This class allows to create owners to all elements or nodes, both hidden and shown, but these owners user cannot select "by hands" in viewer. They means for internal application tasks, for example, receiving all owners, both for hidden and shown entities. More...

#include <MeshVS_DummySensitiveEntity.hxx>

Inheritance diagram for MeshVS_DummySensitiveEntity:

[legend]

Public Member Functions
	MeshVS_DummySensitiveEntity (const occ::handle< SelectMgr_EntityOwner > &theOwnerId)

bool	Matches (SelectBasics_SelectingVolumeManager &theMgr, SelectBasics_PickResult &thePickResult) override
	Checks whether sensitive overlaps current selecting volume. Stores minimum depth, distance to center of geometry and closest point detected into thePickResult.

int	NbSubElements () const override
	Returns the number of sub-entities or elements in sensitive entity. Is used to determine if entity is complex and needs to pre-build BVH at the creation of sensitive entity step or is light-weighted so the tree can be build on demand with unnoticeable delay.

Select3D_BndBox3d	BoundingBox () override
	Returns bounding box of a sensitive with transformation applied.

void	BVH () override
	Builds BVH tree for a sensitive if needed.

bool	ToBuildBVH () const override
	Returns TRUE if BVH tree is in invalidated state.

void	Clear () override
	Clears up all resources and memory.

bool	HasInitLocation () const override
	Returns true if the shape corresponding to the entity has init location.

gp_GTrsf	InvInitLocation () const override
	Returns inversed location transformation matrix if the shape corresponding to this entity has init location set. Otherwise, returns identity matrix.

gp_Pnt	CenterOfGeometry () const override
	Returns center of a sensitive with transformation applied.

Public Member Functions inherited from Select3D_SensitiveEntity
const occ::handle< SelectMgr_EntityOwner > &	OwnerId () const
	Returns pointer to owner of the entity.

virtual void	Set (const occ::handle< SelectMgr_EntityOwner > &theOwnerId)
	Sets owner of the entity.

int	SensitivityFactor () const
	allows a better sensitivity for a specific entity in selection algorithms useful for small sized entities.

void	SetSensitivityFactor (const int theNewSens)
	Allows to manage sensitivity of a particular sensitive entity.

virtual occ::handle< Select3D_SensitiveEntity >	GetConnected ()
	Originally this method intended to return sensitive entity with new location aLocation, but currently sensitive entities do not hold a location, instead HasLocation() and Location() methods call corresponding entity owner's methods. Thus all entities returned by GetConnected() share the same location propagated from corresponding selectable object. You must redefine this function for any type of sensitive entity which can accept another connected sensitive entity.

const occ::handle< Graphic3d_TransformPers > &	TransformPersistence () const
	Return transformation persistence.

virtual void	SetTransformPersistence (const occ::handle< Graphic3d_TransformPers > &theTrsfPers)
	Set transformation persistence.

const occ::handle< Graphic3d_Flipper > &	Flipper () const
	Return flipper metadata describing the runtime flip of the owning group, or null.

virtual void	SetFlippingOptions (const bool theIsEnabled, const gp_Ax2 &theRefPlane)
	Set flipping options. When enabled, creates a Graphic3d_Flipper for theRefPlane; otherwise clears the flipper.

virtual void	DumpJson (Standard_OStream &theOStream, int theDepth=-1) const
	Dumps the content of me into the stream.

Public Member Functions inherited from Standard_Transient
	Standard_Transient ()
	Empty constructor.

	Standard_Transient (const Standard_Transient &)
	Copy constructor – does nothing.

Standard_Transient &	operator= (const Standard_Transient &)
	Assignment operator, needed to avoid copying reference counter.

virtual	~Standard_Transient ()=default
	Destructor must be virtual.

virtual const opencascade::handle< Standard_Type > &	DynamicType () const
	Returns a type descriptor about this object.

bool	IsInstance (const opencascade::handle< Standard_Type > &theType) const
	Returns a true value if this is an instance of Type.

bool	IsInstance (const char *const theTypeName) const
	Returns a true value if this is an instance of TypeName.

bool	IsKind (const opencascade::handle< Standard_Type > &theType) const
	Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism.

bool	IsKind (const char *const theTypeName) const
	Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism.

Standard_Transient *	This () const
	Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero.

int	GetRefCount () const noexcept
	Get the reference counter of this object.

void	IncrementRefCounter () noexcept
	Increments the reference counter of this object. Uses relaxed memory ordering since incrementing only requires atomicity, not synchronization with other memory operations.

int	DecrementRefCounter () noexcept
	Decrements the reference counter of this object; returns the decremented value. Uses release ordering for the decrement to ensure all writes to the object are visible before the count reaches zero. An acquire fence is added only when the count reaches zero, ensuring proper synchronization before deletion. This is more efficient than using acq_rel for every decrement.

virtual void	Delete () const
	Memory deallocator for transient classes.

Additional Inherited Members
Public Types inherited from Standard_Transient
typedef void	base_type
	Returns a type descriptor about this object.

Static Public Member Functions inherited from Standard_Transient
static constexpr const char *	get_type_name ()
	Returns a type descriptor about this object.

static const opencascade::handle< Standard_Type > &	get_type_descriptor ()
	Returns type descriptor of Standard_Transient class.

Protected Member Functions inherited from Select3D_SensitiveEntity
	Select3D_SensitiveEntity (const occ::handle< SelectMgr_EntityOwner > &theOwnerId)

Protected Attributes inherited from Select3D_SensitiveEntity
occ::handle< SelectMgr_EntityOwner >	myOwnerId

occ::handle< Graphic3d_TransformPers >	myTrsfPers

occ::handle< Graphic3d_Flipper >	myFlipper

int	mySFactor

Detailed Description

This class allows to create owners to all elements or nodes, both hidden and shown, but these owners user cannot select "by hands" in viewer. They means for internal application tasks, for example, receiving all owners, both for hidden and shown entities.

Constructor & Destructor Documentation

◆ MeshVS_DummySensitiveEntity()

MeshVS_DummySensitiveEntity::MeshVS_DummySensitiveEntity ( const occ::handle< SelectMgr_EntityOwner > & theOwnerId )

Member Function Documentation

◆ BoundingBox()

Select3D_BndBox3d MeshVS_DummySensitiveEntity::BoundingBox ( )

overridevirtual

Returns bounding box of a sensitive with transformation applied.

Implements Select3D_SensitiveEntity.

◆ BVH()

void MeshVS_DummySensitiveEntity::BVH ( )

overridevirtual

Builds BVH tree for a sensitive if needed.

Reimplemented from Select3D_SensitiveEntity.

◆ CenterOfGeometry()

gp_Pnt MeshVS_DummySensitiveEntity::CenterOfGeometry ( ) const

inlineoverridevirtual

Returns center of a sensitive with transformation applied.

Implements Select3D_SensitiveEntity.

◆ Clear()

void MeshVS_DummySensitiveEntity::Clear ( )

overridevirtual

Clears up all resources and memory.

Reimplemented from Select3D_SensitiveEntity.

◆ HasInitLocation()

bool MeshVS_DummySensitiveEntity::HasInitLocation ( ) const

overridevirtual

Returns true if the shape corresponding to the entity has init location.

Reimplemented from Select3D_SensitiveEntity.

◆ InvInitLocation()

gp_GTrsf MeshVS_DummySensitiveEntity::InvInitLocation ( ) const

overridevirtual

Returns inversed location transformation matrix if the shape corresponding to this entity has init location set. Otherwise, returns identity matrix.

Reimplemented from Select3D_SensitiveEntity.

◆ Matches()

bool MeshVS_DummySensitiveEntity::Matches	(	SelectBasics_SelectingVolumeManager &	theMgr,
		SelectBasics_PickResult &	thePickResult )

overridevirtual

Checks whether sensitive overlaps current selecting volume. Stores minimum depth, distance to center of geometry and closest point detected into thePickResult.

Implements Select3D_SensitiveEntity.

◆ NbSubElements()

int MeshVS_DummySensitiveEntity::NbSubElements ( ) const

overridevirtual

Returns the number of sub-entities or elements in sensitive entity. Is used to determine if entity is complex and needs to pre-build BVH at the creation of sensitive entity step or is light-weighted so the tree can be build on demand with unnoticeable delay.

Implements Select3D_SensitiveEntity.

◆ ToBuildBVH()

bool MeshVS_DummySensitiveEntity::ToBuildBVH ( ) const

inlineoverridevirtual

Returns TRUE if BVH tree is in invalidated state.

Reimplemented from Select3D_SensitiveEntity.

The documentation for this class was generated from the following file:

MeshVS_DummySensitiveEntity.hxx

Public Member Functions

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ MeshVS_DummySensitiveEntity()

Member Function Documentation

◆ BoundingBox()

◆ BVH()

◆ CenterOfGeometry()

◆ Clear()

◆ HasInitLocation()

◆ InvInitLocation()

◆ Matches()

◆ NbSubElements()

◆ ToBuildBVH()