This class defines graphic attributes for opaque 3d primitives (polygons, triangles, quadrilaterals). More...

#include <Graphic3d_AspectFillArea3d.hxx>

Inheritance diagram for Graphic3d_AspectFillArea3d:

Public Member Functions
	Graphic3d_AspectFillArea3d ()
	Creates a context table for fill area primitives defined with the following default values: More...

	Graphic3d_AspectFillArea3d (const Aspect_InteriorStyle theInterior, const Quantity_Color &theInteriorColor, const Quantity_Color &theEdgeColor, const Aspect_TypeOfLine theEdgeLineType, const Standard_Real theEdgeWidth, const Graphic3d_MaterialAspect &theFrontMaterial, const Graphic3d_MaterialAspect &theBackMaterial)
	Creates a context table for fill area primitives defined with the specified values. Display of back-facing filled polygons. No distinction between external and internal faces of FillAreas. The edges are not drawn. Polygon offset parameters: mode = Aspect_POM_None, factor = 1., units = 0. More...

Aspect_InteriorStyle	InteriorStyle () const
	Return interior rendering style (Aspect_IS_EMPTY by default, which means nothing will be rendered!). More...

void	SetInteriorStyle (const Aspect_InteriorStyle theStyle)
	Modifies the interior type used for rendering. More...

Graphic3d_TypeOfShadingModel	ShadingModel () const
	Returns shading model (Graphic3d_TOSM_DEFAULT by default, which means that Shading Model set as default for entire Viewer will be used) More...

void	SetShadingModel (const Graphic3d_TypeOfShadingModel theShadingModel)
	Sets shading model. More...

Graphic3d_AlphaMode	AlphaMode () const
	Returns the way how alpha value should be treated (Graphic3d_AlphaMode_BlendAuto by default, for backward compatibility). More...

Standard_ShortReal	AlphaCutoff () const
	Returns alpha cutoff threshold, for discarding fragments within Graphic3d_AlphaMode_Mask mode (0.5 by default). If the alpha value is greater than or equal to this value then it is rendered as fully opaque, otherwise, it is rendered as fully transparent. More...

void	SetAlphaMode (Graphic3d_AlphaMode theMode, Standard_ShortReal theAlphaCutoff=0.5f)
	Defines the way how alpha value should be treated. More...

const Quantity_Color &	InteriorColor () const
	Return interior color. More...

const Quantity_ColorRGBA &	InteriorColorRGBA () const
	Return interior color. More...

void	SetInteriorColor (const Quantity_Color &theColor)
	Modifies the color of the interior of the face. More...

void	SetInteriorColor (const Quantity_ColorRGBA &theColor)
	Modifies the color of the interior of the face. More...

const Quantity_Color &	BackInteriorColor () const
	Return back interior color. More...

const Quantity_ColorRGBA &	BackInteriorColorRGBA () const
	Return back interior color. More...

void	SetBackInteriorColor (const Quantity_Color &theColor)
	Modifies the color of the interior of the back face. More...

void	SetBackInteriorColor (const Quantity_ColorRGBA &theColor)
	Modifies the color of the interior of the back face. More...

const Graphic3d_MaterialAspect &	FrontMaterial () const
	Returns the surface material of external faces. More...

Graphic3d_MaterialAspect &	ChangeFrontMaterial ()
	Returns the surface material of external faces. More...

void	SetFrontMaterial (const Graphic3d_MaterialAspect &theMaterial)
	Modifies the surface material of external faces. More...

const Graphic3d_MaterialAspect &	BackMaterial () const
	Returns the surface material of internal faces. More...

Graphic3d_MaterialAspect &	ChangeBackMaterial ()
	Returns the surface material of internal faces. More...

void	SetBackMaterial (const Graphic3d_MaterialAspect &theMaterial)
	Modifies the surface material of internal faces. More...

bool	ToSuppressBackFaces () const
	Returns true if back faces should be suppressed (true by default). More...

void	SetSuppressBackFaces (bool theToSuppress)
	Assign back faces culling flag. More...

bool	BackFace () const
	Returns true if back faces should be suppressed (true by default). More...

void	AllowBackFace ()
	Allows the display of back-facing filled polygons. More...

void	SuppressBackFace ()
	Suppress the display of back-facing filled polygons. A back-facing polygon is defined as a polygon whose vertices are in a clockwise order with respect to screen coordinates. More...

bool	Distinguish () const
	Returns true if material properties should be distinguished for back and front faces (false by default). More...

void	SetDistinguish (bool toDistinguish)
	Set material distinction between front and back faces. More...

void	SetDistinguishOn ()
	Allows material distinction between front and back faces. More...

void	SetDistinguishOff ()
	Forbids material distinction between front and back faces. More...

const Handle< Graphic3d_ShaderProgram > &	ShaderProgram () const
	Return shader program. More...

void	SetShaderProgram (const Handle< Graphic3d_ShaderProgram > &theProgram)
	Sets up OpenGL/GLSL shader program. More...

const Handle< Graphic3d_TextureSet > &	TextureSet () const
	Return texture array to be mapped. More...

void	SetTextureSet (const Handle< Graphic3d_TextureSet > &theTextures)
	Setup texture array to be mapped. More...

Handle< Graphic3d_TextureMap >	TextureMap () const
	Return texture to be mapped. More...

void	SetTextureMap (const Handle< Graphic3d_TextureMap > &theTexture)
	Assign texture to be mapped. See also SetTextureMapOn() to actually activate texture mapping. More...

bool	ToMapTexture () const
	Return true if texture mapping is enabled (false by default). More...

bool	TextureMapState () const
	Return true if texture mapping is enabled (false by default). More...

void	SetTextureMapOn (bool theToMap)
	Enable or disable texture mapping (has no effect if texture is not set). More...

void	SetTextureMapOn ()
	Enable texture mapping (has no effect if texture is not set). More...

void	SetTextureMapOff ()
	Disable texture mapping. More...

const Graphic3d_PolygonOffset &	PolygonOffset () const
	Returns current polygon offsets settings. More...

void	PolygonOffsets (Standard_Integer &theMode, Standard_ShortReal &theFactor, Standard_ShortReal &theUnits) const
	Returns current polygon offsets settings. More...

void	SetPolygonOffsets (const Standard_Integer theMode, const Standard_ShortReal theFactor=1.0f, const Standard_ShortReal theUnits=0.0f)
	Sets up OpenGL polygon offsets mechanism. <aMode> parameter can contain various combinations of Aspect_PolygonOffsetMode enumeration elements (Aspect_POM_None means that polygon offsets are not changed). If <aMode> is different from Aspect_POM_Off and Aspect_POM_None, then <aFactor> and <aUnits> arguments are used by graphic renderer to calculate a depth offset value: More...

bool	ToDrawEdges () const
	Returns true if edges should be drawn (false by default). More...

void	SetDrawEdges (bool theToDraw)
	Set if edges should be drawn or not. More...

bool	Edge () const
	Returns true if edges should be drawn. More...

void	SetEdgeOn ()
	The edges of FillAreas are drawn. More...

void	SetEdgeOff ()
	The edges of FillAreas are not drawn. More...

const Quantity_Color &	EdgeColor () const
	Return color of edges. More...

const Quantity_ColorRGBA &	EdgeColorRGBA () const
	Return color of edges. More...

void	SetEdgeColor (const Quantity_Color &theColor)
	Modifies the color of the edge of the face. More...

Aspect_TypeOfLine	EdgeLineType () const
	Return edges line type. More...

void	SetEdgeLineType (const Aspect_TypeOfLine theType)
	Modifies the edge line type. More...

Standard_ShortReal	EdgeWidth () const
	Return width for edges in pixels. More...

void	SetEdgeWidth (const Standard_Real theWidth)
	Modifies the edge thickness Warning: Raises AspectFillAreaDefinitionError if the width is a negative value. More...

const Handle< Graphic3d_HatchStyle > &	HatchStyle () const
	Returns the hatch type used when InteriorStyle is IS_HATCH. More...

void	SetHatchStyle (const Handle< Graphic3d_HatchStyle > &theStyle)
	Modifies the hatch type used when InteriorStyle is IS_HATCH. More...

void	SetHatchStyle (const Aspect_HatchStyle theStyle)
	Modifies the hatch type used when InteriorStyle is IS_HATCH. More...

	Standard_DEPRECATED ("Deprecated method Values() should be replaced by individual property getters") void Values(Aspect_InteriorStyle &theStyle
	Returns the current values. More...

	Standard_DEPRECATED ("Deprecated method Values() should be replaced by individual property getters") void Values(Aspect_InteriorStyle &theStyle
	Returns the current values. More...

Public Member Functions inherited from Standard_Transient
	Standard_Transient ()
	Empty constructor. More...

	Standard_Transient (const Standard_Transient &)
	Copy constructor – does nothing. More...

Standard_Transient &	operator= (const Standard_Transient &)
	Assignment operator, needed to avoid copying reference counter. More...

virtual	~Standard_Transient ()
	Destructor must be virtual. More...

virtual void	Delete () const
	Memory deallocator for transient classes. More...

virtual const opencascade::handle< Standard_Type > &	DynamicType () const
	Returns a type descriptor about this object. More...

Standard_Boolean	IsInstance (const opencascade::handle< Standard_Type > &theType) const
	Returns a true value if this is an instance of Type. More...

Standard_Boolean	IsInstance (const Standard_CString theTypeName) const
	Returns a true value if this is an instance of TypeName. More...

Standard_Boolean	IsKind (const opencascade::handle< Standard_Type > &theType) const
	Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...

Standard_Boolean	IsKind (const Standard_CString theTypeName) const
	Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...

Standard_Transient *	This () const
	Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero. More...

Standard_Integer	GetRefCount () const
	Get the reference counter of this object. More...

void	IncrementRefCounter () const
	Increments the reference counter of this object. More...

Standard_Integer	DecrementRefCounter () const
	Decrements the reference counter of this object; returns the decremented value. More...

Data Fields
Quantity_Color &	theIntColor

Quantity_Color Quantity_Color &	theEdgeColor

Quantity_Color Quantity_Color Aspect_TypeOfLine &	theType

Quantity_Color Quantity_Color Aspect_TypeOfLine Standard_Real &theWidth	const

	theIntColor = myInteriorColor.GetRGB()

	theEdgeColor = myEdgeColor.GetRGB()

	theType = myEdgeType

	theWidth = myEdgeWidth

Quantity_Color Quantity_Color &	theBackIntColor

Quantity_Color Quantity_Color Quantity_Color &	theEdgeColor

Quantity_Color Quantity_Color Quantity_Color Aspect_TypeOfLine &	theType

Quantity_Color Quantity_Color Quantity_Color Aspect_TypeOfLine Standard_Real &theWidth	const

	theBackIntColor = myBackInteriorColor.GetRGB()

Additional Inherited Members
Public Types inherited from Standard_Transient
typedef void	base_type
	Returns a type descriptor about this object. More...

Static Public Member Functions inherited from Standard_Transient
static const char *	get_type_name ()
	Returns a type descriptor about this object. More...

static const opencascade::handle< Standard_Type > &	get_type_descriptor ()
	Returns type descriptor of Standard_Transient class. More...

Detailed Description

This class defines graphic attributes for opaque 3d primitives (polygons, triangles, quadrilaterals).

Constructor & Destructor Documentation

◆ Graphic3d_AspectFillArea3d() [1/2]

Graphic3d_AspectFillArea3d::Graphic3d_AspectFillArea3d ( )

Creates a context table for fill area primitives defined with the following default values:

InteriorStyle : Aspect_IS_EMPTY InteriorColor : Quantity_NOC_CYAN1 EdgeColor : Quantity_NOC_WHITE EdgeLineType : Aspect_TOL_SOLID EdgeWidth : 1.0 FrontMaterial : NOM_BRASS BackMaterial : NOM_BRASS HatchStyle : Aspect_HS_SOLID

Display of back-facing filled polygons. No distinction between external and internal faces of FillAreas. The edges are not drawn. Polygon offset parameters: mode = Aspect_POM_None, factor = 1., units = 0.

◆ Graphic3d_AspectFillArea3d() [2/2]

Graphic3d_AspectFillArea3d::Graphic3d_AspectFillArea3d	(	const Aspect_InteriorStyle	theInterior,
		const Quantity_Color &	theInteriorColor,
		const Quantity_Color &	theEdgeColor,
		const Aspect_TypeOfLine	theEdgeLineType,
		const Standard_Real	theEdgeWidth,
		const Graphic3d_MaterialAspect &	theFrontMaterial,
		const Graphic3d_MaterialAspect &	theBackMaterial
	)

Creates a context table for fill area primitives defined with the specified values. Display of back-facing filled polygons. No distinction between external and internal faces of FillAreas. The edges are not drawn. Polygon offset parameters: mode = Aspect_POM_None, factor = 1., units = 0.

Member Function Documentation

◆ AllowBackFace()

void Graphic3d_AspectFillArea3d::AllowBackFace ( )

inline

Allows the display of back-facing filled polygons.

◆ AlphaCutoff()

Standard_ShortReal Graphic3d_AspectFillArea3d::AlphaCutoff ( ) const

inline

Returns alpha cutoff threshold, for discarding fragments within Graphic3d_AlphaMode_Mask mode (0.5 by default). If the alpha value is greater than or equal to this value then it is rendered as fully opaque, otherwise, it is rendered as fully transparent.

◆ AlphaMode()

Graphic3d_AlphaMode Graphic3d_AspectFillArea3d::AlphaMode ( ) const

inline

Returns the way how alpha value should be treated (Graphic3d_AlphaMode_BlendAuto by default, for backward compatibility).

◆ BackFace()

bool Graphic3d_AspectFillArea3d::BackFace ( ) const

inline

Returns true if back faces should be suppressed (true by default).

◆ BackInteriorColor()

const Quantity_Color& Graphic3d_AspectFillArea3d::BackInteriorColor ( ) const

inline

Return back interior color.

◆ BackInteriorColorRGBA()

const Quantity_ColorRGBA& Graphic3d_AspectFillArea3d::BackInteriorColorRGBA ( ) const

inline

Return back interior color.

◆ BackMaterial()

const Graphic3d_MaterialAspect& Graphic3d_AspectFillArea3d::BackMaterial ( ) const

inline

Returns the surface material of internal faces.

◆ ChangeBackMaterial()

Graphic3d_MaterialAspect& Graphic3d_AspectFillArea3d::ChangeBackMaterial ( )

inline

Returns the surface material of internal faces.

◆ ChangeFrontMaterial()

Graphic3d_MaterialAspect& Graphic3d_AspectFillArea3d::ChangeFrontMaterial ( )

inline

Returns the surface material of external faces.

◆ Distinguish()

bool Graphic3d_AspectFillArea3d::Distinguish ( ) const

inline

Returns true if material properties should be distinguished for back and front faces (false by default).

◆ Edge()

bool Graphic3d_AspectFillArea3d::Edge ( ) const

inline

Returns true if edges should be drawn.

◆ EdgeColor()

const Quantity_Color& Graphic3d_AspectFillArea3d::EdgeColor ( ) const

inline

Return color of edges.

◆ EdgeColorRGBA()

const Quantity_ColorRGBA& Graphic3d_AspectFillArea3d::EdgeColorRGBA ( ) const

inline

Return color of edges.

◆ EdgeLineType()

Aspect_TypeOfLine Graphic3d_AspectFillArea3d::EdgeLineType ( ) const

inline

Return edges line type.

◆ EdgeWidth()

Standard_ShortReal Graphic3d_AspectFillArea3d::EdgeWidth ( ) const

inline

Return width for edges in pixels.

◆ FrontMaterial()

const Graphic3d_MaterialAspect& Graphic3d_AspectFillArea3d::FrontMaterial ( ) const

inline

Returns the surface material of external faces.

◆ HatchStyle()

const Handle< Graphic3d_HatchStyle >& Graphic3d_AspectFillArea3d::HatchStyle ( ) const

inline

Returns the hatch type used when InteriorStyle is IS_HATCH.

◆ InteriorColor()

const Quantity_Color& Graphic3d_AspectFillArea3d::InteriorColor ( ) const

inline

Return interior color.

◆ InteriorColorRGBA()

const Quantity_ColorRGBA& Graphic3d_AspectFillArea3d::InteriorColorRGBA ( ) const

inline

Return interior color.

◆ InteriorStyle()

Aspect_InteriorStyle Graphic3d_AspectFillArea3d::InteriorStyle ( ) const

inline

Return interior rendering style (Aspect_IS_EMPTY by default, which means nothing will be rendered!).

◆ PolygonOffset()

const Graphic3d_PolygonOffset& Graphic3d_AspectFillArea3d::PolygonOffset ( ) const

inline

Returns current polygon offsets settings.

◆ PolygonOffsets()

void Graphic3d_AspectFillArea3d::PolygonOffsets	(	Standard_Integer &	theMode,
		Standard_ShortReal &	theFactor,
		Standard_ShortReal &	theUnits
	)		const

inline

Returns current polygon offsets settings.

◆ SetAlphaMode()

void Graphic3d_AspectFillArea3d::SetAlphaMode	(	Graphic3d_AlphaMode	theMode,
		Standard_ShortReal	theAlphaCutoff = `0.5f`
	)

inline

Defines the way how alpha value should be treated.

◆ SetBackInteriorColor() [1/2]

void Graphic3d_AspectFillArea3d::SetBackInteriorColor ( const Quantity_Color & theColor )

inline

Modifies the color of the interior of the back face.

◆ SetBackInteriorColor() [2/2]

void Graphic3d_AspectFillArea3d::SetBackInteriorColor ( const Quantity_ColorRGBA & theColor )

inline

Modifies the color of the interior of the back face.

◆ SetBackMaterial()

void Graphic3d_AspectFillArea3d::SetBackMaterial ( const Graphic3d_MaterialAspect & theMaterial )

inline

Modifies the surface material of internal faces.

◆ SetDistinguish()

void Graphic3d_AspectFillArea3d::SetDistinguish ( bool toDistinguish )

inline

Set material distinction between front and back faces.

◆ SetDistinguishOff()

void Graphic3d_AspectFillArea3d::SetDistinguishOff ( )

inline

Forbids material distinction between front and back faces.

◆ SetDistinguishOn()

void Graphic3d_AspectFillArea3d::SetDistinguishOn ( )

inline

Allows material distinction between front and back faces.

◆ SetDrawEdges()

void Graphic3d_AspectFillArea3d::SetDrawEdges ( bool theToDraw )

inline

Set if edges should be drawn or not.

◆ SetEdgeColor()

void Graphic3d_AspectFillArea3d::SetEdgeColor ( const Quantity_Color & theColor )

inline

Modifies the color of the edge of the face.

◆ SetEdgeLineType()

void Graphic3d_AspectFillArea3d::SetEdgeLineType ( const Aspect_TypeOfLine theType )

inline

Modifies the edge line type.

◆ SetEdgeOff()

void Graphic3d_AspectFillArea3d::SetEdgeOff ( )

inline

The edges of FillAreas are not drawn.

◆ SetEdgeOn()

void Graphic3d_AspectFillArea3d::SetEdgeOn ( )

inline

The edges of FillAreas are drawn.

◆ SetEdgeWidth()

void Graphic3d_AspectFillArea3d::SetEdgeWidth ( const Standard_Real theWidth )

inline

Modifies the edge thickness Warning: Raises AspectFillAreaDefinitionError if the width is a negative value.

◆ SetFrontMaterial()

void Graphic3d_AspectFillArea3d::SetFrontMaterial ( const Graphic3d_MaterialAspect & theMaterial )

inline

Modifies the surface material of external faces.

◆ SetHatchStyle() [1/2]

void Graphic3d_AspectFillArea3d::SetHatchStyle ( const Handle< Graphic3d_HatchStyle > & theStyle )

inline

Modifies the hatch type used when InteriorStyle is IS_HATCH.

◆ SetHatchStyle() [2/2]

void Graphic3d_AspectFillArea3d::SetHatchStyle ( const Aspect_HatchStyle theStyle )

inline

Modifies the hatch type used when InteriorStyle is IS_HATCH.

Warning: This method always creates a new handle for a given hatch style

◆ SetInteriorColor() [1/2]

void Graphic3d_AspectFillArea3d::SetInteriorColor ( const Quantity_Color & theColor )

inline

Modifies the color of the interior of the face.

◆ SetInteriorColor() [2/2]

void Graphic3d_AspectFillArea3d::SetInteriorColor ( const Quantity_ColorRGBA & theColor )

inline

Modifies the color of the interior of the face.

◆ SetInteriorStyle()

void Graphic3d_AspectFillArea3d::SetInteriorStyle ( const Aspect_InteriorStyle theStyle )

inline

Modifies the interior type used for rendering.

◆ SetPolygonOffsets()

void Graphic3d_AspectFillArea3d::SetPolygonOffsets	(	const Standard_Integer	theMode,
		const Standard_ShortReal	theFactor = `1.0f`,
		const Standard_ShortReal	theUnits = `0.0f`
	)

inline

Sets up OpenGL polygon offsets mechanism. <aMode> parameter can contain various combinations of Aspect_PolygonOffsetMode enumeration elements (Aspect_POM_None means that polygon offsets are not changed). If <aMode> is different from Aspect_POM_Off and Aspect_POM_None, then <aFactor> and <aUnits> arguments are used by graphic renderer to calculate a depth offset value:

offset = <aFactor> * m + <aUnits> * r, where m - maximum depth slope for the polygon currently being displayed, r - minimum window coordinates depth resolution (implementation-specific)

Default settings for OCC 3D viewer: mode = Aspect_POM_Fill, factor = 1., units = 0.

Negative offset values move polygons closer to the viewport, while positive values shift polygons away. Consult OpenGL reference for details (glPolygonOffset function description).

◆ SetShaderProgram()

void Graphic3d_AspectFillArea3d::SetShaderProgram ( const Handle< Graphic3d_ShaderProgram > & theProgram )

inline

Sets up OpenGL/GLSL shader program.

◆ SetShadingModel()

void Graphic3d_AspectFillArea3d::SetShadingModel ( const Graphic3d_TypeOfShadingModel theShadingModel )

inline

Sets shading model.

◆ SetSuppressBackFaces()

void Graphic3d_AspectFillArea3d::SetSuppressBackFaces ( bool theToSuppress )

inline

Assign back faces culling flag.

◆ SetTextureMap()

void Graphic3d_AspectFillArea3d::SetTextureMap ( const Handle< Graphic3d_TextureMap > & theTexture )

Assign texture to be mapped. See also SetTextureMapOn() to actually activate texture mapping.

◆ SetTextureMapOff()

void Graphic3d_AspectFillArea3d::SetTextureMapOff ( )

inline

Disable texture mapping.

◆ SetTextureMapOn() [1/2]

void Graphic3d_AspectFillArea3d::SetTextureMapOn ( bool theToMap )

inline

Enable or disable texture mapping (has no effect if texture is not set).

◆ SetTextureMapOn() [2/2]

void Graphic3d_AspectFillArea3d::SetTextureMapOn ( )

inline

Enable texture mapping (has no effect if texture is not set).

◆ SetTextureSet()

void Graphic3d_AspectFillArea3d::SetTextureSet ( const Handle< Graphic3d_TextureSet > & theTextures )

inline

Setup texture array to be mapped.

◆ ShaderProgram()

const Handle< Graphic3d_ShaderProgram >& Graphic3d_AspectFillArea3d::ShaderProgram ( ) const

inline

Return shader program.

◆ ShadingModel()

Graphic3d_TypeOfShadingModel Graphic3d_AspectFillArea3d::ShadingModel ( ) const

inline

Returns shading model (Graphic3d_TOSM_DEFAULT by default, which means that Shading Model set as default for entire Viewer will be used)

◆ Standard_DEPRECATED() [1/2]

Graphic3d_AspectFillArea3d::Standard_DEPRECATED ( "Deprecated method Values() should be replaced by individual property getters" ) &

Returns the current values.

◆ Standard_DEPRECATED() [2/2]

Graphic3d_AspectFillArea3d::Standard_DEPRECATED ( "Deprecated method Values() should be replaced by individual property getters" ) &

Returns the current values.

◆ SuppressBackFace()

void Graphic3d_AspectFillArea3d::SuppressBackFace ( )

inline

Suppress the display of back-facing filled polygons. A back-facing polygon is defined as a polygon whose vertices are in a clockwise order with respect to screen coordinates.

◆ TextureMap()

Handle< Graphic3d_TextureMap > Graphic3d_AspectFillArea3d::TextureMap ( ) const

inline

Return texture to be mapped.

◆ TextureMapState()

bool Graphic3d_AspectFillArea3d::TextureMapState ( ) const

inline

Return true if texture mapping is enabled (false by default).

◆ TextureSet()

const Handle< Graphic3d_TextureSet >& Graphic3d_AspectFillArea3d::TextureSet ( ) const

inline

Return texture array to be mapped.

◆ ToDrawEdges()

bool Graphic3d_AspectFillArea3d::ToDrawEdges ( ) const

inline

Returns true if edges should be drawn (false by default).

◆ ToMapTexture()

bool Graphic3d_AspectFillArea3d::ToMapTexture ( ) const

inline

Return true if texture mapping is enabled (false by default).

◆ ToSuppressBackFaces()

bool Graphic3d_AspectFillArea3d::ToSuppressBackFaces ( ) const

inline

Returns true if back faces should be suppressed (true by default).

Field Documentation

◆ const [1/2]

Quantity_Color Quantity_Color Aspect_TypeOfLine Standard_Real& theWidth Graphic3d_AspectFillArea3d::const

Initial value:

{

theStyle = myInteriorStyle

◆ const [2/2]

Quantity_Color Quantity_Color Quantity_Color Aspect_TypeOfLine Standard_Real& theWidth Graphic3d_AspectFillArea3d::const

Initial value:

{

theStyle = myInteriorStyle

◆ myAlphaCutoff

Standard_ShortReal Graphic3d_AspectFillArea3d::myAlphaCutoff

protected

◆ myAlphaMode

Graphic3d_AlphaMode Graphic3d_AspectFillArea3d::myAlphaMode

protected

◆ myBackInteriorColor

Quantity_ColorRGBA Graphic3d_AspectFillArea3d::myBackInteriorColor

protected

◆ myBackMaterial

Graphic3d_MaterialAspect Graphic3d_AspectFillArea3d::myBackMaterial

protected

◆ myEdgeColor

Quantity_ColorRGBA Graphic3d_AspectFillArea3d::myEdgeColor

protected

◆ myEdgeType

Aspect_TypeOfLine Graphic3d_AspectFillArea3d::myEdgeType

protected

◆ myEdgeWidth

Standard_ShortReal Graphic3d_AspectFillArea3d::myEdgeWidth

protected

◆ myFrontMaterial

Graphic3d_MaterialAspect Graphic3d_AspectFillArea3d::myFrontMaterial

protected

◆ myHatchStyle

Handle< Graphic3d_HatchStyle > Graphic3d_AspectFillArea3d::myHatchStyle

protected

◆ myInteriorColor

Quantity_ColorRGBA Graphic3d_AspectFillArea3d::myInteriorColor

protected

◆ myInteriorStyle

Aspect_InteriorStyle Graphic3d_AspectFillArea3d::myInteriorStyle

protected

◆ myPolygonOffset

Graphic3d_PolygonOffset Graphic3d_AspectFillArea3d::myPolygonOffset

protected

◆ myProgram

Handle< Graphic3d_ShaderProgram > Graphic3d_AspectFillArea3d::myProgram

protected

◆ myShadingModel

Graphic3d_TypeOfShadingModel Graphic3d_AspectFillArea3d::myShadingModel

protected

◆ myTextureSet

Handle< Graphic3d_TextureSet > Graphic3d_AspectFillArea3d::myTextureSet

protected

◆ myToDistinguishMaterials

bool Graphic3d_AspectFillArea3d::myToDistinguishMaterials

protected

◆ myToDrawEdges

bool Graphic3d_AspectFillArea3d::myToDrawEdges

protected

◆ myToMapTexture

bool Graphic3d_AspectFillArea3d::myToMapTexture

protected

◆ myToSuppressBackFaces

bool Graphic3d_AspectFillArea3d::myToSuppressBackFaces

protected

◆ theBackIntColor [1/2]

Quantity_Color Quantity_Color& Graphic3d_AspectFillArea3d::theBackIntColor

◆ theBackIntColor [2/2]

Graphic3d_AspectFillArea3d::theBackIntColor = myBackInteriorColor.GetRGB()

◆ theEdgeColor [1/3]

Quantity_Color Quantity_Color& Graphic3d_AspectFillArea3d::theEdgeColor

◆ theEdgeColor [2/3]

Graphic3d_AspectFillArea3d::theEdgeColor = myEdgeColor.GetRGB()

◆ theEdgeColor [3/3]

Quantity_Color Quantity_Color Quantity_Color& Graphic3d_AspectFillArea3d::theEdgeColor

◆ theIntColor [1/2]

Quantity_Color & Graphic3d_AspectFillArea3d::theIntColor

◆ theIntColor [2/2]

Graphic3d_AspectFillArea3d::theIntColor = myInteriorColor.GetRGB()

◆ theType [1/3]

Quantity_Color Quantity_Color Aspect_TypeOfLine& Graphic3d_AspectFillArea3d::theType

◆ theType [2/3]

Graphic3d_AspectFillArea3d::theType = myEdgeType

◆ theType [3/3]

Quantity_Color Quantity_Color Quantity_Color Aspect_TypeOfLine& Graphic3d_AspectFillArea3d::theType

◆ theWidth

Graphic3d_AspectFillArea3d::theWidth = myEdgeWidth

The documentation for this class was generated from the following file:

Graphic3d_AspectFillArea3d.hxx

Protected Attributes
Handle< Graphic3d_ShaderProgram >	myProgram

Handle< Graphic3d_TextureSet >	myTextureSet

Graphic3d_MaterialAspect	myFrontMaterial

Graphic3d_MaterialAspect	myBackMaterial

Quantity_ColorRGBA	myInteriorColor

Quantity_ColorRGBA	myBackInteriorColor

Quantity_ColorRGBA	myEdgeColor

Aspect_InteriorStyle	myInteriorStyle

Graphic3d_TypeOfShadingModel	myShadingModel

Graphic3d_AlphaMode	myAlphaMode

Standard_ShortReal	myAlphaCutoff

Aspect_TypeOfLine	myEdgeType

Standard_ShortReal	myEdgeWidth

Handle< Graphic3d_HatchStyle >	myHatchStyle

Graphic3d_PolygonOffset	myPolygonOffset

bool	myToDistinguishMaterials

bool	myToDrawEdges

bool	myToSuppressBackFaces

bool	myToMapTexture

Graphic3d_AspectFillArea3d Class Reference

Public Member Functions

Data Fields

Protected Attributes

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ Graphic3d_AspectFillArea3d() [1/2]

◆ Graphic3d_AspectFillArea3d() [2/2]

Member Function Documentation

◆ AllowBackFace()

◆ AlphaCutoff()

◆ AlphaMode()

◆ BackFace()

◆ BackInteriorColor()

◆ BackInteriorColorRGBA()

◆ BackMaterial()

◆ ChangeBackMaterial()

◆ ChangeFrontMaterial()

◆ Distinguish()

◆ Edge()

◆ EdgeColor()

◆ EdgeColorRGBA()

◆ EdgeLineType()

◆ EdgeWidth()

◆ FrontMaterial()

◆ HatchStyle()

◆ InteriorColor()

◆ InteriorColorRGBA()

◆ InteriorStyle()

◆ PolygonOffset()

◆ PolygonOffsets()

◆ SetAlphaMode()

◆ SetBackInteriorColor() [1/2]

◆ SetBackInteriorColor() [2/2]

◆ SetBackMaterial()

◆ SetDistinguish()

◆ SetDistinguishOff()

◆ SetDistinguishOn()

◆ SetDrawEdges()

◆ SetEdgeColor()

◆ SetEdgeLineType()

◆ SetEdgeOff()

◆ SetEdgeOn()

◆ SetEdgeWidth()

◆ SetFrontMaterial()

◆ SetHatchStyle() [1/2]

◆ SetHatchStyle() [2/2]

◆ SetInteriorColor() [1/2]

◆ SetInteriorColor() [2/2]

◆ SetInteriorStyle()

◆ SetPolygonOffsets()

◆ SetShaderProgram()

◆ SetShadingModel()

◆ SetSuppressBackFaces()

◆ SetTextureMap()

◆ SetTextureMapOff()

◆ SetTextureMapOn() [1/2]

◆ SetTextureMapOn() [2/2]

◆ SetTextureSet()

◆ ShaderProgram()

◆ ShadingModel()

◆ Standard_DEPRECATED() [1/2]

◆ Standard_DEPRECATED() [2/2]

◆ SuppressBackFace()

◆ TextureMap()

◆ TextureMapState()

◆ TextureSet()

◆ ToDrawEdges()

◆ ToMapTexture()

◆ ToSuppressBackFaces()

Field Documentation

◆ const [1/2]

◆ const [2/2]

◆ myAlphaCutoff

◆ myAlphaMode

◆ myBackInteriorColor

◆ myBackMaterial

◆ myEdgeColor

◆ myEdgeType