Open CASCADE Technology  7.3.1.dev
Public Member Functions
IFSelect_ContextWrite Class Reference

This class gathers various informations used by File Modifiers apart from the writer object, which is specific of the norm and of the physical format. More...

#include <IFSelect_ContextWrite.hxx>

Public Member Functions

 IFSelect_ContextWrite (const Handle< Interface_InterfaceModel > &model, const Handle< Interface_Protocol > &proto, const Handle< IFSelect_AppliedModifiers > &applieds, const Standard_CString filename)
 Prepares a ContextWrite with these informations : More...
 
 IFSelect_ContextWrite (const Handle< Interface_HGraph > &hgraph, const Handle< Interface_Protocol > &proto, const Handle< IFSelect_AppliedModifiers > &applieds, const Standard_CString filename)
 Same as above but with an already computed Graph. More...
 
Handle< Interface_InterfaceModelModel () const
 Returns the Model. More...
 
Handle< Interface_ProtocolProtocol () const
 Returns the Protocol;. More...
 
Standard_CString FileName () const
 Returns the File Name. More...
 
Handle< IFSelect_AppliedModifiersAppliedModifiers () const
 Returns the object AppliedModifiers. More...
 
const Interface_GraphGraph ()
 Returns the Graph, either given when created, else created the first time it is queried. More...
 
Standard_Integer NbModifiers () const
 Returns the count of recorded File Modifiers. More...
 
Standard_Boolean SetModifier (const Standard_Integer numod)
 Sets active the File Modifier n0 <numod> Then, it prepares the list of entities to consider, if any Returns False if <numod> out of range. More...
 
Handle< IFSelect_GeneralModifierFileModifier () const
 Returns the currently active File Modifier. Cast to be done Null if not properly set : must be test IsNull after casting. More...
 
Standard_Boolean IsForNone () const
 Returns True if no modifier is currently set. More...
 
Standard_Boolean IsForAll () const
 Returns True if the current modifier is to be applied to the whole model. Else, a restricted list of selected entities is defined, it can be exploited by the File Modifier. More...
 
Standard_Integer NbEntities () const
 Returns the total count of selected entities. More...
 
void Start ()
 Starts an iteration on selected items. It takes into account IsForAll/IsForNone, by really iterating on all selected items. More...
 
Standard_Boolean More () const
 Returns True until the iteration has finished. More...
 
void Next ()
 Advances the iteration. More...
 
Handle< Standard_TransientValue () const
 Returns the current selected entity in the model. More...
 
void AddCheck (const Handle< Interface_Check > &check)
 Adds a Check to the CheckList. If it is empty, nothing is done If it concerns an Entity from the Model (by SetEntity) to which another Check is attached, it is merged to it. Else, it is added or merged as to GlobalCheck. More...
 
void AddWarning (const Handle< Standard_Transient > &start, const Standard_CString mess, const Standard_CString orig="")
 Adds a Warning Message for an Entity from the Model If <start> is not an Entity from the model (e.g. the model itself) this message is added to Global Check. More...
 
void AddFail (const Handle< Standard_Transient > &start, const Standard_CString mess, const Standard_CString orig="")
 Adds a Fail Message for an Entity from the Model If <start> is not an Entity from the model (e.g. the model itself) this message is added to Global Check. More...
 
Handle< Interface_CheckCCheck (const Standard_Integer num=0)
 Returns a Check given an Entity number (in the Model) by default a Global Check. Creates it the first time. It can then be acknowledged on the spot, in condition that the caller works by reference ("Interface_Check& check = ...") More...
 
Handle< Interface_CheckCCheck (const Handle< Standard_Transient > &start)
 Returns a Check attached to an Entity from the Model It can then be acknowledged on the spot, in condition that the caller works by reference ("Interface_Check& check = ...") More...
 
Interface_CheckIterator CheckList () const
 Returns the complete CheckList. More...
 

Detailed Description

This class gathers various informations used by File Modifiers apart from the writer object, which is specific of the norm and of the physical format.

These informations are controlled by an object AppliedModifiers (if it is not defined, no modification is allowed on writing)

Furthermore, in return, ContextModif can record Checks, either one for all, or one for each Entity. It supports trace too.

Constructor & Destructor Documentation

◆ IFSelect_ContextWrite() [1/2]

IFSelect_ContextWrite::IFSelect_ContextWrite ( const Handle< Interface_InterfaceModel > &  model,
const Handle< Interface_Protocol > &  proto,
const Handle< IFSelect_AppliedModifiers > &  applieds,
const Standard_CString  filename 
)

Prepares a ContextWrite with these informations :

  • the model which is to be written
  • the protocol to be used
  • the filename
  • an object AppliedModifiers to work. It gives a list of FileModifiers to be ran, and for each one it can give a restricted list of entities (in the model), else all the model is considered

◆ IFSelect_ContextWrite() [2/2]

IFSelect_ContextWrite::IFSelect_ContextWrite ( const Handle< Interface_HGraph > &  hgraph,
const Handle< Interface_Protocol > &  proto,
const Handle< IFSelect_AppliedModifiers > &  applieds,
const Standard_CString  filename 
)

Same as above but with an already computed Graph.

Member Function Documentation

◆ AddCheck()

void IFSelect_ContextWrite::AddCheck ( const Handle< Interface_Check > &  check)

Adds a Check to the CheckList. If it is empty, nothing is done If it concerns an Entity from the Model (by SetEntity) to which another Check is attached, it is merged to it. Else, it is added or merged as to GlobalCheck.

◆ AddFail()

void IFSelect_ContextWrite::AddFail ( const Handle< Standard_Transient > &  start,
const Standard_CString  mess,
const Standard_CString  orig = "" 
)

Adds a Fail Message for an Entity from the Model If <start> is not an Entity from the model (e.g. the model itself) this message is added to Global Check.

◆ AddWarning()

void IFSelect_ContextWrite::AddWarning ( const Handle< Standard_Transient > &  start,
const Standard_CString  mess,
const Standard_CString  orig = "" 
)

Adds a Warning Message for an Entity from the Model If <start> is not an Entity from the model (e.g. the model itself) this message is added to Global Check.

◆ AppliedModifiers()

Handle< IFSelect_AppliedModifiers > IFSelect_ContextWrite::AppliedModifiers ( ) const

Returns the object AppliedModifiers.

◆ CCheck() [1/2]

Handle< Interface_Check > IFSelect_ContextWrite::CCheck ( const Standard_Integer  num = 0)

Returns a Check given an Entity number (in the Model) by default a Global Check. Creates it the first time. It can then be acknowledged on the spot, in condition that the caller works by reference ("Interface_Check& check = ...")

◆ CCheck() [2/2]

Handle< Interface_Check > IFSelect_ContextWrite::CCheck ( const Handle< Standard_Transient > &  start)

Returns a Check attached to an Entity from the Model It can then be acknowledged on the spot, in condition that the caller works by reference ("Interface_Check& check = ...")

◆ CheckList()

Interface_CheckIterator IFSelect_ContextWrite::CheckList ( ) const

Returns the complete CheckList.

◆ FileModifier()

Handle< IFSelect_GeneralModifier > IFSelect_ContextWrite::FileModifier ( ) const

Returns the currently active File Modifier. Cast to be done Null if not properly set : must be test IsNull after casting.

◆ FileName()

Standard_CString IFSelect_ContextWrite::FileName ( ) const

Returns the File Name.

◆ Graph()

const Interface_Graph& IFSelect_ContextWrite::Graph ( )

Returns the Graph, either given when created, else created the first time it is queried.

◆ IsForAll()

Standard_Boolean IFSelect_ContextWrite::IsForAll ( ) const

Returns True if the current modifier is to be applied to the whole model. Else, a restricted list of selected entities is defined, it can be exploited by the File Modifier.

◆ IsForNone()

Standard_Boolean IFSelect_ContextWrite::IsForNone ( ) const

Returns True if no modifier is currently set.

◆ Model()

Handle< Interface_InterfaceModel > IFSelect_ContextWrite::Model ( ) const

Returns the Model.

◆ More()

Standard_Boolean IFSelect_ContextWrite::More ( ) const

Returns True until the iteration has finished.

◆ NbEntities()

Standard_Integer IFSelect_ContextWrite::NbEntities ( ) const

Returns the total count of selected entities.

◆ NbModifiers()

Standard_Integer IFSelect_ContextWrite::NbModifiers ( ) const

Returns the count of recorded File Modifiers.

◆ Next()

void IFSelect_ContextWrite::Next ( )

Advances the iteration.

◆ Protocol()

Handle< Interface_Protocol > IFSelect_ContextWrite::Protocol ( ) const

Returns the Protocol;.

◆ SetModifier()

Standard_Boolean IFSelect_ContextWrite::SetModifier ( const Standard_Integer  numod)

Sets active the File Modifier n0 <numod> Then, it prepares the list of entities to consider, if any Returns False if <numod> out of range.

◆ Start()

void IFSelect_ContextWrite::Start ( )

Starts an iteration on selected items. It takes into account IsForAll/IsForNone, by really iterating on all selected items.

◆ Value()

Handle< Standard_Transient > IFSelect_ContextWrite::Value ( ) const

Returns the current selected entity in the model.


The documentation for this class was generated from the following file: