Provides an algorithm to build object by Rotation sweep. More...

#include <BRepSweep_Rotation.hxx>

Inheritance diagram for BRepSweep_Rotation:

Public Member Functions
	BRepSweep_Rotation (const TopoDS_Shape &S, const Sweep_NumShape &N, const TopLoc_Location &L, const gp_Ax1 &A, const Standard_Real D, const Standard_Boolean C)
	Creates a topology by rotating <S> around A with the angle D. More...

TopoDS_Shape	MakeEmptyVertex (const TopoDS_Shape &aGenV, const Sweep_NumShape &aDirV) override
	Builds the vertex addressed by [aGenV,aDirV], with its geometric part, but without subcomponents. More...

TopoDS_Shape	MakeEmptyDirectingEdge (const TopoDS_Shape &aGenV, const Sweep_NumShape &aDirE) override
	Builds the edge addressed by [aGenV,aDirE], with its geometric part, but without subcomponents. More...

TopoDS_Shape	MakeEmptyGeneratingEdge (const TopoDS_Shape &aGenE, const Sweep_NumShape &aDirV) override
	Builds the edge addressed by [aGenE,aDirV], with its geometric part, but without subcomponents. More...

void	SetParameters (const TopoDS_Shape &aNewFace, TopoDS_Shape &aNewVertex, const TopoDS_Shape &aGenF, const TopoDS_Shape &aGenV, const Sweep_NumShape &aDirV) override
	Sets the parameters of the new vertex on the new face. The new face and new vertex where generated from aGenF, aGenV and aDirV . More...

void	SetDirectingParameter (const TopoDS_Shape &aNewEdge, TopoDS_Shape &aNewVertex, const TopoDS_Shape &aGenV, const Sweep_NumShape &aDirE, const Sweep_NumShape &aDirV) override
	Sets the parameter of the new vertex on the new edge. The new edge and new vertex where generated from aGenV aDirE, and aDirV. More...

void	SetGeneratingParameter (const TopoDS_Shape &aNewEdge, TopoDS_Shape &aNewVertex, const TopoDS_Shape &aGenE, const TopoDS_Shape &aGenV, const Sweep_NumShape &aDirV) override
	Sets the parameter of the new vertex on the new edge. The new edge and new vertex where generated from aGenE, aGenV and aDirV . More...

TopoDS_Shape	MakeEmptyFace (const TopoDS_Shape &aGenS, const Sweep_NumShape &aDirS) override
	Builds the face addressed by [aGenS,aDirS], with its geometric part, but without subcomponents. The couple aGenS, aDirS can be a "generating face and a directing vertex" or "a generating edge and a directing edge". More...

void	SetPCurve (const TopoDS_Shape &aNewFace, TopoDS_Shape &aNewEdge, const TopoDS_Shape &aGenF, const TopoDS_Shape &aGenE, const Sweep_NumShape &aDirV, const TopAbs_Orientation orien) override
	Sets the PCurve for a new edge on a new face. The new edge and the new face were generated using aGenF, aGenE and aDirV. More...

void	SetGeneratingPCurve (const TopoDS_Shape &aNewFace, TopoDS_Shape &aNewEdge, const TopoDS_Shape &aGenE, const Sweep_NumShape &aDirE, const Sweep_NumShape &aDirV, const TopAbs_Orientation orien) override
	Sets the PCurve for a new edge on a new face. The new edge and the new face were generated using aGenE, aDirE and aDirV. More...

void	SetDirectingPCurve (const TopoDS_Shape &aNewFace, TopoDS_Shape &aNewEdge, const TopoDS_Shape &aGenE, const TopoDS_Shape &aGenV, const Sweep_NumShape &aDirE, const TopAbs_Orientation orien) override
	Sets the PCurve for a new edge on a new face. The new edge and the new face were generated using aGenE, aDirE and aGenV. More...

TopAbs_Orientation	DirectSolid (const TopoDS_Shape &aGenS, const Sweep_NumShape &aDirS) override
	Returns the Orientation of the shell in the solid generated by the face aGenS with the edge aDirS. It is REVERSED if the surface is swept in the direction of the normal. More...

Standard_Boolean	GGDShapeIsToAdd (const TopoDS_Shape &aNewShape, const TopoDS_Shape &aNewSubShape, const TopoDS_Shape &aGenS, const TopoDS_Shape &aSubGenS, const Sweep_NumShape &aDirS) const override
	Returns true if aNewSubShape (addressed by aSubGenS and aDirS) must be added in aNewShape (addressed by aGenS and aDirS). More...

Standard_Boolean	GDDShapeIsToAdd (const TopoDS_Shape &aNewShape, const TopoDS_Shape &aNewSubShape, const TopoDS_Shape &aGenS, const Sweep_NumShape &aDirS, const Sweep_NumShape &aSubDirS) const override
	Returns true if aNewSubShape (addressed by aGenS and aSubDirS) must be added in aNewShape (addressed by aGenS and aDirS). More...

Standard_Boolean	SeparatedWires (const TopoDS_Shape &aNewShape, const TopoDS_Shape &aNewSubShape, const TopoDS_Shape &aGenS, const TopoDS_Shape &aSubGenS, const Sweep_NumShape &aDirS) const override
	In some particular cases the topology of a generated face must be composed of independant closed wires, in this case this function returns true. The only case in whitch the function may return true is a planar face in a closed revol. More...

virtual TopoDS_Shape	SplitShell (const TopoDS_Shape &aNewShape) const override
	In some particular cases the topology of a generated Shell must be composed of independant closed Shells, in this case this function returns a Compound of independant Shells. More...

Standard_Boolean	HasShape (const TopoDS_Shape &aGenS, const Sweep_NumShape &aDirS) const override
	Returns true if aDirS and aGenS addresses a resulting Shape. In some specific cases the shape can be geometrically inexsistant, then this function returns false. More...

Standard_Boolean	IsInvariant (const TopoDS_Shape &aGenS) const override
	Returns true when the geometry of aGenS is not modified by the rotation. More...

gp_Ax1	Axe () const
	returns the axis More...

Standard_Real	Angle () const
	returns the angle. More...

Public Member Functions inherited from BRepSweep_Trsf
void	Init ()
	ends the construction of the swept primitive calling the virtual geometric functions that can't be called in the initialize. More...

Standard_Boolean	Process (const TopoDS_Shape &aGenS, const Sweep_NumShape &aDirV)
	function called to analize the way of construction of the shapes generated by aGenS and aDirV. More...

void	SetContinuity (const TopoDS_Shape &aGenS, const Sweep_NumShape &aDirS)
	Called to propagate the continuity of every vertex between two edges of the generating wire aGenS on the generated edge and faces. More...

Public Member Functions inherited from BRepSweep_NumLinearRegularSweep
virtual	~BRepSweep_NumLinearRegularSweep ()

TopoDS_Shape	Shape (const TopoDS_Shape &aGenS, const Sweep_NumShape &aDirS)
	Returns the resulting Shape indexed by aDirS and aGenS. More...

TopoDS_Shape	Shape (const TopoDS_Shape &aGenS)
	Returns the resulting Shape indexed by myDirWire and aGenS. More...

TopoDS_Shape	Shape ()
	Returns the resulting Shape indexed by myDirWire and myGenShape. More...

TopoDS_Shape	FirstShape ()
	Returns the resulting Shape indexed by the first Vertex of myDirWire and myGenShape. More...

TopoDS_Shape	LastShape ()
	Returns the resulting Shape indexed by the last Vertex of myDirWire and myGenShape. More...

TopoDS_Shape	FirstShape (const TopoDS_Shape &aGenS)
	Returns the resulting Shape indexed by the first Vertex of myDirWire and aGenS. More...

TopoDS_Shape	LastShape (const TopoDS_Shape &aGenS)
	Returns the resulting Shape indexed by the last Vertex of myDirWire and aGenS. More...

Standard_Boolean	Closed () const

Additional Inherited Members
Protected Member Functions inherited from BRepSweep_Trsf
	BRepSweep_Trsf (const BRep_Builder &aBuilder, const TopoDS_Shape &aGenShape, const Sweep_NumShape &aDirWire, const TopLoc_Location &aLocation, const Standard_Boolean aCopy)
	Initialize the Trsf BrepSweep, if aCopy is true the basis elements are shared as often as possible, else everything is copied. More...

Protected Member Functions inherited from BRepSweep_NumLinearRegularSweep
	BRepSweep_NumLinearRegularSweep (const BRepSweep_Builder &aBuilder, const TopoDS_Shape &aGenShape, const Sweep_NumShape &aDirWire)
	Creates a NumLinearRegularSweep. <aBuilder> gives basic topological services. More...

Protected Attributes inherited from BRepSweep_Trsf
TopLoc_Location	myLocation

Standard_Boolean	myCopy

Protected Attributes inherited from BRepSweep_NumLinearRegularSweep
BRepSweep_Builder	myBuilder

TopoDS_Shape	myGenShape

Sweep_NumShape	myDirWire

BRepSweep_Tool	myGenShapeTool

Sweep_NumShapeTool	myDirShapeTool

TopTools_Array2OfShape	myShapes

TColStd_Array2OfBoolean	myBuiltShapes

Detailed Description

Provides an algorithm to build object by Rotation sweep.

Constructor & Destructor Documentation

◆ BRepSweep_Rotation()

BRepSweep_Rotation::BRepSweep_Rotation	(	const TopoDS_Shape &	S,
		const Sweep_NumShape &	N,
		const TopLoc_Location &	L,
		const gp_Ax1 &	A,
		const Standard_Real	D,
		const Standard_Boolean	C
	)

Creates a topology by rotating <S> around A with the angle D.

Member Function Documentation

◆ Angle()

Standard_Real BRepSweep_Rotation::Angle ( ) const

returns the angle.

◆ Axe()

gp_Ax1 BRepSweep_Rotation::Axe ( ) const

returns the axis

◆ DirectSolid()

TopAbs_Orientation BRepSweep_Rotation::DirectSolid	(	const TopoDS_Shape &	aGenS,
		const Sweep_NumShape &	aDirS
	)

overridevirtual

Returns the Orientation of the shell in the solid generated by the face aGenS with the edge aDirS. It is REVERSED if the surface is swept in the direction of the normal.

Implements BRepSweep_NumLinearRegularSweep.

◆ GDDShapeIsToAdd()

Standard_Boolean BRepSweep_Rotation::GDDShapeIsToAdd	(	const TopoDS_Shape &	aNewShape,
		const TopoDS_Shape &	aNewSubShape,
		const TopoDS_Shape &	aGenS,
		const Sweep_NumShape &	aDirS,
		const Sweep_NumShape &	aSubDirS
	)		const

overridevirtual

Returns true if aNewSubShape (addressed by aGenS and aSubDirS) must be added in aNewShape (addressed by aGenS and aDirS).

Implements BRepSweep_Trsf.

◆ GGDShapeIsToAdd()

Standard_Boolean BRepSweep_Rotation::GGDShapeIsToAdd	(	const TopoDS_Shape &	aNewShape,
		const TopoDS_Shape &	aNewSubShape,
		const TopoDS_Shape &	aGenS,
		const TopoDS_Shape &	aSubGenS,
		const Sweep_NumShape &	aDirS
	)		const

overridevirtual

Returns true if aNewSubShape (addressed by aSubGenS and aDirS) must be added in aNewShape (addressed by aGenS and aDirS).

Implements BRepSweep_Trsf.

◆ HasShape()

Standard_Boolean BRepSweep_Rotation::HasShape	(	const TopoDS_Shape &	aGenS,
		const Sweep_NumShape &	aDirS
	)		const

overridevirtual

Returns true if aDirS and aGenS addresses a resulting Shape. In some specific cases the shape can be geometrically inexsistant, then this function returns false.

Implements BRepSweep_Trsf.

◆ IsInvariant()

Standard_Boolean BRepSweep_Rotation::IsInvariant ( const TopoDS_Shape & aGenS ) const

overridevirtual

Returns true when the geometry of aGenS is not modified by the rotation.

Implements BRepSweep_Trsf.

◆ MakeEmptyDirectingEdge()

TopoDS_Shape BRepSweep_Rotation::MakeEmptyDirectingEdge	(	const TopoDS_Shape &	aGenV,
		const Sweep_NumShape &	aDirE
	)

overridevirtual

Builds the edge addressed by [aGenV,aDirE], with its geometric part, but without subcomponents.

Implements BRepSweep_Trsf.

◆ MakeEmptyFace()

TopoDS_Shape BRepSweep_Rotation::MakeEmptyFace	(	const TopoDS_Shape &	aGenS,
		const Sweep_NumShape &	aDirS
	)

overridevirtual

Builds the face addressed by [aGenS,aDirS], with its geometric part, but without subcomponents. The couple aGenS, aDirS can be a "generating face and a directing vertex" or "a generating edge and a directing edge".

Implements BRepSweep_Trsf.

◆ MakeEmptyGeneratingEdge()

TopoDS_Shape BRepSweep_Rotation::MakeEmptyGeneratingEdge	(	const TopoDS_Shape &	aGenE,
		const Sweep_NumShape &	aDirV
	)

overridevirtual

Builds the edge addressed by [aGenE,aDirV], with its geometric part, but without subcomponents.

Implements BRepSweep_Trsf.

◆ MakeEmptyVertex()

TopoDS_Shape BRepSweep_Rotation::MakeEmptyVertex	(	const TopoDS_Shape &	aGenV,
		const Sweep_NumShape &	aDirV
	)

overridevirtual

Builds the vertex addressed by [aGenV,aDirV], with its geometric part, but without subcomponents.

Implements BRepSweep_Trsf.

◆ SeparatedWires()

Standard_Boolean BRepSweep_Rotation::SeparatedWires	(	const TopoDS_Shape &	aNewShape,
		const TopoDS_Shape &	aNewSubShape,
		const TopoDS_Shape &	aGenS,
		const TopoDS_Shape &	aSubGenS,
		const Sweep_NumShape &	aDirS
	)		const

overridevirtual

In some particular cases the topology of a generated face must be composed of independant closed wires, in this case this function returns true. The only case in whitch the function may return true is a planar face in a closed revol.

Implements BRepSweep_Trsf.

◆ SetDirectingParameter()

void BRepSweep_Rotation::SetDirectingParameter	(	const TopoDS_Shape &	aNewEdge,
		TopoDS_Shape &	aNewVertex,
		const TopoDS_Shape &	aGenV,
		const Sweep_NumShape &	aDirE,
		const Sweep_NumShape &	aDirV
	)

overridevirtual

Sets the parameter of the new vertex on the new edge. The new edge and new vertex where generated from aGenV aDirE, and aDirV.

Implements BRepSweep_Trsf.

◆ SetDirectingPCurve()

void BRepSweep_Rotation::SetDirectingPCurve	(	const TopoDS_Shape &	aNewFace,
		TopoDS_Shape &	aNewEdge,
		const TopoDS_Shape &	aGenE,
		const TopoDS_Shape &	aGenV,
		const Sweep_NumShape &	aDirE,
		const TopAbs_Orientation	orien
	)

overridevirtual

Sets the PCurve for a new edge on a new face. The new edge and the new face were generated using aGenE, aDirE and aGenV.

Implements BRepSweep_Trsf.

◆ SetGeneratingParameter()

void BRepSweep_Rotation::SetGeneratingParameter	(	const TopoDS_Shape &	aNewEdge,
		TopoDS_Shape &	aNewVertex,
		const TopoDS_Shape &	aGenE,
		const TopoDS_Shape &	aGenV,
		const Sweep_NumShape &	aDirV
	)

overridevirtual

Sets the parameter of the new vertex on the new edge. The new edge and new vertex where generated from aGenE, aGenV and aDirV .

Implements BRepSweep_Trsf.

◆ SetGeneratingPCurve()

void BRepSweep_Rotation::SetGeneratingPCurve	(	const TopoDS_Shape &	aNewFace,
		TopoDS_Shape &	aNewEdge,
		const TopoDS_Shape &	aGenE,
		const Sweep_NumShape &	aDirE,
		const Sweep_NumShape &	aDirV,
		const TopAbs_Orientation	orien
	)

overridevirtual

Sets the PCurve for a new edge on a new face. The new edge and the new face were generated using aGenE, aDirE and aDirV.

Implements BRepSweep_Trsf.

◆ SetParameters()

void BRepSweep_Rotation::SetParameters	(	const TopoDS_Shape &	aNewFace,
		TopoDS_Shape &	aNewVertex,
		const TopoDS_Shape &	aGenF,
		const TopoDS_Shape &	aGenV,
		const Sweep_NumShape &	aDirV
	)

overridevirtual

Sets the parameters of the new vertex on the new face. The new face and new vertex where generated from aGenF, aGenV and aDirV .

Implements BRepSweep_Trsf.

◆ SetPCurve()

void BRepSweep_Rotation::SetPCurve	(	const TopoDS_Shape &	aNewFace,
		TopoDS_Shape &	aNewEdge,
		const TopoDS_Shape &	aGenF,
		const TopoDS_Shape &	aGenE,
		const Sweep_NumShape &	aDirV,
		const TopAbs_Orientation	orien
	)

overridevirtual

Sets the PCurve for a new edge on a new face. The new edge and the new face were generated using aGenF, aGenE and aDirV.

Implements BRepSweep_Trsf.

◆ SplitShell()

virtual TopoDS_Shape BRepSweep_Rotation::SplitShell ( const TopoDS_Shape & aNewShape ) const

overridevirtual

In some particular cases the topology of a generated Shell must be composed of independant closed Shells, in this case this function returns a Compound of independant Shells.

Reimplemented from BRepSweep_NumLinearRegularSweep.

The documentation for this class was generated from the following file:

BRepSweep_Rotation.hxx

BRepSweep_Rotation Class Reference

Public Member Functions

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ BRepSweep_Rotation()

Member Function Documentation

◆ Angle()

◆ Axe()

◆ DirectSolid()

◆ GDDShapeIsToAdd()

◆ GGDShapeIsToAdd()

◆ HasShape()

◆ IsInvariant()

◆ MakeEmptyDirectingEdge()

◆ MakeEmptyFace()

◆ MakeEmptyGeneratingEdge()

◆ MakeEmptyVertex()

◆ SeparatedWires()

◆ SetDirectingParameter()

◆ SetDirectingPCurve()

◆ SetGeneratingParameter()

◆ SetGeneratingPCurve()

◆ SetParameters()

◆ SetPCurve()

◆ SplitShell()