Auxiliary methods used in TopOpeBRepBuild_Builder1 class. More...

#include <TopOpeBRepBuild_Tools.hxx>

Static Public Member Functions
static void	FindState (const TopoDS_Shape &aVertex, const TopAbs_State aState, const TopAbs_ShapeEnum aShapeEnum, const TopTools_IndexedDataMapOfShapeListOfShape &aMapVertexEdges, TopTools_MapOfShape &aMapProcessedVertices, TopOpeBRepDS_DataMapOfShapeState &aMapVs)

static void	PropagateState (const TopOpeBRepDS_DataMapOfShapeState &aSplEdgesState, const TopTools_IndexedMapOfShape &anEdgesToRestMap, const TopAbs_ShapeEnum aShapeEnum1, const TopAbs_ShapeEnum aShapeEnum2, TopOpeBRepTool_ShapeClassifier &aShapeClassifier, TopOpeBRepDS_IndexedDataMapOfShapeWithState &aMapOfShapeWithState, const TopTools_MapOfShape &anUnkStateShapes)

static TopAbs_State	FindStateThroughVertex (const TopoDS_Shape &aShape, TopOpeBRepTool_ShapeClassifier &aShapeClassifier, TopOpeBRepDS_IndexedDataMapOfShapeWithState &aMapOfShapeWithState, const TopTools_MapOfShape &anAvoidSubshMap)

static void	PropagateStateForWires (const TopTools_IndexedMapOfShape &aFacesToRestMap, TopOpeBRepDS_IndexedDataMapOfShapeWithState &aMapOfShapeWithState)

static void	SpreadStateToChild (const TopoDS_Shape &aShape, const TopAbs_State aState, TopOpeBRepDS_IndexedDataMapOfShapeWithState &aMapOfShapeWithState)

static void	FindState1 (const TopoDS_Shape &anEdge, const TopAbs_State aState, const TopTools_IndexedDataMapOfShapeListOfShape &aMapEdgesFaces, TopTools_MapOfShape &aMapProcessedVertices, TopOpeBRepDS_DataMapOfShapeState &aMapVs)

static void	FindState2 (const TopoDS_Shape &anEdge, const TopAbs_State aState, const TopTools_IndexedDataMapOfShapeListOfShape &aMapEdgesFaces, TopTools_MapOfShape &aMapProcessedEdges, TopOpeBRepDS_DataMapOfShapeState &aMapVs)

static Standard_Boolean	GetAdjacentFace (const TopoDS_Shape &aFaceObj, const TopoDS_Shape &anEObj, const TopTools_IndexedDataMapOfShapeListOfShape &anEdgeFaceMap, TopoDS_Shape &anAdjFaceObj)

static void	GetNormalToFaceOnEdge (const TopoDS_Face &aFObj, const TopoDS_Edge &anEdgeObj, gp_Vec &aDirNormal)

static void	GetNormalInNearestPoint (const TopoDS_Face &aFace, const TopoDS_Edge &anEdge, gp_Vec &aNormal)
	This function used to compute normal in point which is located near the point with param UV (used for computation of normals where the normal in the point UV equal to zero). More...

static Standard_Boolean	GetTangentToEdgeEdge (const TopoDS_Face &aFObj, const TopoDS_Edge &anEdgeObj, const TopoDS_Edge &aOriEObj, gp_Vec &aTangent)

static Standard_Boolean	GetTangentToEdge (const TopoDS_Edge &anEdgeObj, gp_Vec &aTangent)

static void	UpdatePCurves (const TopoDS_Wire &aWire, const TopoDS_Face &fromFace, const TopoDS_Face &toFace)
	Recompute PCurves of the all edges from the wire on the <toFace> More...

static void	UpdateEdgeOnPeriodicalFace (const TopoDS_Edge &aEdgeToUpdate, const TopoDS_Face &OldFace, const TopoDS_Face &NewFace)
	recompute PCurves of the closing (SIM , with 2 PCurves) edge on the NewFace More...

static void	UpdateEdgeOnFace (const TopoDS_Edge &aEdgeToUpdate, const TopoDS_Face &OldFace, const TopoDS_Face &NewFace)
	recompute PCurve of the edge on the NewFace More...

static Standard_Boolean	IsDegEdgesTheSame (const TopoDS_Shape &anE1, const TopoDS_Shape &anE2)

static void	NormalizeFace (const TopoDS_Shape &oldFace, TopoDS_Shape &corrFace)
	test if <oldFace> does not contain INTERNAL or EXTERNAL edges and remove such edges in case of its presence. The result is stored in <corrFace> More...

static void	CorrectFace2d (const TopoDS_Shape &oldFace, TopoDS_Shape &corrFace, const TopTools_IndexedMapOfOrientedShape &aSourceShapes, TopTools_IndexedDataMapOfShapeShape &aMapOfCorrect2dEdges)
	test if UV representation of <oldFace> is good (i.e. face is closed in 2d). if face is not closed , this method will try to close such face and will return corrected edges in the <aMapOfCorrect2dEdges>. Parameter <aSourceShapes> used to fix the edge (or wires) which should be correct (Corrector used it as a start shapes). NOTE : Parameter corrFace doesn't mean anything. If you want to use this method , rebuild resulting face after by yourself using corrected edges. More...

static void	CorrectTolerances (const TopoDS_Shape &aS, const Standard_Real aTolMax=0.0001)

static void	CorrectCurveOnSurface (const TopoDS_Shape &aS, const Standard_Real aTolMax=0.0001)

static void	CorrectPointOnCurve (const TopoDS_Shape &aS, const Standard_Real aTolMax=0.0001)

static Standard_Boolean	CheckFaceClosed2d (const TopoDS_Face &theFace)
	Checks if <theFace> has the properly closed in 2D boundary(ies) More...

Detailed Description

Auxiliary methods used in TopOpeBRepBuild_Builder1 class.

Member Function Documentation

◆ CheckFaceClosed2d()

static Standard_Boolean TopOpeBRepBuild_Tools::CheckFaceClosed2d ( const TopoDS_Face & theFace )

static

Checks if <theFace> has the properly closed in 2D boundary(ies)

◆ CorrectCurveOnSurface()

static void TopOpeBRepBuild_Tools::CorrectCurveOnSurface	(	const TopoDS_Shape &	aS,
		const Standard_Real	aTolMax = `0.0001`
	)

static

◆ CorrectFace2d()

static void TopOpeBRepBuild_Tools::CorrectFace2d	(	const TopoDS_Shape &	oldFace,
		TopoDS_Shape &	corrFace,
		const TopTools_IndexedMapOfOrientedShape &	aSourceShapes,
		TopTools_IndexedDataMapOfShapeShape &	aMapOfCorrect2dEdges
	)

static

test if UV representation of <oldFace> is good (i.e. face is closed in 2d). if face is not closed , this method will try to close such face and will return corrected edges in the <aMapOfCorrect2dEdges>. Parameter <aSourceShapes> used to fix the edge (or wires) which should be correct (Corrector used it as a start shapes). NOTE : Parameter corrFace doesn't mean anything. If you want to use this method , rebuild resulting face after by yourself using corrected edges.

◆ CorrectPointOnCurve()

static void TopOpeBRepBuild_Tools::CorrectPointOnCurve	(	const TopoDS_Shape &	aS,
		const Standard_Real	aTolMax = `0.0001`
	)

static

◆ CorrectTolerances()

static void TopOpeBRepBuild_Tools::CorrectTolerances	(	const TopoDS_Shape &	aS,
		const Standard_Real	aTolMax = `0.0001`
	)

static

◆ FindState()

static void TopOpeBRepBuild_Tools::FindState	(	const TopoDS_Shape &	aVertex,
		const TopAbs_State	aState,
		const TopAbs_ShapeEnum	aShapeEnum,
		const TopTools_IndexedDataMapOfShapeListOfShape &	aMapVertexEdges,
		TopTools_MapOfShape &	aMapProcessedVertices,
		TopOpeBRepDS_DataMapOfShapeState &	aMapVs
	)

static

◆ FindState1()

static void TopOpeBRepBuild_Tools::FindState1	(	const TopoDS_Shape &	anEdge,
		const TopAbs_State	aState,
		const TopTools_IndexedDataMapOfShapeListOfShape &	aMapEdgesFaces,
		TopTools_MapOfShape &	aMapProcessedVertices,
		TopOpeBRepDS_DataMapOfShapeState &	aMapVs
	)

static

◆ FindState2()

static void TopOpeBRepBuild_Tools::FindState2	(	const TopoDS_Shape &	anEdge,
		const TopAbs_State	aState,
		const TopTools_IndexedDataMapOfShapeListOfShape &	aMapEdgesFaces,
		TopTools_MapOfShape &	aMapProcessedEdges,
		TopOpeBRepDS_DataMapOfShapeState &	aMapVs
	)

static

◆ FindStateThroughVertex()

static TopAbs_State TopOpeBRepBuild_Tools::FindStateThroughVertex	(	const TopoDS_Shape &	aShape,
		TopOpeBRepTool_ShapeClassifier &	aShapeClassifier,
		TopOpeBRepDS_IndexedDataMapOfShapeWithState &	aMapOfShapeWithState,
		const TopTools_MapOfShape &	anAvoidSubshMap
	)

static

◆ GetAdjacentFace()

static Standard_Boolean TopOpeBRepBuild_Tools::GetAdjacentFace	(	const TopoDS_Shape &	aFaceObj,
		const TopoDS_Shape &	anEObj,
		const TopTools_IndexedDataMapOfShapeListOfShape &	anEdgeFaceMap,
		TopoDS_Shape &	anAdjFaceObj
	)

static

◆ GetNormalInNearestPoint()

static void TopOpeBRepBuild_Tools::GetNormalInNearestPoint	(	const TopoDS_Face &	aFace,
		const TopoDS_Edge &	anEdge,
		gp_Vec &	aNormal
	)

static

This function used to compute normal in point which is located near the point with param UV (used for computation of normals where the normal in the point UV equal to zero).

◆ GetNormalToFaceOnEdge()

static void TopOpeBRepBuild_Tools::GetNormalToFaceOnEdge	(	const TopoDS_Face &	aFObj,
		const TopoDS_Edge &	anEdgeObj,
		gp_Vec &	aDirNormal
	)

static

◆ GetTangentToEdge()

static Standard_Boolean TopOpeBRepBuild_Tools::GetTangentToEdge	(	const TopoDS_Edge &	anEdgeObj,
		gp_Vec &	aTangent
	)

static

◆ GetTangentToEdgeEdge()

static Standard_Boolean TopOpeBRepBuild_Tools::GetTangentToEdgeEdge	(	const TopoDS_Face &	aFObj,
		const TopoDS_Edge &	anEdgeObj,
		const TopoDS_Edge &	aOriEObj,
		gp_Vec &	aTangent
	)

static

◆ IsDegEdgesTheSame()

static Standard_Boolean TopOpeBRepBuild_Tools::IsDegEdgesTheSame	(	const TopoDS_Shape &	anE1,
		const TopoDS_Shape &	anE2
	)

static

◆ NormalizeFace()

static void TopOpeBRepBuild_Tools::NormalizeFace	(	const TopoDS_Shape &	oldFace,
		TopoDS_Shape &	corrFace
	)

static

test if <oldFace> does not contain INTERNAL or EXTERNAL edges and remove such edges in case of its presence. The result is stored in <corrFace>

◆ PropagateState()

static void TopOpeBRepBuild_Tools::PropagateState	(	const TopOpeBRepDS_DataMapOfShapeState &	aSplEdgesState,
		const TopTools_IndexedMapOfShape &	anEdgesToRestMap,
		const TopAbs_ShapeEnum	aShapeEnum1,
		const TopAbs_ShapeEnum	aShapeEnum2,
		TopOpeBRepTool_ShapeClassifier &	aShapeClassifier,
		TopOpeBRepDS_IndexedDataMapOfShapeWithState &	aMapOfShapeWithState,
		const TopTools_MapOfShape &	anUnkStateShapes
	)

static

◆ PropagateStateForWires()

static void TopOpeBRepBuild_Tools::PropagateStateForWires	(	const TopTools_IndexedMapOfShape &	aFacesToRestMap,
		TopOpeBRepDS_IndexedDataMapOfShapeWithState &	aMapOfShapeWithState
	)

static

◆ SpreadStateToChild()

static void TopOpeBRepBuild_Tools::SpreadStateToChild	(	const TopoDS_Shape &	aShape,
		const TopAbs_State	aState,
		TopOpeBRepDS_IndexedDataMapOfShapeWithState &	aMapOfShapeWithState
	)

static

◆ UpdateEdgeOnFace()

static void TopOpeBRepBuild_Tools::UpdateEdgeOnFace	(	const TopoDS_Edge &	aEdgeToUpdate,
		const TopoDS_Face &	OldFace,
		const TopoDS_Face &	NewFace
	)

static

recompute PCurve of the edge on the NewFace

◆ UpdateEdgeOnPeriodicalFace()

static void TopOpeBRepBuild_Tools::UpdateEdgeOnPeriodicalFace	(	const TopoDS_Edge &	aEdgeToUpdate,
		const TopoDS_Face &	OldFace,
		const TopoDS_Face &	NewFace
	)

static

recompute PCurves of the closing (SIM , with 2 PCurves) edge on the NewFace

◆ UpdatePCurves()

static void TopOpeBRepBuild_Tools::UpdatePCurves	(	const TopoDS_Wire &	aWire,
		const TopoDS_Face &	fromFace,
		const TopoDS_Face &	toFace
	)

static

Recompute PCurves of the all edges from the wire on the <toFace>

The documentation for this class was generated from the following file:

TopOpeBRepBuild_Tools.hxx

TopOpeBRepBuild_Tools Class Reference

Static Public Member Functions

Detailed Description

Member Function Documentation

◆ CheckFaceClosed2d()

◆ CorrectCurveOnSurface()

◆ CorrectFace2d()

◆ CorrectPointOnCurve()

◆ CorrectTolerances()

◆ FindState()

◆ FindState1()

◆ FindState2()

◆ FindStateThroughVertex()

◆ GetAdjacentFace()

◆ GetNormalInNearestPoint()

◆ GetNormalToFaceOnEdge()

◆ GetTangentToEdge()

◆ GetTangentToEdgeEdge()

◆ IsDegEdgesTheSame()

◆ NormalizeFace()

◆ PropagateState()

◆ PropagateStateForWires()

◆ SpreadStateToChild()

◆ UpdateEdgeOnFace()

◆ UpdateEdgeOnPeriodicalFace()

◆ UpdatePCurves()