BRepPrimAPI_MakeCone Class Reference

Describes functions to build cones or portions of cones. A MakeCone object provides a framework for: More...

#include <BRepPrimAPI_MakeCone.hxx>

Inheritance diagram for BRepPrimAPI_MakeCone:

Public Member Functions
	BRepPrimAPI_MakeCone (const Standard_Real R1, const Standard_Real R2, const Standard_Real H)
	Make a cone. More...
	BRepPrimAPI_MakeCone (const Standard_Real R1, const Standard_Real R2, const Standard_Real H, const Standard_Real angle)
	Make a cone. More...
	BRepPrimAPI_MakeCone (const gp_Ax2 &Axes, const Standard_Real R1, const Standard_Real R2, const Standard_Real H)
	Make a cone. More...
	BRepPrimAPI_MakeCone (const gp_Ax2 &Axes, const Standard_Real R1, const Standard_Real R2, const Standard_Real H, const Standard_Real angle)
	Make a cone of height H radius R1 in the plane z = 0, R2 in the plane Z = H. R1 and R2 may be null. Take a section of <angle> Constructs a cone, or a portion of a cone, of height H, and radius R1 in the plane z = 0 and R2 in the plane z = H. The result is a sharp cone if R1 or R2 is equal to 0. The cone is constructed about the "Z Axis" of either: More...
Standard_Address	OneAxis ()
	Returns the algorithm. More...
BRepPrim_Cone &	Cone ()
	Returns the algorithm. More...
Public Member Functions inherited from BRepPrimAPI_MakeOneAxis
virtual void	Build (const Message_ProgressRange &theRange=Message_ProgressRange()) override
	Stores the solid in myShape. More...
const TopoDS_Face &	Face ()
	Returns the lateral face of the rotational primitive. More...
	operator TopoDS_Face ()
const TopoDS_Shell &	Shell ()
	Returns the constructed rotational primitive as a shell. More...
	operator TopoDS_Shell ()
const TopoDS_Solid &	Solid ()
	Returns the constructed rotational primitive as a solid. More...
	operator TopoDS_Solid ()
Public Member Functions inherited from BRepBuilderAPI_MakeShape
virtual const TopoDS_Shape &	Shape ()
	Returns a shape built by the shape construction algorithm. Raises exception StdFail_NotDone if the shape was not built. More...
	operator TopoDS_Shape ()
virtual const TopTools_ListOfShape &	Generated (const TopoDS_Shape &S)
	Returns the list of shapes generated from the shape . More...
virtual const TopTools_ListOfShape &	Modified (const TopoDS_Shape &S)
	Returns the list of shapes modified from the shape . More...
virtual Standard_Boolean	IsDeleted (const TopoDS_Shape &S)
	Returns true if the shape S has been deleted. More...
Public Member Functions inherited from BRepBuilderAPI_Command
virtual	~BRepBuilderAPI_Command ()
virtual Standard_Boolean	IsDone () const
void	Check () const
	Raises NotDone if done is false. More...

Additional Inherited Members
Protected Member Functions inherited from BRepBuilderAPI_MakeShape
	BRepBuilderAPI_MakeShape ()
Protected Member Functions inherited from BRepBuilderAPI_Command
	BRepBuilderAPI_Command ()
	Set done to False. More...
void	Done ()
	Set done to true. More...
void	NotDone ()
	Set done to false. More...
Protected Attributes inherited from BRepBuilderAPI_MakeShape
TopoDS_Shape	myShape
TopTools_ListOfShape	myGenerated

Detailed Description

Describes functions to build cones or portions of cones. A MakeCone object provides a framework for:

• defining the construction of a cone,
• implementing the construction algorithm, and
• consulting the result.

Constructor & Destructor Documentation

BRepPrimAPI_MakeCone() [1/4]

BRepPrimAPI_MakeCone::BRepPrimAPI_MakeCone	(	const Standard_Real	R1,
		const Standard_Real	R2,
		const Standard_Real	H
	)

Make a cone.

Parameters

R1	[in] cone bottom radius, may be null (z = 0)
R2	[in] cone top radius, may be null (z = H)
H	[in] cone height

BRepPrimAPI_MakeCone() [2/4]

BRepPrimAPI_MakeCone::BRepPrimAPI_MakeCone	(	const Standard_Real	R1,
		const Standard_Real	R2,
		const Standard_Real	H,
		const Standard_Real	angle
	)

Make a cone.

Parameters

R1	[in] cone bottom radius, may be null (z = 0)
R2	[in] cone top radius, may be null (z = H)
H	[in] cone height
angle	[in] angle to create a part cone

BRepPrimAPI_MakeCone() [3/4]

BRepPrimAPI_MakeCone::BRepPrimAPI_MakeCone	(	const gp_Ax2 &	Axes,
		const Standard_Real	R1,
		const Standard_Real	R2,
		const Standard_Real	H
	)

Make a cone.

Parameters

axes	[in] coordinate system for the construction of the cone
R1	[in] cone bottom radius, may be null (z = 0)
R2	[in] cone top radius, may be null (z = H)
H	[in] cone height

BRepPrimAPI_MakeCone() [4/4]

BRepPrimAPI_MakeCone::BRepPrimAPI_MakeCone	(	const gp_Ax2 &	Axes,
		const Standard_Real	R1,
		const Standard_Real	R2,
		const Standard_Real	H,
		const Standard_Real	angle
	)

Make a cone of height H radius R1 in the plane z = 0, R2 in the plane Z = H. R1 and R2 may be null. Take a section of <angle> Constructs a cone, or a portion of a cone, of height H, and radius R1 in the plane z = 0 and R2 in the plane z = H. The result is a sharp cone if R1 or R2 is equal to 0. The cone is constructed about the "Z Axis" of either:

• the global coordinate system, or
• the local coordinate system Axes. It is limited in these coordinate systems as follows:
• in the v parametric direction (the Z coordinate), by the two parameter values 0 and H,
• and in the u parametric direction (defined by the angle of rotation around the Z axis), in the case of a portion of a cone, by the two parameter values 0 and angle. Angle is given in radians. The resulting shape is composed of:
• a lateral conical face
• two planar faces in the planes z = 0 and z = H, or only one planar face in one of these two planes if a radius value is null (in the case of a complete cone, these faces are circles), and
• and in the case of a portion of a cone, two planar faces to close the shape. (either two parallelograms or two triangles, in the planes u = 0 and u = angle). Exceptions Standard_DomainError if:
• H is less than or equal to Precision::Confusion(), or
• the half-angle at the apex of the cone, defined by R1, R2 and H, is less than Precision::Confusion()/H, or greater than (Pi/2)-Precision::Confusion()/H.f

Member Function Documentation

Cone()

BRepPrim_Cone& BRepPrimAPI_MakeCone::Cone

(

)

Returns the algorithm.

OneAxis()

Standard_Address BRepPrimAPI_MakeCone::OneAxis ( )

virtual

Returns the algorithm.

Implements BRepPrimAPI_MakeOneAxis.

---

The documentation for this class was generated from the following file:

• BRepPrimAPI_MakeCone.hxx