Describes a circle in 3D space. A circle is defined by its radius and, as with any conic curve, is positioned in space with a right-handed coordinate system (gp_Ax2 object) where: More...
#include <Geom_Circle.hxx>
Inheritance diagram for Geom_Circle:
Public Member Functions | |
| Geom_Circle (const gp_Circ &C) | |
| Constructs a circle by conversion of the gp_Circ circle C. More... | |
| Geom_Circle (const gp_Ax2 &A2, const Standard_Real Radius) | |
| Constructs a circle of radius Radius, where A2 locates the circle and defines its orientation in 3D space such that: More... | |
| void | SetCirc (const gp_Circ &C) |
| Set <me> so that <me> has the same geometric properties as C. More... | |
| void | SetRadius (const Standard_Real R) |
| Assigns the value R to the radius of this circle. Note: it is possible to have a circle with a radius equal to 0.0. Exceptions - Standard_ConstructionError if R is negative. More... | |
| gp_Circ | Circ () const |
| returns the non transient circle from gp with the same geometric properties as <me>. More... | |
| Standard_Real | Radius () const |
| Returns the radius of this circle. More... | |
| Standard_Real | ReversedParameter (const Standard_Real U) const override |
| Computes the parameter on the reversed circle for the point of parameter U on this circle. For a circle, the returned value is: 2.*Pi - U. More... | |
| Standard_Real | Eccentricity () const override |
| Returns the eccentricity e = 0 for a circle. More... | |
| Standard_Real | FirstParameter () const override |
| Returns the value of the first parameter of this circle. This is 0.0, which gives the start point of this circle, or The start point and end point of a circle are coincident. More... | |
| Standard_Real | LastParameter () const override |
| Returns the value of the last parameter of this circle. This is 2.*Pi, which gives the end point of this circle. The start point and end point of a circle are coincident. More... | |
| Standard_Boolean | IsClosed () const override |
| returns True. More... | |
| Standard_Boolean | IsPeriodic () const override |
| returns True. More... | |
| void | D0 (const Standard_Real U, gp_Pnt &P) const override |
| Returns in P the point of parameter U. P = C + R * Cos (U) * XDir + R * Sin (U) * YDir where C is the center of the circle , XDir the XDirection and YDir the YDirection of the circle's local coordinate system. More... | |
| void | D1 (const Standard_Real U, gp_Pnt &P, gp_Vec &V1) const override |
| Returns the point P of parameter U and the first derivative V1. More... | |
| void | D2 (const Standard_Real U, gp_Pnt &P, gp_Vec &V1, gp_Vec &V2) const override |
| Returns the point P of parameter U, the first and second derivatives V1 and V2. More... | |
| void | D3 (const Standard_Real U, gp_Pnt &P, gp_Vec &V1, gp_Vec &V2, gp_Vec &V3) const override |
| Returns the point P of parameter u, the first second and third derivatives V1 V2 and V3. More... | |
| gp_Vec | DN (const Standard_Real U, const Standard_Integer N) const override |
| The returned vector gives the value of the derivative for the order of derivation N. Raised if N < 1. More... | |
| void | Transform (const gp_Trsf &T) override |
| Applies the transformation T to this circle. More... | |
| Handle< Geom_Geometry > | Copy () const override |
| Creates a new object which is a copy of this circle. More... | |
 Public Member Functions inherited from Geom_Conic | |
| void | SetAxis (const gp_Ax1 &A1) |
| Changes the orientation of the conic's plane. The normal axis to the plane is A1. The XAxis and the YAxis are recomputed. More... | |
| void | SetLocation (const gp_Pnt &P) |
| changes the location point of the conic. More... | |
| void | SetPosition (const gp_Ax2 &A2) |
| changes the local coordinate system of the conic. More... | |
| gp_Ax1 | Axis () const |
| Returns the "main Axis" of this conic. This axis is normal to the plane of the conic. More... | |
| gp_Pnt | Location () const |
| Returns the location point of the conic. For the circle, the ellipse and the hyperbola it is the center of the conic. For the parabola it is the Apex of the parabola. More... | |
| const gp_Ax2 & | Position () const |
| Returns the local coordinates system of the conic. The main direction of the Axis2Placement is normal to the plane of the conic. The X direction of the Axis2placement is in the plane of the conic and corresponds to the origin for the conic's parametric value u. More... | |
| gp_Ax1 | XAxis () const |
| Returns the XAxis of the conic. This axis defines the origin of parametrization of the conic. This axis is perpendicular to the Axis of the conic. This axis and the Yaxis define the plane of the conic. More... | |
| gp_Ax1 | YAxis () const |
| Returns the YAxis of the conic. The YAxis is perpendicular to the Xaxis. This axis and the Xaxis define the plane of the conic. More... | |
| void | Reverse () override |
| Reverses the direction of parameterization of <me>. The local coordinate system of the conic is modified. More... | |
| GeomAbs_Shape | Continuity () const override |
| The continuity of the conic is Cn. More... | |
| Standard_Boolean | IsCN (const Standard_Integer N) const override |
| Returns True. Raised if N < 0. More... | |
| Public Member Functions inherited from Geom_Curve | |
| virtual Standard_Real | TransformedParameter (const Standard_Real U, const gp_Trsf &T) const |
| Returns the parameter on the transformed curve for the transform of the point of parameter U on <me>. More... | |
| virtual Standard_Real | ParametricTransformation (const gp_Trsf &T) const |
| Returns a coefficient to compute the parameter on the transformed curve for the transform of the point on <me>. More... | |
| Handle< Geom_Curve > | Reversed () const |
| Returns a copy of <me> reversed. More... | |
| virtual Standard_Real | Period () const |
| Returns the period of this curve. Exceptions Standard_NoSuchObject if this curve is not periodic. More... | |
| gp_Pnt | Value (const Standard_Real U) const |
| Computes the point of parameter U on <me>. If the curve is periodic then the returned point is P(U) with U = Ustart + (U - Uend) where Ustart and Uend are the parametric bounds of the curve. it is implemented with D0. More... | |
| Public Member Functions inherited from Geom_Geometry | |
| void | Mirror (const gp_Pnt &P) |
| Performs the symmetrical transformation of a Geometry with respect to the point P which is the center of the symmetry. More... | |
| void | Mirror (const gp_Ax1 &A1) |
| Performs the symmetrical transformation of a Geometry with respect to an axis placement which is the axis of the symmetry. More... | |
| void | Mirror (const gp_Ax2 &A2) |
| Performs the symmetrical transformation of a Geometry with respect to a plane. The axis placement A2 locates the plane of the symmetry : (Location, XDirection, YDirection). More... | |
| void | Rotate (const gp_Ax1 &A1, const Standard_Real Ang) |
| Rotates a Geometry. A1 is the axis of the rotation. Ang is the angular value of the rotation in radians. More... | |
| void | Scale (const gp_Pnt &P, const Standard_Real S) |
| Scales a Geometry. S is the scaling value. More... | |
| void | Translate (const gp_Vec &V) |
| Translates a Geometry. V is the vector of the tanslation. More... | |
| void | Translate (const gp_Pnt &P1, const gp_Pnt &P2) |
| Translates a Geometry from the point P1 to the point P2. More... | |
| Handle< Geom_Geometry > | Mirrored (const gp_Pnt &P) const |
| Handle< Geom_Geometry > | Mirrored (const gp_Ax1 &A1) const |
| Handle< Geom_Geometry > | Mirrored (const gp_Ax2 &A2) const |
| Handle< Geom_Geometry > | Rotated (const gp_Ax1 &A1, const Standard_Real Ang) const |
| Handle< Geom_Geometry > | Scaled (const gp_Pnt &P, const Standard_Real S) const |
| Handle< Geom_Geometry > | Transformed (const gp_Trsf &T) const |
| Handle< Geom_Geometry > | Translated (const gp_Vec &V) const |
| Handle< Geom_Geometry > | Translated (const gp_Pnt &P1, const gp_Pnt &P2) const |
| Public Member Functions inherited from Standard_Transient | |
| Standard_Transient () | |
| Empty constructor. More... | |
| Standard_Transient (const Standard_Transient &) | |
| Copy constructor – does nothing. More... | |
| Standard_Transient & | operator= (const Standard_Transient &) |
| Assignment operator, needed to avoid copying reference counter. More... | |
| virtual | ~Standard_Transient () |
| Destructor must be virtual. More... | |
| virtual void | Delete () const |
| Memory deallocator for transient classes. More... | |
| virtual const opencascade::handle< Standard_Type > & | DynamicType () const |
| Returns a type descriptor about this object. More... | |
| Standard_Boolean | IsInstance (const opencascade::handle< Standard_Type > &theType) const |
| Returns a true value if this is an instance of Type. More... | |
| Standard_Boolean | IsInstance (const Standard_CString theTypeName) const |
| Returns a true value if this is an instance of TypeName. More... | |
| Standard_Boolean | IsKind (const opencascade::handle< Standard_Type > &theType) const |
| Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More... | |
| Standard_Boolean | IsKind (const Standard_CString theTypeName) const |
| Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More... | |
| Standard_Transient * | This () const |
| Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero. More... | |
| Standard_Integer | GetRefCount () const |
| Get the reference counter of this object. More... | |
| void | IncrementRefCounter () const |
| Increments the reference counter of this object. More... | |
| Standard_Integer | DecrementRefCounter () const |
| Decrements the reference counter of this object; returns the decremented value. More... | |
Additional Inherited Members | |
| Public Types inherited from Standard_Transient | |
| typedef void | base_type |
| Returns a type descriptor about this object. More... | |
| Static Public Member Functions inherited from Standard_Transient | |
| static const char * | get_type_name () |
| Returns a type descriptor about this object. More... | |
| static const opencascade::handle< Standard_Type > & | get_type_descriptor () |
| Returns type descriptor of Standard_Transient class. More... | |
| Protected Attributes inherited from Geom_Conic | |
| gp_Ax2 | pos |
Detailed Description
Describes a circle in 3D space. A circle is defined by its radius and, as with any conic curve, is positioned in space with a right-handed coordinate system (gp_Ax2 object) where:
- the origin is the center of the circle, and
- the origin, "X Direction" and "Y Direction" define the plane of the circle. This coordinate system is the local coordinate system of the circle. The "main Direction" of this coordinate system is the vector normal to the plane of the circle. The axis, of which the origin and unit vector are respectively the origin and "main Direction" of the local coordinate system, is termed the "Axis" or "main Axis" of the circle. The "main Direction" of the local coordinate system gives an explicit orientation to the circle (definition of the trigonometric sense), determining the direction in which the parameter increases along the circle. The Geom_Circle circle is parameterized by an angle: P(U) = O + R*Cos(U)*XDir + R*Sin(U)*YDir, where:
- P is the point of parameter U,
- O, XDir and YDir are respectively the origin, "X Direction" and "Y Direction" of its local coordinate system,
- R is the radius of the circle. The "X Axis" of the local coordinate system therefore defines the origin of the parameter of the circle. The parameter is the angle with this "X Direction". A circle is a closed and periodic curve. The period is 2.*Pi and the parameter range is [ 0, 2.*Pi [.
Constructor & Destructor Documentation
◆ Geom_Circle() [1/2]
| Geom_Circle::Geom_Circle | ( | const gp_Circ & | C | ) |
Constructs a circle by conversion of the gp_Circ circle C.
◆ Geom_Circle() [2/2]
| Geom_Circle::Geom_Circle | ( | const gp_Ax2 & | A2, |
| const Standard_Real | Radius | ||
| ) |
Constructs a circle of radius Radius, where A2 locates the circle and defines its orientation in 3D space such that:
- the center of the circle is the origin of A2,
- the origin, "X Direction" and "Y Direction" of A2 define the plane of the circle,
- A2 is the local coordinate system of the circle. Note: It is possible to create a circle where Radius is equal to 0.0. raised if Radius < 0.
Member Function Documentation
◆ Circ()
| gp_Circ Geom_Circle::Circ | ( | ) | const |
returns the non transient circle from gp with the same geometric properties as <me>.
◆ Copy()
|
overridevirtual |
Creates a new object which is a copy of this circle.
Implements Geom_Geometry.
◆ D0()
|
overridevirtual |
Returns in P the point of parameter U. P = C + R * Cos (U) * XDir + R * Sin (U) * YDir where C is the center of the circle , XDir the XDirection and YDir the YDirection of the circle's local coordinate system.
Implements Geom_Curve.
◆ D1()
|
overridevirtual |
Returns the point P of parameter U and the first derivative V1.
Implements Geom_Curve.
◆ D2()
|
overridevirtual |
Returns the point P of parameter U, the first and second derivatives V1 and V2.
Implements Geom_Curve.
◆ D3()
|
overridevirtual |
Returns the point P of parameter u, the first second and third derivatives V1 V2 and V3.
Implements Geom_Curve.
◆ DN()
|
overridevirtual |
The returned vector gives the value of the derivative for the order of derivation N. Raised if N < 1.
Implements Geom_Curve.
◆ Eccentricity()
|
overridevirtual |
Returns the eccentricity e = 0 for a circle.
Implements Geom_Conic.
◆ FirstParameter()
|
overridevirtual |
Returns the value of the first parameter of this circle. This is 0.0, which gives the start point of this circle, or The start point and end point of a circle are coincident.
Implements Geom_Curve.
◆ IsClosed()
|
overridevirtual |
returns True.
Implements Geom_Curve.
◆ IsPeriodic()
|
overridevirtual |
returns True.
Implements Geom_Curve.
◆ LastParameter()
|
overridevirtual |
Returns the value of the last parameter of this circle. This is 2.*Pi, which gives the end point of this circle. The start point and end point of a circle are coincident.
Implements Geom_Curve.
◆ Radius()
| Standard_Real Geom_Circle::Radius | ( | ) | const |
Returns the radius of this circle.
◆ ReversedParameter()
|
overridevirtual |
Computes the parameter on the reversed circle for the point of parameter U on this circle. For a circle, the returned value is: 2.*Pi - U.
Implements Geom_Conic.
◆ SetCirc()
| void Geom_Circle::SetCirc | ( | const gp_Circ & | C | ) |
Set <me> so that <me> has the same geometric properties as C.
◆ SetRadius()
| void Geom_Circle::SetRadius | ( | const Standard_Real | R | ) |
Assigns the value R to the radius of this circle. Note: it is possible to have a circle with a radius equal to 0.0. Exceptions - Standard_ConstructionError if R is negative.
◆ Transform()
|
overridevirtual |
Applies the transformation T to this circle.
Implements Geom_Geometry.
The documentation for this class was generated from the following file:
