Attribute containing GD&T section of XCAF document. Provide tools for GD&T section management. More...
#include <XCAFDoc_DimTolTool.hxx>
Inheritance diagram for XCAFDoc_DimTolTool:
Public Member Functions | |
| XCAFDoc_DimTolTool () | |
| TDF_Label | BaseLabel () const |
| Returns the label under which GD&T table is stored. More... | |
| const Handle< XCAFDoc_ShapeTool > & | ShapeTool () |
| Returns internal XCAFDoc_ShapeTool tool. More... | |
| Standard_Boolean | IsDimension (const TDF_Label &theLab) const |
| Returns True if the label belongs to a GD&T table and is a Dimension definition. More... | |
| void | GetDimensionLabels (TDF_LabelSequence &theLabels) const |
| Returns a sequence of Dimension labels currently stored in the GD&T table. More... | |
| void | SetDimension (const TDF_LabelSequence &theFirstLS, const TDF_LabelSequence &theSecondLS, const TDF_Label &theDimL) const |
| Sets a dimension to sequences target labels. More... | |
| void | SetDimension (const TDF_Label &theFirstL, const TDF_Label &theSecondL, const TDF_Label &theDimL) const |
| Sets a dimension to target labels. More... | |
| void | SetDimension (const TDF_Label &theL, const TDF_Label &theDimL) const |
| Sets a dimension to the target label. More... | |
| Standard_Boolean | GetRefDimensionLabels (const TDF_Label &theShapeL, TDF_LabelSequence &theDimensions) const |
| Returns all Dimension labels defined for theShapeL. More... | |
| TDF_Label | AddDimension () |
| Adds a dimension definition to the GD&T table and returns its label. More... | |
| Standard_Boolean | IsGeomTolerance (const TDF_Label &theLab) const |
| Returns True if the label belongs to the GD&T table and is a dimension tolerance. More... | |
| void | GetGeomToleranceLabels (TDF_LabelSequence &theLabels) const |
| Returns a sequence of Tolerance labels currently stored in the GD&T table. More... | |
| void | SetGeomTolerance (const TDF_Label &theL, const TDF_Label &theGeomTolL) const |
| Sets a geometry tolerance from theGeomTolL to theL label. Checks if theGeomTolL is a geometry tolerance definition first. More... | |
| void | SetGeomTolerance (const TDF_LabelSequence &theL, const TDF_Label &theGeomTolL) const |
| Sets a geometry tolerance from theGeomTolL to sequence of labels theL. Checks if theGeomTolL is a geometry tolerance definition first. More... | |
| Standard_Boolean | GetRefGeomToleranceLabels (const TDF_Label &theShapeL, TDF_LabelSequence &theDimTols) const |
| Returns all GeomTolerance labels defined for theShapeL. More... | |
| TDF_Label | AddGeomTolerance () |
| Adds a GeomTolerance definition to the GD&T table and returns its label. More... | |
| Standard_Boolean | IsDimTol (const TDF_Label &theLab) const |
| Returns True if theLab belongs to the GD&T table and is a dmension tolerance. More... | |
| void | GetDimTolLabels (TDF_LabelSequence &Labels) const |
| Returns a sequence of D>s currently stored in the GD&T table. More... | |
| Standard_Boolean | FindDimTol (const Standard_Integer theKind, const Handle< TColStd_HArray1OfReal > &theVal, const Handle< TCollection_HAsciiString > &theName, const Handle< TCollection_HAsciiString > &theDescription, TDF_Label &lab) const |
| Finds a dimension tolerance definition in the GD&T table sutisfying the specified kind, values, name and description and returns its label if found. Returns False if dimension tolerance is not found in DGTtable. More... | |
| TDF_Label | FindDimTol (const Standard_Integer theKind, const Handle< TColStd_HArray1OfReal > &theVal, const Handle< TCollection_HAsciiString > &theName, const Handle< TCollection_HAsciiString > &theDescription) const |
| Finds a dimension tolerance in the GD&T table sutisfying the specified kind, values, name and description and returns its label if found (or Null label else). More... | |
| TDF_Label | AddDimTol (const Standard_Integer theKind, const Handle< TColStd_HArray1OfReal > &theVal, const Handle< TCollection_HAsciiString > &theName, const Handle< TCollection_HAsciiString > &theDescription) const |
| Adds a a dimension tolerance definition with the specified kind, value, name and description to the GD&T table and returns its label. More... | |
| void | SetDimTol (const TDF_Label &theL, const TDF_Label &theDimTolL) const |
| Sets existing dimension tolerance to theL label. More... | |
| TDF_Label | SetDimTol (const TDF_Label &theL, const Standard_Integer theKind, const Handle< TColStd_HArray1OfReal > &theVal, const Handle< TCollection_HAsciiString > &theName, const Handle< TCollection_HAsciiString > &theDescription) const |
| Creates a dimension tolerance and sets it to theL label. More... | |
| Standard_Boolean | GetRefShapeLabel (const TDF_Label &theL, TDF_LabelSequence &theShapeLFirst, TDF_LabelSequence &theShapeLSecond) const |
| Gets all shape labels reffered by theL label of the GD&T table. Returns False if there are no shape labels added to the sequences. More... | |
| Standard_Boolean | GetDimTol (const TDF_Label &theDimTolL, Standard_Integer &theKind, Handle< TColStd_HArray1OfReal > &theVal, Handle< TCollection_HAsciiString > &theName, Handle< TCollection_HAsciiString > &theDescription) const |
| Returns dimension tolerance assigned to theDimTolL label. Returns False if no such dimension tolerance is assigned. More... | |
| Standard_Boolean | IsDatum (const TDF_Label &lab) const |
| Returns True if label belongs to the GD&T table and is a Datum definition. More... | |
| void | GetDatumLabels (TDF_LabelSequence &Labels) const |
| Returns a sequence of Datums currently stored in the GD&T table. More... | |
| Standard_Boolean | FindDatum (const Handle< TCollection_HAsciiString > &theName, const Handle< TCollection_HAsciiString > &theDescription, const Handle< TCollection_HAsciiString > &theIdentification, TDF_Label &lab) const |
| Finds a datum sutisfying the specified name, description and identification and returns its label if found. More... | |
| TDF_Label | AddDatum (const Handle< TCollection_HAsciiString > &theName, const Handle< TCollection_HAsciiString > &theDescription, const Handle< TCollection_HAsciiString > &theIdentification) const |
| Adds a datum definition to the GD&T table and returns its label. More... | |
| TDF_Label | AddDatum () |
| Adds a datum definition to the GD&T table and returns its label. More... | |
| void | SetDatum (const TDF_LabelSequence &theShapeLabels, const TDF_Label &theDatumL) const |
| Sets a datum to the sequence of shape labels. More... | |
| void | SetDatum (const TDF_Label &theL, const TDF_Label &theTolerL, const Handle< TCollection_HAsciiString > &theName, const Handle< TCollection_HAsciiString > &theDescription, const Handle< TCollection_HAsciiString > &theIdentification) const |
| Sets a datum to theL label and binds it with theTolerL label. A datum with the specified name, description and identification is created if it isn't found in the GD&T table. More... | |
| void | SetDatumToGeomTol (const TDF_Label &theDatumL, const TDF_Label &theTolerL) const |
| Sets a datum from theDatumL label to theToletL label. More... | |
| Standard_Boolean | GetDatum (const TDF_Label &theDatumL, Handle< TCollection_HAsciiString > &theName, Handle< TCollection_HAsciiString > &theDescription, Handle< TCollection_HAsciiString > &theIdentification) const |
| Returns datum assigned to theDatumL label. Returns False if no such datum is assigned. More... | |
| Standard_Boolean | GetDatumOfTolerLabels (const TDF_Label &theDimTolL, TDF_LabelSequence &theDatums) const |
| Returns all Datum labels defined for theDimTolL label. More... | |
| Standard_Boolean | GetDatumWithObjectOfTolerLabels (const TDF_Label &theDimTolL, TDF_LabelSequence &theDatums) const |
| Returns all Datum labels with XCAFDimTolObjects_DatumObject defined for label theDimTolL. More... | |
| Standard_Boolean | GetTolerOfDatumLabels (const TDF_Label &theDatumL, TDF_LabelSequence &theTols) const |
| Returns all GeomToleranses labels defined for theDatumL label. More... | |
| Standard_Boolean | GetRefDatumLabel (const TDF_Label &theShapeL, TDF_LabelSequence &theDatum) const |
| Returns Datum label defined for theShapeL label. More... | |
| Standard_Boolean | IsLocked (const TDF_Label &theViewL) const |
| Returns true if the given GDT is marked as locked. More... | |
| void | Lock (const TDF_Label &theViewL) const |
| Mark the given GDT as locked. More... | |
| void | GetGDTPresentations (NCollection_IndexedDataMap< TDF_Label, TopoDS_Shape, TDF_LabelMapHasher > &theGDTLabelToShape) const |
| fill the map GDT label -> shape presentation More... | |
| void | SetGDTPresentations (NCollection_IndexedDataMap< TDF_Label, TopoDS_Shape, TDF_LabelMapHasher > &theGDTLabelToPrs) |
| Set shape presentation for GDT labels according to given map (theGDTLabelToPrs) theGDTLabelToPrsName map is an additional argument, can be used to set presentation names. If label is not in the theGDTLabelToPrsName map, the presentation name will be empty. More... | |
| void | Unlock (const TDF_Label &theViewL) const |
| Unlock the given GDT. More... | |
| const Standard_GUID & | ID () const override |
| Returns the ID of the attribute. More... | |
| void | Restore (const Handle< TDF_Attribute > &with) override |
| Restores the backuped contents from <anAttribute> into this one. It is used when aborting a transaction. More... | |
| Handle< TDF_Attribute > | NewEmpty () const override |
| Returns an new empty attribute from the good end type. It is used by the copy algorithm. More... | |
| void | Paste (const Handle< TDF_Attribute > &into, const Handle< TDF_RelocationTable > &RT) const override |
| This method is different from the "Copy" one, because it is used when copying an attribute from a source structure into a target structure. This method may paste the contents of <me> into <intoAttribute>. More... | |
 Public Member Functions inherited from TDF_Attribute | |
| virtual void | SetID (const Standard_GUID &) |
| Sets specific ID of the attribute (supports several attributes of one type at the same label feature). More... | |
| virtual void | SetID () |
| Sets default ID defined in nested class (to be used for attributes having User ID feature). More... | |
| const TDF_Label | Label () const |
| Returns the label to which the attribute is attached. If the label is not included in a DF, the label is null. See Label. Warning If the label is not included in a data framework, it is null. This function should not be redefined inline. More... | |
| Standard_Integer | Transaction () const |
| Returns the transaction index in which the attribute has been created or modified. More... | |
| Standard_Integer | UntilTransaction () const |
| Returns the upper transaction index until which the attribute is/was valid. This number may vary. A removed attribute validity range is reduced to its transaction index. More... | |
| Standard_Boolean | IsValid () const |
| Returns true if the attribute is valid; i.e. not a backuped or removed one. More... | |
| Standard_Boolean | IsNew () const |
| Returns true if the attribute has no backup. More... | |
| Standard_Boolean | IsForgotten () const |
| Returns true if the attribute forgotten status is set. More... | |
| Standard_Boolean | IsAttribute (const Standard_GUID &anID) const |
| Returns true if it exists an associated attribute of <me> with <anID> as ID. More... | |
| Standard_Boolean | FindAttribute (const Standard_GUID &anID, Handle< TDF_Attribute > &anAttribute) const |
| Finds an associated attribute of <me>, according to <anID>. the returned <anAttribute> is a valid one. The method returns True if found, False otherwise. A removed attribute cannot be found using this method. More... | |
| template<class T > | |
| Standard_Boolean | FindAttribute (const Standard_GUID &theID, Handle< T > &theAttr) const |
| Safe variant for arbitrary type of argument. More... | |
| void | AddAttribute (const Handle< TDF_Attribute > &other) const |
| Adds an Attribute <other> to the label of <me>.Raises if there is already one of the same GUID fhan <other>. More... | |
| Standard_Boolean | ForgetAttribute (const Standard_GUID &aguid) const |
| Forgets the Attribute of GUID <aguid> associated to the label of <me>. Be carefull that if <me> is the attribute of <guid>, <me> will have a null label after this call. If the attribute doesn't exist returns False. Otherwise returns True. More... | |
| void | ForgetAllAttributes (const Standard_Boolean clearChildren=Standard_True) const |
| Forgets all the attributes attached to the label of <me>. Does it on the sub-labels if <clearChildren> is set to true. Of course, this method is compatible with Transaction & Delta mecanisms. Be carefull that if <me> will have a null label after this call. More... | |
| virtual void | AfterAddition () |
| Something to do after adding an Attribute to a label. More... | |
| virtual void | BeforeRemoval () |
| Something to do before removing an Attribute from a label. More... | |
| virtual void | BeforeForget () |
| Something to do before forgetting an Attribute to a label. More... | |
| virtual void | AfterResume () |
| Something to do after resuming an Attribute from a label. More... | |
| virtual Standard_Boolean | AfterRetrieval (const Standard_Boolean forceIt=Standard_False) |
| Something to do AFTER creation of an attribute by persistent-transient translation. The returned status says if AfterUndo has been performed (true) or if this callback must be called once again further (false). If <forceIt> is set to true, the method MUST perform and return true. Does nothing by default and returns true. More... | |
| virtual Standard_Boolean | BeforeUndo (const Handle< TDF_AttributeDelta > &anAttDelta, const Standard_Boolean forceIt=Standard_False) |
| Something to do before applying <anAttDelta>. The returned status says if AfterUndo has been performed (true) or if this callback must be called once again further (false). If <forceIt> is set to true, the method MUST perform and return true. Does nothing by default and returns true. More... | |
| virtual Standard_Boolean | AfterUndo (const Handle< TDF_AttributeDelta > &anAttDelta, const Standard_Boolean forceIt=Standard_False) |
| Something to do after applying <anAttDelta>. The returned status says if AfterUndo has been performed (true) or if this callback must be called once again further (false). If <forceIt> is set to true, the method MUST perform and return true. Does nothing by default and returns true. More... | |
| virtual void | BeforeCommitTransaction () |
| A callback. By default does nothing. It is called by TDF_Data::CommitTransaction() method. More... | |
| void | Backup () |
| Backups the attribute. The backuped attribute is flagged "Backuped" and not "Valid". More... | |
| Standard_Boolean | IsBackuped () const |
| Returns true if the attribute backup status is set. This status is set/unset by the Backup() method. More... | |
| virtual Handle< TDF_Attribute > | BackupCopy () const |
| Copies the attribute contents into a new other attribute. It is used by Backup(). More... | |
| virtual Handle< TDF_DeltaOnAddition > | DeltaOnAddition () const |
| Makes an AttributeDelta because <me> appeared. The only known use of a redefinition of this method is to return a null handle (no delta). More... | |
| virtual Handle< TDF_DeltaOnForget > | DeltaOnForget () const |
| Makes an AttributeDelta because <me> has been forgotten. More... | |
| virtual Handle< TDF_DeltaOnResume > | DeltaOnResume () const |
| Makes an AttributeDelta because <me> has been resumed. More... | |
| virtual Handle< TDF_DeltaOnModification > | DeltaOnModification (const Handle< TDF_Attribute > &anOldAttribute) const |
| Makes a DeltaOnModification between <me> and <anOldAttribute. More... | |
| virtual void | DeltaOnModification (const Handle< TDF_DeltaOnModification > &aDelta) |
| Applies a DeltaOnModification to <me>. More... | |
| virtual Handle< TDF_DeltaOnRemoval > | DeltaOnRemoval () const |
| Makes a DeltaOnRemoval on <me> because <me> has disappeared from the DS. More... | |
| virtual void | References (const Handle< TDF_DataSet > &aDataSet) const |
| Adds the first level referenced attributes and labels to <aDataSet>. More... | |
| virtual Standard_OStream & | Dump (Standard_OStream &anOS) const |
| Dumps the minimum information about <me> on <aStream>. More... | |
| Standard_OStream & | operator<< (Standard_OStream &anOS) const |
| virtual void | ExtendedDump (Standard_OStream &anOS, const TDF_IDFilter &aFilter, TDF_AttributeIndexedMap &aMap) const |
| Dumps the attribute content on <aStream>, using <aMap> like this: if an attribute is not in the map, first put add it to the map and then dump it. Use the map rank instead of dumping each attribute field. More... | |
| void | Forget (const Standard_Integer aTransaction) |
| Forgets the attribute. <aTransaction> is the current transaction in which the forget is done. A forgotten attribute is also flagged not "Valid". More... | |
| Public Member Functions inherited from Standard_Transient | |
| Standard_Transient () | |
| Empty constructor. More... | |
| Standard_Transient (const Standard_Transient &) | |
| Copy constructor – does nothing. More... | |
| Standard_Transient & | operator= (const Standard_Transient &) |
| Assignment operator, needed to avoid copying reference counter. More... | |
| virtual | ~Standard_Transient () |
| Destructor must be virtual. More... | |
| virtual void | Delete () const |
| Memory deallocator for transient classes. More... | |
| virtual const opencascade::handle< Standard_Type > & | DynamicType () const |
| Returns a type descriptor about this object. More... | |
| Standard_Boolean | IsInstance (const opencascade::handle< Standard_Type > &theType) const |
| Returns a true value if this is an instance of Type. More... | |
| Standard_Boolean | IsInstance (const Standard_CString theTypeName) const |
| Returns a true value if this is an instance of TypeName. More... | |
| Standard_Boolean | IsKind (const opencascade::handle< Standard_Type > &theType) const |
| Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More... | |
| Standard_Boolean | IsKind (const Standard_CString theTypeName) const |
| Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More... | |
| Standard_Transient * | This () const |
| Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero. More... | |
| Standard_Integer | GetRefCount () const |
| Get the reference counter of this object. More... | |
| void | IncrementRefCounter () const |
| Increments the reference counter of this object. More... | |
| Standard_Integer | DecrementRefCounter () const |
| Decrements the reference counter of this object; returns the decremented value. More... | |
Static Public Member Functions | |
| static Handle< XCAFDoc_DimTolTool > | Set (const TDF_Label &L) |
| Creates (if not exist) DimTolTool attribute. More... | |
| static const Standard_GUID & | GetID () |
| Returns the standard GD&T tool GUID. More... | |
| Static Public Member Functions inherited from Standard_Transient | |
| static const char * | get_type_name () |
| Returns a type descriptor about this object. More... | |
| static const opencascade::handle< Standard_Type > & | get_type_descriptor () |
| Returns type descriptor of Standard_Transient class. More... | |
Additional Inherited Members | |
| Public Types inherited from Standard_Transient | |
| typedef void | base_type |
| Returns a type descriptor about this object. More... | |
| Protected Member Functions inherited from TDF_Attribute | |
| TDF_Attribute () | |
| Initializes fields. More... | |
Detailed Description
Attribute containing GD&T section of XCAF document. Provide tools for GD&T section management.
Constructor & Destructor Documentation
◆ XCAFDoc_DimTolTool()
| XCAFDoc_DimTolTool::XCAFDoc_DimTolTool | ( | ) |
Member Function Documentation
◆ AddDatum() [1/2]
| TDF_Label XCAFDoc_DimTolTool::AddDatum | ( | const Handle< TCollection_HAsciiString > & | theName, |
| const Handle< TCollection_HAsciiString > & | theDescription, | ||
| const Handle< TCollection_HAsciiString > & | theIdentification | ||
| ) | const |
Adds a datum definition to the GD&T table and returns its label.
◆ AddDatum() [2/2]
| TDF_Label XCAFDoc_DimTolTool::AddDatum | ( | ) |
Adds a datum definition to the GD&T table and returns its label.
◆ AddDimension()
| TDF_Label XCAFDoc_DimTolTool::AddDimension | ( | ) |
Adds a dimension definition to the GD&T table and returns its label.
◆ AddDimTol()
| TDF_Label XCAFDoc_DimTolTool::AddDimTol | ( | const Standard_Integer | theKind, |
| const Handle< TColStd_HArray1OfReal > & | theVal, | ||
| const Handle< TCollection_HAsciiString > & | theName, | ||
| const Handle< TCollection_HAsciiString > & | theDescription | ||
| ) | const |
Adds a a dimension tolerance definition with the specified kind, value, name and description to the GD&T table and returns its label.
◆ AddGeomTolerance()
| TDF_Label XCAFDoc_DimTolTool::AddGeomTolerance | ( | ) |
Adds a GeomTolerance definition to the GD&T table and returns its label.
◆ BaseLabel()
| TDF_Label XCAFDoc_DimTolTool::BaseLabel | ( | ) | const |
Returns the label under which GD&T table is stored.
◆ FindDatum()
| Standard_Boolean XCAFDoc_DimTolTool::FindDatum | ( | const Handle< TCollection_HAsciiString > & | theName, |
| const Handle< TCollection_HAsciiString > & | theDescription, | ||
| const Handle< TCollection_HAsciiString > & | theIdentification, | ||
| TDF_Label & | lab | ||
| ) | const |
Finds a datum sutisfying the specified name, description and identification and returns its label if found.
◆ FindDimTol() [1/2]
| Standard_Boolean XCAFDoc_DimTolTool::FindDimTol | ( | const Standard_Integer | theKind, |
| const Handle< TColStd_HArray1OfReal > & | theVal, | ||
| const Handle< TCollection_HAsciiString > & | theName, | ||
| const Handle< TCollection_HAsciiString > & | theDescription, | ||
| TDF_Label & | lab | ||
| ) | const |
Finds a dimension tolerance definition in the GD&T table sutisfying the specified kind, values, name and description and returns its label if found. Returns False if dimension tolerance is not found in DGTtable.
◆ FindDimTol() [2/2]
| TDF_Label XCAFDoc_DimTolTool::FindDimTol | ( | const Standard_Integer | theKind, |
| const Handle< TColStd_HArray1OfReal > & | theVal, | ||
| const Handle< TCollection_HAsciiString > & | theName, | ||
| const Handle< TCollection_HAsciiString > & | theDescription | ||
| ) | const |
Finds a dimension tolerance in the GD&T table sutisfying the specified kind, values, name and description and returns its label if found (or Null label else).
◆ GetDatum()
| Standard_Boolean XCAFDoc_DimTolTool::GetDatum | ( | const TDF_Label & | theDatumL, |
| Handle< TCollection_HAsciiString > & | theName, | ||
| Handle< TCollection_HAsciiString > & | theDescription, | ||
| Handle< TCollection_HAsciiString > & | theIdentification | ||
| ) | const |
Returns datum assigned to theDatumL label. Returns False if no such datum is assigned.
◆ GetDatumLabels()
| void XCAFDoc_DimTolTool::GetDatumLabels | ( | TDF_LabelSequence & | Labels | ) | const |
Returns a sequence of Datums currently stored in the GD&T table.
◆ GetDatumOfTolerLabels()
| Standard_Boolean XCAFDoc_DimTolTool::GetDatumOfTolerLabels | ( | const TDF_Label & | theDimTolL, |
| TDF_LabelSequence & | theDatums | ||
| ) | const |
Returns all Datum labels defined for theDimTolL label.
◆ GetDatumWithObjectOfTolerLabels()
| Standard_Boolean XCAFDoc_DimTolTool::GetDatumWithObjectOfTolerLabels | ( | const TDF_Label & | theDimTolL, |
| TDF_LabelSequence & | theDatums | ||
| ) | const |
Returns all Datum labels with XCAFDimTolObjects_DatumObject defined for label theDimTolL.
◆ GetDimensionLabels()
| void XCAFDoc_DimTolTool::GetDimensionLabels | ( | TDF_LabelSequence & | theLabels | ) | const |
Returns a sequence of Dimension labels currently stored in the GD&T table.
◆ GetDimTol()
| Standard_Boolean XCAFDoc_DimTolTool::GetDimTol | ( | const TDF_Label & | theDimTolL, |
| Standard_Integer & | theKind, | ||
| Handle< TColStd_HArray1OfReal > & | theVal, | ||
| Handle< TCollection_HAsciiString > & | theName, | ||
| Handle< TCollection_HAsciiString > & | theDescription | ||
| ) | const |
Returns dimension tolerance assigned to theDimTolL label. Returns False if no such dimension tolerance is assigned.
◆ GetDimTolLabels()
| void XCAFDoc_DimTolTool::GetDimTolLabels | ( | TDF_LabelSequence & | Labels | ) | const |
Returns a sequence of D>s currently stored in the GD&T table.
◆ GetGDTPresentations()
| void XCAFDoc_DimTolTool::GetGDTPresentations | ( | NCollection_IndexedDataMap< TDF_Label, TopoDS_Shape, TDF_LabelMapHasher > & | theGDTLabelToShape | ) | const |
fill the map GDT label -> shape presentation
◆ GetGeomToleranceLabels()
| void XCAFDoc_DimTolTool::GetGeomToleranceLabels | ( | TDF_LabelSequence & | theLabels | ) | const |
Returns a sequence of Tolerance labels currently stored in the GD&T table.
◆ GetID()
|
static |
Returns the standard GD&T tool GUID.
◆ GetRefDatumLabel()
| Standard_Boolean XCAFDoc_DimTolTool::GetRefDatumLabel | ( | const TDF_Label & | theShapeL, |
| TDF_LabelSequence & | theDatum | ||
| ) | const |
Returns Datum label defined for theShapeL label.
◆ GetRefDimensionLabels()
| Standard_Boolean XCAFDoc_DimTolTool::GetRefDimensionLabels | ( | const TDF_Label & | theShapeL, |
| TDF_LabelSequence & | theDimensions | ||
| ) | const |
Returns all Dimension labels defined for theShapeL.
◆ GetRefGeomToleranceLabels()
| Standard_Boolean XCAFDoc_DimTolTool::GetRefGeomToleranceLabels | ( | const TDF_Label & | theShapeL, |
| TDF_LabelSequence & | theDimTols | ||
| ) | const |
Returns all GeomTolerance labels defined for theShapeL.
◆ GetRefShapeLabel()
| Standard_Boolean XCAFDoc_DimTolTool::GetRefShapeLabel | ( | const TDF_Label & | theL, |
| TDF_LabelSequence & | theShapeLFirst, | ||
| TDF_LabelSequence & | theShapeLSecond | ||
| ) | const |
Gets all shape labels reffered by theL label of the GD&T table. Returns False if there are no shape labels added to the sequences.
◆ GetTolerOfDatumLabels()
| Standard_Boolean XCAFDoc_DimTolTool::GetTolerOfDatumLabels | ( | const TDF_Label & | theDatumL, |
| TDF_LabelSequence & | theTols | ||
| ) | const |
Returns all GeomToleranses labels defined for theDatumL label.
◆ ID()
|
overridevirtual |
Returns the ID of the attribute.
Implements TDF_Attribute.
◆ IsDatum()
| Standard_Boolean XCAFDoc_DimTolTool::IsDatum | ( | const TDF_Label & | lab | ) | const |
Returns True if label belongs to the GD&T table and is a Datum definition.
◆ IsDimension()
| Standard_Boolean XCAFDoc_DimTolTool::IsDimension | ( | const TDF_Label & | theLab | ) | const |
Returns True if the label belongs to a GD&T table and is a Dimension definition.
◆ IsDimTol()
| Standard_Boolean XCAFDoc_DimTolTool::IsDimTol | ( | const TDF_Label & | theLab | ) | const |
Returns True if theLab belongs to the GD&T table and is a dmension tolerance.
◆ IsGeomTolerance()
| Standard_Boolean XCAFDoc_DimTolTool::IsGeomTolerance | ( | const TDF_Label & | theLab | ) | const |
Returns True if the label belongs to the GD&T table and is a dimension tolerance.
◆ IsLocked()
| Standard_Boolean XCAFDoc_DimTolTool::IsLocked | ( | const TDF_Label & | theViewL | ) | const |
Returns true if the given GDT is marked as locked.
◆ Lock()
| void XCAFDoc_DimTolTool::Lock | ( | const TDF_Label & | theViewL | ) | const |
Mark the given GDT as locked.
◆ NewEmpty()
|
overridevirtual |
Returns an new empty attribute from the good end type. It is used by the copy algorithm.
Implements TDF_Attribute.
◆ Paste()
|
overridevirtual |
This method is different from the "Copy" one, because it is used when copying an attribute from a source structure into a target structure. This method may paste the contents of <me> into <intoAttribute>.
The given pasted attribute can be full or empty of its contents. But don't make a NEW! Just set the contents!
It is possible to use <aRelocationTable> to get/set the relocation value of a source attribute.
Implements TDF_Attribute.
◆ Restore()
|
overridevirtual |
Restores the backuped contents from <anAttribute> into this one. It is used when aborting a transaction.
Implements TDF_Attribute.
◆ Set()
|
static |
Creates (if not exist) DimTolTool attribute.
◆ SetDatum() [1/2]
| void XCAFDoc_DimTolTool::SetDatum | ( | const TDF_LabelSequence & | theShapeLabels, |
| const TDF_Label & | theDatumL | ||
| ) | const |
Sets a datum to the sequence of shape labels.
◆ SetDatum() [2/2]
| void XCAFDoc_DimTolTool::SetDatum | ( | const TDF_Label & | theL, |
| const TDF_Label & | theTolerL, | ||
| const Handle< TCollection_HAsciiString > & | theName, | ||
| const Handle< TCollection_HAsciiString > & | theDescription, | ||
| const Handle< TCollection_HAsciiString > & | theIdentification | ||
| ) | const |
Sets a datum to theL label and binds it with theTolerL label. A datum with the specified name, description and identification is created if it isn't found in the GD&T table.
◆ SetDatumToGeomTol()
| void XCAFDoc_DimTolTool::SetDatumToGeomTol | ( | const TDF_Label & | theDatumL, |
| const TDF_Label & | theTolerL | ||
| ) | const |
Sets a datum from theDatumL label to theToletL label.
◆ SetDimension() [1/3]
| void XCAFDoc_DimTolTool::SetDimension | ( | const TDF_LabelSequence & | theFirstLS, |
| const TDF_LabelSequence & | theSecondLS, | ||
| const TDF_Label & | theDimL | ||
| ) | const |
Sets a dimension to sequences target labels.
◆ SetDimension() [2/3]
| void XCAFDoc_DimTolTool::SetDimension | ( | const TDF_Label & | theFirstL, |
| const TDF_Label & | theSecondL, | ||
| const TDF_Label & | theDimL | ||
| ) | const |
Sets a dimension to target labels.
◆ SetDimension() [3/3]
Sets a dimension to the target label.
◆ SetDimTol() [1/2]
Sets existing dimension tolerance to theL label.
◆ SetDimTol() [2/2]
| TDF_Label XCAFDoc_DimTolTool::SetDimTol | ( | const TDF_Label & | theL, |
| const Standard_Integer | theKind, | ||
| const Handle< TColStd_HArray1OfReal > & | theVal, | ||
| const Handle< TCollection_HAsciiString > & | theName, | ||
| const Handle< TCollection_HAsciiString > & | theDescription | ||
| ) | const |
Creates a dimension tolerance and sets it to theL label.
◆ SetGDTPresentations()
| void XCAFDoc_DimTolTool::SetGDTPresentations | ( | NCollection_IndexedDataMap< TDF_Label, TopoDS_Shape, TDF_LabelMapHasher > & | theGDTLabelToPrs | ) |
Set shape presentation for GDT labels according to given map (theGDTLabelToPrs) theGDTLabelToPrsName map is an additional argument, can be used to set presentation names. If label is not in the theGDTLabelToPrsName map, the presentation name will be empty.
◆ SetGeomTolerance() [1/2]
| void XCAFDoc_DimTolTool::SetGeomTolerance | ( | const TDF_Label & | theL, |
| const TDF_Label & | theGeomTolL | ||
| ) | const |
Sets a geometry tolerance from theGeomTolL to theL label. Checks if theGeomTolL is a geometry tolerance definition first.
◆ SetGeomTolerance() [2/2]
| void XCAFDoc_DimTolTool::SetGeomTolerance | ( | const TDF_LabelSequence & | theL, |
| const TDF_Label & | theGeomTolL | ||
| ) | const |
Sets a geometry tolerance from theGeomTolL to sequence of labels theL. Checks if theGeomTolL is a geometry tolerance definition first.
◆ ShapeTool()
| const Handle< XCAFDoc_ShapeTool >& XCAFDoc_DimTolTool::ShapeTool | ( | ) |
Returns internal XCAFDoc_ShapeTool tool.
◆ Unlock()
| void XCAFDoc_DimTolTool::Unlock | ( | const TDF_Label & | theViewL | ) | const |
Unlock the given GDT.
The documentation for this class was generated from the following file:
