Tools and Data to filling Surface and Sweep Surfaces. More...

#include <GeomFill.hxx>

Static Public Member Functions
static Handle< Geom_Surface >	Surface (const Handle< Geom_Curve > &Curve1, const Handle< Geom_Curve > &Curve2)
	Builds a ruled surface between the two curves, Curve1 and Curve2. More...

static void	GetCircle (const Convert_ParameterisationType TConv, const gp_Vec &ns1, const gp_Vec &ns2, const gp_Vec &nplan, const gp_Pnt &pt1, const gp_Pnt &pt2, const Standard_Real Rayon, const gp_Pnt &Center, TColgp_Array1OfPnt &Poles, TColStd_Array1OfReal &Weigths)

static Standard_Boolean	GetCircle (const Convert_ParameterisationType TConv, const gp_Vec &ns1, const gp_Vec &ns2, const gp_Vec &dn1w, const gp_Vec &dn2w, const gp_Vec &nplan, const gp_Vec &dnplan, const gp_Pnt &pts1, const gp_Pnt &pts2, const gp_Vec &tang1, const gp_Vec &tang2, const Standard_Real Rayon, const Standard_Real DRayon, const gp_Pnt &Center, const gp_Vec &DCenter, TColgp_Array1OfPnt &Poles, TColgp_Array1OfVec &DPoles, TColStd_Array1OfReal &Weigths, TColStd_Array1OfReal &DWeigths)

static Standard_Boolean	GetCircle (const Convert_ParameterisationType TConv, const gp_Vec &ns1, const gp_Vec &ns2, const gp_Vec &dn1w, const gp_Vec &dn2w, const gp_Vec &d2n1w, const gp_Vec &d2n2w, const gp_Vec &nplan, const gp_Vec &dnplan, const gp_Vec &d2nplan, const gp_Pnt &pts1, const gp_Pnt &pts2, const gp_Vec &tang1, const gp_Vec &tang2, const gp_Vec &Dtang1, const gp_Vec &Dtang2, const Standard_Real Rayon, const Standard_Real DRayon, const Standard_Real D2Rayon, const gp_Pnt &Center, const gp_Vec &DCenter, const gp_Vec &D2Center, TColgp_Array1OfPnt &Poles, TColgp_Array1OfVec &DPoles, TColgp_Array1OfVec &D2Poles, TColStd_Array1OfReal &Weigths, TColStd_Array1OfReal &DWeigths, TColStd_Array1OfReal &D2Weigths)

static void	GetShape (const Standard_Real MaxAng, Standard_Integer &NbPoles, Standard_Integer &NbKnots, Standard_Integer &Degree, Convert_ParameterisationType &TypeConv)

static void	Knots (const Convert_ParameterisationType TypeConv, TColStd_Array1OfReal &TKnots)

static void	Mults (const Convert_ParameterisationType TypeConv, TColStd_Array1OfInteger &TMults)

static void	GetMinimalWeights (const Convert_ParameterisationType TConv, const Standard_Real AngleMin, const Standard_Real AngleMax, TColStd_Array1OfReal &Weigths)

static Standard_Real	GetTolerance (const Convert_ParameterisationType TConv, const Standard_Real AngleMin, const Standard_Real Radius, const Standard_Real AngularTol, const Standard_Real SpatialTol)
	Used by the generical classes to determine Tolerance for approximation. More...

Detailed Description

Tools and Data to filling Surface and Sweep Surfaces.

Member Function Documentation

◆ GetCircle() [1/3]

static void GeomFill::GetCircle	(	const Convert_ParameterisationType	TConv,
		const gp_Vec &	ns1,
		const gp_Vec &	ns2,
		const gp_Vec &	nplan,
		const gp_Pnt &	pt1,
		const gp_Pnt &	pt2,
		const Standard_Real	Rayon,
		const gp_Pnt &	Center,
		TColgp_Array1OfPnt &	Poles,
		TColStd_Array1OfReal &	Weigths
	)

static

◆ GetCircle() [2/3]

static Standard_Boolean GeomFill::GetCircle	(	const Convert_ParameterisationType	TConv,
		const gp_Vec &	ns1,
		const gp_Vec &	ns2,
		const gp_Vec &	dn1w,
		const gp_Vec &	dn2w,
		const gp_Vec &	nplan,
		const gp_Vec &	dnplan,
		const gp_Pnt &	pts1,
		const gp_Pnt &	pts2,
		const gp_Vec &	tang1,
		const gp_Vec &	tang2,
		const Standard_Real	Rayon,
		const Standard_Real	DRayon,
		const gp_Pnt &	Center,
		const gp_Vec &	DCenter,
		TColgp_Array1OfPnt &	Poles,
		TColgp_Array1OfVec &	DPoles,
		TColStd_Array1OfReal &	Weigths,
		TColStd_Array1OfReal &	DWeigths
	)

static

◆ GetCircle() [3/3]

static Standard_Boolean GeomFill::GetCircle	(	const Convert_ParameterisationType	TConv,
		const gp_Vec &	ns1,
		const gp_Vec &	ns2,
		const gp_Vec &	dn1w,
		const gp_Vec &	dn2w,
		const gp_Vec &	d2n1w,
		const gp_Vec &	d2n2w,
		const gp_Vec &	nplan,
		const gp_Vec &	dnplan,
		const gp_Vec &	d2nplan,
		const gp_Pnt &	pts1,
		const gp_Pnt &	pts2,
		const gp_Vec &	tang1,
		const gp_Vec &	tang2,
		const gp_Vec &	Dtang1,
		const gp_Vec &	Dtang2,
		const Standard_Real	Rayon,
		const Standard_Real	DRayon,
		const Standard_Real	D2Rayon,
		const gp_Pnt &	Center,
		const gp_Vec &	DCenter,
		const gp_Vec &	D2Center,
		TColgp_Array1OfPnt &	Poles,
		TColgp_Array1OfVec &	DPoles,
		TColgp_Array1OfVec &	D2Poles,
		TColStd_Array1OfReal &	Weigths,
		TColStd_Array1OfReal &	DWeigths,
		TColStd_Array1OfReal &	D2Weigths
	)

static

◆ GetMinimalWeights()

static void GeomFill::GetMinimalWeights	(	const Convert_ParameterisationType	TConv,
		const Standard_Real	AngleMin,
		const Standard_Real	AngleMax,
		TColStd_Array1OfReal &	Weigths
	)

static

◆ GetShape()

static void GeomFill::GetShape	(	const Standard_Real	MaxAng,
		Standard_Integer &	NbPoles,
		Standard_Integer &	NbKnots,
		Standard_Integer &	Degree,
		Convert_ParameterisationType &	TypeConv
	)

static

◆ GetTolerance()

static Standard_Real GeomFill::GetTolerance	(	const Convert_ParameterisationType	TConv,
		const Standard_Real	AngleMin,
		const Standard_Real	Radius,
		const Standard_Real	AngularTol,
		const Standard_Real	SpatialTol
	)

static

Used by the generical classes to determine Tolerance for approximation.

◆ Knots()

static void GeomFill::Knots	(	const Convert_ParameterisationType	TypeConv,
		TColStd_Array1OfReal &	TKnots
	)

static

◆ Mults()

static void GeomFill::Mults	(	const Convert_ParameterisationType	TypeConv,
		TColStd_Array1OfInteger &	TMults
	)

static

◆ Surface()

static Handle< Geom_Surface > GeomFill::Surface	(	const Handle< Geom_Curve > &	Curve1,
		const Handle< Geom_Curve > &	Curve2
	)

static

Builds a ruled surface between the two curves, Curve1 and Curve2.

The documentation for this class was generated from the following file:

GeomFill.hxx

GeomFill Class Reference

Static Public Member Functions

Detailed Description

Member Function Documentation

◆ GetCircle() [1/3]

◆ GetCircle() [2/3]

◆ GetCircle() [3/3]

◆ GetMinimalWeights()

◆ GetShape()

◆ GetTolerance()

◆ Knots()

◆ Mults()

◆ Surface()