Provides methods to transfer topologic curves entities from IGES to CASCADE. More...

#include <IGESToBRep_TopoCurve.hxx>

Inheritance diagram for IGESToBRep_TopoCurve:

Public Member Functions
	IGESToBRep_TopoCurve ()
	Creates a tool TopoCurve ready to run, with epsilons set to 1.E-04, TheModeTopo to True, the optimization of the continuity to False. More...

	IGESToBRep_TopoCurve (const IGESToBRep_CurveAndSurface &CS)
	Creates a tool TopoCurve ready to run and sets its fields as CS's. More...

	IGESToBRep_TopoCurve (const IGESToBRep_TopoCurve &CS)
	Creates a tool TopoCurve ready to run and sets its fields as CS's. More...

	IGESToBRep_TopoCurve (const Standard_Real eps, const Standard_Real epsGeom, const Standard_Real epsCoeff, const Standard_Boolean mode, const Standard_Boolean modeapprox, const Standard_Boolean optimized)
	Creates a tool TopoCurve ready to run. More...

TopoDS_Shape	TransferTopoCurve (const Handle< IGESData_IGESEntity > &start)

TopoDS_Shape	Transfer2dTopoCurve (const Handle< IGESData_IGESEntity > &start, const TopoDS_Face &face, const gp_Trsf2d &trans, const Standard_Real uFact)

TopoDS_Shape	TransferTopoBasicCurve (const Handle< IGESData_IGESEntity > &start)

TopoDS_Shape	Transfer2dTopoBasicCurve (const Handle< IGESData_IGESEntity > &start, const TopoDS_Face &face, const gp_Trsf2d &trans, const Standard_Real uFact)

TopoDS_Vertex	TransferPoint (const Handle< IGESGeom_Point > &start)

TopoDS_Vertex	Transfer2dPoint (const Handle< IGESGeom_Point > &start)

TopoDS_Shape	TransferCompositeCurve (const Handle< IGESGeom_CompositeCurve > &start)

TopoDS_Shape	Transfer2dCompositeCurve (const Handle< IGESGeom_CompositeCurve > &start, const TopoDS_Face &face, const gp_Trsf2d &trans, const Standard_Real uFact)

TopoDS_Shape	TransferOffsetCurve (const Handle< IGESGeom_OffsetCurve > &start)

TopoDS_Shape	Transfer2dOffsetCurve (const Handle< IGESGeom_OffsetCurve > &start, const TopoDS_Face &face, const gp_Trsf2d &trans, const Standard_Real uFact)

TopoDS_Shape	TransferCurveOnSurface (const Handle< IGESGeom_CurveOnSurface > &start)

TopoDS_Shape	TransferCurveOnFace (TopoDS_Face &face, const Handle< IGESGeom_CurveOnSurface > &start, const gp_Trsf2d &trans, const Standard_Real uFact, const Standard_Boolean IsCurv)
	Transfers a CurveOnSurface directly on a face to trim it. The CurveOnSurface have to be defined Outer or Inner. More...

TopoDS_Shape	TransferBoundary (const Handle< IGESGeom_Boundary > &start)

TopoDS_Shape	TransferBoundaryOnFace (TopoDS_Face &face, const Handle< IGESGeom_Boundary > &start, const gp_Trsf2d &trans, const Standard_Real uFact)
	Transfers a Boundary directly on a face to trim it. More...

void	ApproxBSplineCurve (const Handle< Geom_BSplineCurve > &start)

Standard_Integer	NbCurves () const
	Returns the count of Curves in "TheCurves". More...

Handle< Geom_Curve >	Curve (const Standard_Integer num=1) const
	Returns a Curve given its rank, by default the first one (null Curvee if out of range) in "TheCurves". More...

void	Approx2dBSplineCurve (const Handle< Geom2d_BSplineCurve > &start)

Standard_Integer	NbCurves2d () const
	Returns the count of Curves in "TheCurves2d". More...

Handle< Geom2d_Curve >	Curve2d (const Standard_Integer num=1) const
	Returns a Curve given its rank, by default the first one (null Curvee if out of range) in "TheCurves2d". More...

void	SetBadCase (const Standard_Boolean value)
	Sets TheBadCase flag. More...

Standard_Boolean	BadCase () const
	Returns TheBadCase flag. More...

Public Member Functions inherited from IGESToBRep_CurveAndSurface
	IGESToBRep_CurveAndSurface ()
	Creates a tool CurveAndSurface ready to run, with epsilons set to 1.E-04, myModeTopo to True, the optimization of the continuity to False. More...

	IGESToBRep_CurveAndSurface (const IGESToBRep_CurveAndSurface &CS)
	Creates a tool CurveAndSurface ready to run and sets its fields as CS's. More...

	IGESToBRep_CurveAndSurface (const Standard_Real eps, const Standard_Real epsGeom, const Standard_Real epsCoeff, const Standard_Boolean mode, const Standard_Boolean modeapprox, const Standard_Boolean optimized)
	Creates a tool CurveAndSurface ready to run. More...

void	Init ()
	Initializes the field of the tool CurveAndSurface with default creating values. More...

void	SetEpsilon (const Standard_Real eps)
	Changes the value of "myEps". More...

Standard_Real	GetEpsilon () const
	Returns the value of "myEps". More...

void	SetEpsCoeff (const Standard_Real eps)
	Changes the value of "myEpsCoeff". More...

Standard_Real	GetEpsCoeff () const
	Returns the value of "myEpsCoeff". More...

void	SetEpsGeom (const Standard_Real eps)
	Changes the value of "myEpsGeom". More...

Standard_Real	GetEpsGeom () const
	Returns the value of "myEpsGeom". More...

void	SetMinTol (const Standard_Real mintol)
	Changes the value of "myMinTol". More...

void	SetMaxTol (const Standard_Real maxtol)
	Changes the value of "myMaxTol". More...

void	UpdateMinMaxTol ()
	Sets values of "myMinTol" and "myMaxTol" as follows myMaxTol = Max ("read.maxprecision.val", myEpsGeom * myUnitFactor) myMinTol = Precision::Confusion() Remark: This method is automatically invoked each time the values of "myEpsGeom" or "myUnitFactor" are changed. More...

Standard_Real	GetMinTol () const
	Returns the value of "myMinTol". More...

Standard_Real	GetMaxTol () const
	Returns the value of "myMaxTol". More...

void	SetModeApprox (const Standard_Boolean mode)
	Changes the value of "myModeApprox". More...

Standard_Boolean	GetModeApprox () const
	Returns the value of "myModeApprox". More...

void	SetModeTransfer (const Standard_Boolean mode)
	Changes the value of "myModeIsTopo". More...

Standard_Boolean	GetModeTransfer () const
	Returns the value of "myModeIsTopo". More...

void	SetOptimized (const Standard_Boolean optimized)
	Changes the value of "myContIsOpti". More...

Standard_Boolean	GetOptimized () const
	Returns the value of "myContIsOpti". More...

Standard_Real	GetUnitFactor () const
	Returns the value of " myUnitFactor". More...

void	SetSurfaceCurve (const Standard_Integer ival)
	Changes the value of "mySurfaceCurve". More...

Standard_Integer	GetSurfaceCurve () const
	Returns the value of " mySurfaceCurve" 0 = value in file , 2 = kepp 2d and compute 3d 3 = keep 3d and compute 2d. More...

void	SetModel (const Handle< IGESData_IGESModel > &model)
	Set the value of "myModel". More...

Handle< IGESData_IGESModel >	GetModel () const
	Returns the value of "myModel". More...

void	SetContinuity (const Standard_Integer continuity)
	Changes the value of "myContinuity" if continuity = 0 do nothing else if continuity = 1 try C1 if continuity = 2 try C2. More...

Standard_Integer	GetContinuity () const
	Returns the value of "myContinuity". More...

void	SetTransferProcess (const Handle< Transfer_TransientProcess > &TP)
	Set the value of "myMsgReg". More...

Handle< Transfer_TransientProcess >	GetTransferProcess () const
	Returns the value of "myMsgReg". More...

TopoDS_Shape	TransferCurveAndSurface (const Handle< IGESData_IGESEntity > &start)
	Returns the result of the transfert of any IGES Curve or Surface Entity. If the transfer has failed, this member return a NullEntity. More...

TopoDS_Shape	TransferGeometry (const Handle< IGESData_IGESEntity > &start)
	Returns the result of the transfert the geometry of any IGESEntity. If the transfer has failed, this member return a NullEntity. More...

void	SendFail (const Handle< IGESData_IGESEntity > &start, const Message_Msg &amsg)
	Records a new Fail message. More...

void	SendWarning (const Handle< IGESData_IGESEntity > &start, const Message_Msg &amsg)
	Records a new Warning message. More...

void	SendMsg (const Handle< IGESData_IGESEntity > &start, const Message_Msg &amsg)
	Records a new Information message from the definition of a Msg (Original+Value) More...

Standard_Boolean	HasShapeResult (const Handle< IGESData_IGESEntity > &start) const
	Returns True if start was already treated and has a result in "myMap" else returns False. More...

TopoDS_Shape	GetShapeResult (const Handle< IGESData_IGESEntity > &start) const
	Returns the result of the transfer of the IGESEntity "start" contained in "myMap" . (if HasShapeResult is True). More...

void	SetShapeResult (const Handle< IGESData_IGESEntity > &start, const TopoDS_Shape &result)
	set in "myMap" the result of the transfer of the IGESEntity "start". More...

Standard_Integer	NbShapeResult (const Handle< IGESData_IGESEntity > &start) const
	Returns the number of shapes results contained in "myMap" for the IGESEntity start ( type VertexList or EdgeList). More...

TopoDS_Shape	GetShapeResult (const Handle< IGESData_IGESEntity > &start, const Standard_Integer num) const
	Returns the numth result of the IGESEntity start (type VertexList or EdgeList) in "myMap". (if NbShapeResult is not null). More...

void	AddShapeResult (const Handle< IGESData_IGESEntity > &start, const TopoDS_Shape &result)
	set in "myMap" the result of the transfer of the entity of the IGESEntity start ( type VertexList or EdgeList). More...

void	SetSurface (const Handle< Geom_Surface > &theSurface)

Handle< Geom_Surface >	Surface () const

Standard_Real	GetUVResolution ()

Detailed Description

Provides methods to transfer topologic curves entities from IGES to CASCADE.

Constructor & Destructor Documentation

◆ IGESToBRep_TopoCurve() [1/4]

IGESToBRep_TopoCurve::IGESToBRep_TopoCurve ( )

Creates a tool TopoCurve ready to run, with epsilons set to 1.E-04, TheModeTopo to True, the optimization of the continuity to False.

◆ IGESToBRep_TopoCurve() [2/4]

IGESToBRep_TopoCurve::IGESToBRep_TopoCurve ( const IGESToBRep_CurveAndSurface & CS )

Creates a tool TopoCurve ready to run and sets its fields as CS's.

◆ IGESToBRep_TopoCurve() [3/4]

IGESToBRep_TopoCurve::IGESToBRep_TopoCurve ( const IGESToBRep_TopoCurve & CS )

Creates a tool TopoCurve ready to run and sets its fields as CS's.

◆ IGESToBRep_TopoCurve() [4/4]

IGESToBRep_TopoCurve::IGESToBRep_TopoCurve	(	const Standard_Real	eps,
		const Standard_Real	epsGeom,
		const Standard_Real	epsCoeff,
		const Standard_Boolean	mode,
		const Standard_Boolean	modeapprox,
		const Standard_Boolean	optimized
	)

Creates a tool TopoCurve ready to run.

Member Function Documentation

◆ Approx2dBSplineCurve()

void IGESToBRep_TopoCurve::Approx2dBSplineCurve ( const Handle< Geom2d_BSplineCurve > & start )

◆ ApproxBSplineCurve()

void IGESToBRep_TopoCurve::ApproxBSplineCurve ( const Handle< Geom_BSplineCurve > & start )

◆ BadCase()

Standard_Boolean IGESToBRep_TopoCurve::BadCase ( ) const

Returns TheBadCase flag.

◆ Curve()

Handle< Geom_Curve > IGESToBRep_TopoCurve::Curve ( const Standard_Integer num = 1 ) const

Returns a Curve given its rank, by default the first one (null Curvee if out of range) in "TheCurves".

◆ Curve2d()

Handle< Geom2d_Curve > IGESToBRep_TopoCurve::Curve2d ( const Standard_Integer num = 1 ) const

Returns a Curve given its rank, by default the first one (null Curvee if out of range) in "TheCurves2d".

◆ NbCurves()

Standard_Integer IGESToBRep_TopoCurve::NbCurves ( ) const

Returns the count of Curves in "TheCurves".

◆ NbCurves2d()

Standard_Integer IGESToBRep_TopoCurve::NbCurves2d ( ) const

Returns the count of Curves in "TheCurves2d".

◆ SetBadCase()

void IGESToBRep_TopoCurve::SetBadCase ( const Standard_Boolean value )

Sets TheBadCase flag.

◆ Transfer2dCompositeCurve()

TopoDS_Shape IGESToBRep_TopoCurve::Transfer2dCompositeCurve	(	const Handle< IGESGeom_CompositeCurve > &	start,
		const TopoDS_Face &	face,
		const gp_Trsf2d &	trans,
		const Standard_Real	uFact
	)

◆ Transfer2dOffsetCurve()

TopoDS_Shape IGESToBRep_TopoCurve::Transfer2dOffsetCurve	(	const Handle< IGESGeom_OffsetCurve > &	start,
		const TopoDS_Face &	face,
		const gp_Trsf2d &	trans,
		const Standard_Real	uFact
	)

◆ Transfer2dPoint()

TopoDS_Vertex IGESToBRep_TopoCurve::Transfer2dPoint ( const Handle< IGESGeom_Point > & start )

◆ Transfer2dTopoBasicCurve()

TopoDS_Shape IGESToBRep_TopoCurve::Transfer2dTopoBasicCurve	(	const Handle< IGESData_IGESEntity > &	start,
		const TopoDS_Face &	face,
		const gp_Trsf2d &	trans,
		const Standard_Real	uFact
	)

◆ Transfer2dTopoCurve()

TopoDS_Shape IGESToBRep_TopoCurve::Transfer2dTopoCurve	(	const Handle< IGESData_IGESEntity > &	start,
		const TopoDS_Face &	face,
		const gp_Trsf2d &	trans,
		const Standard_Real	uFact
	)

◆ TransferBoundary()

TopoDS_Shape IGESToBRep_TopoCurve::TransferBoundary ( const Handle< IGESGeom_Boundary > & start )

◆ TransferBoundaryOnFace()

TopoDS_Shape IGESToBRep_TopoCurve::TransferBoundaryOnFace	(	TopoDS_Face &	face,
		const Handle< IGESGeom_Boundary > &	start,
		const gp_Trsf2d &	trans,
		const Standard_Real	uFact
	)

Transfers a Boundary directly on a face to trim it.

◆ TransferCompositeCurve()

TopoDS_Shape IGESToBRep_TopoCurve::TransferCompositeCurve ( const Handle< IGESGeom_CompositeCurve > & start )

◆ TransferCurveOnFace()

TopoDS_Shape IGESToBRep_TopoCurve::TransferCurveOnFace	(	TopoDS_Face &	face,
		const Handle< IGESGeom_CurveOnSurface > &	start,
		const gp_Trsf2d &	trans,
		const Standard_Real	uFact,
		const Standard_Boolean	IsCurv
	)

Transfers a CurveOnSurface directly on a face to trim it. The CurveOnSurface have to be defined Outer or Inner.

◆ TransferCurveOnSurface()

TopoDS_Shape IGESToBRep_TopoCurve::TransferCurveOnSurface ( const Handle< IGESGeom_CurveOnSurface > & start )

◆ TransferOffsetCurve()

TopoDS_Shape IGESToBRep_TopoCurve::TransferOffsetCurve ( const Handle< IGESGeom_OffsetCurve > & start )

◆ TransferPoint()

TopoDS_Vertex IGESToBRep_TopoCurve::TransferPoint ( const Handle< IGESGeom_Point > & start )

◆ TransferTopoBasicCurve()

TopoDS_Shape IGESToBRep_TopoCurve::TransferTopoBasicCurve ( const Handle< IGESData_IGESEntity > & start )

◆ TransferTopoCurve()

TopoDS_Shape IGESToBRep_TopoCurve::TransferTopoCurve ( const Handle< IGESData_IGESEntity > & start )

The documentation for this class was generated from the following file:

IGESToBRep_TopoCurve.hxx

IGESToBRep_TopoCurve Class Reference

Public Member Functions