Provides data specific to chamfers distances on each of faces. More...

#include <ChFiDS_ChamfSpine.hxx>

Inheritance diagram for ChFiDS_ChamfSpine:

Public Member Functions
	ChFiDS_ChamfSpine ()

	ChFiDS_ChamfSpine (const Standard_Real Tol)

void	SetDist (const Standard_Real Dis)

void	GetDist (Standard_Real &Dis) const

void	SetDists (const Standard_Real Dis1, const Standard_Real Dis2)

void	Dists (Standard_Real &Dis1, Standard_Real &Dis2) const

void	GetDistAngle (Standard_Real &Dis, Standard_Real &Angle, Standard_Boolean &DisOnF1) const

void	SetDistAngle (const Standard_Real Dis, const Standard_Real Angle, const Standard_Boolean DisOnF1)

ChFiDS_ChamfMethod	IsChamfer () const
	Return the method of chamfers used. More...

Public Member Functions inherited from ChFiDS_Spine
	ChFiDS_Spine ()

	ChFiDS_Spine (const Standard_Real Tol)

void	SetEdges (const TopoDS_Edge &E)
	store edges composing the guideline More...

void	PutInFirst (const TopoDS_Edge &E)
	store the edge at the first position before all others More...

Standard_Integer	NbEdges () const

const TopoDS_Edge &	Edges (const Standard_Integer I) const

void	SetFirstStatus (const ChFiDS_State S)
	stores if the start of a set of edges starts on a section of free border or forms a closed contour More...

void	SetLastStatus (const ChFiDS_State S)
	stores if the end of a set of edges starts on a section of free border or forms a closed contour More...

virtual void	AppendElSpine (const Handle< ChFiDS_HElSpine > &Els)

Handle< ChFiDS_HElSpine >	ElSpine (const Standard_Integer IE) const

Handle< ChFiDS_HElSpine >	ElSpine (const TopoDS_Edge &E) const

Handle< ChFiDS_HElSpine >	ElSpine (const Standard_Real W) const

ChFiDS_ListOfHElSpine &	ChangeElSpines ()

virtual void	Reset (const Standard_Boolean AllData=Standard_False)

Standard_Boolean	SplitDone () const

void	SplitDone (const Standard_Boolean B)

void	Load ()
	prepare the guideline depending on the edges that are elementary arks (take parameters from a single curvilinear abscissa); to be able to call methods on the geometry (first,last,value,d1,d2) it is necessary to start with preparation otherwise an exception will be raised More...

Standard_Real	Resolution (const Standard_Real R3d) const

Standard_Boolean	IsClosed () const

Standard_Real	FirstParameter () const

Standard_Real	LastParameter () const

void	SetFirstParameter (const Standard_Real Par)

void	SetLastParameter (const Standard_Real Par)

Standard_Real	FirstParameter (const Standard_Integer IndexSpine) const
	gives the total length of all arcs before the number IndexSp More...

Standard_Real	LastParameter (const Standard_Integer IndexSpine) const
	gives the total length till the ark with number IndexSpine (inclus) More...

Standard_Real	Length (const Standard_Integer IndexSpine) const
	gives the length of ark with number IndexSp More...

Standard_Boolean	IsPeriodic () const

Standard_Real	Period () const

Standard_Real	Absc (const Standard_Real U)

Standard_Real	Absc (const Standard_Real U, const Standard_Integer I)

void	Parameter (const Standard_Real AbsC, Standard_Real &U, const Standard_Boolean Oriented=Standard_True)

void	Parameter (const Standard_Integer Index, const Standard_Real AbsC, Standard_Real &U, const Standard_Boolean Oriented=Standard_True)

gp_Pnt	Value (const Standard_Real AbsC)

void	D0 (const Standard_Real AbsC, gp_Pnt &P)

void	D1 (const Standard_Real AbsC, gp_Pnt &P, gp_Vec &V1)

void	D2 (const Standard_Real AbsC, gp_Pnt &P, gp_Vec &V1, gp_Vec &V2)

void	SetCurrent (const Standard_Integer Index)

const BRepAdaptor_Curve &	CurrentElementarySpine (const Standard_Integer Index)
	sets the current curve and returns it More...

Standard_Integer	CurrentIndexOfElementarySpine () const

GeomAbs_CurveType	GetType () const

gp_Lin	Line () const

gp_Circ	Circle () const

ChFiDS_State	FirstStatus () const
	returns if the set of edges starts on a free boundary or if the first vertex is a breakpoint or if the set is closed More...

ChFiDS_State	LastStatus () const
	returns the state at the end of the set More...

ChFiDS_State	Status (const Standard_Boolean IsFirst) const

void	SetStatus (const ChFiDS_State S, const Standard_Boolean IsFirst)

Standard_Boolean	IsTangencyExtremity (const Standard_Boolean IsFirst) const
	returns if the set of edges starts (or end) on Tangency point. More...

void	SetTangencyExtremity (const Standard_Boolean IsTangency, const Standard_Boolean IsFirst)

Standard_Real	Absc (const TopoDS_Vertex &V) const

TopoDS_Vertex	FirstVertex () const

TopoDS_Vertex	LastVertex () const

void	SetFirstTgt (const Standard_Real W)

void	SetLastTgt (const Standard_Real W)

Standard_Boolean	HasFirstTgt () const

Standard_Boolean	HasLastTgt () const

void	SetReference (const Standard_Real W)
	set a parameter reference for the approx. More...

void	SetReference (const Standard_Integer I)
	set a parameter reference for the approx, at the middle of edge I. More...

Standard_Integer	Index (const Standard_Real W, const Standard_Boolean Forward=Standard_True) const

Standard_Integer	Index (const TopoDS_Edge &E) const

void	UnsetReference ()

void	SetErrorStatus (const ChFiDS_ErrorStatus state)

ChFiDS_ErrorStatus	ErrorStatus () const

Public Member Functions inherited from Standard_Transient
	Standard_Transient ()
	Empty constructor. More...

	Standard_Transient (const Standard_Transient &)
	Copy constructor – does nothing. More...

Standard_Transient &	operator= (const Standard_Transient &)
	Assignment operator, needed to avoid copying reference counter. More...

virtual	~Standard_Transient ()
	Destructor must be virtual. More...

virtual void	Delete () const
	Memory deallocator for transient classes. More...

virtual const opencascade::handle< Standard_Type > &	DynamicType () const
	Returns a type descriptor about this object. More...

Standard_Boolean	IsInstance (const opencascade::handle< Standard_Type > &theType) const
	Returns a true value if this is an instance of Type. More...

Standard_Boolean	IsInstance (const Standard_CString theTypeName) const
	Returns a true value if this is an instance of TypeName. More...

Standard_Boolean	IsKind (const opencascade::handle< Standard_Type > &theType) const
	Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...

Standard_Boolean	IsKind (const Standard_CString theTypeName) const
	Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...

Standard_Transient *	This () const
	Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero. More...

Standard_Integer	GetRefCount () const
	Get the reference counter of this object. More...

void	IncrementRefCounter () const
	Increments the reference counter of this object. More...

Standard_Integer	DecrementRefCounter () const
	Decrements the reference counter of this object; returns the decremented value. More...

Additional Inherited Members
Public Types inherited from Standard_Transient
typedef void	base_type
	Returns a type descriptor about this object. More...

Static Public Member Functions inherited from Standard_Transient
static const char *	get_type_name ()
	Returns a type descriptor about this object. More...

static const opencascade::handle< Standard_Type > &	get_type_descriptor ()
	Returns type descriptor of Standard_Transient class. More...

Protected Attributes inherited from ChFiDS_Spine
Standard_Boolean	splitdone

ChFiDS_ListOfHElSpine	elspines

Detailed Description

Provides data specific to chamfers distances on each of faces.

Constructor & Destructor Documentation

◆ ChFiDS_ChamfSpine() [1/2]

ChFiDS_ChamfSpine::ChFiDS_ChamfSpine ( )

◆ ChFiDS_ChamfSpine() [2/2]

ChFiDS_ChamfSpine::ChFiDS_ChamfSpine ( const Standard_Real Tol )

Member Function Documentation

◆ Dists()

void ChFiDS_ChamfSpine::Dists	(	Standard_Real &	Dis1,
		Standard_Real &	Dis2
	)		const

◆ GetDist()

void ChFiDS_ChamfSpine::GetDist ( Standard_Real & Dis ) const

◆ GetDistAngle()

void ChFiDS_ChamfSpine::GetDistAngle	(	Standard_Real &	Dis,
		Standard_Real &	Angle,
		Standard_Boolean &	DisOnF1
	)		const

◆ IsChamfer()

ChFiDS_ChamfMethod ChFiDS_ChamfSpine::IsChamfer ( ) const

Return the method of chamfers used.

◆ SetDist()

void ChFiDS_ChamfSpine::SetDist ( const Standard_Real Dis )

◆ SetDistAngle()

void ChFiDS_ChamfSpine::SetDistAngle	(	const Standard_Real	Dis,
		const Standard_Real	Angle,
		const Standard_Boolean	DisOnF1
	)

◆ SetDists()

void ChFiDS_ChamfSpine::SetDists	(	const Standard_Real	Dis1,
		const Standard_Real	Dis2
	)

The documentation for this class was generated from the following file:

ChFiDS_ChamfSpine.hxx

ChFiDS_ChamfSpine Class Reference

Public Member Functions

Additional Inherited Members