The Curve from BRepAdaptor allows to use an Edge of the BRep topology like a 3D curve. More...

#include <BRepAdaptor_Curve.hxx>

Inheritance diagram for BRepAdaptor_Curve:

Public Member Functions
	BRepAdaptor_Curve ()
	Creates an undefined Curve with no Edge loaded. More...

	BRepAdaptor_Curve (const TopoDS_Edge &E)
	Creates a Curve to access the geometry of edge <E>. More...

	BRepAdaptor_Curve (const TopoDS_Edge &E, const TopoDS_Face &F)
	Creates a Curve to access the geometry of edge <E>. The geometry will be computed using the parametric curve of <E> on the face <F>. An Error is raised if the edge does not have a pcurve on the face. More...

virtual Handle< Adaptor3d_Curve >	ShallowCopy () const override
	Shallow copy of adaptor. More...

void	Reset ()
	Reset currently loaded curve (undone Load()). More...

void	Initialize (const TopoDS_Edge &E)
	Sets the Curve <me> to access the geometry of edge <E>. More...

void	Initialize (const TopoDS_Edge &E, const TopoDS_Face &F)
	Sets the Curve <me> to access the geometry of edge <E>. The geometry will be computed using the parametric curve of <E> on the face <F>. An Error is raised if the edge does not have a pcurve on the face. More...

const gp_Trsf &	Trsf () const
	Returns the coordinate system of the curve. More...

Standard_Boolean	Is3DCurve () const
	Returns True if the edge geometry is computed from a 3D curve. More...

Standard_Boolean	IsCurveOnSurface () const
	Returns True if the edge geometry is computed from a pcurve on a surface. More...

const GeomAdaptor_Curve &	Curve () const
	Returns the Curve of the edge. More...

const Adaptor3d_CurveOnSurface &	CurveOnSurface () const
	Returns the CurveOnSurface of the edge. More...

const TopoDS_Edge &	Edge () const
	Returns the edge. More...

Standard_Real	Tolerance () const
	Returns the edge tolerance. More...

Standard_Real	FirstParameter () const override

Standard_Real	LastParameter () const override

GeomAbs_Shape	Continuity () const override

Standard_Integer	NbIntervals (const GeomAbs_Shape S) const override
	Returns the number of intervals for continuity ~~. May be one if Continuity(me) >=~~ More...

void	Intervals (TColStd_Array1OfReal &T, const GeomAbs_Shape S) const override
	Stores in <T> the parameters bounding the intervals of continuity . More...

Handle< Adaptor3d_Curve >	Trim (const Standard_Real First, const Standard_Real Last, const Standard_Real Tol) const override
	Returns a curve equivalent of <me> between parameters <First> and <Last>. <Tol> is used to test for 3d points confusion. If <First> >= <Last> More...

Standard_Boolean	IsClosed () const override

Standard_Boolean	IsPeriodic () const override

Standard_Real	Period () const override

gp_Pnt	Value (const Standard_Real U) const override
	Computes the point of parameter U on the curve. More...

void	D0 (const Standard_Real U, gp_Pnt &P) const override
	Computes the point of parameter U. More...

void	D1 (const Standard_Real U, gp_Pnt &P, gp_Vec &V) const override
	Computes the point of parameter U on the curve with its first derivative. Raised if the continuity of the current interval is not C1. More...

void	D2 (const Standard_Real U, gp_Pnt &P, gp_Vec &V1, gp_Vec &V2) const override
	Returns the point P of parameter U, the first and second derivatives V1 and V2. Raised if the continuity of the current interval is not C2. More...

void	D3 (const Standard_Real U, gp_Pnt &P, gp_Vec &V1, gp_Vec &V2, gp_Vec &V3) const override
	Returns the point P of parameter U, the first, the second and the third derivative. Raised if the continuity of the current interval is not C3. More...

gp_Vec	DN (const Standard_Real U, const Standard_Integer N) const override
	The returned vector gives the value of the derivative for the order of derivation N. Raised if the continuity of the current interval is not CN. Raised if N < 1. More...

Standard_Real	Resolution (const Standard_Real R3d) const override
	returns the parametric resolution More...

GeomAbs_CurveType	GetType () const override
	Returns the type of the curve in the current interval : Line, Circle, Ellipse, Hyperbola, Parabola, BezierCurve, BSplineCurve, OtherCurve. More...

gp_Lin	Line () const override

gp_Circ	Circle () const override

gp_Elips	Ellipse () const override

gp_Hypr	Hyperbola () const override

gp_Parab	Parabola () const override

Standard_Integer	Degree () const override

Standard_Boolean	IsRational () const override

Standard_Integer	NbPoles () const override

Standard_Integer	NbKnots () const override

Handle< Geom_BezierCurve >	Bezier () const override
	Warning: This will make a copy of the Bezier Curve since it applies to it myTsrf. Be careful when using this method. More...

Handle< Geom_BSplineCurve >	BSpline () const override
	Warning: This will make a copy of the BSpline Curve since it applies to it myTsrf. Be careful when using this method. More...

Handle< Geom_OffsetCurve >	OffsetCurve () const override

Public Member Functions inherited from Adaptor3d_Curve
virtual	~Adaptor3d_Curve ()

Public Member Functions inherited from Standard_Transient
	Standard_Transient ()
	Empty constructor. More...

	Standard_Transient (const Standard_Transient &)
	Copy constructor – does nothing. More...

Standard_Transient &	operator= (const Standard_Transient &)
	Assignment operator, needed to avoid copying reference counter. More...

virtual	~Standard_Transient ()
	Destructor must be virtual. More...

virtual void	Delete () const
	Memory deallocator for transient classes. More...

virtual const opencascade::handle< Standard_Type > &	DynamicType () const
	Returns a type descriptor about this object. More...

Standard_Boolean	IsInstance (const opencascade::handle< Standard_Type > &theType) const
	Returns a true value if this is an instance of Type. More...

Standard_Boolean	IsInstance (const Standard_CString theTypeName) const
	Returns a true value if this is an instance of TypeName. More...

Standard_Boolean	IsKind (const opencascade::handle< Standard_Type > &theType) const
	Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...

Standard_Boolean	IsKind (const Standard_CString theTypeName) const
	Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...

Standard_Transient *	This () const
	Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero. More...

Standard_Integer	GetRefCount () const
	Get the reference counter of this object. More...

void	IncrementRefCounter () const
	Increments the reference counter of this object. More...

Standard_Integer	DecrementRefCounter () const
	Decrements the reference counter of this object; returns the decremented value. More...

Additional Inherited Members
Public Types inherited from Standard_Transient
typedef void	base_type
	Returns a type descriptor about this object. More...

Static Public Member Functions inherited from Standard_Transient
static const char *	get_type_name ()
	Returns a type descriptor about this object. More...

static const opencascade::handle< Standard_Type > &	get_type_descriptor ()
	Returns type descriptor of Standard_Transient class. More...

Detailed Description

The Curve from BRepAdaptor allows to use an Edge of the BRep topology like a 3D curve.

It has the methods the class Curve from Adaptor3d.

It is created or Initialized with an Edge. It takes into account local coordinate systems. If the Edge has a 3D curve it is use with priority. If the edge has no 3D curve one of the curves on surface is used. It is possible to enforce using a curve on surface by creating or initialising with an Edge and a Face.

Constructor & Destructor Documentation

◆ BRepAdaptor_Curve() [1/3]

BRepAdaptor_Curve::BRepAdaptor_Curve ( )

Creates an undefined Curve with no Edge loaded.

◆ BRepAdaptor_Curve() [2/3]

BRepAdaptor_Curve::BRepAdaptor_Curve ( const TopoDS_Edge & E )

Creates a Curve to access the geometry of edge <E>.

◆ BRepAdaptor_Curve() [3/3]

BRepAdaptor_Curve::BRepAdaptor_Curve	(	const TopoDS_Edge &	E,
		const TopoDS_Face &	F
	)

Creates a Curve to access the geometry of edge <E>. The geometry will be computed using the parametric curve of <E> on the face <F>. An Error is raised if the edge does not have a pcurve on the face.

Member Function Documentation

◆ Bezier()

Handle< Geom_BezierCurve > BRepAdaptor_Curve::Bezier ( ) const

overridevirtual

Warning: This will make a copy of the Bezier Curve since it applies to it myTsrf. Be careful when using this method.

Reimplemented from Adaptor3d_Curve.

◆ BSpline()

Handle< Geom_BSplineCurve > BRepAdaptor_Curve::BSpline ( ) const

overridevirtual

Warning: This will make a copy of the BSpline Curve since it applies to it myTsrf. Be careful when using this method.

Reimplemented from Adaptor3d_Curve.

◆ Circle()

gp_Circ BRepAdaptor_Curve::Circle ( ) const

overridevirtual

Reimplemented from Adaptor3d_Curve.

◆ Continuity()

GeomAbs_Shape BRepAdaptor_Curve::Continuity ( ) const

overridevirtual

Reimplemented from Adaptor3d_Curve.

◆ Curve()

const GeomAdaptor_Curve& BRepAdaptor_Curve::Curve ( ) const

Returns the Curve of the edge.

◆ CurveOnSurface()

const Adaptor3d_CurveOnSurface& BRepAdaptor_Curve::CurveOnSurface ( ) const

Returns the CurveOnSurface of the edge.

◆ D0()

void BRepAdaptor_Curve::D0	(	const Standard_Real	U,
		gp_Pnt &	P
	)		const

overridevirtual

Computes the point of parameter U.

Reimplemented from Adaptor3d_Curve.

◆ D1()

void BRepAdaptor_Curve::D1	(	const Standard_Real	U,
		gp_Pnt &	P,
		gp_Vec &	V
	)		const

overridevirtual

Computes the point of parameter U on the curve with its first derivative. Raised if the continuity of the current interval is not C1.

Reimplemented from Adaptor3d_Curve.

◆ D2()

void BRepAdaptor_Curve::D2	(	const Standard_Real	U,
		gp_Pnt &	P,
		gp_Vec &	V1,
		gp_Vec &	V2
	)		const

overridevirtual

Returns the point P of parameter U, the first and second derivatives V1 and V2. Raised if the continuity of the current interval is not C2.

Reimplemented from Adaptor3d_Curve.

◆ D3()

void BRepAdaptor_Curve::D3	(	const Standard_Real	U,
		gp_Pnt &	P,
		gp_Vec &	V1,
		gp_Vec &	V2,
		gp_Vec &	V3
	)		const

overridevirtual

Returns the point P of parameter U, the first, the second and the third derivative. Raised if the continuity of the current interval is not C3.

Reimplemented from Adaptor3d_Curve.

◆ Degree()

Standard_Integer BRepAdaptor_Curve::Degree ( ) const

overridevirtual

Reimplemented from Adaptor3d_Curve.

◆ DN()

gp_Vec BRepAdaptor_Curve::DN	(	const Standard_Real	U,
		const Standard_Integer	N
	)		const

overridevirtual

The returned vector gives the value of the derivative for the order of derivation N. Raised if the continuity of the current interval is not CN. Raised if N < 1.

Reimplemented from Adaptor3d_Curve.

◆ Edge()

const TopoDS_Edge& BRepAdaptor_Curve::Edge ( ) const

Returns the edge.

◆ Ellipse()

gp_Elips BRepAdaptor_Curve::Ellipse ( ) const

overridevirtual

Reimplemented from Adaptor3d_Curve.

◆ FirstParameter()

Standard_Real BRepAdaptor_Curve::FirstParameter ( ) const

overridevirtual

Reimplemented from Adaptor3d_Curve.

◆ GetType()

GeomAbs_CurveType BRepAdaptor_Curve::GetType ( ) const

overridevirtual

Returns the type of the curve in the current interval : Line, Circle, Ellipse, Hyperbola, Parabola, BezierCurve, BSplineCurve, OtherCurve.

Reimplemented from Adaptor3d_Curve.

◆ Hyperbola()

gp_Hypr BRepAdaptor_Curve::Hyperbola ( ) const

overridevirtual

Reimplemented from Adaptor3d_Curve.

◆ Initialize() [1/2]

void BRepAdaptor_Curve::Initialize ( const TopoDS_Edge & E )

Sets the Curve <me> to access the geometry of edge <E>.

◆ Initialize() [2/2]

void BRepAdaptor_Curve::Initialize	(	const TopoDS_Edge &	E,
		const TopoDS_Face &	F
	)

Sets the Curve <me> to access the geometry of edge <E>. The geometry will be computed using the parametric curve of <E> on the face <F>. An Error is raised if the edge does not have a pcurve on the face.

◆ Intervals()

void BRepAdaptor_Curve::Intervals	(	TColStd_Array1OfReal &	T,
		const GeomAbs_Shape	S
	)		const

overridevirtual

Stores in <T> the parameters bounding the intervals of continuity .

The array must provide enough room to accommodate for the parameters. i.e. T.Length() > NbIntervals()

Reimplemented from Adaptor3d_Curve.

◆ Is3DCurve()

Standard_Boolean BRepAdaptor_Curve::Is3DCurve ( ) const

Returns True if the edge geometry is computed from a 3D curve.

◆ IsClosed()

Standard_Boolean BRepAdaptor_Curve::IsClosed ( ) const

overridevirtual

Reimplemented from Adaptor3d_Curve.

◆ IsCurveOnSurface()

Standard_Boolean BRepAdaptor_Curve::IsCurveOnSurface ( ) const

Returns True if the edge geometry is computed from a pcurve on a surface.

◆ IsPeriodic()

Standard_Boolean BRepAdaptor_Curve::IsPeriodic ( ) const

overridevirtual

Reimplemented from Adaptor3d_Curve.

◆ IsRational()

Standard_Boolean BRepAdaptor_Curve::IsRational ( ) const

overridevirtual

Reimplemented from Adaptor3d_Curve.

◆ LastParameter()

Standard_Real BRepAdaptor_Curve::LastParameter ( ) const

overridevirtual

Reimplemented from Adaptor3d_Curve.

◆ Line()

gp_Lin BRepAdaptor_Curve::Line ( ) const

overridevirtual

Reimplemented from Adaptor3d_Curve.

◆ NbIntervals()

Standard_Integer BRepAdaptor_Curve::NbIntervals ( const GeomAbs_Shape S ) const

overridevirtual

Returns the number of intervals for continuity ~~. May be one if Continuity(me) >=~~

Reimplemented from Adaptor3d_Curve.

◆ NbKnots()

Standard_Integer BRepAdaptor_Curve::NbKnots ( ) const

overridevirtual

Reimplemented from Adaptor3d_Curve.

◆ NbPoles()

Standard_Integer BRepAdaptor_Curve::NbPoles ( ) const

overridevirtual

Reimplemented from Adaptor3d_Curve.

◆ OffsetCurve()

Handle< Geom_OffsetCurve > BRepAdaptor_Curve::OffsetCurve ( ) const

overridevirtual

Reimplemented from Adaptor3d_Curve.

◆ Parabola()

gp_Parab BRepAdaptor_Curve::Parabola ( ) const

overridevirtual

Reimplemented from Adaptor3d_Curve.

◆ Period()

Standard_Real BRepAdaptor_Curve::Period ( ) const

overridevirtual

Reimplemented from Adaptor3d_Curve.

◆ Reset()

void BRepAdaptor_Curve::Reset ( )

Reset currently loaded curve (undone Load()).

◆ Resolution()

Standard_Real BRepAdaptor_Curve::Resolution ( const Standard_Real R3d ) const

overridevirtual

returns the parametric resolution

Reimplemented from Adaptor3d_Curve.

◆ ShallowCopy()

virtual Handle< Adaptor3d_Curve > BRepAdaptor_Curve::ShallowCopy ( ) const

overridevirtual

Shallow copy of adaptor.

Reimplemented from Adaptor3d_Curve.

◆ Tolerance()

Standard_Real BRepAdaptor_Curve::Tolerance ( ) const

Returns the edge tolerance.

◆ Trim()

Handle< Adaptor3d_Curve > BRepAdaptor_Curve::Trim	(	const Standard_Real	First,
		const Standard_Real	Last,
		const Standard_Real	Tol
	)		const

overridevirtual

Returns a curve equivalent of <me> between parameters <First> and <Last>. <Tol> is used to test for 3d points confusion. If <First> >= <Last>

Reimplemented from Adaptor3d_Curve.

◆ Trsf()

const gp_Trsf& BRepAdaptor_Curve::Trsf ( ) const

Returns the coordinate system of the curve.

◆ Value()

gp_Pnt BRepAdaptor_Curve::Value ( const Standard_Real U ) const

overridevirtual

Computes the point of parameter U on the curve.

Reimplemented from Adaptor3d_Curve.

The documentation for this class was generated from the following file:

BRepAdaptor_Curve.hxx

BRepAdaptor_Curve Class Reference

Public Member Functions

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ BRepAdaptor_Curve() [1/3]

◆ BRepAdaptor_Curve() [2/3]

◆ BRepAdaptor_Curve() [3/3]

Member Function Documentation

◆ Bezier()

◆ BSpline()

◆ Circle()

◆ Continuity()

◆ Curve()

◆ CurveOnSurface()

◆ D0()

◆ D1()

◆ D2()

◆ D3()

◆ Degree()

◆ DN()

◆ Edge()

◆ Ellipse()

◆ FirstParameter()

◆ GetType()

◆ Hyperbola()

◆ Initialize() [1/2]

◆ Initialize() [2/2]

◆ Intervals()

◆ Is3DCurve()

◆ IsClosed()

◆ IsCurveOnSurface()

◆ IsPeriodic()

◆ IsRational()

◆ LastParameter()

◆ Line()

◆ NbIntervals()

◆ NbKnots()

◆ NbPoles()

◆ OffsetCurve()

◆ Parabola()

◆ Period()

◆ Reset()

◆ Resolution()

◆ ShallowCopy()

◆ Tolerance()

◆ Trim()

◆ Trsf()

◆ Value()