Describes a circle in 3D space. A circle is defined by its radius and positioned in space with a coordinate system (a gp_Ax2 object) as follows: More...

#include <gp_Circ.hxx>

Public Member Functions
	gp_Circ ()
	Creates an indefinite circle. More...

	gp_Circ (const gp_Ax2 &A2, const Standard_Real Radius)
	A2 locates the circle and gives its orientation in 3D space. Warnings : It is not forbidden to create a circle with Radius = 0.0 Raises ConstructionError if Radius < 0.0. More...

void	SetAxis (const gp_Ax1 &A1)
	Changes the main axis of the circle. It is the axis perpendicular to the plane of the circle. Raises ConstructionError if the direction of A1 is parallel to the "XAxis" of the circle. More...

void	SetLocation (const gp_Pnt &P)
	Changes the "Location" point (center) of the circle. More...

void	SetPosition (const gp_Ax2 &A2)
	Changes the position of the circle. More...

void	SetRadius (const Standard_Real Radius)
	Modifies the radius of this circle. Warning. This class does not prevent the creation of a circle where Radius is null. Exceptions Standard_ConstructionError if Radius is negative. More...

Standard_Real	Area () const
	Computes the area of the circle. More...

const gp_Ax1 &	Axis () const
	Returns the main axis of the circle. It is the axis perpendicular to the plane of the circle, passing through the "Location" point (center) of the circle. More...

Standard_Real	Length () const
	Computes the circumference of the circle. More...

const gp_Pnt &	Location () const
	Returns the center of the circle. It is the "Location" point of the local coordinate system of the circle. More...

const gp_Ax2 &	Position () const
	Returns the position of the circle. It is the local coordinate system of the circle. More...

Standard_Real	Radius () const
	Returns the radius of this circle. More...

gp_Ax1	XAxis () const
	Returns the "XAxis" of the circle. This axis is perpendicular to the axis of the conic. This axis and the "Yaxis" define the plane of the conic. More...

gp_Ax1	YAxis () const
	Returns the "YAxis" of the circle. This axis and the "Xaxis" define the plane of the conic. The "YAxis" is perpendicular to the "Xaxis". More...

Standard_Real	Distance (const gp_Pnt &P) const
	Computes the minimum of distance between the point P and any point on the circumference of the circle. More...

Standard_Real	SquareDistance (const gp_Pnt &P) const
	Computes the square distance between <me> and the point P. More...

Standard_Boolean	Contains (const gp_Pnt &P, const Standard_Real LinearTolerance) const
	Returns True if the point P is on the circumference. The distance between <me> and. More...

void	Mirror (const gp_Pnt &P)

gp_Circ	Mirrored (const gp_Pnt &P) const
	Performs the symmetrical transformation of a circle with respect to the point P which is the center of the symmetry. More...

void	Mirror (const gp_Ax1 &A1)

gp_Circ	Mirrored (const gp_Ax1 &A1) const
	Performs the symmetrical transformation of a circle with respect to an axis placement which is the axis of the symmetry. More...

void	Mirror (const gp_Ax2 &A2)

gp_Circ	Mirrored (const gp_Ax2 &A2) const
	Performs the symmetrical transformation of a circle with respect to a plane. The axis placement A2 locates the plane of the of the symmetry : (Location, XDirection, YDirection). More...

void	Rotate (const gp_Ax1 &A1, const Standard_Real Ang)

gp_Circ	Rotated (const gp_Ax1 &A1, const Standard_Real Ang) const
	Rotates a circle. A1 is the axis of the rotation. Ang is the angular value of the rotation in radians. More...

void	Scale (const gp_Pnt &P, const Standard_Real S)

gp_Circ	Scaled (const gp_Pnt &P, const Standard_Real S) const
	Scales a circle. S is the scaling value. Warnings : If S is negative the radius stay positive but the "XAxis" and the "YAxis" are reversed as for an ellipse. More...

void	Transform (const gp_Trsf &T)

gp_Circ	Transformed (const gp_Trsf &T) const
	Transforms a circle with the transformation T from class Trsf. More...

void	Translate (const gp_Vec &V)

gp_Circ	Translated (const gp_Vec &V) const
	Translates a circle in the direction of the vector V. The magnitude of the translation is the vector's magnitude. More...

void	Translate (const gp_Pnt &P1, const gp_Pnt &P2)

gp_Circ	Translated (const gp_Pnt &P1, const gp_Pnt &P2) const
	Translates a circle from the point P1 to the point P2. More...

Detailed Description

Describes a circle in 3D space. A circle is defined by its radius and positioned in space with a coordinate system (a gp_Ax2 object) as follows:

the origin of the coordinate system is the center of the circle, and
the origin, "X Direction" and "Y Direction" of the coordinate system define the plane of the circle. This positioning coordinate system is the "local coordinate system" of the circle. Its "main Direction" gives the normal vector to the plane of the circle. The "main Axis" of the coordinate system is referred to as the "Axis" of the circle. Note: when a gp_Circ circle is converted into a Geom_Circle circle, some implicit properties of the circle are used explicitly:
the "main Direction" of the local coordinate system gives an implicit orientation to the circle (and defines its trigonometric sense),
this orientation corresponds to the direction in which parameter values increase,
the starting point for parameterization is that of the "X Axis" of the local coordinate system (i.e. the "X Axis" of the circle). See Also gce_MakeCirc which provides functions for more complex circle constructions Geom_Circle which provides additional functions for constructing circles and works, in particular, with the parametric equations of circles

Constructor & Destructor Documentation

gp_Circ::gp_Circ ( )

Creates an indefinite circle.

gp_Circ::gp_Circ	(	const gp_Ax2 &	A2,
		const Standard_Real	Radius
	)

A2 locates the circle and gives its orientation in 3D space. Warnings : It is not forbidden to create a circle with Radius = 0.0 Raises ConstructionError if Radius < 0.0.

Member Function Documentation

Standard_Real gp_Circ::Area ( ) const

Computes the area of the circle.

const gp_Ax1& gp_Circ::Axis ( ) const

Returns the main axis of the circle. It is the axis perpendicular to the plane of the circle, passing through the "Location" point (center) of the circle.

Standard_Boolean gp_Circ::Contains	(	const gp_Pnt &	P,
		const Standard_Real	LinearTolerance
	)		const

Returns True if the point P is on the circumference. The distance between <me> and.

must be lower or equal to LinearTolerance.

Standard_Real gp_Circ::Distance ( const gp_Pnt & P ) const

Computes the minimum of distance between the point P and any point on the circumference of the circle.

Standard_Real gp_Circ::Length ( ) const

Computes the circumference of the circle.

const gp_Pnt& gp_Circ::Location ( ) const

Returns the center of the circle. It is the "Location" point of the local coordinate system of the circle.

void gp_Circ::Mirror ( const gp_Pnt & P )

void gp_Circ::Mirror ( const gp_Ax1 & A1 )

void gp_Circ::Mirror ( const gp_Ax2 & A2 )

gp_Circ gp_Circ::Mirrored ( const gp_Pnt & P ) const

Performs the symmetrical transformation of a circle with respect to the point P which is the center of the symmetry.

gp_Circ gp_Circ::Mirrored ( const gp_Ax1 & A1 ) const

Performs the symmetrical transformation of a circle with respect to an axis placement which is the axis of the symmetry.

gp_Circ gp_Circ::Mirrored ( const gp_Ax2 & A2 ) const

Performs the symmetrical transformation of a circle with respect to a plane. The axis placement A2 locates the plane of the of the symmetry : (Location, XDirection, YDirection).

const gp_Ax2& gp_Circ::Position ( ) const

Returns the position of the circle. It is the local coordinate system of the circle.

Standard_Real gp_Circ::Radius ( ) const

Returns the radius of this circle.

void gp_Circ::Rotate	(	const gp_Ax1 &	A1,
		const Standard_Real	Ang
	)

gp_Circ gp_Circ::Rotated	(	const gp_Ax1 &	A1,
		const Standard_Real	Ang
	)		const

Rotates a circle. A1 is the axis of the rotation. Ang is the angular value of the rotation in radians.

void gp_Circ::Scale	(	const gp_Pnt &	P,
		const Standard_Real	S
	)

gp_Circ gp_Circ::Scaled	(	const gp_Pnt &	P,
		const Standard_Real	S
	)		const

Scales a circle. S is the scaling value. Warnings : If S is negative the radius stay positive but the "XAxis" and the "YAxis" are reversed as for an ellipse.

void gp_Circ::SetAxis ( const gp_Ax1 & A1 )

Changes the main axis of the circle. It is the axis perpendicular to the plane of the circle. Raises ConstructionError if the direction of A1 is parallel to the "XAxis" of the circle.

void gp_Circ::SetLocation ( const gp_Pnt & P )

Changes the "Location" point (center) of the circle.

void gp_Circ::SetPosition ( const gp_Ax2 & A2 )

Changes the position of the circle.

void gp_Circ::SetRadius ( const Standard_Real Radius )

Modifies the radius of this circle. Warning. This class does not prevent the creation of a circle where Radius is null. Exceptions Standard_ConstructionError if Radius is negative.

Standard_Real gp_Circ::SquareDistance ( const gp_Pnt & P ) const

Computes the square distance between <me> and the point P.

void gp_Circ::Transform ( const gp_Trsf & T )

gp_Circ gp_Circ::Transformed ( const gp_Trsf & T ) const

Transforms a circle with the transformation T from class Trsf.

void gp_Circ::Translate ( const gp_Vec & V )

void gp_Circ::Translate	(	const gp_Pnt &	P1,
		const gp_Pnt &	P2
	)

gp_Circ gp_Circ::Translated ( const gp_Vec & V ) const

Translates a circle in the direction of the vector V. The magnitude of the translation is the vector's magnitude.

gp_Circ gp_Circ::Translated	(	const gp_Pnt &	P1,
		const gp_Pnt &	P2
	)		const

Translates a circle from the point P1 to the point P2.

gp_Ax1 gp_Circ::XAxis ( ) const

Returns the "XAxis" of the circle. This axis is perpendicular to the axis of the conic. This axis and the "Yaxis" define the plane of the conic.

gp_Ax1 gp_Circ::YAxis ( ) const

Returns the "YAxis" of the circle. This axis and the "Xaxis" define the plane of the conic. The "YAxis" is perpendicular to the "Xaxis".

The documentation for this class was generated from the following file:

gp_Circ.hxx

gp_Circ Class Reference

Public Member Functions

Detailed Description

Constructor & Destructor Documentation

Member Function Documentation