The BRepAlgoAPI_Defeaturing algorithm is the API algorithm intended for removal of the unwanted parts from the shape. The unwanted parts (or features) can be holes, protrusions, gaps, chamfers, fillets etc. The shape itself is not modified, the new shape is built as the result. More...

#include <BRepAlgoAPI_Defeaturing.hxx>

Inheritance diagram for BRepAlgoAPI_Defeaturing:

[legend]

Public Member Functions
Constructors
	BRepAlgoAPI_Defeaturing ()
	Empty constructor. More...

Setting input data for the algorithm
void	SetShape (const TopoDS_Shape &theShape)
	Sets the shape for processing. More...

const TopoDS_Shape &	InputShape () const
	Returns the input shape. More...

void	AddFaceToRemove (const TopoDS_Shape &theFace)
	Adds the features to remove from the input shape. More...

void	AddFacesToRemove (const TopTools_ListOfShape &theFaces)
	Adds the faces to remove from the input shape. More...

const TopTools_ListOfShape &	FacesToRemove () const
	Returns the list of faces which have been requested for removal from the input shape. More...

Performing the operation
virtual void	Build () override
	Performs the operation. More...

History Methods
void	TrackHistory (const Standard_Boolean theFlag)
	Defines whether to track the modification of the shapes or not. More...

Standard_Boolean	HasHistory () const
	Returns whether the history was requested or not. More...

virtual const TopTools_ListOfShape &	Modified (const TopoDS_Shape &theS) override
	Returns the list of shapes modified from the shape <theS> during the operation. More...

virtual const TopTools_ListOfShape &	Generated (const TopoDS_Shape &theS) override
	Returns the list of shapes generated from the shape <theS> during the operation. More...

virtual Standard_Boolean	IsDeleted (const TopoDS_Shape &theS) override
	Returns true if the shape <theS> has been deleted during the operation. It means that the shape has no any trace in the result. Otherwise it returns false. More...

Handle< BRepTools_History >	GetHistory ()
	Returns the History of shapes modifications. More...

Public Member Functions inherited from BRepAlgoAPI_Algo
virtual const TopoDS_Shape &	Shape () override
	Returns a shape built by the shape construction algorithm. Raises exception StdFail_NotDone if the shape was not built. More...

Public Member Functions inherited from BRepBuilderAPI_MakeShape
	operator TopoDS_Shape ()

Public Member Functions inherited from BRepBuilderAPI_Command
virtual	~BRepBuilderAPI_Command ()

virtual Standard_Boolean	IsDone () const

void	Check () const
	Raises NotDone if done is false. More...

Protected Member Functions
Setting the algorithm into default state
virtual void	Clear () override
	Clears all warnings and errors, and any data cached by the algorithm. User defined options are not cleared. More...

Protected Member Functions inherited from BRepAlgoAPI_Algo
	BRepAlgoAPI_Algo ()
	Empty constructor. More...

virtual	~BRepAlgoAPI_Algo ()
	Destructor. More...

	BRepAlgoAPI_Algo (const Handle< NCollection_BaseAllocator > &theAllocator)
	Empty constructor. More...

Protected Member Functions inherited from BRepBuilderAPI_MakeShape
	BRepBuilderAPI_MakeShape ()

Protected Member Functions inherited from BRepBuilderAPI_Command
	BRepBuilderAPI_Command ()
	Set done to False. More...

void	Done ()
	Set done to true. More...

void	NotDone ()
	Set done to false. More...

Protected Member Functions inherited from BOPAlgo_Options
void	UserBreak () const
	Breaks the execution if the break signal is indicated by myProgressIndicator. More...

	BOPAlgo_Options ()
	Empty constructor. More...

	BOPAlgo_Options (const Handle< NCollection_BaseAllocator > &theAllocator)
	Constructor with allocator. More...

virtual	~BOPAlgo_Options ()
	Destructor. More...

const Handle< NCollection_BaseAllocator > &	Allocator () const
	Returns allocator. More...

void	AddError (const Handle< Message_Alert > &theAlert)
	Adds the alert as error (fail) More...

void	AddWarning (const Handle< Message_Alert > &theAlert)
	Adds the alert as warning. More...

Standard_Boolean	HasErrors () const
	Returns true if algorithm has failed. More...

Standard_Boolean	HasError (const Handle< Standard_Type > &theType) const
	Returns true if algorithm has generated error of specified type. More...

Standard_Boolean	HasWarnings () const
	Returns true if algorithm has generated some warning alerts. More...

Standard_Boolean	HasWarning (const Handle< Standard_Type > &theType) const
	Returns true if algorithm has generated warning of specified type. More...

const Handle< Message_Report > &	GetReport () const
	Returns report collecting all errors and warnings. More...

void	DumpErrors (Standard_OStream &theOS) const
	Dumps the error status into the given stream. More...

void	DumpWarnings (Standard_OStream &theOS) const
	Dumps the warning statuses into the given stream. More...

void	ClearWarnings ()
	Clears the warnings of the algorithm. More...

void	SetFuzzyValue (const Standard_Real theFuzz)
	Sets the additional tolerance. More...

Standard_Real	FuzzyValue () const
	Returns the additional tolerance. More...

void	SetProgressIndicator (const Handle< Message_ProgressIndicator > &theObj)
	Set the Progress Indicator object. More...

void	SetRunParallel (const Standard_Boolean theFlag)
	Set the flag of parallel processing if <theFlag> is true the parallel processing is switched on if <theFlag> is false the parallel processing is switched off. More...

Standard_Boolean	RunParallel () const
	Returns the flag of parallel processing. More...

void	SetUseOBB (const Standard_Boolean theUseOBB)
	Enables/Disables the usage of OBB. More...

Standard_Boolean	UseOBB () const
	Returns the flag defining usage of OBB. More...

Protected Attributes
Fields
TopoDS_Shape	myInputShape
	Input shape to remove the features from. More...

TopTools_ListOfShape	myFacesToRemove
	Features to remove from the shape. More...

Standard_Boolean	myTrackHistory
	Defines whether to track the history of shapes modifications or not (true by default) More...

BOPAlgo_RemoveFeatures	myFeatureRemovalTool
	Tool for the features removal. More...

Protected Attributes inherited from BRepBuilderAPI_MakeShape
TopoDS_Shape	myShape

TopTools_ListOfShape	myGenerated

Protected Attributes inherited from BOPAlgo_Options
Handle< NCollection_BaseAllocator >	myAllocator
	Enables/Disables the usage of OBB. More...

Handle< Message_Report >	myReport
	Enables/Disables the usage of OBB. More...

Standard_Boolean	myRunParallel
	Enables/Disables the usage of OBB. More...

Standard_Real	myFuzzyValue
	Enables/Disables the usage of OBB. More...

Handle< Message_ProgressIndicator >	myProgressIndicator
	Enables/Disables the usage of OBB. More...

Standard_Boolean	myUseOBB
	Enables/Disables the usage of OBB. More...

Additional Inherited Members
Static Protected Member Functions inherited from BOPAlgo_Options
static Standard_Boolean	GetParallelMode ()
	Gets the global parallel mode. More...

static void	SetParallelMode (const Standard_Boolean theNewMode)
	Sets the global parallel mode. More...

Detailed Description

The BRepAlgoAPI_Defeaturing algorithm is the API algorithm intended for removal of the unwanted parts from the shape. The unwanted parts (or features) can be holes, protrusions, gaps, chamfers, fillets etc. The shape itself is not modified, the new shape is built as the result.

The actual removal of the features from the shape is performed by the low-level BOPAlgo_RemoveFeatures tool. So the defeaturing algorithm has the same options, input data requirements, limitations as the low-level algorithm.

Input data

Currently, only the shapes of type SOLID, COMPSOLID, and COMPOUND of Solids are supported. And only the FACEs can be removed from the shape.

On the input the algorithm accepts the shape itself and the features which have to be removed. It does not matter how the features are given. It could be the separate faces or the collections of faces. The faces should belong to the initial shape, and those that do not belong will be ignored.

Options

The algorithm has the following options:

History support;

and the options available from base class:

Error/Warning reporting system;
Parallel processing mode.

Please note that the other options of the base class are not supported here and will have no effect.

For the details on the available options please refer to the description of BOPAlgo_RemoveFeatures algorithm.

Limitations

The defeaturing algorithm has the same limitations as BOPAlgo_RemoveFeatures algorithm.

Example

Here is the example of usage of the algorithm:

TopoDS_Shape aSolid = ...;               // Input shape to remove the features from
TopTools_ListOfShape aFeatures = ...;    // Features to remove from the shape
Standard_Boolean bRunParallel = ...;     // Parallel processing mode
Standard_Boolean isHistoryNeeded = ...;  // History support
BRepAlgoAPI_Defeaturing aDF;             // De-Featuring algorithm
aDF.SetShape(aSolid);                    // Set the shape
aDF.AddFacesToRemove(aFaces);            // Add faces to remove
aDF.SetRunParallel(bRunParallel);        // Define the processing mode (parallel or single)
aDF.TrackHistory(isHistoryNeeded);       // Define whether to track the shapes modifications
aDF.Build();                             // Perform the operation
if (!aDF.IsDone())                       // Check for the errors
{
  // error treatment
  Standard_SStream aSStream;
  aDF.DumpErrors(aSStream);
  return;
}
if (aDF.HasWarnings())                   // Check for the warnings
{
  // warnings treatment
  Standard_SStream aSStream;
  aDF.DumpWarnings(aSStream);
}
const TopoDS_Shape& aResult = aDF.Shape(); // Result shape

The algorithm preserves the type of the input shape in the result shape. Thus, if the input shape is a COMPSOLID, the resulting solids will also be put into a COMPSOLID.

Constructor & Destructor Documentation

◆ BRepAlgoAPI_Defeaturing()

BRepAlgoAPI_Defeaturing::BRepAlgoAPI_Defeaturing ( )

inline

Empty constructor.

Member Function Documentation

◆ AddFacesToRemove()

void BRepAlgoAPI_Defeaturing::AddFacesToRemove ( const TopTools_ListOfShape & theFaces )

inline

Adds the faces to remove from the input shape.

Parameters

theFaces [in] The list of shapes to extract the faces for removal.

◆ AddFaceToRemove()

void BRepAlgoAPI_Defeaturing::AddFaceToRemove ( const TopoDS_Shape & theFace )

inline

Adds the features to remove from the input shape.

Parameters

theFace [in] The shape to extract the faces for removal.

◆ Build()

virtual void BRepAlgoAPI_Defeaturing::Build ( )

overridevirtual

Performs the operation.

Reimplemented from BRepBuilderAPI_MakeShape.

◆ Clear()

virtual void BRepAlgoAPI_Defeaturing::Clear ( )

inlineoverrideprotectedvirtual

Clears all warnings and errors, and any data cached by the algorithm. User defined options are not cleared.

Reimplemented from BOPAlgo_Options.

◆ FacesToRemove()

const TopTools_ListOfShape& BRepAlgoAPI_Defeaturing::FacesToRemove ( ) const

inline

Returns the list of faces which have been requested for removal from the input shape.

◆ Generated()

virtual const TopTools_ListOfShape& BRepAlgoAPI_Defeaturing::Generated ( const TopoDS_Shape & theS )

overridevirtual

Returns the list of shapes generated from the shape <theS> during the operation.

Reimplemented from BRepBuilderAPI_MakeShape.

◆ GetHistory()

Handle< BRepTools_History > BRepAlgoAPI_Defeaturing::GetHistory ( )

inline

Returns the History of shapes modifications.

◆ HasHistory()

Standard_Boolean BRepAlgoAPI_Defeaturing::HasHistory ( ) const

inline

Returns whether the history was requested or not.

◆ InputShape()

const TopoDS_Shape& BRepAlgoAPI_Defeaturing::InputShape ( ) const

inline

Returns the input shape.

◆ IsDeleted()

virtual Standard_Boolean BRepAlgoAPI_Defeaturing::IsDeleted ( const TopoDS_Shape & theS )

overridevirtual

Returns true if the shape <theS> has been deleted during the operation. It means that the shape has no any trace in the result. Otherwise it returns false.

Reimplemented from BRepBuilderAPI_MakeShape.

◆ Modified()

virtual const TopTools_ListOfShape& BRepAlgoAPI_Defeaturing::Modified ( const TopoDS_Shape & theS )

overridevirtual

Returns the list of shapes modified from the shape <theS> during the operation.

Reimplemented from BRepBuilderAPI_MakeShape.

◆ SetShape()

void BRepAlgoAPI_Defeaturing::SetShape ( const TopoDS_Shape & theShape )

inline

Sets the shape for processing.

Parameters

theShape [in] The shape to remove the features from. It should either be the SOLID, COMPSOLID or COMPOUND of Solids.

◆ TrackHistory()

void BRepAlgoAPI_Defeaturing::TrackHistory ( const Standard_Boolean theFlag )

inline

Defines whether to track the modification of the shapes or not.

Field Documentation

◆ myFacesToRemove

TopTools_ListOfShape BRepAlgoAPI_Defeaturing::myFacesToRemove

protected

Features to remove from the shape.

◆ myFeatureRemovalTool

BOPAlgo_RemoveFeatures BRepAlgoAPI_Defeaturing::myFeatureRemovalTool

protected

Tool for the features removal.

◆ myInputShape

TopoDS_Shape BRepAlgoAPI_Defeaturing::myInputShape

protected

Input shape to remove the features from.

◆ myTrackHistory

Standard_Boolean BRepAlgoAPI_Defeaturing::myTrackHistory

protected

Defines whether to track the history of shapes modifications or not (true by default)

The documentation for this class was generated from the following file:

BRepAlgoAPI_Defeaturing.hxx

BRepAlgoAPI_Defeaturing Class Reference

Public Member Functions

Protected Member Functions

Protected Attributes

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ BRepAlgoAPI_Defeaturing()

Member Function Documentation

◆ AddFacesToRemove()

◆ AddFaceToRemove()

◆ Build()

◆ Clear()

◆ FacesToRemove()

◆ Generated()

◆ GetHistory()

◆ HasHistory()

◆ InputShape()

◆ IsDeleted()

◆ Modified()

◆ SetShape()

◆ TrackHistory()

Field Documentation

◆ myFacesToRemove

◆ myFeatureRemovalTool

◆ myInputShape

◆ myTrackHistory