Provides a tool to read IGES file and put it into DECAF document. Besides transfer of shapes (including assemblies) provided by IGESControl, supports also colors and part names IGESCAFControl_Reader reader; Methods for translation of an IGES file: reader.ReadFile("filename"); reader.Transfer(Document); or reader.Perform("filename",doc); Methods for managing reading attributes. Colors reader.SetColorMode(colormode); Standard_Boolean colormode = reader.GetColorMode(); Layers reader.SetLayerMode(layermode); Standard_Boolean layermode = reader.GetLayerMode(); Names reader.SetNameMode(namemode); Standard_Boolean namemode = reader.GetNameMode();. More...

#include <IGESCAFControl_Reader.hxx>

Inheritance diagram for IGESCAFControl_Reader:

[legend]

Public Member Functions
	IGESCAFControl_Reader ()
	Creates a reader with an empty IGES model and sets ColorMode, LayerMode and NameMode to Standard_True. More...

	IGESCAFControl_Reader (const Handle< XSControl_WorkSession > &theWS, const Standard_Boolean FromScratch=Standard_True)
	Creates a reader tool and attaches it to an already existing Session Clears the session if it was not yet set for IGES. More...

Standard_Boolean	Transfer (Handle< TDocStd_Document > &theDoc, const Message_ProgressRange &theProgress=Message_ProgressRange())
	Translates currently loaded IGES file into the document Returns True if succeeded, and False in case of fail. More...

Standard_Boolean	Perform (const TCollection_AsciiString &theFileName, Handle< TDocStd_Document > &theDoc, const Message_ProgressRange &theProgress=Message_ProgressRange())

Standard_Boolean	Perform (const Standard_CString theFileName, Handle< TDocStd_Document > &theDoc, const Message_ProgressRange &theProgress=Message_ProgressRange())
	Translate IGES file given by filename into the document Return True if succeeded, and False in case of fail. More...

void	SetColorMode (const Standard_Boolean theMode)
	Set ColorMode for indicate read Colors or not. More...

Standard_Boolean	GetColorMode () const

void	SetNameMode (const Standard_Boolean theMode)
	Set NameMode for indicate read Name or not. More...

Standard_Boolean	GetNameMode () const

void	SetLayerMode (const Standard_Boolean theMode)
	Set LayerMode for indicate read Layers or not. More...

Standard_Boolean	GetLayerMode () const

Public Member Functions inherited from IGESControl_Reader
	IGESControl_Reader ()
	Creates a Reader from scratch. More...

	IGESControl_Reader (const Handle< XSControl_WorkSession > &WS, const Standard_Boolean scratch=Standard_True)
	Creates a Reader from an already existing Session. More...

void	SetReadVisible (const Standard_Boolean ReadRoot)
	Set the transion of ALL Roots (if theReadOnlyVisible is False) or of Visible Roots (if theReadOnlyVisible is True) More...

Standard_Boolean	GetReadVisible () const

Handle< IGESData_IGESModel >	IGESModel () const
	Returns the model as a IGESModel. It can then be consulted (header, product) More...

virtual Standard_Integer	NbRootsForTransfer () override
	Determines the list of root entities from Model which are candidate for a transfer to a Shape (type of entities is PRODUCT) <theReadOnlyVisible> is taken into account to define roots. More...

void	PrintTransferInfo (const IFSelect_PrintFail failwarn, const IFSelect_PrintCount mode) const
	Prints Statistics and check list for Transfer. More...

Public Member Functions inherited from XSControl_Reader
	XSControl_Reader ()
	Creates a Reader from scratch (creates an empty WorkSession) A WorkSession or a Controller must be provided before running. More...

	XSControl_Reader (const Standard_CString norm)
	Creates a Reader from scratch, with a norm name which identifies a Controller. More...

	XSControl_Reader (const Handle< XSControl_WorkSession > &WS, const Standard_Boolean scratch=Standard_True)
	Creates a Reader from an already existing Session, with a Controller already set Virtual destructor. More...

virtual	~XSControl_Reader ()
	Empty virtual destructor. More...

Standard_Boolean	SetNorm (const Standard_CString norm)
	Sets a specific norm to <me> Returns True if done, False if <norm> is not available. More...

void	SetWS (const Handle< XSControl_WorkSession > &WS, const Standard_Boolean scratch=Standard_True)
	Sets a specific session to <me> More...

Handle< XSControl_WorkSession >	WS () const
	Returns the session used in <me> More...

IFSelect_ReturnStatus	ReadFile (const Standard_CString filename)
	Loads a file and returns the read status Zero for a Model which compies with the Controller. More...

IFSelect_ReturnStatus	ReadStream (const Standard_CString theName, std::istream &theIStream)
	Loads a file from stream and returns the read status. More...

Handle< Interface_InterfaceModel >	Model () const
	Returns the model. It can then be consulted (header, product) More...

Handle< TColStd_HSequenceOfTransient >	GiveList (const Standard_CString first="", const Standard_CString second="")
	Returns a list of entities from the IGES or STEP file according to the following rules: More...

Handle< TColStd_HSequenceOfTransient >	GiveList (const Standard_CString first, const Handle< Standard_Transient > &ent)
	Computes a List of entities from the model as follows <first> beeing a Selection, <ent> beeing an entity or a list of entities (as a HSequenceOfTransient) : the standard result of this selection applied to this list if <first> is erroneous, a null handle is returned. More...

Handle< Standard_Transient >	RootForTransfer (const Standard_Integer num=1)
	Returns an IGES or STEP root entity for translation. The entity is identified by its rank in a list. More...

Standard_Boolean	TransferOneRoot (const Standard_Integer num=1, const Message_ProgressRange &theProgress=Message_ProgressRange())
	Translates a root identified by the rank num in the model. false is returned if no shape is produced. More...

Standard_Boolean	TransferOne (const Standard_Integer num, const Message_ProgressRange &theProgress=Message_ProgressRange())
	Translates an IGES or STEP entity identified by the rank num in the model. false is returned if no shape is produced. More...

Standard_Boolean	TransferEntity (const Handle< Standard_Transient > &start, const Message_ProgressRange &theProgress=Message_ProgressRange())
	Translates an IGES or STEP entity in the model. true is returned if a shape is produced; otherwise, false is returned. More...

Standard_Integer	TransferList (const Handle< TColStd_HSequenceOfTransient > &list, const Message_ProgressRange &theProgress=Message_ProgressRange())
	Translates a list of entities. Returns the number of IGES or STEP entities that were successfully translated. The list can be produced with GiveList. Warning - This function does not clear the existing output shapes. More...

Standard_Integer	TransferRoots (const Message_ProgressRange &theProgress=Message_ProgressRange())
	Translates all translatable roots and returns the number of successful translations. Warning - This function clears existing output shapes first. More...

void	ClearShapes ()
	Clears the list of shapes that may have accumulated in calls to TransferOne or TransferRoot.C. More...

Standard_Integer	NbShapes () const
	Returns the number of shapes produced by translation. More...

TopoDS_Shape	Shape (const Standard_Integer num=1) const
	Returns the shape resulting from a translation and identified by the rank num. num equals 1 by default. In other words, the first shape resulting from the translation is returned. More...

TopoDS_Shape	OneShape () const
	Returns all of the results in a single shape which is: More...

void	PrintCheckLoad (const Standard_Boolean failsonly, const IFSelect_PrintCount mode) const
	Prints the check list attached to loaded data, on the Standard Trace File (starts at std::cout) All messages or fails only, according to <failsonly> mode = 0 : per entity, prints messages mode = 1 : per message, just gives count of entities per check mode = 2 : also gives entity numbers. More...

void	PrintCheckLoad (Standard_OStream &theStream, const Standard_Boolean failsonly, const IFSelect_PrintCount mode) const
	Prints the check list attached to loaded data. More...

void	PrintCheckTransfer (const Standard_Boolean failsonly, const IFSelect_PrintCount mode) const
	Displays check results for the last translation of IGES or STEP entities to Open CASCADE entities. Only fail messages are displayed if failsonly is true. All messages are displayed if failsonly is false. mode determines the contents and the order of the messages according to the terms of the IFSelect_PrintCount enumeration. More...

void	PrintCheckTransfer (Standard_OStream &theStream, const Standard_Boolean failsonly, const IFSelect_PrintCount mode) const
	Displays check results for the last translation of IGES or STEP entities to Open CASCADE entities. More...

void	PrintStatsTransfer (const Standard_Integer what, const Standard_Integer mode=0) const
	Displays the statistics for the last translation. what defines the kind of statistics that are displayed as follows: More...

void	PrintStatsTransfer (Standard_OStream &theStream, const Standard_Integer what, const Standard_Integer mode=0) const
	Displays the statistics for the last translation. More...

void	GetStatsTransfer (const Handle< TColStd_HSequenceOfTransient > &list, Standard_Integer &nbMapped, Standard_Integer &nbWithResult, Standard_Integer &nbWithFail) const
	Gives statistics about Transfer. More...

Additional Inherited Members
Protected Member Functions inherited from XSControl_Reader
TopTools_SequenceOfShape &	Shapes ()
	Returns a sequence of produced shapes. More...

Protected Attributes inherited from XSControl_Reader
Standard_Boolean	therootsta

TColStd_SequenceOfTransient	theroots

Detailed Description

Provides a tool to read IGES file and put it into DECAF document. Besides transfer of shapes (including assemblies) provided by IGESControl, supports also colors and part names IGESCAFControl_Reader reader; Methods for translation of an IGES file: reader.ReadFile("filename"); reader.Transfer(Document); or reader.Perform("filename",doc); Methods for managing reading attributes. Colors reader.SetColorMode(colormode); Standard_Boolean colormode = reader.GetColorMode(); Layers reader.SetLayerMode(layermode); Standard_Boolean layermode = reader.GetLayerMode(); Names reader.SetNameMode(namemode); Standard_Boolean namemode = reader.GetNameMode();.

Constructor & Destructor Documentation

◆ IGESCAFControl_Reader() [1/2]

IGESCAFControl_Reader::IGESCAFControl_Reader ( )

inline

Creates a reader with an empty IGES model and sets ColorMode, LayerMode and NameMode to Standard_True.

◆ IGESCAFControl_Reader() [2/2]

IGESCAFControl_Reader::IGESCAFControl_Reader	(	const Handle< XSControl_WorkSession > &	theWS,
		const Standard_Boolean	FromScratch = `Standard_True`
	)

inline

Creates a reader tool and attaches it to an already existing Session Clears the session if it was not yet set for IGES.

Member Function Documentation

◆ GetColorMode()

Standard_Boolean IGESCAFControl_Reader::GetColorMode ( ) const

inline

◆ GetLayerMode()

Standard_Boolean IGESCAFControl_Reader::GetLayerMode ( ) const

inline

◆ GetNameMode()

Standard_Boolean IGESCAFControl_Reader::GetNameMode ( ) const

inline

◆ Perform() [1/2]

Standard_Boolean IGESCAFControl_Reader::Perform	(	const TCollection_AsciiString &	theFileName,
		Handle< TDocStd_Document > &	theDoc,
		const Message_ProgressRange &	theProgress = `Message_ProgressRange()`
	)

inline

◆ Perform() [2/2]

Standard_Boolean IGESCAFControl_Reader::Perform	(	const Standard_CString	theFileName,
		Handle< TDocStd_Document > &	theDoc,
		const Message_ProgressRange &	theProgress = `Message_ProgressRange()`
	)

Translate IGES file given by filename into the document Return True if succeeded, and False in case of fail.

◆ SetColorMode()

void IGESCAFControl_Reader::SetColorMode ( const Standard_Boolean theMode )

inline

Set ColorMode for indicate read Colors or not.

◆ SetLayerMode()

void IGESCAFControl_Reader::SetLayerMode ( const Standard_Boolean theMode )

inline

Set LayerMode for indicate read Layers or not.

◆ SetNameMode()

void IGESCAFControl_Reader::SetNameMode ( const Standard_Boolean theMode )

inline

Set NameMode for indicate read Name or not.

◆ Transfer()

Standard_Boolean IGESCAFControl_Reader::Transfer	(	Handle< TDocStd_Document > &	theDoc,
		const Message_ProgressRange &	theProgress = `Message_ProgressRange()`
	)

Translates currently loaded IGES file into the document Returns True if succeeded, and False in case of fail.

The documentation for this class was generated from the following file:

IGESCAFControl_Reader.hxx

IGESCAFControl_Reader Class Reference

Public Member Functions

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ IGESCAFControl_Reader() [1/2]

◆ IGESCAFControl_Reader() [2/2]

Member Function Documentation

◆ GetColorMode()

◆ GetLayerMode()

◆ GetNameMode()

◆ Perform() [1/2]

◆ Perform() [2/2]

◆ SetColorMode()

◆ SetLayerMode()

◆ SetNameMode()

◆ Transfer()