The glTF (GL Transmission Format) mesh reader into XDE document. More...

#include <RWGltf_CafReader.hxx>

Inheritance diagram for RWGltf_CafReader:

Public Member Functions
	RWGltf_CafReader ()
	Empty constructor. More...

bool	ToParallel () const
	Return TRUE if multithreaded optimizations are allowed; FALSE by default. More...

void	SetParallel (bool theToParallel)
	Setup multithreaded execution. More...

bool	ToSkipEmptyNodes ()
	Return TRUE if Nodes without Geometry should be ignored, TRUE by default. More...

void	SetSkipEmptyNodes (bool theToSkip)
	Set flag to ignore nodes without Geometry. More...

bool	ToUseMeshNameAsFallback ()
	Set flag to use Mesh name in case if Node name is empty, TRUE by default. More...

void	SetMeshNameAsFallback (bool theToFallback)
	Set flag to use Mesh name in case if Node name is empty. More...

Public Member Functions inherited from RWMesh_CafReader
	RWMesh_CafReader ()
	Empty constructor. More...

virtual	~RWMesh_CafReader ()
	Destructor. More...

const Handle< TDocStd_Document > &	Document () const
	Return target document. More...

void	SetDocument (const Handle< TDocStd_Document > &theDoc)
	Set target document. More...

const TCollection_AsciiString &	RootPrefix () const
	Return prefix for generating root labels names. More...

void	SetRootPrefix (const TCollection_AsciiString &theRootPrefix)
	Set prefix for generating root labels names. More...

Standard_Boolean	ToFillIncompleteDocument () const
	Flag indicating if partially read file content should be put into the XDE document, TRUE by default. More...

void	SetFillIncompleteDocument (Standard_Boolean theToFillIncomplete)
	Set flag allowing partially read file content to be put into the XDE document. More...

Standard_Integer	MemoryLimitMiB () const
	Return memory usage limit in MiB, -1 by default which means no limit. More...

void	SetMemoryLimitMiB (Standard_Integer theLimitMiB)
	Set memory usage limit in MiB; can be ignored by reader implementation! More...

const RWMesh_CoordinateSystemConverter &	CoordinateSystemConverter () const
	Return coordinate system converter. More...

void	SetCoordinateSystemConverter (const RWMesh_CoordinateSystemConverter &theConverter)
	Set coordinate system converter. More...

Standard_Real	SystemLengthUnit () const
	Return the length unit to convert into while reading the file, defined as scale factor for m (meters); -1.0 by default, which means that NO conversion will be applied. More...

void	SetSystemLengthUnit (Standard_Real theUnits)
	Set system length units to convert into while reading the file, defined as scale factor for m (meters). More...

Standard_Boolean	HasSystemCoordinateSystem () const
	Return TRUE if system coordinate system has been defined; FALSE by default. More...

const gp_Ax3 &	SystemCoordinateSystem () const
	Return system coordinate system; UNDEFINED by default, which means that no conversion will be done. More...

void	SetSystemCoordinateSystem (const gp_Ax3 &theCS)
	Set system origin coordinate system to perform conversion into during read. More...

void	SetSystemCoordinateSystem (RWMesh_CoordinateSystem theCS)
	Set system origin coordinate system to perform conversion into during read. More...

Standard_Real	FileLengthUnit () const
	Return the length unit to convert from while reading the file, defined as scale factor for m (meters). Can be undefined (-1.0) if file format is unitless. More...

void	SetFileLengthUnit (Standard_Real theUnits)
	Set (override) file length units to convert from while reading the file, defined as scale factor for m (meters). More...

Standard_Boolean	HasFileCoordinateSystem () const
	Return TRUE if file origin coordinate system has been defined. More...

const gp_Ax3 &	FileCoordinateSystem () const
	Return file origin coordinate system; can be UNDEFINED, which means no conversion will be done. More...

void	SetFileCoordinateSystem (const gp_Ax3 &theCS)
	Set (override) file origin coordinate system to perform conversion during read. More...

void	SetFileCoordinateSystem (RWMesh_CoordinateSystem theCS)
	Set (override) file origin coordinate system to perform conversion during read. More...

bool	Perform (const TCollection_AsciiString &theFile, const Handle< Message_ProgressIndicator > &theProgress)
	Read the data from specified file. The Document instance should be set beforehand. More...

Standard_Integer	ExtraStatus () const
	Return extended status flags. More...

TopoDS_Shape	SingleShape () const
	Return result as a single shape. More...

const NCollection_IndexedMap< TCollection_AsciiString > &	ExternalFiles () const
	Return the list of complementary files - external references (textures, data, etc.). More...

const TColStd_IndexedDataMapOfStringString &	Metadata () const
	Return metadata map. More...

Standard_Boolean	ProbeHeader (const TCollection_AsciiString &theFile, const Handle< Message_ProgressIndicator > &theProgress=Handle< Message_ProgressIndicator >())
	Read the header data from specified file without reading entire model. The main purpose is collecting metadata and external references - for copying model into a new location, for example. Can be NOT implemented (unsupported by format / reader). More...

Public Member Functions inherited from Standard_Transient
	Standard_Transient ()
	Empty constructor. More...

	Standard_Transient (const Standard_Transient &)
	Copy constructor – does nothing. More...

Standard_Transient &	operator= (const Standard_Transient &)
	Assignment operator, needed to avoid copying reference counter. More...

virtual	~Standard_Transient ()
	Destructor must be virtual. More...

virtual void	Delete () const
	Memory deallocator for transient classes. More...

virtual const opencascade::handle< Standard_Type > &	DynamicType () const
	Returns a type descriptor about this object. More...

Standard_Boolean	IsInstance (const opencascade::handle< Standard_Type > &theType) const
	Returns a true value if this is an instance of Type. More...

Standard_Boolean	IsInstance (const Standard_CString theTypeName) const
	Returns a true value if this is an instance of TypeName. More...

Standard_Boolean	IsKind (const opencascade::handle< Standard_Type > &theType) const
	Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...

Standard_Boolean	IsKind (const Standard_CString theTypeName) const
	Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...

Standard_Transient *	This () const
	Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero. More...

Standard_Integer	GetRefCount () const
	Get the reference counter of this object. More...

void	IncrementRefCounter () const
	Increments the reference counter of this object. More...

Standard_Integer	DecrementRefCounter () const
	Decrements the reference counter of this object; returns the decremented value. More...

Protected Member Functions
virtual Standard_Boolean	performMesh (const TCollection_AsciiString &theFile, const Handle< Message_ProgressIndicator > &theProgress, const Standard_Boolean theToProbe) override
	Read the mesh from specified file. More...

virtual Handle< RWGltf_PrimitiveArrayReader >	createMeshReaderContext ()
	Create primitive array reader context. Can be overridden by sub-class to read triangulation into application-specific data structures instead of Poly_Triangulation. Default implementation creates RWGltf_TriangulationReader. More...

virtual Standard_Boolean	readLateData (NCollection_Vector< TopoDS_Face > &theFaces, const TCollection_AsciiString &theFile, const Handle< Message_ProgressIndicator > &theProgress)
	Read late data from RWGltf_GltfLatePrimitiveArray stored as Poly_Triangulation within faces. More...

Protected Member Functions inherited from RWMesh_CafReader
virtual Standard_Boolean	perform (const TCollection_AsciiString &theFile, const Handle< Message_ProgressIndicator > &theProgress, const Standard_Boolean theToProbe)
	Read the data from specified file. Default implementation calls performMesh() and fills XDE document from collected shapes. More...

void	fillDocument ()
	Fill document with new root shapes. More...

Standard_Boolean	addShapeIntoDoc (const TopoDS_Shape &theShape, const TDF_Label &theLabel, const TCollection_AsciiString &theParentName)
	Append new shape into the document (recursively). More...

void	generateNames (const TCollection_AsciiString &theFile, const Standard_Integer theRootLower, const Standard_Boolean theWithSubLabels)
	Generate names for root labels starting from specified index. More...

Protected Attributes
Standard_Boolean	myToParallel
	flag to use multithreading; FALSE by default More...

Standard_Boolean	myToSkipEmptyNodes
	ignore nodes without Geometry; TRUE by default More...

Standard_Boolean	myUseMeshNameAsFallback
	flag to use Mesh name in case if Node name is empty, TRUE by default More...

Protected Attributes inherited from RWMesh_CafReader
Handle< TDocStd_Document >	myXdeDoc
	target document More...

TColStd_IndexedDataMapOfStringString	myMetadata
	metadata map More...

NCollection_IndexedMap< TCollection_AsciiString >	myExternalFiles
	the list of complementary files - external references (textures, data, etc.) More...

TCollection_AsciiString	myRootPrefix
	root folder for generating root labels names More...

TopTools_SequenceOfShape	myRootShapes
	sequence of result root shapes More...

RWMesh_NodeAttributeMap	myAttribMap
	map of per-shape attributes More...

RWMesh_CoordinateSystemConverter	myCoordSysConverter
	coordinate system converter More...

Standard_Boolean	myToFillDoc
	fill document from shape sequence More...

Standard_Boolean	myToFillIncomplete
	fill the document with partially retrieved data even if reader has failed with error More...

Standard_Integer	myMemoryLimitMiB
	memory usage limit More...

Standard_Integer	myExtraStatus
	extra status bitmask More...

Additional Inherited Members
Public Types inherited from Standard_Transient
typedef void	base_type
	Returns a type descriptor about this object. More...

Static Public Member Functions inherited from Standard_Transient
static const char *	get_type_name ()
	Returns a type descriptor about this object. More...

static const opencascade::handle< Standard_Type > &	get_type_descriptor ()
	Returns type descriptor of Standard_Transient class. More...

Static Protected Member Functions inherited from RWMesh_CafReader
static TCollection_AsciiString	shapeTypeToString (TopAbs_ShapeEnum theType)
	Return shape type as string. More...

Detailed Description

The glTF (GL Transmission Format) mesh reader into XDE document.

Constructor & Destructor Documentation

◆ RWGltf_CafReader()

RWGltf_CafReader::RWGltf_CafReader ( )

Empty constructor.

Member Function Documentation

◆ createMeshReaderContext()

virtual Handle< RWGltf_PrimitiveArrayReader > RWGltf_CafReader::createMeshReaderContext ( )

protectedvirtual

Create primitive array reader context. Can be overridden by sub-class to read triangulation into application-specific data structures instead of Poly_Triangulation. Default implementation creates RWGltf_TriangulationReader.

◆ performMesh()

virtual Standard_Boolean RWGltf_CafReader::performMesh	(	const TCollection_AsciiString &	theFile,
		const Handle< Message_ProgressIndicator > &	theProgress,
		const Standard_Boolean	theToProbe
	)

overrideprotectedvirtual

Read the mesh from specified file.

Implements RWMesh_CafReader.

◆ readLateData()

virtual Standard_Boolean RWGltf_CafReader::readLateData	(	NCollection_Vector< TopoDS_Face > &	theFaces,
		const TCollection_AsciiString &	theFile,
		const Handle< Message_ProgressIndicator > &	theProgress
	)

protectedvirtual

Read late data from RWGltf_GltfLatePrimitiveArray stored as Poly_Triangulation within faces.

◆ SetMeshNameAsFallback()

void RWGltf_CafReader::SetMeshNameAsFallback ( bool theToFallback )

inline

Set flag to use Mesh name in case if Node name is empty.

◆ SetParallel()

void RWGltf_CafReader::SetParallel ( bool theToParallel )

inline

Setup multithreaded execution.

◆ SetSkipEmptyNodes()

void RWGltf_CafReader::SetSkipEmptyNodes ( bool theToSkip )

inline

Set flag to ignore nodes without Geometry.

◆ ToParallel()

bool RWGltf_CafReader::ToParallel ( ) const

inline

Return TRUE if multithreaded optimizations are allowed; FALSE by default.

◆ ToSkipEmptyNodes()

bool RWGltf_CafReader::ToSkipEmptyNodes ( )

inline

Return TRUE if Nodes without Geometry should be ignored, TRUE by default.

◆ ToUseMeshNameAsFallback()

bool RWGltf_CafReader::ToUseMeshNameAsFallback ( )

inline

Set flag to use Mesh name in case if Node name is empty, TRUE by default.

Field Documentation

◆ myToParallel

Standard_Boolean RWGltf_CafReader::myToParallel

protected

flag to use multithreading; FALSE by default

◆ myToSkipEmptyNodes

Standard_Boolean RWGltf_CafReader::myToSkipEmptyNodes

protected

ignore nodes without Geometry; TRUE by default

◆ myUseMeshNameAsFallback

Standard_Boolean RWGltf_CafReader::myUseMeshNameAsFallback

protected

flag to use Mesh name in case if Node name is empty, TRUE by default

The documentation for this class was generated from the following file:

RWGltf_CafReader.hxx

RWGltf_CafReader Class Reference

Public Member Functions

Protected Member Functions

Protected Attributes

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ RWGltf_CafReader()

Member Function Documentation

◆ createMeshReaderContext()

◆ performMesh()

◆ readLateData()

◆ SetMeshNameAsFallback()

◆ SetParallel()

◆ SetSkipEmptyNodes()

◆ ToParallel()

◆ ToSkipEmptyNodes()

◆ ToUseMeshNameAsFallback()

Field Documentation

◆ myToParallel

◆ myToSkipEmptyNodes

◆ myUseMeshNameAsFallback