Build a draft surface along a wire. More...

#include <BRepOffsetAPI_MakeDraft.hxx>

Inheritance diagram for BRepOffsetAPI_MakeDraft:

[legend]

Public Member Functions
	BRepOffsetAPI_MakeDraft (const TopoDS_Shape &Shape, const gp_Dir &Dir, const Standard_Real Angle)
	Constructs the draft surface object defined by the shape Shape, the direction Dir, and the angle Angle. Shape must be a TopoDS_Wire, Topo_DS_Face or TopoDS_Shell with free boundaries. Exceptions Standard_NotDone if Shape is not a TopoDS_Wire, Topo_DS_Face or TopoDS_Shell with free boundaries.

void	SetOptions (const BRepBuilderAPI_TransitionMode Style=BRepBuilderAPI_RightCorner, const Standard_Real AngleMin=0.01, const Standard_Real AngleMax=3.0)
	Sets the options of this draft tool. If a transition has to be performed, it can be defined by the mode Style as RightCorner or RoundCorner, RightCorner being a corner defined by a sharp angle, and RoundCorner being a rounded corner. AngleMin is an angular tolerance used to detect whether a transition has to be performed or not. AngleMax sets the maximum value within which a RightCorner transition can be performed. AngleMin and AngleMax are expressed in radians.

void	SetDraft (const Standard_Boolean IsInternal=Standard_False)
	Sets the direction of the draft for this object. If IsInternal is true, the draft is internal to the argument Shape used in the constructor.

void	Perform (const Standard_Real LengthMax)
	Performs the draft using the length LengthMax as the maximum length for the corner edge between two draft faces.

void	Perform (const Handle< Geom_Surface > &Surface, const Standard_Boolean KeepInsideSurface=Standard_True)
	Performs the draft up to the surface Surface. If KeepInsideSurface is true, the part of Surface inside the draft is kept in the result.

void	Perform (const TopoDS_Shape &StopShape, const Standard_Boolean KeepOutSide=Standard_True)
	Performs the draft up to the shape StopShape. If KeepOutSide is true, the part of StopShape which is outside the Draft is kept in the result.

TopoDS_Shell	Shell () const
	Returns the shell resulting from performance of the draft along the wire.

virtual const TopTools_ListOfShape &	Generated (const TopoDS_Shape &S) override
	Returns the list of shapes generated from the shape .

Public Member Functions inherited from BRepBuilderAPI_MakeShape
virtual void	Build (const Message_ProgressRange &theRange=Message_ProgressRange())
	This is called by Shape(). It does nothing but may be redefined.

virtual const TopoDS_Shape &	Shape ()
	Returns a shape built by the shape construction algorithm. Raises exception StdFail_NotDone if the shape was not built.

	operator TopoDS_Shape ()

virtual const TopTools_ListOfShape &	Modified (const TopoDS_Shape &S)
	Returns the list of shapes modified from the shape .

virtual Standard_Boolean	IsDeleted (const TopoDS_Shape &S)
	Returns true if the shape S has been deleted.

Public Member Functions inherited from BRepBuilderAPI_Command
virtual	~BRepBuilderAPI_Command ()

virtual Standard_Boolean	IsDone () const

void	Check () const
	Raises NotDone if done is false.

Additional Inherited Members
Protected Member Functions inherited from BRepBuilderAPI_MakeShape
	BRepBuilderAPI_MakeShape ()

Protected Member Functions inherited from BRepBuilderAPI_Command
	BRepBuilderAPI_Command ()
	Set done to False.

void	Done ()
	Set done to true.

void	NotDone ()
	Set done to false.

Protected Attributes inherited from BRepBuilderAPI_MakeShape
TopoDS_Shape	myShape

TopTools_ListOfShape	myGenerated

Detailed Description

Build a draft surface along a wire.

Constructor & Destructor Documentation

◆ BRepOffsetAPI_MakeDraft()

BRepOffsetAPI_MakeDraft::BRepOffsetAPI_MakeDraft	(	const TopoDS_Shape &	Shape,
		const gp_Dir &	Dir,
		const Standard_Real	Angle )

Constructs the draft surface object defined by the shape Shape, the direction Dir, and the angle Angle. Shape must be a TopoDS_Wire, Topo_DS_Face or TopoDS_Shell with free boundaries. Exceptions Standard_NotDone if Shape is not a TopoDS_Wire, Topo_DS_Face or TopoDS_Shell with free boundaries.

Member Function Documentation

◆ Generated()

virtual const TopTools_ListOfShape & BRepOffsetAPI_MakeDraft::Generated ( const TopoDS_Shape & S )

overridevirtual

Returns the list of shapes generated from the shape .

Reimplemented from BRepBuilderAPI_MakeShape.

◆ Perform() [1/3]

void BRepOffsetAPI_MakeDraft::Perform	(	const Handle< Geom_Surface > &	Surface,
		const Standard_Boolean	KeepInsideSurface = Standard_True )

Performs the draft up to the surface Surface. If KeepInsideSurface is true, the part of Surface inside the draft is kept in the result.

◆ Perform() [2/3]

void BRepOffsetAPI_MakeDraft::Perform ( const Standard_Real LengthMax )

Performs the draft using the length LengthMax as the maximum length for the corner edge between two draft faces.

◆ Perform() [3/3]

void BRepOffsetAPI_MakeDraft::Perform	(	const TopoDS_Shape &	StopShape,
		const Standard_Boolean	KeepOutSide = Standard_True )

Performs the draft up to the shape StopShape. If KeepOutSide is true, the part of StopShape which is outside the Draft is kept in the result.

◆ SetDraft()

void BRepOffsetAPI_MakeDraft::SetDraft ( const Standard_Boolean IsInternal = Standard_False )

Sets the direction of the draft for this object. If IsInternal is true, the draft is internal to the argument Shape used in the constructor.

◆ SetOptions()

void BRepOffsetAPI_MakeDraft::SetOptions	(	const BRepBuilderAPI_TransitionMode	Style = BRepBuilderAPI_RightCorner,
		const Standard_Real	AngleMin = 0.01,
		const Standard_Real	AngleMax = 3.0 )

Sets the options of this draft tool. If a transition has to be performed, it can be defined by the mode Style as RightCorner or RoundCorner, RightCorner being a corner defined by a sharp angle, and RoundCorner being a rounded corner. AngleMin is an angular tolerance used to detect whether a transition has to be performed or not. AngleMax sets the maximum value within which a RightCorner transition can be performed. AngleMin and AngleMax are expressed in radians.

◆ Shell()

TopoDS_Shell BRepOffsetAPI_MakeDraft::Shell ( ) const

Returns the shell resulting from performance of the draft along the wire.

The documentation for this class was generated from the following file:

BRepOffsetAPI_MakeDraft.hxx

Public Member Functions

Additional Inherited Members