The BRepTools package provides utilities for BRep data structures. More...

#include <BRepTools.hxx>

Static Public Member Functions
static void	UVBounds (const TopoDS_Face &F, Standard_Real &UMin, Standard_Real &UMax, Standard_Real &VMin, Standard_Real &VMax)
	Returns in UMin, UMax, VMin, VMax the bounding values in the parametric space of F. More...

static void	UVBounds (const TopoDS_Face &F, const TopoDS_Wire &W, Standard_Real &UMin, Standard_Real &UMax, Standard_Real &VMin, Standard_Real &VMax)
	Returns in UMin, UMax, VMin, VMax the bounding values of the wire in the parametric space of F. More...

static void	UVBounds (const TopoDS_Face &F, const TopoDS_Edge &E, Standard_Real &UMin, Standard_Real &UMax, Standard_Real &VMin, Standard_Real &VMax)
	Returns in UMin, UMax, VMin, VMax the bounding values of the edge in the parametric space of F. More...

static void	AddUVBounds (const TopoDS_Face &F, Bnd_Box2d &B)
	Adds to the box the bounding values in the parametric space of F. More...

static void	AddUVBounds (const TopoDS_Face &F, const TopoDS_Wire &W, Bnd_Box2d &B)
	Adds to the box the bounding values of the wire in the parametric space of F. More...

static void	AddUVBounds (const TopoDS_Face &F, const TopoDS_Edge &E, Bnd_Box2d &B)
	Adds to the box the bounding values of the edge in the parametric space of F. More...

static void	Update (const TopoDS_Vertex &V)
	Update a vertex (nothing is done) More...

static void	Update (const TopoDS_Edge &E)
	Update an edge, compute 2d bounding boxes. More...

static void	Update (const TopoDS_Wire &W)
	Update a wire (nothing is done) More...

static void	Update (const TopoDS_Face &F)
	Update a Face, update UV points. More...

static void	Update (const TopoDS_Shell &S)
	Update a shell (nothing is done) More...

static void	Update (const TopoDS_Solid &S)
	Update a solid (nothing is done) More...

static void	Update (const TopoDS_CompSolid &C)
	Update a composite solid (nothing is done) More...

static void	Update (const TopoDS_Compound &C)
	Update a compound (nothing is done) More...

static void	Update (const TopoDS_Shape &S)
	Update a shape, call the corect update. More...

static void	UpdateFaceUVPoints (const TopoDS_Face &theF)
	For each edge of the face <F> reset the UV points to the bounding points of the parametric curve of the edge on the face. More...

static void	Clean (const TopoDS_Shape &S)
	Removes all the triangulations of the faces of <S> and removes all polygons on triangulations of the edges. More...

static void	RemoveUnusedPCurves (const TopoDS_Shape &S)
	Removes all the pcurves of the edges of <S> that refer to surfaces not belonging to any face of <S> More...

static Standard_Boolean	Triangulation (const TopoDS_Shape &S, const Standard_Real deflec)
	verifies that each face from the shape <S> has got a triangulation with a deflection <= deflec and the edges a discretisation on this triangulation. More...

static Standard_Boolean	Compare (const TopoDS_Vertex &V1, const TopoDS_Vertex &V2)
	Returns True if the distance between the two vertices is lower than their tolerance. More...

static Standard_Boolean	Compare (const TopoDS_Edge &E1, const TopoDS_Edge &E2)
	Returns True if the distance between the two edges is lower than their tolerance. More...

static TopoDS_Wire	OuterWire (const TopoDS_Face &F)
	Returns the outer most wire of <F>. Returns a Null wire if <F> has no wires. More...

static void	Map3DEdges (const TopoDS_Shape &S, TopTools_IndexedMapOfShape &M)
	Stores in the map <M> all the 3D topology edges of <S>. More...

static Standard_Boolean	IsReallyClosed (const TopoDS_Edge &E, const TopoDS_Face &F)
	Verifies that the edge <E> is found two times on the face <F> before calling BRep_Tool::IsClosed. More...

static void	DetectClosedness (const TopoDS_Face &theFace, Standard_Boolean &theUclosed, Standard_Boolean &theVclosed)
	Detect closedness of face in U and V directions. More...

static void	Dump (const TopoDS_Shape &Sh, Standard_OStream &S)
	Dumps the topological structure and the geometry of <Sh> on the stream <S>. More...

static void	Write (const TopoDS_Shape &Sh, Standard_OStream &S, const Handle< Message_ProgressIndicator > &PR=NULL)
	Writes <Sh> on <S> in an ASCII format. More...

static void	Read (TopoDS_Shape &Sh, Standard_IStream &S, const BRep_Builder &B, const Handle< Message_ProgressIndicator > &PR=NULL)
	Reads a Shape from <S> in returns it in <Sh>. is used to build the shape. More...

static Standard_Boolean	Write (const TopoDS_Shape &Sh, const Standard_CString File, const Handle< Message_ProgressIndicator > &PR=NULL)
	Writes <Sh> in <File>. More...

static Standard_Boolean	Read (TopoDS_Shape &Sh, const Standard_CString File, const BRep_Builder &B, const Handle< Message_ProgressIndicator > &PR=NULL)
	Reads a Shape from <File>, returns it in <Sh>. is used to build the shape. More...

static Standard_Real	EvalAndUpdateTol (const TopoDS_Edge &theE, const Handle< Geom_Curve > &theC3d, const Handle< Geom2d_Curve > theC2d, const Handle< Geom_Surface > &theS, const Standard_Real theF, const Standard_Real theL)
	Evals real tolerance of edge <theE>. <theC3d>, <theC2d>, <theS>, <theF>, <theL> are correspondently 3d curve of edge, 2d curve on surface <theS> and rang of edge If calculated tolerance is more then current edge tolerance, edge is updated. Method returns actual tolerance of edge. More...

Detailed Description

The BRepTools package provides utilities for BRep data structures.

WireExplorer : A tool to explore the topology of a wire in the order of the edges.
ShapeSet : Tools used for dumping, writing and reading.
UVBounds : Methods to compute the limits of the boundary of a face, a wire or an edge in the parametric space of a face.
Update : Methods to call when a topology has been created to compute all missing data.
UpdateFaceUVPoints: Method to update the UV points stored with the edges on a face.
Compare : Method to compare two vertices.
Compare : Method to compare two edges.
OuterWire : A method to find the outer wire of a face.
Map3DEdges : A method to map all the 3D Edges of a Shape.
Dump : A method to dump a BRep object.

Member Function Documentation

◆ AddUVBounds() [1/3]

static void BRepTools::AddUVBounds	(	const TopoDS_Face &	F,
		Bnd_Box2d &	B
	)

static

Adds to the box the bounding values in the parametric space of F.

◆ AddUVBounds() [2/3]

static void BRepTools::AddUVBounds	(	const TopoDS_Face &	F,
		const TopoDS_Wire &	W,
		Bnd_Box2d &	B
	)

static

Adds to the box the bounding values of the wire in the parametric space of F.

◆ AddUVBounds() [3/3]

static void BRepTools::AddUVBounds	(	const TopoDS_Face &	F,
		const TopoDS_Edge &	E,
		Bnd_Box2d &	B
	)

static

Adds to the box the bounding values of the edge in the parametric space of F.

◆ Clean()

static void BRepTools::Clean ( const TopoDS_Shape & S )

static

Removes all the triangulations of the faces of <S> and removes all polygons on triangulations of the edges.

◆ Compare() [1/2]

static Standard_Boolean BRepTools::Compare	(	const TopoDS_Vertex &	V1,
		const TopoDS_Vertex &	V2
	)

static

Returns True if the distance between the two vertices is lower than their tolerance.

◆ Compare() [2/2]

static Standard_Boolean BRepTools::Compare	(	const TopoDS_Edge &	E1,
		const TopoDS_Edge &	E2
	)

static

Returns True if the distance between the two edges is lower than their tolerance.

◆ DetectClosedness()

static void BRepTools::DetectClosedness	(	const TopoDS_Face &	theFace,
		Standard_Boolean &	theUclosed,
		Standard_Boolean &	theVclosed
	)

static

Detect closedness of face in U and V directions.

◆ Dump()

static void BRepTools::Dump	(	const TopoDS_Shape &	Sh,
		Standard_OStream &	S
	)

static

Dumps the topological structure and the geometry of <Sh> on the stream <S>.

◆ EvalAndUpdateTol()

static Standard_Real BRepTools::EvalAndUpdateTol	(	const TopoDS_Edge &	theE,
		const Handle< Geom_Curve > &	theC3d,
		const Handle< Geom2d_Curve >	theC2d,
		const Handle< Geom_Surface > &	theS,
		const Standard_Real	theF,
		const Standard_Real	theL
	)

static

Evals real tolerance of edge <theE>. <theC3d>, <theC2d>, <theS>, <theF>, <theL> are correspondently 3d curve of edge, 2d curve on surface <theS> and rang of edge If calculated tolerance is more then current edge tolerance, edge is updated. Method returns actual tolerance of edge.

◆ IsReallyClosed()

static Standard_Boolean BRepTools::IsReallyClosed	(	const TopoDS_Edge &	E,
		const TopoDS_Face &	F
	)

static

Verifies that the edge <E> is found two times on the face <F> before calling BRep_Tool::IsClosed.

◆ Map3DEdges()

static void BRepTools::Map3DEdges	(	const TopoDS_Shape &	S,
		TopTools_IndexedMapOfShape &	M
	)

static

Stores in the map <M> all the 3D topology edges of <S>.

◆ OuterWire()

static TopoDS_Wire BRepTools::OuterWire ( const TopoDS_Face & F )

static

Returns the outer most wire of <F>. Returns a Null wire if <F> has no wires.

◆ Read() [1/2]

static void BRepTools::Read	(	TopoDS_Shape &	Sh,
		Standard_IStream &	S,
		const BRep_Builder &	B,
		const Handle< Message_ProgressIndicator > &	PR = `NULL`
	)

static

Reads a Shape from <S> in returns it in <Sh>. is used to build the shape.

◆ Read() [2/2]

static Standard_Boolean BRepTools::Read	(	TopoDS_Shape &	Sh,
		const Standard_CString	File,
		const BRep_Builder &	B,
		const Handle< Message_ProgressIndicator > &	PR = `NULL`
	)

static

Reads a Shape from <File>, returns it in <Sh>. is used to build the shape.

◆ RemoveUnusedPCurves()

static void BRepTools::RemoveUnusedPCurves ( const TopoDS_Shape & S )

static

Removes all the pcurves of the edges of <S> that refer to surfaces not belonging to any face of <S>

◆ Triangulation()

static Standard_Boolean BRepTools::Triangulation	(	const TopoDS_Shape &	S,
		const Standard_Real	deflec
	)

static

verifies that each face from the shape <S> has got a triangulation with a deflection <= deflec and the edges a discretisation on this triangulation.

◆ Update() [1/9]

static void BRepTools::Update ( const TopoDS_Vertex & V )

static

Update a vertex (nothing is done)

◆ Update() [2/9]

static void BRepTools::Update ( const TopoDS_Edge & E )

static

Update an edge, compute 2d bounding boxes.

◆ Update() [3/9]

static void BRepTools::Update ( const TopoDS_Wire & W )

static

Update a wire (nothing is done)

◆ Update() [4/9]

static void BRepTools::Update ( const TopoDS_Face & F )

static

Update a Face, update UV points.

◆ Update() [5/9]

static void BRepTools::Update ( const TopoDS_Shell & S )

static

Update a shell (nothing is done)

◆ Update() [6/9]

static void BRepTools::Update ( const TopoDS_Solid & S )

static

Update a solid (nothing is done)

◆ Update() [7/9]

static void BRepTools::Update ( const TopoDS_CompSolid & C )

static

Update a composite solid (nothing is done)

◆ Update() [8/9]

static void BRepTools::Update ( const TopoDS_Compound & C )

static

Update a compound (nothing is done)

◆ Update() [9/9]

static void BRepTools::Update ( const TopoDS_Shape & S )

static

Update a shape, call the corect update.

◆ UpdateFaceUVPoints()

static void BRepTools::UpdateFaceUVPoints ( const TopoDS_Face & theF )

static

For each edge of the face <F> reset the UV points to the bounding points of the parametric curve of the edge on the face.

◆ UVBounds() [1/3]

static void BRepTools::UVBounds	(	const TopoDS_Face &	F,
		Standard_Real &	UMin,
		Standard_Real &	UMax,
		Standard_Real &	VMin,
		Standard_Real &	VMax
	)

static

Returns in UMin, UMax, VMin, VMax the bounding values in the parametric space of F.

◆ UVBounds() [2/3]

static void BRepTools::UVBounds	(	const TopoDS_Face &	F,
		const TopoDS_Wire &	W,
		Standard_Real &	UMin,
		Standard_Real &	UMax,
		Standard_Real &	VMin,
		Standard_Real &	VMax
	)

static

Returns in UMin, UMax, VMin, VMax the bounding values of the wire in the parametric space of F.

◆ UVBounds() [3/3]

static void BRepTools::UVBounds	(	const TopoDS_Face &	F,
		const TopoDS_Edge &	E,
		Standard_Real &	UMin,
		Standard_Real &	UMax,
		Standard_Real &	VMin,
		Standard_Real &	VMax
	)

static

Returns in UMin, UMax, VMin, VMax the bounding values of the edge in the parametric space of F.

◆ Write() [1/2]

static void BRepTools::Write	(	const TopoDS_Shape &	Sh,
		Standard_OStream &	S,
		const Handle< Message_ProgressIndicator > &	PR = `NULL`
	)

static

Writes <Sh> on <S> in an ASCII format.

◆ Write() [2/2]

static Standard_Boolean BRepTools::Write	(	const TopoDS_Shape &	Sh,
		const Standard_CString	File,
		const Handle< Message_ProgressIndicator > &	PR = `NULL`
	)

static

Writes <Sh> in <File>.

The documentation for this class was generated from the following file:

BRepTools.hxx

BRepTools Class Reference

Static Public Member Functions

Detailed Description

Member Function Documentation

◆ AddUVBounds() [1/3]

◆ AddUVBounds() [2/3]

◆ AddUVBounds() [3/3]

◆ Clean()

◆ Compare() [1/2]

◆ Compare() [2/2]

◆ DetectClosedness()

◆ Dump()

◆ EvalAndUpdateTol()

◆ IsReallyClosed()

◆ Map3DEdges()

◆ OuterWire()

◆ Read() [1/2]

◆ Read() [2/2]

◆ RemoveUnusedPCurves()

◆ Triangulation()

◆ Update() [1/9]

◆ Update() [2/9]

◆ Update() [3/9]

◆ Update() [4/9]

◆ Update() [5/9]

◆ Update() [6/9]

◆ Update() [7/9]

◆ Update() [8/9]

◆ Update() [9/9]

◆ UpdateFaceUVPoints()

◆ UVBounds() [1/3]

◆ UVBounds() [2/3]

◆ UVBounds() [3/3]

◆ Write() [1/2]

◆ Write() [2/2]