Open CASCADE Technology  7.5.0
Public Member Functions | Static Public Member Functions | Protected Member Functions

XCAFApp_Application Class Reference

Implements an Application for the DECAF documents. More...

#include <XCAFApp_Application.hxx>

Inheritance diagram for XCAFApp_Application:
Inheritance graph
[legend]

Public Member Functions

virtual Standard_CString ResourcesName () override
 <>methods from TDocStd_Application More...
 
virtual void InitDocument (const Handle< TDocStd_Document > &aDoc) const override
 Set XCAFDoc_DocumentTool attribute. More...
 
void DumpJson (Standard_OStream &theOStream, Standard_Integer theDepth=-1) const
 Dumps the content of me into the stream. More...
 
- Public Member Functions inherited from TDocStd_Application
 TDocStd_Application ()
 Constructs the new instance and registers it in CDM_Session. More...
 
Standard_Boolean IsDriverLoaded () const
 Check if meta data driver was successfully loaded by the application constructor. More...
 
virtual Handle< Resource_ManagerResources () override
 Returns resource manager defining supported persistent formats. More...
 
void DefineFormat (const TCollection_AsciiString &theFormat, const TCollection_AsciiString &theDescription, const TCollection_AsciiString &theExtension, const Handle< PCDM_RetrievalDriver > &theReader, const Handle< PCDM_StorageDriver > &theWriter)
 Sets up resources and registers read and storage drivers for the specified format. More...
 
void ReadingFormats (TColStd_SequenceOfAsciiString &theFormats)
 Returns the sequence of reading formats supported by the application. More...
 
void WritingFormats (TColStd_SequenceOfAsciiString &theFormats)
 Returns the sequence of writing formats supported by the application. More...
 
Standard_Integer NbDocuments () const
 returns the number of documents handled by the current applicative session. More...
 
void GetDocument (const Standard_Integer index, Handle< TDocStd_Document > &aDoc) const
 Constructs the new document aDoc. aDoc is identified by the index index which is any integer between 1 and n where n is the number of documents returned by NbDocument. Example Handle(TDocStd_Application) anApp; if (!CafTest::Find(A)) return 1; Handle(TDocStd) aDoc; Standard_Integer nbdoc = anApp->NbDocuments(); for (Standard_Integer i = 1; i <= nbdoc; i++) { aApp->GetDocument(i,aDoc);. More...
 
virtual void NewDocument (const TCollection_ExtendedString &format, Handle< TDocStd_Document > &aDoc)
 Constructs the empty new document aDoc. This document will have the format format. If InitDocument is redefined for a specific application, the new document is handled by the applicative session. More...
 
void Close (const Handle< TDocStd_Document > &aDoc)
 Close the given document. the document is not any more handled by the applicative session. More...
 
Standard_Integer IsInSession (const TCollection_ExtendedString &path) const
 Returns an index for the document found in the path path in this applicative session. If the returned value is 0, the document is not present in the applicative session. This method can be used for the interactive part of an application. For instance, on a call to Open, the document to be opened may already be in memory. IsInSession checks to see if this is the case. Open can be made to depend on the value of the index returned: if IsInSession returns 0, the document is opened; if it returns another value, a message is displayed asking the user if he wants to override the version of the document in memory. Example: Standard_Integer insession = A->IsInSession(aDoc); if (insession > 0) { std::cout << "document " << insession << " is already in session" << std::endl; return 0; }. More...
 
PCDM_ReaderStatus Open (const TCollection_ExtendedString &path, Handle< TDocStd_Document > &aDoc, const Message_ProgressRange &theRange=Message_ProgressRange())
 Retrieves the document aDoc stored under the name aName in the directory directory. In order not to override a version of aDoc which is already in memory, this method can be made to depend on the value returned by IsInSession. More...
 
PCDM_ReaderStatus Open (Standard_IStream &theIStream, Handle< TDocStd_Document > &theDoc, const Message_ProgressRange &theRange=Message_ProgressRange())
 Retrieves aDoc from standard SEEKABLE stream theIStream. the stream should support SEEK fuctionality. More...
 
PCDM_StoreStatus SaveAs (const Handle< TDocStd_Document > &aDoc, const TCollection_ExtendedString &path, const Message_ProgressRange &theRange=Message_ProgressRange())
 Save the active document in the file <name> in the path <path> ; o verwrites the file if it already exists. More...
 
PCDM_StoreStatus SaveAs (const Handle< TDocStd_Document > &theDoc, Standard_OStream &theOStream, const Message_ProgressRange &theRange=Message_ProgressRange())
 Save theDoc to standard SEEKABLE stream theOStream. the stream should support SEEK fuctionality. More...
 
PCDM_StoreStatus Save (const Handle< TDocStd_Document > &aDoc, const Message_ProgressRange &theRange=Message_ProgressRange())
 Save aDoc active document. Exceptions: Standard_NotImplemented if the document was not retrieved in the applicative session by using Open. More...
 
PCDM_StoreStatus SaveAs (const Handle< TDocStd_Document > &aDoc, const TCollection_ExtendedString &path, TCollection_ExtendedString &theStatusMessage, const Message_ProgressRange &theRange=Message_ProgressRange())
 Save the active document in the file <name> in the path <path> . overwrite the file if it already exist. More...
 
PCDM_StoreStatus SaveAs (const Handle< TDocStd_Document > &theDoc, Standard_OStream &theOStream, TCollection_ExtendedString &theStatusMessage, const Message_ProgressRange &theRange=Message_ProgressRange())
 Save theDoc TO standard SEEKABLE stream theOStream. the stream should support SEEK fuctionality. More...
 
PCDM_StoreStatus Save (const Handle< TDocStd_Document > &aDoc, TCollection_ExtendedString &theStatusMessage, const Message_ProgressRange &theRange=Message_ProgressRange())
 Save the document overwriting the previous file. More...
 
virtual void OnOpenTransaction (const Handle< TDocStd_Document > &theDoc)
 Notification that is fired at each OpenTransaction event. More...
 
virtual void OnCommitTransaction (const Handle< TDocStd_Document > &theDoc)
 Notification that is fired at each CommitTransaction event. More...
 
virtual void OnAbortTransaction (const Handle< TDocStd_Document > &theDoc)
 Notification that is fired at each AbortTransaction event. More...
 
void DumpJson (Standard_OStream &theOStream, Standard_Integer theDepth=-1) const
 Dumps the content of me into the stream. More...
 
- Public Member Functions inherited from CDF_Application
void Open (const Handle< CDM_Document > &aDocument)
 puts the document in the current session directory and calls the virtual method Activate on it. More...
 
CDM_CanCloseStatus CanClose (const Handle< CDM_Document > &aDocument)
 
void Close (const Handle< CDM_Document > &aDocument)
 removes the document of the current session directory and closes the document; More...
 
Handle< CDM_DocumentRetrieve (const TCollection_ExtendedString &aFolder, const TCollection_ExtendedString &aName, const Standard_Boolean UseStorageConfiguration=Standard_True, const Message_ProgressRange &theRange=Message_ProgressRange())
 This method retrieves a document from the database. If the Document references other documents which have been updated, the latest version of these documents will be used if {UseStorageConfiguration} is Standard_True. The content of {aFolder}, {aName} and {aVersion} depends on the Database Manager system. If the DBMS is only based on the OS, {aFolder} is a directory and {aName} is the name of a file. In this case the use of the syntax with {aVersion} has no sense. For example: More...
 
Handle< CDM_DocumentRetrieve (const TCollection_ExtendedString &aFolder, const TCollection_ExtendedString &aName, const TCollection_ExtendedString &aVersion, const Standard_Boolean UseStorageConfiguration=Standard_True, const Message_ProgressRange &theRange=Message_ProgressRange())
 This method retrieves a document from the database. If the Document references other documents which have been updated, the latest version of these documents will be used if {UseStorageConfiguration} is Standard_True. – If the DBMS is only based on the OS, this syntax should not be used. More...
 
PCDM_ReaderStatus CanRetrieve (const TCollection_ExtendedString &aFolder, const TCollection_ExtendedString &aName)
 
PCDM_ReaderStatus CanRetrieve (const TCollection_ExtendedString &aFolder, const TCollection_ExtendedString &aName, const TCollection_ExtendedString &aVersion)
 
PCDM_ReaderStatus GetRetrieveStatus () const
 Checks status after Retrieve. More...
 
Handle< CDM_DocumentRead (Standard_IStream &theIStream, const Message_ProgressRange &theRange=Message_ProgressRange())
 Reads aDoc from standard SEEKABLE stream theIStream, the stream should support SEEK fuctionality. More...
 
virtual Handle< PCDM_ReaderReaderFromFormat (const TCollection_ExtendedString &aFormat)
 Returns instance of read driver for specified format. More...
 
virtual Handle< PCDM_StorageDriverWriterFromFormat (const TCollection_ExtendedString &aFormat)
 Returns instance of storage driver for specified format. More...
 
Standard_Boolean Format (const TCollection_ExtendedString &aFileName, TCollection_ExtendedString &theFormat)
 try to retrieve a Format directly in the file or in application resource by using extension. returns True if found; More...
 
Standard_ExtString DefaultFolder ()
 
Standard_Boolean SetDefaultFolder (const Standard_ExtString aFolder)
 
Handle< CDF_MetaDataDriverMetaDataDriver () const
 returns MetaDatdDriver of this application More...
 
- Public Member Functions inherited from CDM_Application
virtual Handle< Message_MessengerMessageDriver ()
 Returns default messenger;. More...
 
virtual void BeginOfUpdate (const Handle< CDM_Document > &aDocument)
 this method is called before the update of a document. By default, writes in MessageDriver(). More...
 
virtual void EndOfUpdate (const Handle< CDM_Document > &aDocument, const Standard_Boolean theStatus, const TCollection_ExtendedString &ErrorString)
 this method is called affter the update of a document. By default, writes in MessageDriver(). More...
 
void Write (const Standard_ExtString aString)
 writes the string in the application MessagerDriver. More...
 
virtual TCollection_ExtendedString Name () const
 Returns the application name. More...
 
virtual TCollection_AsciiString Version () const
 Returns the application version. More...
 
virtual CDM_MetaDataLookUpTableMetaDataLookUpTable ()
 Returns MetaData LookUpTable. More...
 
void DumpJson (Standard_OStream &theOStream, Standard_Integer theDepth=-1) const
 Dumps the content of me into the stream. More...
 
- Public Member Functions inherited from Standard_Transient
 Standard_Transient ()
 Empty constructor. More...
 
 Standard_Transient (const Standard_Transient &)
 Copy constructor – does nothing. More...
 
Standard_Transientoperator= (const Standard_Transient &)
 Assignment operator, needed to avoid copying reference counter. More...
 
virtual ~Standard_Transient ()
 Destructor must be virtual. More...
 
virtual void Delete () const
 Memory deallocator for transient classes. More...
 
virtual const opencascade::handle< Standard_Type > & DynamicType () const
 Returns a type descriptor about this object. More...
 
Standard_Boolean IsInstance (const opencascade::handle< Standard_Type > &theType) const
 Returns a true value if this is an instance of Type. More...
 
Standard_Boolean IsInstance (const Standard_CString theTypeName) const
 Returns a true value if this is an instance of TypeName. More...
 
Standard_Boolean IsKind (const opencascade::handle< Standard_Type > &theType) const
 Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...
 
Standard_Boolean IsKind (const Standard_CString theTypeName) const
 Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...
 
Standard_TransientThis () const
 Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero. More...
 
Standard_Integer GetRefCount () const
 Get the reference counter of this object. More...
 
void IncrementRefCounter () const
 Increments the reference counter of this object. More...
 
Standard_Integer DecrementRefCounter () const
 Decrements the reference counter of this object; returns the decremented value. More...
 

Static Public Member Functions

static Handle< XCAFApp_ApplicationGetApplication ()
 Initializes (for the first time) and returns the static object (XCAFApp_Application) This is the only valid method to get XCAFApp_Application object, and it should be called at least once before any actions with documents in order to init application. More...
 
- Static Public Member Functions inherited from CDF_Application
static Handle< CDF_ApplicationLoad (const Standard_GUID &aGUID)
 plugs an application. More...
 
- Static Public Member Functions inherited from Standard_Transient
static const char * get_type_name ()
 Returns a type descriptor about this object. More...
 
static const opencascade::handle< Standard_Type > & get_type_descriptor ()
 Returns type descriptor of Standard_Transient class. More...
 

Protected Member Functions

 XCAFApp_Application ()
 
- Protected Member Functions inherited from CDF_Application
 CDF_Application ()
 
- Protected Member Functions inherited from CDM_Application
 CDM_Application ()
 
void SetDocumentVersion (const Handle< CDM_Document > &aDocument, const Handle< CDM_MetaData > &aMetaData) const
 
void SetReferenceCounter (const Handle< CDM_Document > &aDocument, const Standard_Integer aReferenceCounter)
 

Additional Inherited Members

- Public Types inherited from Standard_Transient
typedef void base_type
 Returns a type descriptor about this object. More...
 
- Data Fields inherited from CDF_Application
Handle< CDF_MetaDataDrivermyMetaDataDriver
 
Handle< CDF_DirectorymyDirectory
 
- Protected Attributes inherited from TDocStd_Application
Handle< Resource_ManagermyResources
 
Standard_Boolean myIsDriverLoaded
 
- Protected Attributes inherited from CDF_Application
PCDM_ReaderStatus myRetrievableStatus
 
NCollection_IndexedDataMap< TCollection_ExtendedString, Handle< PCDM_RetrievalDriver > > myReaders
 
NCollection_IndexedDataMap< TCollection_ExtendedString, Handle< PCDM_StorageDriver > > myWriters
 

Detailed Description

Implements an Application for the DECAF documents.

Constructor & Destructor Documentation

◆ XCAFApp_Application()

XCAFApp_Application::XCAFApp_Application ( )
protected

Member Function Documentation

◆ DumpJson()

void XCAFApp_Application::DumpJson ( Standard_OStream theOStream,
Standard_Integer  theDepth = -1 
) const

Dumps the content of me into the stream.

◆ GetApplication()

static Handle< XCAFApp_Application > XCAFApp_Application::GetApplication ( )
static

Initializes (for the first time) and returns the static object (XCAFApp_Application) This is the only valid method to get XCAFApp_Application object, and it should be called at least once before any actions with documents in order to init application.

◆ InitDocument()

virtual void XCAFApp_Application::InitDocument ( const Handle< TDocStd_Document > &  aDoc) const
overridevirtual

Set XCAFDoc_DocumentTool attribute.

Reimplemented from TDocStd_Application.

◆ ResourcesName()

virtual Standard_CString XCAFApp_Application::ResourcesName ( )
overridevirtual

<>methods from TDocStd_Application

Reimplemented from TDocStd_Application.


The documentation for this class was generated from the following file: