Open CASCADE Technology  7.4.0
Static Public Member Functions | Static Protected Member Functions

IntPatch_SpecialPoints Class Reference

#include <IntPatch_SpecialPoints.hxx>

Static Public Member Functions

static Standard_Boolean AddCrossUVIsoPoint (const Handle< Adaptor3d_HSurface > &theQSurf, const Handle< Adaptor3d_HSurface > &thePSurf, const IntSurf_PntOn2S &theRefPt, const Standard_Real theTol3d, IntSurf_PntOn2S &theAddedPoint, const Standard_Boolean theIsReversed=Standard_False)
 Adds the point defined as intersection of two isolines (U = 0 and V = 0) on theQSurf in theLine. theRefPt is used to correct adjusting parameters. If theIsReversed is TRUE then theQSurf correspond to the second (otherwise, the first) surface while forming intersection point IntSurf_PntOn2S. More...
 
static Standard_Boolean AddPointOnUorVIso (const Handle< Adaptor3d_HSurface > &theQSurf, const Handle< Adaptor3d_HSurface > &thePSurf, const IntSurf_PntOn2S &theRefPt, const Standard_Boolean theIsU, const Standard_Real theIsoParameter, const math_Vector &theToler, const math_Vector &theInitPoint, const math_Vector &theInfBound, const math_Vector &theSupBound, IntSurf_PntOn2S &theAddedPoint, const Standard_Boolean theIsReversed=Standard_False)
 Adds the point lain strictly in the isoline U = 0 or V = 0 of theQSurf, in theLine. theRefPt is used to correct adjusting parameters. If theIsReversed is TRUE then theQSurf corresponds to the second (otherwise, the first) surface while forming intersection point IntSurf_PntOn2S. All math_Vector-objects must be filled as follows: [1] - U-parameter of thePSurf; [2] - V-parameter of thePSurf; [3] - U- (if V-isoline is considered) or V-parameter (if U-isoline is considered) of theQSurf. More...
 
static Standard_Boolean AddSingularPole (const Handle< Adaptor3d_HSurface > &theQSurf, const Handle< Adaptor3d_HSurface > &thePSurf, const IntSurf_PntOn2S &thePtIso, IntPatch_Point &theVertex, IntSurf_PntOn2S &theAddedPoint, const Standard_Boolean theIsReversed=Standard_False, const Standard_Boolean theIsReqRefCheck=Standard_False)
 Computes the pole of sphere to add it in the intersection line. Stores the result in theAddedPoint variable (does not add in the line). At that, cone and sphere (with singularity) must be set in theQSurf parameter. By default (if theIsReversed == FALSE), theQSurf is the first surface of the Walking line. If it is not, theIsReversed parameter must be set to TRUE. theIsReqRefCheck is TRUE if and only if 3D-point of theRefPt must be pole or apex for check (e.g. if it is vertex). thePtIso is the reference point for obtaining isoline where must be placed the Apex/Pole. More...
 
static Standard_Boolean ContinueAfterSpecialPoint (const Handle< Adaptor3d_HSurface > &theQSurf, const Handle< Adaptor3d_HSurface > &thePSurf, const IntSurf_PntOn2S &theRefPt, const IntPatch_SpecPntType theSPType, const Standard_Real theTol2D, IntSurf_PntOn2S &theNewPoint, const Standard_Boolean theIsReversed=Standard_False)
 Special point has already been added in the line. Now, we need in correct prolongation of the line or in start new line. This function returns new point. More...
 
static void AdjustPointAndVertex (const IntSurf_PntOn2S &theRefPoint, const Standard_Real theArrPeriods[4], IntSurf_PntOn2S &theNewPoint, IntPatch_Point *const theVertex=0)
 Sets theNewPoint parameters in 2D-space the closest to theRefPoint with help of adding/subtracting corresponding periods. theArrPeriods must be filled as follows: {<U-period of 1st surface>, <V-period of 1st surface>, <U-period of 2nd surface>, <V-period of 2nd surface>}. If theVertex != 0 then its parameters will be filled as corresponding parameters of theNewPoint. More...
 

Static Protected Member Functions

static Standard_Boolean ProcessSphere (const IntSurf_PntOn2S &thePtIso, const gp_Vec &theDUofPSurf, const gp_Vec &theDVofPSurf, const Standard_Boolean theIsReversed, const Standard_Real theVquad, Standard_Real &theUquad, Standard_Boolean &theIsIsoChoosen)
 Computes "special point" in the sphere The parameter will be found in the range [0, 2*PI]. Therefore it must be adjusted to valid range by the high-level algorithm. More...
 
static Standard_Boolean ProcessCone (const IntSurf_PntOn2S &thePtIso, const gp_Vec &theDUofPSurf, const gp_Vec &theDVofPSurf, const gp_Cone &theCone, const Standard_Boolean theIsReversed, Standard_Real &theUquad, Standard_Boolean &theIsIsoChoosen)
 Computes "special point" in the cone. The parameter will be found in the range [0, 2*PI]. Therefore it must be adjusted to valid range by the high-level algorithm. More...
 
static Standard_Integer GetTangentToIntLineForCone (const Standard_Real theConeSemiAngle, const gp_XYZ &thePlnNormal, gp_XYZ theResult[2])
 Computes vector tangent to the intersection line in cone apex. There exist not more than 2 tangent. They will be stores in theResult vector. Returns the number of found tangents. thePlnNormal is the normalized vector of the normal to the plane intersected the cone. More...
 

Member Function Documentation

◆ AddCrossUVIsoPoint()

static Standard_Boolean IntPatch_SpecialPoints::AddCrossUVIsoPoint ( const Handle< Adaptor3d_HSurface > &  theQSurf,
const Handle< Adaptor3d_HSurface > &  thePSurf,
const IntSurf_PntOn2S &  theRefPt,
const Standard_Real  theTol3d,
IntSurf_PntOn2S &  theAddedPoint,
const Standard_Boolean  theIsReversed = Standard_False 
)
static

Adds the point defined as intersection of two isolines (U = 0 and V = 0) on theQSurf in theLine. theRefPt is used to correct adjusting parameters. If theIsReversed is TRUE then theQSurf correspond to the second (otherwise, the first) surface while forming intersection point IntSurf_PntOn2S.

◆ AddPointOnUorVIso()

static Standard_Boolean IntPatch_SpecialPoints::AddPointOnUorVIso ( const Handle< Adaptor3d_HSurface > &  theQSurf,
const Handle< Adaptor3d_HSurface > &  thePSurf,
const IntSurf_PntOn2S &  theRefPt,
const Standard_Boolean  theIsU,
const Standard_Real  theIsoParameter,
const math_Vector &  theToler,
const math_Vector &  theInitPoint,
const math_Vector &  theInfBound,
const math_Vector &  theSupBound,
IntSurf_PntOn2S &  theAddedPoint,
const Standard_Boolean  theIsReversed = Standard_False 
)
static

Adds the point lain strictly in the isoline U = 0 or V = 0 of theQSurf, in theLine. theRefPt is used to correct adjusting parameters. If theIsReversed is TRUE then theQSurf corresponds to the second (otherwise, the first) surface while forming intersection point IntSurf_PntOn2S. All math_Vector-objects must be filled as follows: [1] - U-parameter of thePSurf; [2] - V-parameter of thePSurf; [3] - U- (if V-isoline is considered) or V-parameter (if U-isoline is considered) of theQSurf.

◆ AddSingularPole()

static Standard_Boolean IntPatch_SpecialPoints::AddSingularPole ( const Handle< Adaptor3d_HSurface > &  theQSurf,
const Handle< Adaptor3d_HSurface > &  thePSurf,
const IntSurf_PntOn2S &  thePtIso,
IntPatch_Point &  theVertex,
IntSurf_PntOn2S &  theAddedPoint,
const Standard_Boolean  theIsReversed = Standard_False,
const Standard_Boolean  theIsReqRefCheck = Standard_False 
)
static

Computes the pole of sphere to add it in the intersection line. Stores the result in theAddedPoint variable (does not add in the line). At that, cone and sphere (with singularity) must be set in theQSurf parameter. By default (if theIsReversed == FALSE), theQSurf is the first surface of the Walking line. If it is not, theIsReversed parameter must be set to TRUE. theIsReqRefCheck is TRUE if and only if 3D-point of theRefPt must be pole or apex for check (e.g. if it is vertex). thePtIso is the reference point for obtaining isoline where must be placed the Apex/Pole.

ATTENTION!!! theVertex must be initialized before calling the method .

◆ AdjustPointAndVertex()

static void IntPatch_SpecialPoints::AdjustPointAndVertex ( const IntSurf_PntOn2S &  theRefPoint,
const Standard_Real  theArrPeriods[4],
IntSurf_PntOn2S &  theNewPoint,
IntPatch_Point *const  theVertex = 0 
)
static

Sets theNewPoint parameters in 2D-space the closest to theRefPoint with help of adding/subtracting corresponding periods. theArrPeriods must be filled as follows: {<U-period of 1st surface>, <V-period of 1st surface>, <U-period of 2nd surface>, <V-period of 2nd surface>}. If theVertex != 0 then its parameters will be filled as corresponding parameters of theNewPoint.

ATTENTION!!! theNewPoint is not only Output parameter. It is Input/Output one. I.e. theNewPoint is reference point together with theRefPt.

◆ ContinueAfterSpecialPoint()

static Standard_Boolean IntPatch_SpecialPoints::ContinueAfterSpecialPoint ( const Handle< Adaptor3d_HSurface > &  theQSurf,
const Handle< Adaptor3d_HSurface > &  thePSurf,
const IntSurf_PntOn2S &  theRefPt,
const IntPatch_SpecPntType  theSPType,
const Standard_Real  theTol2D,
IntSurf_PntOn2S &  theNewPoint,
const Standard_Boolean  theIsReversed = Standard_False 
)
static

Special point has already been added in the line. Now, we need in correct prolongation of the line or in start new line. This function returns new point.

ATTENTION!!! theNewPoint is not only Output parameter. It is Input/Output one. I.e. theNewPoint is reference point together with theRefPt.

◆ GetTangentToIntLineForCone()

static Standard_Integer IntPatch_SpecialPoints::GetTangentToIntLineForCone ( const Standard_Real  theConeSemiAngle,
const gp_XYZ &  thePlnNormal,
gp_XYZ  theResult[2] 
)
staticprotected

Computes vector tangent to the intersection line in cone apex. There exist not more than 2 tangent. They will be stores in theResult vector. Returns the number of found tangents. thePlnNormal is the normalized vector of the normal to the plane intersected the cone.

◆ ProcessCone()

static Standard_Boolean IntPatch_SpecialPoints::ProcessCone ( const IntSurf_PntOn2S &  thePtIso,
const gp_Vec &  theDUofPSurf,
const gp_Vec &  theDVofPSurf,
const gp_Cone &  theCone,
const Standard_Boolean  theIsReversed,
Standard_Real &  theUquad,
Standard_Boolean &  theIsIsoChoosen 
)
staticprotected

Computes "special point" in the cone. The parameter will be found in the range [0, 2*PI]. Therefore it must be adjusted to valid range by the high-level algorithm.

◆ ProcessSphere()

static Standard_Boolean IntPatch_SpecialPoints::ProcessSphere ( const IntSurf_PntOn2S &  thePtIso,
const gp_Vec &  theDUofPSurf,
const gp_Vec &  theDVofPSurf,
const Standard_Boolean  theIsReversed,
const Standard_Real  theVquad,
Standard_Real &  theUquad,
Standard_Boolean &  theIsIsoChoosen 
)
staticprotected

Computes "special point" in the sphere The parameter will be found in the range [0, 2*PI]. Therefore it must be adjusted to valid range by the high-level algorithm.

The documentation for this class was generated from the following file:
Generated by   doxygen 1.8.13