BRepApprox_TheComputeLineBezierOfApprox Class Reference

#include <BRepApprox_TheComputeLineBezierOfApprox.hxx>

Public Member Functions
	BRepApprox_TheComputeLineBezierOfApprox (const BRepApprox_TheMultiLineOfApprox &Line, const Standard_Integer degreemin=4, const Standard_Integer degreemax=8, const Standard_Real Tolerance3d=1.0e-3, const Standard_Real Tolerance2d=1.0e-6, const Standard_Integer NbIterations=5, const Standard_Boolean cutting=Standard_True, const Approx_ParametrizationType parametrization=Approx_ChordLength, const Standard_Boolean Squares=Standard_False)
	The MultiLine <Line> will be approximated until tolerances will be reached. The approximation will be done from degreemin to degreemax with a cutting if the corresponding boolean is True. If <Squares> is True, the computation will be done with no iteration at all. More...
	BRepApprox_TheComputeLineBezierOfApprox (const BRepApprox_TheMultiLineOfApprox &Line, const math_Vector &Parameters, const Standard_Integer degreemin=4, const Standard_Integer degreemax=8, const Standard_Real Tolerance3d=1.0e-03, const Standard_Real Tolerance2d=1.0e-06, const Standard_Integer NbIterations=5, const Standard_Boolean cutting=Standard_True, const Standard_Boolean Squares=Standard_False)
	The MultiLine <Line> will be approximated until tolerances will be reached. The approximation will be done from degreemin to degreemax with a cutting if the corresponding boolean is True. If <Squares> is True, the computation will be done with no iteration at all. More...
	BRepApprox_TheComputeLineBezierOfApprox (const math_Vector &Parameters, const Standard_Integer degreemin=4, const Standard_Integer degreemax=8, const Standard_Real Tolerance3d=1.0e-03, const Standard_Real Tolerance2d=1.0e-06, const Standard_Integer NbIterations=5, const Standard_Boolean cutting=Standard_True, const Standard_Boolean Squares=Standard_False)
	Initializes the fields of the algorithm. More...
	BRepApprox_TheComputeLineBezierOfApprox (const Standard_Integer degreemin=4, const Standard_Integer degreemax=8, const Standard_Real Tolerance3d=1.0e-03, const Standard_Real Tolerance2d=1.0e-06, const Standard_Integer NbIterations=5, const Standard_Boolean cutting=Standard_True, const Approx_ParametrizationType parametrization=Approx_ChordLength, const Standard_Boolean Squares=Standard_False)
	Initializes the fields of the algorithm. More...
void	Init (const Standard_Integer degreemin=4, const Standard_Integer degreemax=8, const Standard_Real Tolerance3d=1.0e-03, const Standard_Real Tolerance2d=1.0e-06, const Standard_Integer NbIterations=5, const Standard_Boolean cutting=Standard_True, const Approx_ParametrizationType parametrization=Approx_ChordLength, const Standard_Boolean Squares=Standard_False)
	Initializes the fields of the algorithm. More...
void	Perform (const BRepApprox_TheMultiLineOfApprox &Line)
	runs the algorithm after having initialized the fields. More...
void	SetDegrees (const Standard_Integer degreemin, const Standard_Integer degreemax)
	changes the degrees of the approximation. More...
void	SetTolerances (const Standard_Real Tolerance3d, const Standard_Real Tolerance2d)
	Changes the tolerances of the approximation. More...
void	SetConstraints (const AppParCurves_Constraint firstC, const AppParCurves_Constraint lastC)
	changes the first and the last constraint points. More...
Standard_Boolean	IsAllApproximated () const
	returns False if at a moment of the approximation, the status NoApproximation has been sent by the user when more points were needed. More...
Standard_Boolean	IsToleranceReached () const
	returns False if the status NoPointsAdded has been sent. More...
void	Error (const Standard_Integer Index, Standard_Real &tol3d, Standard_Real &tol2d) const
	returns the tolerances 2d and 3d of the <Index> MultiCurve. More...
Standard_Integer	NbMultiCurves () const
	Returns the number of MultiCurve doing the approximation of the MultiLine. More...
const AppParCurves_MultiCurve &	Value (const Standard_Integer Index=1) const
	returns the result of the approximation. More...
AppParCurves_MultiCurve &	ChangeValue (const Standard_Integer Index=1)
	returns the result of the approximation. More...
const AppParCurves_MultiBSpCurve &	SplineValue ()
	returns the result of the approximation. More...
Approx_ParametrizationType	Parametrization () const
	returns the type of parametrization More...
const TColStd_Array1OfReal &	Parameters (const Standard_Integer Index=1) const
	returns the new parameters of the approximation corresponding to the points of the multicurve <Index>. More...

Constructor & Destructor Documentation

BRepApprox_TheComputeLineBezierOfApprox::BRepApprox_TheComputeLineBezierOfApprox	(	const BRepApprox_TheMultiLineOfApprox &	Line,
		const Standard_Integer	degreemin = 4,
		const Standard_Integer	degreemax = 8,
		const Standard_Real	Tolerance3d = 1.0e-3,
		const Standard_Real	Tolerance2d = 1.0e-6,
		const Standard_Integer	NbIterations = 5,
		const Standard_Boolean	cutting = Standard_True,
		const Approx_ParametrizationType	parametrization = Approx_ChordLength,
		const Standard_Boolean	Squares = Standard_False
	)

The MultiLine <Line> will be approximated until tolerances will be reached. The approximation will be done from degreemin to degreemax with a cutting if the corresponding boolean is True. If <Squares> is True, the computation will be done with no iteration at all.

BRepApprox_TheComputeLineBezierOfApprox::BRepApprox_TheComputeLineBezierOfApprox	(	const BRepApprox_TheMultiLineOfApprox &	Line,
		const math_Vector &	Parameters,
		const Standard_Integer	degreemin = 4,
		const Standard_Integer	degreemax = 8,
		const Standard_Real	Tolerance3d = 1.0e-03,
		const Standard_Real	Tolerance2d = 1.0e-06,
		const Standard_Integer	NbIterations = 5,
		const Standard_Boolean	cutting = Standard_True,
		const Standard_Boolean	Squares = Standard_False
	)

The MultiLine <Line> will be approximated until tolerances will be reached. The approximation will be done from degreemin to degreemax with a cutting if the corresponding boolean is True. If <Squares> is True, the computation will be done with no iteration at all.

BRepApprox_TheComputeLineBezierOfApprox::BRepApprox_TheComputeLineBezierOfApprox	(	const math_Vector &	Parameters,
		const Standard_Integer	degreemin = 4,
		const Standard_Integer	degreemax = 8,
		const Standard_Real	Tolerance3d = 1.0e-03,
		const Standard_Real	Tolerance2d = 1.0e-06,
		const Standard_Integer	NbIterations = 5,
		const Standard_Boolean	cutting = Standard_True,
		const Standard_Boolean	Squares = Standard_False
	)

Initializes the fields of the algorithm.

BRepApprox_TheComputeLineBezierOfApprox::BRepApprox_TheComputeLineBezierOfApprox	(	const Standard_Integer	degreemin = 4,
		const Standard_Integer	degreemax = 8,
		const Standard_Real	Tolerance3d = 1.0e-03,
		const Standard_Real	Tolerance2d = 1.0e-06,
		const Standard_Integer	NbIterations = 5,
		const Standard_Boolean	cutting = Standard_True,
		const Approx_ParametrizationType	parametrization = Approx_ChordLength,
		const Standard_Boolean	Squares = Standard_False
	)

Initializes the fields of the algorithm.

Member Function Documentation

AppParCurves_MultiCurve& BRepApprox_TheComputeLineBezierOfApprox::ChangeValue

(

const Standard_Integer

Index = 1

)

returns the result of the approximation.

void BRepApprox_TheComputeLineBezierOfApprox::Error	(	const Standard_Integer	Index,
		Standard_Real &	tol3d,
		Standard_Real &	tol2d
	)		const

returns the tolerances 2d and 3d of the <Index> MultiCurve.

void BRepApprox_TheComputeLineBezierOfApprox::Init	(	const Standard_Integer	degreemin = 4,
		const Standard_Integer	degreemax = 8,
		const Standard_Real	Tolerance3d = 1.0e-03,
		const Standard_Real	Tolerance2d = 1.0e-06,
		const Standard_Integer	NbIterations = 5,
		const Standard_Boolean	cutting = Standard_True,
		const Approx_ParametrizationType	parametrization = Approx_ChordLength,
		const Standard_Boolean	Squares = Standard_False
	)

Initializes the fields of the algorithm.

Standard_Boolean BRepApprox_TheComputeLineBezierOfApprox::IsAllApproximated

(

)

const

returns False if at a moment of the approximation, the status NoApproximation has been sent by the user when more points were needed.

Standard_Boolean BRepApprox_TheComputeLineBezierOfApprox::IsToleranceReached

(

)

const

returns False if the status NoPointsAdded has been sent.

Standard_Integer BRepApprox_TheComputeLineBezierOfApprox::NbMultiCurves

(

)

const

Returns the number of MultiCurve doing the approximation of the MultiLine.

const TColStd_Array1OfReal& BRepApprox_TheComputeLineBezierOfApprox::Parameters

(

const Standard_Integer

Index = 1

)

const

returns the new parameters of the approximation corresponding to the points of the multicurve <Index>.

Approx_ParametrizationType BRepApprox_TheComputeLineBezierOfApprox::Parametrization

(

)

const

returns the type of parametrization

void BRepApprox_TheComputeLineBezierOfApprox::Perform

(

const BRepApprox_TheMultiLineOfApprox &

Line

)

runs the algorithm after having initialized the fields.

void BRepApprox_TheComputeLineBezierOfApprox::SetConstraints	(	const AppParCurves_Constraint	firstC,
		const AppParCurves_Constraint	lastC
	)

changes the first and the last constraint points.

void BRepApprox_TheComputeLineBezierOfApprox::SetDegrees	(	const Standard_Integer	degreemin,
		const Standard_Integer	degreemax
	)

changes the degrees of the approximation.

void BRepApprox_TheComputeLineBezierOfApprox::SetTolerances	(	const Standard_Real	Tolerance3d,
		const Standard_Real	Tolerance2d
	)

Changes the tolerances of the approximation.

const AppParCurves_MultiBSpCurve& BRepApprox_TheComputeLineBezierOfApprox::SplineValue

(

)

returns the result of the approximation.

const AppParCurves_MultiCurve& BRepApprox_TheComputeLineBezierOfApprox::Value

(

const Standard_Integer

Index = 1

)

const

returns the result of the approximation.

---

The documentation for this class was generated from the following file:

• BRepApprox_TheComputeLineBezierOfApprox.hxx