to remove Hidden lines on Shapes with Triangulations. A framework to compute the shape as seen in a projection plane. This is done by calculating the visible and the hidden parts of the shape. HLRBRep_PolyAlgo works with three types of entity: More...

#include <HLRBRep_PolyAlgo.hxx>

Inheritance diagram for HLRBRep_PolyAlgo:

[legend]

Public Member Functions
	HLRBRep_PolyAlgo ()
	Constructs an empty framework for the calculation of the visible and hidden lines of a shape in a projection. Use the functions: More...

	HLRBRep_PolyAlgo (const Handle< HLRBRep_PolyAlgo > &A)

	HLRBRep_PolyAlgo (const TopoDS_Shape &S)

Standard_Integer	NbShapes () const

TopoDS_Shape &	Shape (const Standard_Integer I)

void	Remove (const Standard_Integer I)
	remove the Shape of Index . More...

Standard_Integer	Index (const TopoDS_Shape &S) const
	return the index of the Shape <S> and return 0 if the Shape <S> is not found. More...

void	Load (const TopoDS_Shape &S)
	Loads the shape S into this framework. Warning S must have already been triangulated. More...

Handle< HLRAlgo_PolyAlgo >	Algo () const

const HLRAlgo_Projector &	Projector () const
	Sets the parameters of the view for this framework. These parameters are defined by an HLRAlgo_Projector object, which is returned by the Projector function on a Prs3d_Projector object. More...

void	Projector (const HLRAlgo_Projector &P)

Standard_Real	Angle () const

void	Angle (const Standard_Real Ang)

Standard_Real	TolAngular () const

void	TolAngular (const Standard_Real Tol)

Standard_Real	TolCoef () const

void	TolCoef (const Standard_Real Tol)

void	Update ()
	Launches calculation of outlines of the shape visualized by this framework. Used after setting the point of view and defining the shape or shapes to be visualized. More...

void	InitHide ()

Standard_Boolean	MoreHide () const

void	NextHide ()

HLRAlgo_BiPoint::PointsT &	Hide (HLRAlgo_EdgeStatus &status, TopoDS_Shape &S, Standard_Boolean &reg1, Standard_Boolean &regn, Standard_Boolean &outl, Standard_Boolean &intl)

void	InitShow ()

Standard_Boolean	MoreShow () const

void	NextShow ()

HLRAlgo_BiPoint::PointsT &	Show (TopoDS_Shape &S, Standard_Boolean &reg1, Standard_Boolean &regn, Standard_Boolean &outl, Standard_Boolean &intl)

TopoDS_Shape	OutLinedShape (const TopoDS_Shape &S) const
	Make a shape with the internal outlines in each face. More...

Standard_Boolean	Debug () const

void	Debug (const Standard_Boolean B)

Public Member Functions inherited from MMgt_TShared
virtual void	Delete () const override
	Memory deallocator for transient classes. More...

Public Member Functions inherited from Standard_Transient
	Standard_Transient ()
	Empty constructor. More...

	Standard_Transient (const Standard_Transient &)
	Copy constructor – does nothing. More...

Standard_Transient &	operator= (const Standard_Transient &)
	Assignment operator, needed to avoid copying reference counter. More...

virtual	~Standard_Transient ()
	Destructor must be virtual. More...

virtual const opencascade::handle< Standard_Type > &	DynamicType () const
	Returns a type descriptor about this object. More...

Standard_Boolean	IsInstance (const opencascade::handle< Standard_Type > &theType) const
	Returns a true value if this is an instance of Type. More...

Standard_Boolean	IsInstance (const Standard_CString theTypeName) const
	Returns a true value if this is an instance of TypeName. More...

Standard_Boolean	IsKind (const opencascade::handle< Standard_Type > &theType) const
	Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...

Standard_Boolean	IsKind (const Standard_CString theTypeName) const
	Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...

Standard_Transient *	This () const
	Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero. More...

Standard_Integer	GetRefCount () const
	Get the reference counter of this object. More...

void	IncrementRefCounter () const
	Increments the reference counter of this object. More...

Standard_Integer	DecrementRefCounter () const
	Decrements the reference counter of this object; returns the decremented value. More...

Additional Inherited Members
Public Types inherited from Standard_Transient
typedef void	base_type
	Returns a type descriptor about this object. More...

Static Public Member Functions inherited from Standard_Transient
static const char *	get_type_name ()
	Returns a type descriptor about this object. More...

static const opencascade::handle< Standard_Type > &	get_type_descriptor ()
	Returns type descriptor of Standard_Transient class. More...

Detailed Description

to remove Hidden lines on Shapes with Triangulations. A framework to compute the shape as seen in a projection plane. This is done by calculating the visible and the hidden parts of the shape. HLRBRep_PolyAlgo works with three types of entity:

shapes to be visualized (these shapes must have already been triangulated.)
edges in these shapes (these edges are defined as polygonal lines on the triangulation of the shape, and are the basic entities which will be visualized or hidden), and
triangles in these shapes which hide the edges. HLRBRep_PolyAlgo is based on the principle of comparing each edge of the shape to be visualized with each of the triangles produced by the triangulation of the shape, and calculating the visible and the hidden parts of each edge. For a given projection, HLRBRep_PolyAlgo calculates a set of lines characteristic of the object being represented. It is also used in conjunction with the HLRBRep_PolyHLRToShape extraction utilities, which reconstruct a new, simplified shape from a selection of calculation results. This new shape is made up of edges, which represent the shape visualized in the projection. HLRBRep_PolyAlgo works with a polyhedral simplification of the shape whereas HLRBRep_Algo takes the shape itself into account. When you use HLRBRep_Algo, you obtain an exact result, whereas, when you use HLRBRep_PolyAlgo, you reduce computation time but obtain polygonal segments. An HLRBRep_PolyAlgo object provides a framework for:
defining the point of view
identifying the shape or shapes to be visualized
calculating the outlines
calculating the visible and hidden lines of the shape. Warning
Superimposed lines are not eliminated by this algorithm.
There must be no unfinished objects inside the shape you wish to visualize.
Points are not treated.
Note that this is not the sort of algorithm used in generating shading, which calculates the visible and hidden parts of each face in a shape to be visualized by comparing each face in the shape with every other face in the same shape.

Constructor & Destructor Documentation

HLRBRep_PolyAlgo::HLRBRep_PolyAlgo ( )

Constructs an empty framework for the calculation of the visible and hidden lines of a shape in a projection. Use the functions:

Projector to define the point of view
Load to select the shape or shapes to be visualized
Update to compute the visible and hidden lines of the shape. Warning The shape or shapes to be visualized must have already been triangulated.

HLRBRep_PolyAlgo::HLRBRep_PolyAlgo ( const Handle< HLRBRep_PolyAlgo > & A )

HLRBRep_PolyAlgo::HLRBRep_PolyAlgo ( const TopoDS_Shape & S )

Member Function Documentation

Handle< HLRAlgo_PolyAlgo > HLRBRep_PolyAlgo::Algo ( ) const

Standard_Real HLRBRep_PolyAlgo::Angle ( ) const

void HLRBRep_PolyAlgo::Angle ( const Standard_Real Ang )

Standard_Boolean HLRBRep_PolyAlgo::Debug ( ) const

void HLRBRep_PolyAlgo::Debug ( const Standard_Boolean B )

HLRAlgo_BiPoint::PointsT& HLRBRep_PolyAlgo::Hide	(	HLRAlgo_EdgeStatus &	status,
		TopoDS_Shape &	S,
		Standard_Boolean &	reg1,
		Standard_Boolean &	regn,
		Standard_Boolean &	outl,
		Standard_Boolean &	intl
	)

Standard_Integer HLRBRep_PolyAlgo::Index ( const TopoDS_Shape & S ) const

return the index of the Shape <S> and return 0 if the Shape <S> is not found.

void HLRBRep_PolyAlgo::InitHide ( )

void HLRBRep_PolyAlgo::InitShow ( )

void HLRBRep_PolyAlgo::Load ( const TopoDS_Shape & S )

Loads the shape S into this framework. Warning S must have already been triangulated.

Standard_Boolean HLRBRep_PolyAlgo::MoreHide ( ) const

Standard_Boolean HLRBRep_PolyAlgo::MoreShow ( ) const

Standard_Integer HLRBRep_PolyAlgo::NbShapes ( ) const

void HLRBRep_PolyAlgo::NextHide ( )

void HLRBRep_PolyAlgo::NextShow ( )

TopoDS_Shape HLRBRep_PolyAlgo::OutLinedShape ( const TopoDS_Shape & S ) const

Make a shape with the internal outlines in each face.

const HLRAlgo_Projector& HLRBRep_PolyAlgo::Projector ( ) const

Sets the parameters of the view for this framework. These parameters are defined by an HLRAlgo_Projector object, which is returned by the Projector function on a Prs3d_Projector object.

void HLRBRep_PolyAlgo::Projector ( const HLRAlgo_Projector & P )

void HLRBRep_PolyAlgo::Remove ( const Standard_Integer I )

remove the Shape of Index .

TopoDS_Shape& HLRBRep_PolyAlgo::Shape ( const Standard_Integer I )

HLRAlgo_BiPoint::PointsT& HLRBRep_PolyAlgo::Show	(	TopoDS_Shape &	S,
		Standard_Boolean &	reg1,
		Standard_Boolean &	regn,
		Standard_Boolean &	outl,
		Standard_Boolean &	intl
	)

Standard_Real HLRBRep_PolyAlgo::TolAngular ( ) const

void HLRBRep_PolyAlgo::TolAngular ( const Standard_Real Tol )

Standard_Real HLRBRep_PolyAlgo::TolCoef ( ) const

void HLRBRep_PolyAlgo::TolCoef ( const Standard_Real Tol )

void HLRBRep_PolyAlgo::Update ( )

Launches calculation of outlines of the shape visualized by this framework. Used after setting the point of view and defining the shape or shapes to be visualized.

The documentation for this class was generated from the following file:

HLRBRep_PolyAlgo.hxx

HLRBRep_PolyAlgo Class Reference

Public Member Functions

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

Member Function Documentation