#include <BRepFill_ComputeCLine.hxx>

Public Member Functions
	BRepFill_ComputeCLine (const BRepFill_MultiLine &Line, const int degreemin=3, const int degreemax=8, const double Tolerance3d=1.0e-5, const double Tolerance2d=1.0e-5, const bool cutting=false, const AppParCurves_Constraint FirstC=AppParCurves_TangencyPoint, const AppParCurves_Constraint LastC=AppParCurves_TangencyPoint)
	The MultiLine <Line> will be approximated until tolerances will be reached. The approximation will be done from degreemin to degreemax with a cutting if the corresponding boolean is True.

	BRepFill_ComputeCLine (const int degreemin=3, const int degreemax=8, const double Tolerance3d=1.0e-05, const double Tolerance2d=1.0e-05, const bool cutting=false, const AppParCurves_Constraint FirstC=AppParCurves_TangencyPoint, const AppParCurves_Constraint LastC=AppParCurves_TangencyPoint)
	Initializes the fields of the algorithm.

void	Perform (const BRepFill_MultiLine &Line)
	runs the algorithm after having initialized the fields.

void	SetDegrees (const int degreemin, const int degreemax)
	changes the degrees of the approximation.

void	SetTolerances (const double Tolerance3d, const double Tolerance2d)
	Changes the tolerances of the approximation.

void	SetConstraints (const AppParCurves_Constraint FirstC, const AppParCurves_Constraint LastC)
	Changes the constraints of the approximation.

void	SetMaxSegments (const int theMaxSegments)
	Changes the max number of segments, which is allowed for cutting.

void	SetInvOrder (const bool theInvOrder)
	Set inverse order of degree selection: if theInvOrdr = true, current degree is chosen by inverse order - from maxdegree to mindegree. By default inverse order is used.

void	SetHangChecking (const bool theHangChecking)
	Set value of hang checking flag if this flag = true, possible hang of algorithm is checked and algorithm is forced to stop. By default hang checking is used.

bool	IsAllApproximated () const
	returns False if at a moment of the approximation, the status NoApproximation has been sent by the user when more points were needed.

bool	IsToleranceReached () const
	returns False if the status NoPointsAdded has been sent.

void	Error (const int Index, double &tol3d, double &tol2d) const
	returns the tolerances 2d and 3d of the <Index> MultiCurve.

int	NbMultiCurves () const
	Returns the number of MultiCurve doing the approximation of the MultiLine.

AppParCurves_MultiCurve	Value (const int Index=1) const
	returns the approximation MultiCurve of range <Index>.

void	Parameters (const int Index, double &firstp, double &lastp) const

Constructor & Destructor Documentation

◆ BRepFill_ComputeCLine() [1/2]

BRepFill_ComputeCLine::BRepFill_ComputeCLine	(	const BRepFill_MultiLine &	Line,
		const int	degreemin = 3,
		const int	degreemax = 8,
		const double	Tolerance3d = 1.0e-5,
		const double	Tolerance2d = 1.0e-5,
		const bool	cutting = false,
		const AppParCurves_Constraint	FirstC = AppParCurves_TangencyPoint,
		const AppParCurves_Constraint	LastC = AppParCurves_TangencyPoint )

The MultiLine <Line> will be approximated until tolerances will be reached. The approximation will be done from degreemin to degreemax with a cutting if the corresponding boolean is True.

◆ BRepFill_ComputeCLine() [2/2]

BRepFill_ComputeCLine::BRepFill_ComputeCLine	(	const int	degreemin = 3,
		const int	degreemax = 8,
		const double	Tolerance3d = 1.0e-05,
		const double	Tolerance2d = 1.0e-05,
		const bool	cutting = false,
		const AppParCurves_Constraint	FirstC = AppParCurves_TangencyPoint,
		const AppParCurves_Constraint	LastC = AppParCurves_TangencyPoint )

Initializes the fields of the algorithm.

Member Function Documentation

◆ Error()

void BRepFill_ComputeCLine::Error	(	const int	Index,
		double &	tol3d,
		double &	tol2d ) const

returns the tolerances 2d and 3d of the <Index> MultiCurve.

◆ IsAllApproximated()

bool BRepFill_ComputeCLine::IsAllApproximated ( ) const

returns False if at a moment of the approximation, the status NoApproximation has been sent by the user when more points were needed.

◆ IsToleranceReached()

bool BRepFill_ComputeCLine::IsToleranceReached ( ) const

returns False if the status NoPointsAdded has been sent.

◆ NbMultiCurves()

int BRepFill_ComputeCLine::NbMultiCurves ( ) const

Returns the number of MultiCurve doing the approximation of the MultiLine.

◆ Parameters()

void BRepFill_ComputeCLine::Parameters	(	const int	Index,
		double &	firstp,
		double &	lastp ) const

◆ Perform()

void BRepFill_ComputeCLine::Perform ( const BRepFill_MultiLine & Line )

runs the algorithm after having initialized the fields.

◆ SetConstraints()

void BRepFill_ComputeCLine::SetConstraints	(	const AppParCurves_Constraint	FirstC,
		const AppParCurves_Constraint	LastC )

Changes the constraints of the approximation.

◆ SetDegrees()

void BRepFill_ComputeCLine::SetDegrees	(	const int	degreemin,
		const int	degreemax )

changes the degrees of the approximation.

◆ SetHangChecking()

void BRepFill_ComputeCLine::SetHangChecking ( const bool theHangChecking )

Set value of hang checking flag if this flag = true, possible hang of algorithm is checked and algorithm is forced to stop. By default hang checking is used.

◆ SetInvOrder()

void BRepFill_ComputeCLine::SetInvOrder ( const bool theInvOrder )

Set inverse order of degree selection: if theInvOrdr = true, current degree is chosen by inverse order - from maxdegree to mindegree. By default inverse order is used.

◆ SetMaxSegments()

void BRepFill_ComputeCLine::SetMaxSegments ( const int theMaxSegments )

Changes the max number of segments, which is allowed for cutting.

◆ SetTolerances()

void BRepFill_ComputeCLine::SetTolerances	(	const double	Tolerance3d,
		const double	Tolerance2d )

Changes the tolerances of the approximation.

◆ Value()

AppParCurves_MultiCurve BRepFill_ComputeCLine::Value ( const int Index = 1 ) const

returns the approximation MultiCurve of range <Index>.

The documentation for this class was generated from the following file:

BRepFill_ComputeCLine.hxx

Public Member Functions