Provides methods to transfer basic geometric curves entities from IGES to CASCADE. These can be : More...

#include <IGESToBRep_BasicCurve.hxx>

Inheritance diagram for IGESToBRep_BasicCurve:

Public Member Functions
	IGESToBRep_BasicCurve ()
	Creates a tool BasicCurve ready to run, with epsilons set to 1.E-04, TheModeTopo to True, the optimization of the continuity to False.

	IGESToBRep_BasicCurve (const IGESToBRep_CurveAndSurface &CS)
	Creates a tool BasicCurve ready to run and sets its fields as CS's.

	IGESToBRep_BasicCurve (const Standard_Real eps, const Standard_Real epsGeom, const Standard_Real epsCoeff, const Standard_Boolean mode, const Standard_Boolean modeapprox, const Standard_Boolean optimized)
	Creates a tool BasicCurve ready to run.

Handle< Geom_Curve >	TransferBasicCurve (const Handle< IGESData_IGESEntity > &start)
	Transfert a IGESEntity which answer True to the member : IGESToBRep::IsBasicCurve(IGESEntity). If this Entity could not be converted, this member returns a NullEntity.

Handle< Geom2d_Curve >	Transfer2dBasicCurve (const Handle< IGESData_IGESEntity > &start)
	Transfert a IGESEntity which answer True to the member : IGESToBRep::IsBasicCurve(IGESEntity). The IGESEntity must be a curve UV and its associed TRSF must be planar .If this Entity could not be converted, this member returns a NullEntity.

Handle< Geom_Curve >	TransferBSplineCurve (const Handle< IGESGeom_BSplineCurve > &start)

Handle< Geom2d_Curve >	Transfer2dBSplineCurve (const Handle< IGESGeom_BSplineCurve > &start)

Handle< Geom_Curve >	TransferCircularArc (const Handle< IGESGeom_CircularArc > &start)

Handle< Geom2d_Curve >	Transfer2dCircularArc (const Handle< IGESGeom_CircularArc > &start)

Handle< Geom_Curve >	TransferConicArc (const Handle< IGESGeom_ConicArc > &start)

Handle< Geom2d_Curve >	Transfer2dConicArc (const Handle< IGESGeom_ConicArc > &start)

Handle< Geom_BSplineCurve >	TransferCopiousData (const Handle< IGESGeom_CopiousData > &start)

Handle< Geom2d_BSplineCurve >	Transfer2dCopiousData (const Handle< IGESGeom_CopiousData > &start)

Handle< Geom_Curve >	TransferLine (const Handle< IGESGeom_Line > &start)

Handle< Geom2d_Curve >	Transfer2dLine (const Handle< IGESGeom_Line > &start)

Handle< Geom_BSplineCurve >	TransferSplineCurve (const Handle< IGESGeom_SplineCurve > &start)

Handle< Geom2d_BSplineCurve >	Transfer2dSplineCurve (const Handle< IGESGeom_SplineCurve > &start)

Handle< Geom_Transformation >	TransferTransformation (const Handle< IGESGeom_TransformationMatrix > &start)

Public Member Functions inherited from IGESToBRep_CurveAndSurface
	IGESToBRep_CurveAndSurface ()
	Creates a tool CurveAndSurface ready to run, with epsilons set to 1.E-04, myModeTopo to True, the optimization of the continuity to False.

	IGESToBRep_CurveAndSurface (const Standard_Real eps, const Standard_Real epsGeom, const Standard_Real epsCoeff, const Standard_Boolean mode, const Standard_Boolean modeapprox, const Standard_Boolean optimized)
	Creates a tool CurveAndSurface ready to run.

void	Init ()
	Initializes the field of the tool CurveAndSurface with default creating values.

void	SetEpsilon (const Standard_Real eps)
	Changes the value of "myEps".

Standard_Real	GetEpsilon () const
	Returns the value of "myEps".

void	SetEpsCoeff (const Standard_Real eps)
	Changes the value of "myEpsCoeff".

Standard_Real	GetEpsCoeff () const
	Returns the value of "myEpsCoeff".

void	SetEpsGeom (const Standard_Real eps)
	Changes the value of "myEpsGeom".

Standard_Real	GetEpsGeom () const
	Returns the value of "myEpsGeom".

void	SetMinTol (const Standard_Real mintol)
	Changes the value of "myMinTol".

void	SetMaxTol (const Standard_Real maxtol)
	Changes the value of "myMaxTol".

void	UpdateMinMaxTol ()
	Sets values of "myMinTol" and "myMaxTol" as follows myMaxTol = Max ("read.maxprecision.val", myEpsGeom * myUnitFactor) myMinTol = Precision::Confusion() Remark: This method is automatically invoked each time the values of "myEpsGeom" or "myUnitFactor" are changed.

Standard_Real	GetMinTol () const
	Returns the value of "myMinTol".

Standard_Real	GetMaxTol () const
	Returns the value of "myMaxTol".

void	SetModeApprox (const Standard_Boolean mode)
	Changes the value of "myModeApprox".

Standard_Boolean	GetModeApprox () const
	Returns the value of "myModeApprox".

void	SetModeTransfer (const Standard_Boolean mode)
	Changes the value of "myModeIsTopo".

Standard_Boolean	GetModeTransfer () const
	Returns the value of "myModeIsTopo".

void	SetOptimized (const Standard_Boolean optimized)
	Changes the value of "myContIsOpti".

Standard_Boolean	GetOptimized () const
	Returns the value of "myContIsOpti".

Standard_Real	GetUnitFactor () const
	Returns the value of " myUnitFactor".

void	SetSurfaceCurve (const Standard_Integer ival)
	Changes the value of "mySurfaceCurve".

Standard_Integer	GetSurfaceCurve () const
	Returns the value of " mySurfaceCurve" 0 = value in file , 2 = kepp 2d and compute 3d 3 = keep 3d and compute 2d.

void	SetModel (const Handle< IGESData_IGESModel > &model)
	Set the value of "myModel".

Handle< IGESData_IGESModel >	GetModel () const
	Returns the value of "myModel".

void	SetContinuity (const Standard_Integer continuity)
	Changes the value of "myContinuity" if continuity = 0 do nothing else if continuity = 1 try C1 if continuity = 2 try C2.

Standard_Integer	GetContinuity () const
	Returns the value of "myContinuity".

void	SetTransferProcess (const Handle< Transfer_TransientProcess > &TP)
	Set the value of "myMsgReg".

Handle< Transfer_TransientProcess >	GetTransferProcess () const
	Returns the value of "myMsgReg".

TopoDS_Shape	TransferCurveAndSurface (const Handle< IGESData_IGESEntity > &start, const Message_ProgressRange &theProgress=Message_ProgressRange())
	Returns the result of the transfert of any IGES Curve or Surface Entity. If the transfer has failed, this member return a NullEntity.

TopoDS_Shape	TransferGeometry (const Handle< IGESData_IGESEntity > &start, const Message_ProgressRange &theProgress=Message_ProgressRange())
	Returns the result of the transfert the geometry of any IGESEntity. If the transfer has failed, this member return a NullEntity.

void	SendFail (const Handle< IGESData_IGESEntity > &start, const Message_Msg &amsg)
	Records a new Fail message.

void	SendWarning (const Handle< IGESData_IGESEntity > &start, const Message_Msg &amsg)
	Records a new Warning message.

void	SendMsg (const Handle< IGESData_IGESEntity > &start, const Message_Msg &amsg)
	Records a new Information message from the definition of a Msg (Original+Value)

Standard_Boolean	HasShapeResult (const Handle< IGESData_IGESEntity > &start) const
	Returns True if start was already treated and has a result in "myMap" else returns False.

TopoDS_Shape	GetShapeResult (const Handle< IGESData_IGESEntity > &start) const
	Returns the result of the transfer of the IGESEntity "start" contained in "myMap" . (if HasShapeResult is True).

void	SetShapeResult (const Handle< IGESData_IGESEntity > &start, const TopoDS_Shape &result)
	set in "myMap" the result of the transfer of the IGESEntity "start".

Standard_Integer	NbShapeResult (const Handle< IGESData_IGESEntity > &start) const
	Returns the number of shapes results contained in "myMap" for the IGESEntity start ( type VertexList or EdgeList).

TopoDS_Shape	GetShapeResult (const Handle< IGESData_IGESEntity > &start, const Standard_Integer num) const
	Returns the numth result of the IGESEntity start (type VertexList or EdgeList) in "myMap". (if NbShapeResult is not null).

void	AddShapeResult (const Handle< IGESData_IGESEntity > &start, const TopoDS_Shape &result)
	set in "myMap" the result of the transfer of the entity of the IGESEntity start ( type VertexList or EdgeList).

void	SetSurface (const Handle< Geom_Surface > &theSurface)

Handle< Geom_Surface >	Surface () const

Standard_Real	GetUVResolution ()

Detailed Description

Provides methods to transfer basic geometric curves entities from IGES to CASCADE. These can be :

Circular arc
Conic arc
Spline curve
BSpline curve
Line
Copious data
Point
Transformation matrix

Constructor & Destructor Documentation

◆ IGESToBRep_BasicCurve() [1/3]

IGESToBRep_BasicCurve::IGESToBRep_BasicCurve ( )

Creates a tool BasicCurve ready to run, with epsilons set to 1.E-04, TheModeTopo to True, the optimization of the continuity to False.

◆ IGESToBRep_BasicCurve() [2/3]

IGESToBRep_BasicCurve::IGESToBRep_BasicCurve ( const IGESToBRep_CurveAndSurface & CS )

Creates a tool BasicCurve ready to run and sets its fields as CS's.

◆ IGESToBRep_BasicCurve() [3/3]

IGESToBRep_BasicCurve::IGESToBRep_BasicCurve	(	const Standard_Real	eps,
		const Standard_Real	epsGeom,
		const Standard_Real	epsCoeff,
		const Standard_Boolean	mode,
		const Standard_Boolean	modeapprox,
		const Standard_Boolean	optimized )

Creates a tool BasicCurve ready to run.

Member Function Documentation

◆ Transfer2dBasicCurve()

Handle< Geom2d_Curve > IGESToBRep_BasicCurve::Transfer2dBasicCurve ( const Handle< IGESData_IGESEntity > & start )

Transfert a IGESEntity which answer True to the member : IGESToBRep::IsBasicCurve(IGESEntity). The IGESEntity must be a curve UV and its associed TRSF must be planar .If this Entity could not be converted, this member returns a NullEntity.

◆ Transfer2dBSplineCurve()

Handle< Geom2d_Curve > IGESToBRep_BasicCurve::Transfer2dBSplineCurve ( const Handle< IGESGeom_BSplineCurve > & start )

◆ Transfer2dCircularArc()

Handle< Geom2d_Curve > IGESToBRep_BasicCurve::Transfer2dCircularArc ( const Handle< IGESGeom_CircularArc > & start )

◆ Transfer2dConicArc()

Handle< Geom2d_Curve > IGESToBRep_BasicCurve::Transfer2dConicArc ( const Handle< IGESGeom_ConicArc > & start )

◆ Transfer2dCopiousData()

Handle< Geom2d_BSplineCurve > IGESToBRep_BasicCurve::Transfer2dCopiousData ( const Handle< IGESGeom_CopiousData > & start )

◆ Transfer2dLine()

Handle< Geom2d_Curve > IGESToBRep_BasicCurve::Transfer2dLine ( const Handle< IGESGeom_Line > & start )

◆ Transfer2dSplineCurve()

Handle< Geom2d_BSplineCurve > IGESToBRep_BasicCurve::Transfer2dSplineCurve ( const Handle< IGESGeom_SplineCurve > & start )

◆ TransferBasicCurve()

Handle< Geom_Curve > IGESToBRep_BasicCurve::TransferBasicCurve ( const Handle< IGESData_IGESEntity > & start )

Transfert a IGESEntity which answer True to the member : IGESToBRep::IsBasicCurve(IGESEntity). If this Entity could not be converted, this member returns a NullEntity.

◆ TransferBSplineCurve()

Handle< Geom_Curve > IGESToBRep_BasicCurve::TransferBSplineCurve ( const Handle< IGESGeom_BSplineCurve > & start )

◆ TransferCircularArc()

Handle< Geom_Curve > IGESToBRep_BasicCurve::TransferCircularArc ( const Handle< IGESGeom_CircularArc > & start )

◆ TransferConicArc()

Handle< Geom_Curve > IGESToBRep_BasicCurve::TransferConicArc ( const Handle< IGESGeom_ConicArc > & start )

◆ TransferCopiousData()

Handle< Geom_BSplineCurve > IGESToBRep_BasicCurve::TransferCopiousData ( const Handle< IGESGeom_CopiousData > & start )

◆ TransferLine()

Handle< Geom_Curve > IGESToBRep_BasicCurve::TransferLine ( const Handle< IGESGeom_Line > & start )

◆ TransferSplineCurve()

Handle< Geom_BSplineCurve > IGESToBRep_BasicCurve::TransferSplineCurve ( const Handle< IGESGeom_SplineCurve > & start )

◆ TransferTransformation()

Handle< Geom_Transformation > IGESToBRep_BasicCurve::TransferTransformation ( const Handle< IGESGeom_TransformationMatrix > & start )

The documentation for this class was generated from the following file:

IGESToBRep_BasicCurve.hxx

Public Member Functions