ChangeParameter ( const int numpar )

protected

Returns a parameter given its absolute rank in the file in order to be consulted or modified in specilaized actions.

◆ Destroy()

void Interface_FileReaderData::Destroy ( )

Destructor (waiting for memory management)

◆ Fastof()

static double Interface_FileReaderData::Fastof ( const char *const str )

static

Same spec.s as standard <atof> but 5 times faster.

◆ FindNextRecord()

virtual int Interface_FileReaderData::FindNextRecord ( const int num ) const

pure virtual

Determines the record number defining an Entity following a given record number. Specific to each sub-class of FileReaderData. Returning zero means no record found.

Implemented in IGESData_IGESReaderData, and StepData_StepReaderData.

◆ InitParams()

void Interface_FileReaderData::InitParams ( const int num )

attaches an empty ParamList to a Record

◆ IsErrorLoad()

bool Interface_FileReaderData::IsErrorLoad ( ) const

Returns True if the status "Error Load" has been set (to True or False)

◆ IsParamDefined()

bool Interface_FileReaderData::IsParamDefined	(	const int	num,
		const int	nump ) const

Returns True if parameter "nump" of record "num" is defined (it is not if its type is ParamVoid)

◆ NbEntities()

virtual int Interface_FileReaderData::NbEntities ( ) const

virtual

Returns the count of entities. Depending of each norm, records can be Entities or SubParts (SubList in STEP, SubGroup in SET ...). NbEntities counts only Entities, not Subs Used for memory reservation in InterfaceModel Default implementation uses FindNextRecord Can be redefined into a more performant way.

Reimplemented in IGESData_IGESReaderData, and StepData_StepReaderData.

◆ NbParams()

int Interface_FileReaderData::NbParams ( const int num ) const

Returns count of parameters attached to record "num" If <num> = 0, returns the total recorded count of parameters.

◆ NbRecords()

virtual int Interface_FileReaderData::NbRecords ( ) const

virtual

Returns the count of registered records That is, value given for Initialization (can be redefined)

◆ Param()

const Interface_FileParameter & Interface_FileReaderData::Param	(	const int	num,
		const int	nump ) const

Returns parameter "nump" of record "num", as a complete FileParameter.

◆ ParamCValue()

const char * Interface_FileReaderData::ParamCValue	(	const int	num,
		const int	nump ) const

Same as above, but as a CString was C++ : return const.

◆ ParamEntity()

const occ::handle< Standard_Transient > & Interface_FileReaderData::ParamEntity	(	const int	num,
		const int	nump ) const

Returns the StepEntity referenced by a parameter Error if none.

◆ ParamFirstRank()

int Interface_FileReaderData::ParamFirstRank ( const int num ) const

Returns the absolute rank of the beginning of a record (its list is from ParamFirstRank+1 to ParamFirstRank+NbParams)

◆ ParamNumber()

int Interface_FileReaderData::ParamNumber	(	const int	num,
		const int	nump ) const

Returns record number of an entity referenced by a parameter of type Ident; 0 if no EntityNumber has been determined Note that it is used to reference Entities but also Sublists (sublists are not objects, but internal descriptions)

◆ ParamPosition()

void Interface_FileReaderData::ParamPosition	(	const int	numpar,
		int &	num,
		int &	nump ) const

protected

For a given absolute rank of parameter, determines the record to which its belongs, and the parameter number for it.

◆ Params()

occ::handle< Interface_ParamList > Interface_FileReaderData::Params ( const int num ) const

Returns the complete ParamList of a record (read only) num = 0 to return the whole param list for the file.

◆ ParamType()

Interface_ParamType Interface_FileReaderData::ParamType	(	const int	num,
		const int	nump ) const

Returns type of parameter "nump" of record "num" Returns literal value of parameter "nump" of record "num" was C++ : return const &.

◆ ResetErrorLoad()

bool Interface_FileReaderData::ResetErrorLoad ( )

Returns the former value of status "Error Load" then resets it Used to read the status then ensure it is reset.

◆ SetErrorLoad()

void Interface_FileReaderData::SetErrorLoad ( const bool val )

Sets the status "Error Load" on, to overside check fails <val> True : declares unloaded <val> False : declares loaded If not called before loading (see FileReaderTool), check fails give the status IsErrorLoad says if SetErrorLoad has been called by user ResetErrorLoad resets it (called by FileReaderTool) This allows to specify that the currently loaded entity remains unloaded (because of syntactic fail)

◆ SetParam()

void Interface_FileReaderData::SetParam	(	const int	num,
		const int	nump,
		const Interface_FileParameter &	FP )

Sets a new value for a parameter of a record, given by : num : record number; nump : parameter number in the record.

The documentation for this class was generated from the following file:

Interface_FileReaderData.hxx

Public Member Functions

Static Public Member Functions

Protected Member Functions

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ ~Interface_FileReaderData()

◆ Interface_FileReaderData()

Member Function Documentation

◆ AddParam() [1/3]

◆ AddParam() [2/3]

◆ AddParam() [3/3]

◆ BindEntity()

◆ BoundEntity()

◆ ChangeParam()

◆ ChangeParameter()

◆ Destroy()

◆ Fastof()

◆ FindNextRecord()

◆ InitParams()

◆ IsErrorLoad()

◆ IsParamDefined()

◆ NbEntities()

◆ NbParams()

◆ NbRecords()

◆ Param()

◆ ParamCValue()

◆ ParamEntity()

◆ ParamFirstRank()

◆ ParamNumber()

◆ ParamPosition()

◆ Params()

◆ ParamType()

◆ ResetErrorLoad()

◆ SetErrorLoad()

◆ SetParam()