BRepOffsetAPI_MakePipe Class Reference

Describes functions to build pipes. A pipe is built a basis shape (called the profile) along a wire (called the spine) by sweeping. The profile must not contain solids. A MakePipe object provides a framework for: More...

#include <BRepOffsetAPI_MakePipe.hxx>

Inheritance diagram for BRepOffsetAPI_MakePipe:

Public Member Functions
	BRepOffsetAPI_MakePipe (const TopoDS_Wire &Spine, const TopoDS_Shape &Profile)
	Constructs a pipe by sweeping the shape Profile along the wire Spine.The angle made by the spine with the profile is maintained along the length of the pipe. Warning Spine must be G1 continuous; that is, on the connection vertex of two edges of the wire, the tangent vectors on the left and on the right must have the same direction, though not necessarily the same magnitude. Exceptions Standard_DomainError if the profile is a solid or a composite solid.
	BRepOffsetAPI_MakePipe (const TopoDS_Wire &Spine, const TopoDS_Shape &Profile, const GeomFill_Trihedron aMode, const Standard_Boolean ForceApproxC1=Standard_False)
	the same as previous but with setting of mode of sweep and the flag that indicates attempt to approximate a C1-continuous surface if a swept surface proved to be C0.
const BRepFill_Pipe &	Pipe () const
virtual void	Build (const Message_ProgressRange &theRange=Message_ProgressRange()) override
	Builds the resulting shape (redefined from MakeShape).
TopoDS_Shape	FirstShape () override
	Returns the TopoDS Shape of the bottom of the prism.
TopoDS_Shape	LastShape () override
	Returns the TopoDS Shape of the top of the prism.
virtual const TopTools_ListOfShape &	Generated (const TopoDS_Shape &S) override
	Returns the list of shapes generated from the shape .
TopoDS_Shape	Generated (const TopoDS_Shape &SSpine, const TopoDS_Shape &SProfile)
Standard_Real	ErrorOnSurface () const
Public Member Functions inherited from BRepPrimAPI_MakeSweep
Public Member Functions inherited from BRepBuilderAPI_MakeShape
virtual const TopoDS_Shape &	Shape ()
	Returns a shape built by the shape construction algorithm. Raises exception StdFail_NotDone if the shape was not built.
	operator TopoDS_Shape ()
virtual const TopTools_ListOfShape &	Modified (const TopoDS_Shape &S)
	Returns the list of shapes modified from the shape .
virtual Standard_Boolean	IsDeleted (const TopoDS_Shape &S)
	Returns true if the shape S has been deleted.
Public Member Functions inherited from BRepBuilderAPI_Command
virtual	~BRepBuilderAPI_Command ()
virtual Standard_Boolean	IsDone () const
void	Check () const
	Raises NotDone if done is false.

Additional Inherited Members
Protected Member Functions inherited from BRepBuilderAPI_MakeShape
	BRepBuilderAPI_MakeShape ()
Protected Member Functions inherited from BRepBuilderAPI_Command
	BRepBuilderAPI_Command ()
	Set done to False.
void	Done ()
	Set done to true.
void	NotDone ()
	Set done to false.
Protected Attributes inherited from BRepBuilderAPI_MakeShape
TopoDS_Shape	myShape
TopTools_ListOfShape	myGenerated

Detailed Description

Describes functions to build pipes. A pipe is built a basis shape (called the profile) along a wire (called the spine) by sweeping. The profile must not contain solids. A MakePipe object provides a framework for:

• defining the construction of a pipe,
• implementing the construction algorithm, and
• consulting the result. Warning The MakePipe class implements pipe constructions with G1 continuous spines only.

Constructor & Destructor Documentation

BRepOffsetAPI_MakePipe() [1/2]

BRepOffsetAPI_MakePipe::BRepOffsetAPI_MakePipe	(	const TopoDS_Wire &	Spine,
		const TopoDS_Shape &	Profile )

Constructs a pipe by sweeping the shape Profile along the wire Spine.The angle made by the spine with the profile is maintained along the length of the pipe. Warning Spine must be G1 continuous; that is, on the connection vertex of two edges of the wire, the tangent vectors on the left and on the right must have the same direction, though not necessarily the same magnitude. Exceptions Standard_DomainError if the profile is a solid or a composite solid.

BRepOffsetAPI_MakePipe() [2/2]

BRepOffsetAPI_MakePipe::BRepOffsetAPI_MakePipe	(	const TopoDS_Wire &	Spine,
		const TopoDS_Shape &	Profile,
		const GeomFill_Trihedron	aMode,
		const Standard_Boolean	ForceApproxC1 = Standard_False )

the same as previous but with setting of mode of sweep and the flag that indicates attempt to approximate a C1-continuous surface if a swept surface proved to be C0.

Member Function Documentation

Build()

virtual void BRepOffsetAPI_MakePipe::Build ( const Message_ProgressRange & theRange = Message_ProgressRange() )

overridevirtual

Builds the resulting shape (redefined from MakeShape).

Reimplemented from BRepBuilderAPI_MakeShape.

ErrorOnSurface()

Standard_Real BRepOffsetAPI_MakePipe::ErrorOnSurface

(

)

const

FirstShape()

TopoDS_Shape BRepOffsetAPI_MakePipe::FirstShape ( )

overridevirtual

Returns the TopoDS Shape of the bottom of the prism.

Implements BRepPrimAPI_MakeSweep.

Generated() [1/2]

virtual const TopTools_ListOfShape & BRepOffsetAPI_MakePipe::Generated ( const TopoDS_Shape & S )

overridevirtual

Returns the list of shapes generated from the shape .

Reimplemented from BRepBuilderAPI_MakeShape.

Generated() [2/2]

TopoDS_Shape BRepOffsetAPI_MakePipe::Generated	(	const TopoDS_Shape &	SSpine,
		const TopoDS_Shape &	SProfile )

LastShape()

TopoDS_Shape BRepOffsetAPI_MakePipe::LastShape ( )

overridevirtual

Returns the TopoDS Shape of the top of the prism.

Implements BRepPrimAPI_MakeSweep.

Pipe()

const BRepFill_Pipe & BRepOffsetAPI_MakePipe::Pipe

(

)

const

---

The documentation for this class was generated from the following file:

• BRepOffsetAPI_MakePipe.hxx