Open CASCADE Technology
7.4.0
|
Describes a surface of linear extrusion ("extruded surface"), e.g. a generalized cylinder. Such a surface is obtained by sweeping a curve (called the "extruded curve" or "basis") in a given direction (referred to as the "direction of extrusion" and defined by a unit vector). The u parameter is along the extruded curve. The v parameter is along the direction of extrusion. The parameter range for the u parameter is defined by the reference curve. The parameter range for the v parameter is ] - infinity, + infinity [. The position of the curve gives the origin of the v parameter. The surface is "CN" in the v parametric direction. The form of a surface of linear extrusion is generally a ruled surface (GeomAbs_RuledForm). It can be: More...
#include <Geom_SurfaceOfLinearExtrusion.hxx>
Public Member Functions | |
Geom_SurfaceOfLinearExtrusion (const Handle< Geom_Curve > &C, const gp_Dir &V) | |
V is the direction of extrusion. C is the extruded curve. The form of a SurfaceOfLinearExtrusion can be : . ruled surface (RuledForm), . a cylindrical surface if the extruded curve is a circle or a trimmed circle (CylindricalForm), . a plane surface if the extruded curve is a Line (PlanarForm). Warnings : Degenerated surface cases are not detected. For example if the curve C is a line and V is parallel to the direction of this line. More... | |
void | SetDirection (const gp_Dir &V) |
Assigns V as the "direction of extrusion" for this surface of linear extrusion. More... | |
void | SetBasisCurve (const Handle< Geom_Curve > &C) |
Modifies this surface of linear extrusion by redefining its "basis curve" (the "extruded curve"). More... | |
void | UReverse () override |
Changes the orientation of this surface of linear extrusion in the u parametric direction. The bounds of the surface are not changed, but the given parametric direction is reversed. Hence the orientation of the surface is reversed. In the case of a surface of linear extrusion: More... | |
Standard_Real | UReversedParameter (const Standard_Real U) const override |
Computes the u parameter on the modified surface, produced by reversing its u parametric direction, for any point of u parameter U on this surface of linear extrusion. In the case of an extruded surface: More... | |
void | VReverse () override |
Changes the orientation of this surface of linear extrusion in the v parametric direction. The bounds of the surface are not changed, but the given parametric direction is reversed. Hence the orientation of the surface is reversed. In the case of a surface of linear extrusion: More... | |
Standard_Real | VReversedParameter (const Standard_Real V) const override |
Computes the v parameter on the modified surface, produced by reversing its u v parametric direction, for any point of v parameter V on this surface of linear extrusion. In the case of an extruded surface VReverse returns -V. More... | |
void | Bounds (Standard_Real &U1, Standard_Real &U2, Standard_Real &V1, Standard_Real &V2) const override |
Returns the parametric bounds U1, U2, V1 and V2 of this surface of linear extrusion. A surface of linear extrusion is infinite in the v parametric direction, so: More... | |
Standard_Boolean | IsUClosed () const override |
IsUClosed returns true if the "basis curve" of this surface of linear extrusion is closed. More... | |
Standard_Boolean | IsVClosed () const override |
IsVClosed always returns false. More... | |
Standard_Boolean | IsCNu (const Standard_Integer N) const override |
IsCNu returns true if the degree of continuity for the "basis curve" of this surface of linear extrusion is at least N. Raises RangeError if N < 0. More... | |
Standard_Boolean | IsCNv (const Standard_Integer N) const override |
IsCNv always returns true. More... | |
Standard_Boolean | IsUPeriodic () const override |
IsUPeriodic returns true if the "basis curve" of this surface of linear extrusion is periodic. More... | |
Standard_Boolean | IsVPeriodic () const override |
IsVPeriodic always returns false. More... | |
Handle< Geom_Curve > | UIso (const Standard_Real U) const override |
Computes the U isoparametric curve of this surface of linear extrusion. This is the line parallel to the direction of extrusion, passing through the point of parameter U of the basis curve. More... | |
Handle< Geom_Curve > | VIso (const Standard_Real V) const override |
Computes the V isoparametric curve of this surface of linear extrusion. This curve is obtained by translating the extruded curve in the direction of extrusion, with the magnitude V. More... | |
void | D0 (const Standard_Real U, const Standard_Real V, gp_Pnt &P) const override |
Computes the point P (U, V) on the surface. The parameter U is the parameter on the extruded curve. The parametrization V is a linear parametrization, and the direction of parametrization is the direction of extrusion. If the point is on the extruded curve, V = 0.0. More... | |
void | D1 (const Standard_Real U, const Standard_Real V, gp_Pnt &P, gp_Vec &D1U, gp_Vec &D1V) const override |
Computes the current point and the first derivatives in the directions U and V. Raises UndefinedDerivative if the continuity of the surface is not C1. More... | |
void | D2 (const Standard_Real U, const Standard_Real V, gp_Pnt &P, gp_Vec &D1U, gp_Vec &D1V, gp_Vec &D2U, gp_Vec &D2V, gp_Vec &D2UV) const override |
— Purpose ; Computes the current point, the first and the second derivatives in the directions U and V. Raises UndefinedDerivative if the continuity of the surface is not C2. More... | |
void | D3 (const Standard_Real U, const Standard_Real V, gp_Pnt &P, gp_Vec &D1U, gp_Vec &D1V, gp_Vec &D2U, gp_Vec &D2V, gp_Vec &D2UV, gp_Vec &D3U, gp_Vec &D3V, gp_Vec &D3UUV, gp_Vec &D3UVV) const override |
Computes the current point, the first,the second and the third derivatives in the directions U and V. Raises UndefinedDerivative if the continuity of the surface is not C3. More... | |
gp_Vec | DN (const Standard_Real U, const Standard_Real V, const Standard_Integer Nu, const Standard_Integer Nv) const override |
Computes the derivative of order Nu in the direction u and Nv in the direction v. Raises UndefinedDerivative if the continuity of the surface is not CNu in the u direction and CNv in the v direction. Raises RangeError if Nu + Nv < 1 or Nu < 0 or Nv < 0. More... | |
void | Transform (const gp_Trsf &T) override |
Applies the transformation T to this surface of linear extrusion. More... | |
virtual void | TransformParameters (Standard_Real &U, Standard_Real &V, const gp_Trsf &T) const override |
Computes the parameters on the transformed surface for the transform of the point of parameters U,V on <me>. More... | |
virtual gp_GTrsf2d | ParametricTransformation (const gp_Trsf &T) const override |
Returns a 2d transformation used to find the new parameters of a point on the transformed surface. More... | |
Handle< Geom_Geometry > | Copy () const override |
Creates a new object which is a copy of this surface of linear extrusion. More... | |
Public Member Functions inherited from Geom_SweptSurface | |
GeomAbs_Shape | Continuity () const override |
returns the continuity of the surface : C0 : only geometric continuity, C1 : continuity of the first derivative all along the surface, C2 : continuity of the second derivative all along the surface, C3 : continuity of the third derivative all along the surface, G1 : tangency continuity all along the surface, G2 : curvature continuity all along the surface, CN : the order of continuity is infinite. More... | |
const gp_Dir & | Direction () const |
Returns the reference direction of the swept surface. For a surface of revolution it is the direction of the revolution axis, for a surface of linear extrusion it is the direction of extrusion. More... | |
Handle< Geom_Curve > | BasisCurve () const |
Returns the referenced curve of the surface. For a surface of revolution it is the revolution curve, for a surface of linear extrusion it is the extruded curve. More... | |
Public Member Functions inherited from Geom_Surface | |
Handle< Geom_Surface > | UReversed () const |
Reverses the U direction of parametrization of <me>. The bounds of the surface are not modified. A copy of <me> is returned. More... | |
Handle< Geom_Surface > | VReversed () const |
Reverses the V direction of parametrization of <me>. The bounds of the surface are not modified. A copy of <me> is returned. More... | |
virtual Standard_Real | UPeriod () const |
Returns the period of this surface in the u parametric direction. raises if the surface is not uperiodic. More... | |
virtual Standard_Real | VPeriod () const |
Returns the period of this surface in the v parametric direction. raises if the surface is not vperiodic. More... | |
gp_Pnt | Value (const Standard_Real U, const Standard_Real V) const |
Computes the point of parameter U on the surface. More... | |
Public Member Functions inherited from Geom_Geometry | |
void | Mirror (const gp_Pnt &P) |
Performs the symmetrical transformation of a Geometry with respect to the point P which is the center of the symmetry. More... | |
void | Mirror (const gp_Ax1 &A1) |
Performs the symmetrical transformation of a Geometry with respect to an axis placement which is the axis of the symmetry. More... | |
void | Mirror (const gp_Ax2 &A2) |
Performs the symmetrical transformation of a Geometry with respect to a plane. The axis placement A2 locates the plane of the symmetry : (Location, XDirection, YDirection). More... | |
void | Rotate (const gp_Ax1 &A1, const Standard_Real Ang) |
Rotates a Geometry. A1 is the axis of the rotation. Ang is the angular value of the rotation in radians. More... | |
void | Scale (const gp_Pnt &P, const Standard_Real S) |
Scales a Geometry. S is the scaling value. More... | |
void | Translate (const gp_Vec &V) |
Translates a Geometry. V is the vector of the tanslation. More... | |
void | Translate (const gp_Pnt &P1, const gp_Pnt &P2) |
Translates a Geometry from the point P1 to the point P2. More... | |
Handle< Geom_Geometry > | Mirrored (const gp_Pnt &P) const |
Handle< Geom_Geometry > | Mirrored (const gp_Ax1 &A1) const |
Handle< Geom_Geometry > | Mirrored (const gp_Ax2 &A2) const |
Handle< Geom_Geometry > | Rotated (const gp_Ax1 &A1, const Standard_Real Ang) const |
Handle< Geom_Geometry > | Scaled (const gp_Pnt &P, const Standard_Real S) const |
Handle< Geom_Geometry > | Transformed (const gp_Trsf &T) const |
Handle< Geom_Geometry > | Translated (const gp_Vec &V) const |
Handle< Geom_Geometry > | Translated (const gp_Pnt &P1, const gp_Pnt &P2) const |
Public Member Functions inherited from Standard_Transient | |
Standard_Transient () | |
Empty constructor. More... | |
Standard_Transient (const Standard_Transient &) | |
Copy constructor – does nothing. More... | |
Standard_Transient & | operator= (const Standard_Transient &) |
Assignment operator, needed to avoid copying reference counter. More... | |
virtual | ~Standard_Transient () |
Destructor must be virtual. More... | |
virtual void | Delete () const |
Memory deallocator for transient classes. More... | |
virtual const opencascade::handle< Standard_Type > & | DynamicType () const |
Returns a type descriptor about this object. More... | |
Standard_Boolean | IsInstance (const opencascade::handle< Standard_Type > &theType) const |
Returns a true value if this is an instance of Type. More... | |
Standard_Boolean | IsInstance (const Standard_CString theTypeName) const |
Returns a true value if this is an instance of TypeName. More... | |
Standard_Boolean | IsKind (const opencascade::handle< Standard_Type > &theType) const |
Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More... | |
Standard_Boolean | IsKind (const Standard_CString theTypeName) const |
Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More... | |
Standard_Transient * | This () const |
Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero. More... | |
Standard_Integer | GetRefCount () const |
Get the reference counter of this object. More... | |
void | IncrementRefCounter () const |
Increments the reference counter of this object. More... | |
Standard_Integer | DecrementRefCounter () const |
Decrements the reference counter of this object; returns the decremented value. More... | |
Additional Inherited Members | |
Public Types inherited from Standard_Transient | |
typedef void | base_type |
Returns a type descriptor about this object. More... | |
Static Public Member Functions inherited from Standard_Transient | |
static const char * | get_type_name () |
Returns a type descriptor about this object. More... | |
static const opencascade::handle< Standard_Type > & | get_type_descriptor () |
Returns type descriptor of Standard_Transient class. More... | |
Protected Attributes inherited from Geom_SweptSurface | |
Handle< Geom_Curve > | basisCurve |
gp_Dir | direction |
GeomAbs_Shape | smooth |
Describes a surface of linear extrusion ("extruded surface"), e.g. a generalized cylinder. Such a surface is obtained by sweeping a curve (called the "extruded curve" or "basis") in a given direction (referred to as the "direction of extrusion" and defined by a unit vector). The u parameter is along the extruded curve. The v parameter is along the direction of extrusion. The parameter range for the u parameter is defined by the reference curve. The parameter range for the v parameter is ] - infinity, + infinity [. The position of the curve gives the origin of the v parameter. The surface is "CN" in the v parametric direction. The form of a surface of linear extrusion is generally a ruled surface (GeomAbs_RuledForm). It can be:
Geom_SurfaceOfLinearExtrusion::Geom_SurfaceOfLinearExtrusion | ( | const Handle< Geom_Curve > & | C, |
const gp_Dir & | V | ||
) |
V is the direction of extrusion. C is the extruded curve. The form of a SurfaceOfLinearExtrusion can be : . ruled surface (RuledForm), . a cylindrical surface if the extruded curve is a circle or a trimmed circle (CylindricalForm), . a plane surface if the extruded curve is a Line (PlanarForm). Warnings : Degenerated surface cases are not detected. For example if the curve C is a line and V is parallel to the direction of this line.
|
overridevirtual |
Returns the parametric bounds U1, U2, V1 and V2 of this surface of linear extrusion. A surface of linear extrusion is infinite in the v parametric direction, so:
Implements Geom_Surface.
|
overridevirtual |
Creates a new object which is a copy of this surface of linear extrusion.
Implements Geom_Geometry.
|
overridevirtual |
Computes the point P (U, V) on the surface. The parameter U is the parameter on the extruded curve. The parametrization V is a linear parametrization, and the direction of parametrization is the direction of extrusion. If the point is on the extruded curve, V = 0.0.
Implements Geom_Surface.
|
overridevirtual |
Computes the current point and the first derivatives in the directions U and V. Raises UndefinedDerivative if the continuity of the surface is not C1.
Implements Geom_Surface.
|
overridevirtual |
— Purpose ; Computes the current point, the first and the second derivatives in the directions U and V. Raises UndefinedDerivative if the continuity of the surface is not C2.
Implements Geom_Surface.
|
overridevirtual |
Computes the current point, the first,the second and the third derivatives in the directions U and V. Raises UndefinedDerivative if the continuity of the surface is not C3.
Implements Geom_Surface.
|
overridevirtual |
Computes the derivative of order Nu in the direction u and Nv in the direction v. Raises UndefinedDerivative if the continuity of the surface is not CNu in the u direction and CNv in the v direction. Raises RangeError if Nu + Nv < 1 or Nu < 0 or Nv < 0.
Implements Geom_Surface.
|
overridevirtual |
IsCNu returns true if the degree of continuity for the "basis curve" of this surface of linear extrusion is at least N. Raises RangeError if N < 0.
Implements Geom_Surface.
|
overridevirtual |
IsCNv always returns true.
Implements Geom_Surface.
|
overridevirtual |
IsUClosed returns true if the "basis curve" of this surface of linear extrusion is closed.
Implements Geom_Surface.
|
overridevirtual |
IsUPeriodic returns true if the "basis curve" of this surface of linear extrusion is periodic.
Implements Geom_Surface.
|
overridevirtual |
IsVClosed always returns false.
Implements Geom_Surface.
|
overridevirtual |
IsVPeriodic always returns false.
Implements Geom_Surface.
|
overridevirtual |
Returns a 2d transformation used to find the new parameters of a point on the transformed surface.
me->Transformed(T)->Value(U',V')
is the same point as
me->Value(U,V).Transformed(T)
Where U',V' are obtained by transforming U,V with th 2d transformation returned by
me->ParametricTransformation(T)
This methods returns a scale U by BasisCurve()->ParametricTransformation(T) V by T.ScaleFactor()
Reimplemented from Geom_Surface.
void Geom_SurfaceOfLinearExtrusion::SetBasisCurve | ( | const Handle< Geom_Curve > & | C | ) |
Modifies this surface of linear extrusion by redefining its "basis curve" (the "extruded curve").
void Geom_SurfaceOfLinearExtrusion::SetDirection | ( | const gp_Dir & | V | ) |
Assigns V as the "direction of extrusion" for this surface of linear extrusion.
|
overridevirtual |
Applies the transformation T to this surface of linear extrusion.
Implements Geom_Geometry.
|
overridevirtual |
Computes the parameters on the transformed surface for the transform of the point of parameters U,V on <me>.
me->Transformed(T)->Value(U',V')
is the same point as
me->Value(U,V).Transformed(T)
Where U',V' are the new values of U,V after calling
me->TranformParameters(U,V,T)
This methods multiplies : U by BasisCurve()->ParametricTransformation(T) V by T.ScaleFactor()
Reimplemented from Geom_Surface.
|
overridevirtual |
Computes the U isoparametric curve of this surface of linear extrusion. This is the line parallel to the direction of extrusion, passing through the point of parameter U of the basis curve.
Implements Geom_Surface.
|
overridevirtual |
Changes the orientation of this surface of linear extrusion in the u parametric direction. The bounds of the surface are not changed, but the given parametric direction is reversed. Hence the orientation of the surface is reversed. In the case of a surface of linear extrusion:
Implements Geom_Surface.
|
overridevirtual |
Computes the u parameter on the modified surface, produced by reversing its u parametric direction, for any point of u parameter U on this surface of linear extrusion. In the case of an extruded surface:
Implements Geom_Surface.
|
overridevirtual |
Computes the V isoparametric curve of this surface of linear extrusion. This curve is obtained by translating the extruded curve in the direction of extrusion, with the magnitude V.
Implements Geom_Surface.
|
overridevirtual |
Changes the orientation of this surface of linear extrusion in the v parametric direction. The bounds of the surface are not changed, but the given parametric direction is reversed. Hence the orientation of the surface is reversed. In the case of a surface of linear extrusion:
Implements Geom_Surface.
|
overridevirtual |
Computes the v parameter on the modified surface, produced by reversing its u v parametric direction, for any point of v parameter V on this surface of linear extrusion. In the case of an extruded surface VReverse returns -V.
Implements Geom_Surface.