This class is auxiliary class (data storage) used in ComposeShell. It is intended for representing segment of the wire (or whole wire). The segment itself is represented by ShapeExtend_WireData. In addition, some associated data necessary for computations are stored: More...

#include <ShapeFix_WireSegment.hxx>

Public Member Functions
	ShapeFix_WireSegment ()
	Creates empty segment.

	ShapeFix_WireSegment (const Handle< ShapeExtend_WireData > &wire, const TopAbs_Orientation ori=TopAbs_EXTERNAL)
	Creates segment and initializes it with wire and orientation.

	ShapeFix_WireSegment (const TopoDS_Wire &wire, const TopAbs_Orientation ori=TopAbs_EXTERNAL)
	Creates segment and initializes it with wire and orientation.

void	Clear ()
	Clears all fields.

void	Load (const Handle< ShapeExtend_WireData > &wire)
	Loads wire.

const Handle< ShapeExtend_WireData > &	WireData () const
	Returns wire.

void	Orientation (const TopAbs_Orientation ori)
	Sets orientation flag.

TopAbs_Orientation	Orientation () const
	Returns orientation flag.

TopoDS_Vertex	FirstVertex () const
	Returns first vertex of the first edge in the wire (no dependence on Orientation()).

TopoDS_Vertex	LastVertex () const
	Returns last vertex of the last edge in the wire (no dependence on Orientation()).

Standard_Boolean	IsClosed () const
	Returns True if FirstVertex() == LastVertex()

Standard_Integer	NbEdges () const
	Returns Number of edges in the wire.

TopoDS_Edge	Edge (const Standard_Integer i) const
	Returns edge by given index in the wire.

void	SetEdge (const Standard_Integer i, const TopoDS_Edge &edge)
	Replaces edge at index i by new one.

void	AddEdge (const Standard_Integer i, const TopoDS_Edge &edge)
	Insert a new edge with index i and implicitly defined patch indices (indefinite patch). If i==0, edge is inserted at end of wire.

void	AddEdge (const Standard_Integer i, const TopoDS_Edge &edge, const Standard_Integer iumin, const Standard_Integer iumax, const Standard_Integer ivmin, const Standard_Integer ivmax)
	Insert a new edge with index i and explicitly defined patch indices. If i==0, edge is inserted at end of wire.

void	SetPatchIndex (const Standard_Integer i, const Standard_Integer iumin, const Standard_Integer iumax, const Standard_Integer ivmin, const Standard_Integer ivmax)
	Set patch indices for edge i.

void	DefineIUMin (const Standard_Integer i, const Standard_Integer iumin)

void	DefineIUMax (const Standard_Integer i, const Standard_Integer iumax)

void	DefineIVMin (const Standard_Integer i, const Standard_Integer ivmin)

void	DefineIVMax (const Standard_Integer i, const Standard_Integer ivmax)
	Modify minimal or maximal patch index for edge i. The corresponding patch index for that edge is modified so as to satisfy eq. iumin <= myIUMin(i) <= myIUMax(i) <= iumax.

void	GetPatchIndex (const Standard_Integer i, Standard_Integer &iumin, Standard_Integer &iumax, Standard_Integer &ivmin, Standard_Integer &ivmax) const
	Returns patch indices for edge i.

Standard_Boolean	CheckPatchIndex (const Standard_Integer i) const
	Checks patch indices for edge i to satisfy equations IUMin(i) <= IUMax(i) <= IUMin(i)+1.

void	SetVertex (const TopoDS_Vertex &theVertex)

TopoDS_Vertex	GetVertex () const

Standard_Boolean	IsVertex () const

Detailed Description

This class is auxiliary class (data storage) used in ComposeShell. It is intended for representing segment of the wire (or whole wire). The segment itself is represented by ShapeExtend_WireData. In addition, some associated data necessary for computations are stored:

Orientation flag - determines current use of the segment and used for parity checking:

TopAbs_FORWARD and TopAbs_REVERSED - says that segment was traversed once in the corresponding direction, and hence it should be traversed once more in opposite direction;

TopAbs_EXTERNAL - the segment was not yet traversed in any direction (i.e. not yet used as boundary)

TopAbs_INTERNAL - the segment was traversed in both directions and hence is out of further work.

Segments of initial bounding wires are created with orientation REVERSED (for outer wire) or FORWARD (for inner wires), and segments of splitting seams - with orientation EXTERNAL.

Constructor & Destructor Documentation

◆ ShapeFix_WireSegment() [1/3]

ShapeFix_WireSegment::ShapeFix_WireSegment ( )

Creates empty segment.

◆ ShapeFix_WireSegment() [2/3]

ShapeFix_WireSegment::ShapeFix_WireSegment	(	const Handle< ShapeExtend_WireData > &	wire,
		const TopAbs_Orientation	ori = TopAbs_EXTERNAL )

Creates segment and initializes it with wire and orientation.

◆ ShapeFix_WireSegment() [3/3]

ShapeFix_WireSegment::ShapeFix_WireSegment	(	const TopoDS_Wire &	wire,
		const TopAbs_Orientation	ori = TopAbs_EXTERNAL )

Creates segment and initializes it with wire and orientation.

Member Function Documentation

◆ AddEdge() [1/2]

void ShapeFix_WireSegment::AddEdge	(	const Standard_Integer	i,
		const TopoDS_Edge &	edge )

Insert a new edge with index i and implicitly defined patch indices (indefinite patch). If i==0, edge is inserted at end of wire.

◆ AddEdge() [2/2]

void ShapeFix_WireSegment::AddEdge	(	const Standard_Integer	i,
		const TopoDS_Edge &	edge,
		const Standard_Integer	iumin,
		const Standard_Integer	iumax,
		const Standard_Integer	ivmin,
		const Standard_Integer	ivmax )

Insert a new edge with index i and explicitly defined patch indices. If i==0, edge is inserted at end of wire.

◆ CheckPatchIndex()

Standard_Boolean ShapeFix_WireSegment::CheckPatchIndex ( const Standard_Integer i ) const

Checks patch indices for edge i to satisfy equations IUMin(i) <= IUMax(i) <= IUMin(i)+1.

◆ Clear()

void ShapeFix_WireSegment::Clear ( )

Clears all fields.

◆ DefineIUMax()

void ShapeFix_WireSegment::DefineIUMax	(	const Standard_Integer	i,
		const Standard_Integer	iumax )

◆ DefineIUMin()

void ShapeFix_WireSegment::DefineIUMin	(	const Standard_Integer	i,
		const Standard_Integer	iumin )

◆ DefineIVMax()

void ShapeFix_WireSegment::DefineIVMax	(	const Standard_Integer	i,
		const Standard_Integer	ivmax )

Modify minimal or maximal patch index for edge i. The corresponding patch index for that edge is modified so as to satisfy eq. iumin <= myIUMin(i) <= myIUMax(i) <= iumax.

◆ DefineIVMin()

void ShapeFix_WireSegment::DefineIVMin	(	const Standard_Integer	i,
		const Standard_Integer	ivmin )

◆ Edge()

TopoDS_Edge ShapeFix_WireSegment::Edge ( const Standard_Integer i ) const

Returns edge by given index in the wire.

◆ FirstVertex()

TopoDS_Vertex ShapeFix_WireSegment::FirstVertex ( ) const

Returns first vertex of the first edge in the wire (no dependence on Orientation()).

◆ GetPatchIndex()

void ShapeFix_WireSegment::GetPatchIndex	(	const Standard_Integer	i,
		Standard_Integer &	iumin,
		Standard_Integer &	iumax,
		Standard_Integer &	ivmin,
		Standard_Integer &	ivmax ) const

Returns patch indices for edge i.

◆ GetVertex()

TopoDS_Vertex ShapeFix_WireSegment::GetVertex ( ) const

◆ IsClosed()

Standard_Boolean ShapeFix_WireSegment::IsClosed ( ) const

Returns True if FirstVertex() == LastVertex()

◆ IsVertex()

Standard_Boolean ShapeFix_WireSegment::IsVertex ( ) const

◆ LastVertex()

TopoDS_Vertex ShapeFix_WireSegment::LastVertex ( ) const

Returns last vertex of the last edge in the wire (no dependence on Orientation()).

◆ Load()

void ShapeFix_WireSegment::Load ( const Handle< ShapeExtend_WireData > & wire )

Loads wire.

◆ NbEdges()

Standard_Integer ShapeFix_WireSegment::NbEdges ( ) const

Returns Number of edges in the wire.

◆ Orientation() [1/2]

TopAbs_Orientation ShapeFix_WireSegment::Orientation ( ) const

Returns orientation flag.

◆ Orientation() [2/2]

void ShapeFix_WireSegment::Orientation ( const TopAbs_Orientation ori )

Sets orientation flag.

◆ SetEdge()

void ShapeFix_WireSegment::SetEdge	(	const Standard_Integer	i,
		const TopoDS_Edge &	edge )

Replaces edge at index i by new one.

◆ SetPatchIndex()

void ShapeFix_WireSegment::SetPatchIndex	(	const Standard_Integer	i,
		const Standard_Integer	iumin,
		const Standard_Integer	iumax,
		const Standard_Integer	ivmin,
		const Standard_Integer	ivmax )

Set patch indices for edge i.

◆ SetVertex()

void ShapeFix_WireSegment::SetVertex ( const TopoDS_Vertex & theVertex )

◆ WireData()

const Handle< ShapeExtend_WireData > & ShapeFix_WireSegment::WireData ( ) const

Returns wire.

The documentation for this class was generated from the following file:

ShapeFix_WireSegment.hxx

Public Member Functions