Defines a modification of the geometry by a GTrsf from gp. All methods return True and transform the geometry. More...
#include <BRepTools_GTrsfModification.hxx>
Public Member Functions | |
| BRepTools_GTrsfModification (const gp_GTrsf &T) | |
| gp_GTrsf & | GTrsf () |
| Gives an access on the GTrsf. More... | |
| Standard_Boolean | NewSurface (const TopoDS_Face &F, Handle< Geom_Surface > &S, TopLoc_Location &L, Standard_Real &Tol, Standard_Boolean &RevWires, Standard_Boolean &RevFace) override |
| Returns Standard_True if the face <F> has been modified. In this case, <S> is the new geometric support of the face, <L> the new location,<Tol> the new tolerance.<RevWires> has to be set to Standard_True when the modification reverses the normal of the surface.(the wires have to be reversed). <RevFace> has to be set to Standard_True if the orientation of the modified face changes in the shells which contain it. – Here, <RevFace> will return Standard_True if the – gp_Trsf is negative. More... | |
| Standard_Boolean | NewCurve (const TopoDS_Edge &E, Handle< Geom_Curve > &C, TopLoc_Location &L, Standard_Real &Tol) override |
Returns Standard_True if the edge <E> has been modified. In this case, is the new geometric support of the edge, <L> the new location, <Tol> the new tolerance. Otherwise, returns Standard_False, and More... | |
| Standard_Boolean | NewPoint (const TopoDS_Vertex &V, gp_Pnt &P, Standard_Real &Tol) override |
| Returns Standard_True if the vertex <V> has been modified. In this case,. More... | |
| Standard_Boolean | NewCurve2d (const TopoDS_Edge &E, const TopoDS_Face &F, const TopoDS_Edge &NewE, const TopoDS_Face &NewF, Handle< Geom2d_Curve > &C, Standard_Real &Tol) override |
Returns Standard_True if the edge <E> has a new curve on surface on the face <F>.In this case, is the new geometric support of the edge, <L> the new location, <Tol> the new tolerance. Otherwise, returns Standard_False, and More... | |
| Standard_Boolean | NewParameter (const TopoDS_Vertex &V, const TopoDS_Edge &E, Standard_Real &P, Standard_Real &Tol) override |
| Returns Standard_True if the Vertex <V> has a new parameter on the edge <E>. In this case,. More... | |
| GeomAbs_Shape | Continuity (const TopoDS_Edge &E, const TopoDS_Face &F1, const TopoDS_Face &F2, const TopoDS_Edge &NewE, const TopoDS_Face &NewF1, const TopoDS_Face &NewF2) override |
| Returns the continuity of <NewE> between <NewF1> and <NewF2>. More... | |
 Public Member Functions inherited from BRepTools_Modification | |
| virtual Standard_Boolean | NewTriangulation (const TopoDS_Face &F, Handle< Poly_Triangulation > &T) |
| Returns true if the face has been modified according to changed triangulation. If the face has been modified: More... | |
| virtual Standard_Boolean | NewPolygon (const TopoDS_Edge &E, Handle< Poly_Polygon3D > &P) |
| Returns true if the edge has been modified according to changed polygon. If the edge has been modified: More... | |
| virtual Standard_Boolean | NewPolygonOnTriangulation (const TopoDS_Edge &E, const TopoDS_Face &F, Handle< Poly_PolygonOnTriangulation > &P) |
| Returns true if the edge has been modified according to changed polygon on triangulation. If the edge has been modified: More... | |
| Public Member Functions inherited from MMgt_TShared | |
| virtual void | Delete () const override |
| Memory deallocator for transient classes. More... | |
| Public Member Functions inherited from Standard_Transient | |
| Standard_Transient () | |
| Empty constructor. More... | |
| Standard_Transient (const Standard_Transient &) | |
| Copy constructor – does nothing. More... | |
| Standard_Transient & | operator= (const Standard_Transient &) |
| Assignment operator, needed to avoid copying reference counter. More... | |
| virtual | ~Standard_Transient () |
| Destructor must be virtual. More... | |
| virtual const opencascade::handle< Standard_Type > & | DynamicType () const |
| Returns a type descriptor about this object. More... | |
| Standard_Boolean | IsInstance (const opencascade::handle< Standard_Type > &theType) const |
| Returns a true value if this is an instance of Type. More... | |
| Standard_Boolean | IsInstance (const Standard_CString theTypeName) const |
| Returns a true value if this is an instance of TypeName. More... | |
| Standard_Boolean | IsKind (const opencascade::handle< Standard_Type > &theType) const |
| Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More... | |
| Standard_Boolean | IsKind (const Standard_CString theTypeName) const |
| Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More... | |
| Standard_Transient * | This () const |
| Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero. More... | |
| Standard_Integer | GetRefCount () const |
| Get the reference counter of this object. More... | |
| void | IncrementRefCounter () const |
| Increments the reference counter of this object. More... | |
| Standard_Integer | DecrementRefCounter () const |
| Decrements the reference counter of this object; returns the decremented value. More... | |
Additional Inherited Members | |
| Public Types inherited from Standard_Transient | |
| typedef void | base_type |
| Returns a type descriptor about this object. More... | |
| Static Public Member Functions inherited from Standard_Transient | |
| static const char * | get_type_name () |
| Returns a type descriptor about this object. More... | |
| static const opencascade::handle< Standard_Type > & | get_type_descriptor () |
| Returns type descriptor of Standard_Transient class. More... | |
Detailed Description
Defines a modification of the geometry by a GTrsf from gp. All methods return True and transform the geometry.
Constructor & Destructor Documentation
| BRepTools_GTrsfModification::BRepTools_GTrsfModification | ( | const gp_GTrsf & | T | ) |
Member Function Documentation
|
overridevirtual |
Returns the continuity of <NewE> between <NewF1> and <NewF2>.
<NewE> is the new edge created from <E>. <NewF1> (resp. <NewF2>) is the new face created from <F1> (resp. <F2>).
Implements BRepTools_Modification.
| gp_GTrsf& BRepTools_GTrsfModification::GTrsf | ( | ) |
Gives an access on the GTrsf.
|
overridevirtual |
Returns Standard_True if the edge <E> has been modified. In this case, is the new geometric support of the edge, <L> the new location, <Tol> the new tolerance. Otherwise, returns Standard_False, and , <L>, <Tol> are not significant.
Implements BRepTools_Modification.
|
overridevirtual |
Returns Standard_True if the edge <E> has a new curve on surface on the face <F>.In this case, is the new geometric support of the edge, <L> the new location, <Tol> the new tolerance. Otherwise, returns Standard_False, and , <L>, <Tol> are not significant.
Implements BRepTools_Modification.
|
overridevirtual |
Returns Standard_True if the Vertex <V> has a new parameter on the edge <E>. In this case,.
is the parameter, <Tol> the new tolerance. Otherwise, returns Standard_False, and
, <Tol> are not significant.
Implements BRepTools_Modification.
|
overridevirtual |
Returns Standard_True if the vertex <V> has been modified. In this case,.
is the new geometric support of the vertex, <Tol> the new tolerance. Otherwise, returns Standard_False, and
, <Tol> are not significant.
Implements BRepTools_Modification.
|
overridevirtual |
Returns Standard_True if the face <F> has been modified. In this case, <S> is the new geometric support of the face, <L> the new location,<Tol> the new tolerance.<RevWires> has to be set to Standard_True when the modification reverses the normal of the surface.(the wires have to be reversed). <RevFace> has to be set to Standard_True if the orientation of the modified face changes in the shells which contain it. – Here, <RevFace> will return Standard_True if the – gp_Trsf is negative.
Implements BRepTools_Modification.
The documentation for this class was generated from the following file:
