The BRepTools package provides utilities for BRep data structures. More...

#include <BRepTools.hxx>

Static Public Member Functions
static void	UVBounds (const TopoDS_Face &F, Standard_Real &UMin, Standard_Real &UMax, Standard_Real &VMin, Standard_Real &VMax)
	Returns in UMin, UMax, VMin, VMax the bounding values in the parametric space of F. More...

static void	UVBounds (const TopoDS_Face &F, const TopoDS_Wire &W, Standard_Real &UMin, Standard_Real &UMax, Standard_Real &VMin, Standard_Real &VMax)
	Returns in UMin, UMax, VMin, VMax the bounding values of the wire in the parametric space of F. More...

static void	UVBounds (const TopoDS_Face &F, const TopoDS_Edge &E, Standard_Real &UMin, Standard_Real &UMax, Standard_Real &VMin, Standard_Real &VMax)
	Returns in UMin, UMax, VMin, VMax the bounding values of the edge in the parametric space of F. More...

static void	AddUVBounds (const TopoDS_Face &F, Bnd_Box2d &B)
	Adds to the box the bounding values in the parametric space of F. More...

static void	AddUVBounds (const TopoDS_Face &F, const TopoDS_Wire &W, Bnd_Box2d &B)
	Adds to the box the bounding values of the wire in the parametric space of F. More...

static void	AddUVBounds (const TopoDS_Face &F, const TopoDS_Edge &E, Bnd_Box2d &B)
	Adds to the box the bounding values of the edge in the parametric space of F. More...

static void	Update (const TopoDS_Vertex &V)
	Update a vertex (nothing is done) More...

static void	Update (const TopoDS_Edge &E)
	Update an edge, compute 2d bounding boxes. More...

static void	Update (const TopoDS_Wire &W)
	Update a wire (nothing is done) More...

static void	Update (const TopoDS_Face &F)
	Update a Face, update UV points. More...

static void	Update (const TopoDS_Shell &S)
	Update a shell (nothing is done) More...

static void	Update (const TopoDS_Solid &S)
	Update a solid (nothing is done) More...

static void	Update (const TopoDS_CompSolid &C)
	Update a composite solid (nothing is done) More...

static void	Update (const TopoDS_Compound &C)
	Update a compound (nothing is done) More...

static void	Update (const TopoDS_Shape &S)
	Update a shape, call the correct update. More...

static void	UpdateFaceUVPoints (const TopoDS_Face &theF)
	For each edge of the face <F> reset the UV points to the bounding points of the parametric curve of the edge on the face. More...

static void	Clean (const TopoDS_Shape &theShape, const Standard_Boolean theForce=Standard_False)
	Removes all cached polygonal representation of the shape, i.e. the triangulations of the faces of ~~and polygons on triangulations and polygons 3d of the edges. In case polygonal representation is the only available representation for the shape (shape does not have geometry) it is not removed.~~ More...

static void	CleanGeometry (const TopoDS_Shape &theShape)
	Removes geometry (curves and surfaces) from all edges and faces of the shape. More...

static void	RemoveUnusedPCurves (const TopoDS_Shape &S)
	Removes all the pcurves of the edges of ~~that refer to surfaces not belonging to any face of~~ More...

static Standard_Boolean	Triangulation (const TopoDS_Shape &theShape, const Standard_Real theLinDefl, const Standard_Boolean theToCheckFreeEdges=Standard_False)
	Verifies that each Face from the shape has got a triangulation with a deflection smaller or equal to specified one and the Edges a discretization on this triangulation. More...

static Standard_Boolean	LoadTriangulation (const TopoDS_Shape &theShape, const Standard_Integer theTriangulationIdx=-1, const Standard_Boolean theToSetAsActive=Standard_False, const Handle< OSD_FileSystem > &theFileSystem=Handle< OSD_FileSystem >())
	Loads triangulation data for each face of the shape from some deferred storage using specified shared input file system. More...

static Standard_Boolean	UnloadTriangulation (const TopoDS_Shape &theShape, const Standard_Integer theTriangulationIdx=-1)
	Releases triangulation data for each face of the shape if there is deferred storage to load it later. More...

static Standard_Boolean	ActivateTriangulation (const TopoDS_Shape &theShape, const Standard_Integer theTriangulationIdx, const Standard_Boolean theToActivateStrictly=false)
	Activates triangulation data for each face of the shape from some deferred storage using specified shared input file system. More...

static Standard_Boolean	LoadAllTriangulations (const TopoDS_Shape &theShape, const Handle< OSD_FileSystem > &theFileSystem=Handle< OSD_FileSystem >())
	Loads all available triangulations for each face of the shape from some deferred storage using specified shared input file system. More...

static Standard_Boolean	UnloadAllTriangulations (const TopoDS_Shape &theShape)
	Releases all available triangulations for each face of the shape if there is deferred storage to load them later. More...

static Standard_Boolean	Compare (const TopoDS_Vertex &V1, const TopoDS_Vertex &V2)
	Returns True if the distance between the two vertices is lower than their tolerance. More...

static Standard_Boolean	Compare (const TopoDS_Edge &E1, const TopoDS_Edge &E2)
	Returns True if the distance between the two edges is lower than their tolerance. More...

static TopoDS_Wire	OuterWire (const TopoDS_Face &F)
	Returns the outer most wire of <F>. Returns a Null wire if <F> has no wires. More...

static void	Map3DEdges (const TopoDS_Shape &S, TopTools_IndexedMapOfShape &M)
	Stores in the map <M> all the 3D topology edges of . More...

static Standard_Boolean	IsReallyClosed (const TopoDS_Edge &E, const TopoDS_Face &F)
	Verifies that the edge <E> is found two times on the face <F> before calling BRep_Tool::IsClosed. More...

static void	DetectClosedness (const TopoDS_Face &theFace, Standard_Boolean &theUclosed, Standard_Boolean &theVclosed)
	Detect closedness of face in U and V directions. More...

static void	Dump (const TopoDS_Shape &Sh, Standard_OStream &S)
	Dumps the topological structure and the geometry of <Sh> on the stream . More...

static void	Write (const TopoDS_Shape &theShape, Standard_OStream &theStream, const Message_ProgressRange &theProgress=Message_ProgressRange())
	Writes the shape to the stream in an ASCII format TopTools_FormatVersion_VERSION_1. This alias writes shape with triangulation data. More...

static void	Write (const TopoDS_Shape &theShape, Standard_OStream &theStream, const Standard_Boolean theWithTriangles, const Standard_Boolean theWithNormals, const TopTools_FormatVersion theVersion, const Message_ProgressRange &theProgress=Message_ProgressRange())
	Writes the shape to the stream in an ASCII format of specified version. More...

static void	Read (TopoDS_Shape &Sh, Standard_IStream &S, const BRep_Builder &B, const Message_ProgressRange &theProgress=Message_ProgressRange())
	Reads a Shape from in returns it in <Sh>. is used to build the shape. More...

static Standard_Boolean	Write (const TopoDS_Shape &theShape, const Standard_CString theFile, const Message_ProgressRange &theProgress=Message_ProgressRange())
	Writes the shape to the file in an ASCII format TopTools_FormatVersion_VERSION_1. This alias writes shape with triangulation data. More...

static Standard_Boolean	Write (const TopoDS_Shape &theShape, const Standard_CString theFile, const Standard_Boolean theWithTriangles, const Standard_Boolean theWithNormals, const TopTools_FormatVersion theVersion, const Message_ProgressRange &theProgress=Message_ProgressRange())
	Writes the shape to the file in an ASCII format of specified version. More...

static Standard_Boolean	Read (TopoDS_Shape &Sh, const Standard_CString File, const BRep_Builder &B, const Message_ProgressRange &theProgress=Message_ProgressRange())
	Reads a Shape from <File>, returns it in <Sh>. is used to build the shape. More...

static Standard_Real	EvalAndUpdateTol (const TopoDS_Edge &theE, const Handle< Geom_Curve > &theC3d, const Handle< Geom2d_Curve > theC2d, const Handle< Geom_Surface > &theS, const Standard_Real theF, const Standard_Real theL)
	Evals real tolerance of edge <theE>. <theC3d>, <theC2d>, <theS>, <theF>, <theL> are correspondently 3d curve of edge, 2d curve on surface <theS> and rang of edge If calculated tolerance is more then current edge tolerance, edge is updated. Method returns actual tolerance of edge. More...

static TopAbs_Orientation	OriEdgeInFace (const TopoDS_Edge &theEdge, const TopoDS_Face &theFace)
	returns the cumul of the orientation of <Edge> and thc containing wire in <Face> More...

static void	RemoveInternals (TopoDS_Shape &theS, const Standard_Boolean theForce=Standard_False)
	Removes internal sub-shapes from the shape. The check on internal status is based on orientation of sub-shapes, classification is not performed. Before removal of internal sub-shapes the algorithm checks if such removal is not going to break topological connectivity between sub-shapes. The flag <theForce> if set to true disables the connectivity check and clears the given shape from all sub-shapes with internal orientation. More...

static void	CheckLocations (const TopoDS_Shape &theS, TopTools_ListOfShape &theProblemShapes)
	Check all locations of shape according criterium: aTrsf.IsNegative() \|\| (Abs(Abs(aTrsf.ScaleFactor()) - 1.) > TopLoc_Location::ScalePrec()) All sub-shapes having such locations are put in list theProblemShapes. More...

Detailed Description

The BRepTools package provides utilities for BRep data structures.

WireExplorer : A tool to explore the topology of a wire in the order of the edges.
ShapeSet : Tools used for dumping, writing and reading.
UVBounds : Methods to compute the limits of the boundary of a face, a wire or an edge in the parametric space of a face.
Update : Methods to call when a topology has been created to compute all missing data.
UpdateFaceUVPoints: Method to update the UV points stored with the edges on a face.
Compare : Method to compare two vertices.
Compare : Method to compare two edges.
OuterWire : A method to find the outer wire of a face.
Map3DEdges : A method to map all the 3D Edges of a Shape.
Dump : A method to dump a BRep object.

Member Function Documentation

◆ ActivateTriangulation()

static Standard_Boolean BRepTools::ActivateTriangulation	(	const TopoDS_Shape &	theShape,
		const Standard_Integer	theTriangulationIdx,
		const Standard_Boolean	theToActivateStrictly = `false`
	)

static

Activates triangulation data for each face of the shape from some deferred storage using specified shared input file system.

Parameters

theShape	[in] shape to activate triangulations
theTriangulationIdx	[in] index defining what triangulation should be activated. Starts from 0. Exception will be thrown in case of invalid negative index
theToActivateStrictly	[in] flag to activate exactly triangulation with defined theTriangulationIdx index. In TRUE case if some face doesn't contain triangulation with this index, active triangulation will not be changed for it. Else the last available triangulation will be activated.

Returns: TRUE if at least one active triangulation was changed.

◆ AddUVBounds() [1/3]

static void BRepTools::AddUVBounds	(	const TopoDS_Face &	F,
		Bnd_Box2d &	B
	)

static

Adds to the box the bounding values in the parametric space of F.

◆ AddUVBounds() [2/3]

static void BRepTools::AddUVBounds	(	const TopoDS_Face &	F,
		const TopoDS_Edge &	E,
		Bnd_Box2d &	B
	)

static

Adds to the box the bounding values of the edge in the parametric space of F.

◆ AddUVBounds() [3/3]

static void BRepTools::AddUVBounds	(	const TopoDS_Face &	F,
		const TopoDS_Wire &	W,
		Bnd_Box2d &	B
	)

static

Adds to the box the bounding values of the wire in the parametric space of F.

◆ CheckLocations()

static void BRepTools::CheckLocations	(	const TopoDS_Shape &	theS,
		TopTools_ListOfShape &	theProblemShapes
	)

static

Check all locations of shape according criterium: aTrsf.IsNegative() || (Abs(Abs(aTrsf.ScaleFactor()) - 1.) > TopLoc_Location::ScalePrec()) All sub-shapes having such locations are put in list theProblemShapes.

◆ Clean()

static void BRepTools::Clean	(	const TopoDS_Shape &	theShape,
		const Standard_Boolean	theForce = `Standard_False`
	)

static

Removes all cached polygonal representation of the shape, i.e. the triangulations of the faces of ~~and polygons on triangulations and polygons 3d of the edges. In case polygonal representation is the only available representation for the shape (shape does not have geometry) it is not removed.~~

Parameters

theShape	[in] the shape to clean
theForce	[in] allows removing all polygonal representations from the shape, including polygons on triangulations irrelevant for the faces of the given shape.

◆ CleanGeometry()

static void BRepTools::CleanGeometry ( const TopoDS_Shape & theShape )

static

Removes geometry (curves and surfaces) from all edges and faces of the shape.

◆ Compare() [1/2]

static Standard_Boolean BRepTools::Compare	(	const TopoDS_Edge &	E1,
		const TopoDS_Edge &	E2
	)

static

Returns True if the distance between the two edges is lower than their tolerance.

◆ Compare() [2/2]

static Standard_Boolean BRepTools::Compare	(	const TopoDS_Vertex &	V1,
		const TopoDS_Vertex &	V2
	)

static

Returns True if the distance between the two vertices is lower than their tolerance.

◆ DetectClosedness()

static void BRepTools::DetectClosedness	(	const TopoDS_Face &	theFace,
		Standard_Boolean &	theUclosed,
		Standard_Boolean &	theVclosed
	)

static

Detect closedness of face in U and V directions.

◆ Dump()

static void BRepTools::Dump	(	const TopoDS_Shape &	Sh,
		Standard_OStream &	S
	)

static

Dumps the topological structure and the geometry of <Sh> on the stream .

◆ EvalAndUpdateTol()

static Standard_Real BRepTools::EvalAndUpdateTol	(	const TopoDS_Edge &	theE,
		const Handle< Geom_Curve > &	theC3d,
		const Handle< Geom2d_Curve >	theC2d,
		const Handle< Geom_Surface > &	theS,
		const Standard_Real	theF,
		const Standard_Real	theL
	)

static

Evals real tolerance of edge <theE>. <theC3d>, <theC2d>, <theS>, <theF>, <theL> are correspondently 3d curve of edge, 2d curve on surface <theS> and rang of edge If calculated tolerance is more then current edge tolerance, edge is updated. Method returns actual tolerance of edge.

◆ IsReallyClosed()

static Standard_Boolean BRepTools::IsReallyClosed	(	const TopoDS_Edge &	E,
		const TopoDS_Face &	F
	)

static

Verifies that the edge <E> is found two times on the face <F> before calling BRep_Tool::IsClosed.

◆ LoadAllTriangulations()

static Standard_Boolean BRepTools::LoadAllTriangulations	(	const TopoDS_Shape &	theShape,
		const Handle< OSD_FileSystem > &	theFileSystem = `Handle< OSD_FileSystem >()`
	)

static

Loads all available triangulations for each face of the shape from some deferred storage using specified shared input file system.

Parameters

theShape	[in] shape to load triangulations
theFileSystem	[in] shared file system

Returns: TRUE if at least one triangulation is loaded.

◆ LoadTriangulation()

static Standard_Boolean BRepTools::LoadTriangulation	(	const TopoDS_Shape &	theShape,
		const Standard_Integer	theTriangulationIdx = `-1`,
		const Standard_Boolean	theToSetAsActive = `Standard_False`,
		const Handle< OSD_FileSystem > &	theFileSystem = `Handle< OSD_FileSystem >()`
	)

static

Loads triangulation data for each face of the shape from some deferred storage using specified shared input file system.

Parameters

theShape	[in] shape to load triangulations
theTriangulationIdx	[in] index defining what triangulation should be loaded. Starts from 0. -1 is used in specific case to load currently already active triangulation. If some face doesn't contain triangulation with this index, nothing will be loaded for it. Exception will be thrown in case of invalid negative index
theToSetAsActive	[in] flag to activate triangulation after its loading
theFileSystem	[in] shared file system

Returns: TRUE if at least one triangulation is loaded.

◆ Map3DEdges()

static void BRepTools::Map3DEdges	(	const TopoDS_Shape &	S,
		TopTools_IndexedMapOfShape &	M
	)

static

Stores in the map <M> all the 3D topology edges of .

◆ OriEdgeInFace()

static TopAbs_Orientation BRepTools::OriEdgeInFace	(	const TopoDS_Edge &	theEdge,
		const TopoDS_Face &	theFace
	)

static

returns the cumul of the orientation of <Edge> and thc containing wire in <Face>

◆ OuterWire()

static TopoDS_Wire BRepTools::OuterWire ( const TopoDS_Face & F )

static

Returns the outer most wire of <F>. Returns a Null wire if <F> has no wires.

◆ Read() [1/2]

static Standard_Boolean BRepTools::Read	(	TopoDS_Shape &	Sh,
		const Standard_CString	File,
		const BRep_Builder &	B,
		const Message_ProgressRange &	theProgress = `Message_ProgressRange()`
	)

static

Reads a Shape from <File>, returns it in <Sh>. is used to build the shape.

◆ Read() [2/2]

static void BRepTools::Read	(	TopoDS_Shape &	Sh,
		Standard_IStream &	S,
		const BRep_Builder &	B,
		const Message_ProgressRange &	theProgress = `Message_ProgressRange()`
	)

static

Reads a Shape from in returns it in <Sh>. is used to build the shape.

◆ RemoveInternals()

static void BRepTools::RemoveInternals	(	TopoDS_Shape &	theS,
		const Standard_Boolean	theForce = `Standard_False`
	)

static

Removes internal sub-shapes from the shape. The check on internal status is based on orientation of sub-shapes, classification is not performed. Before removal of internal sub-shapes the algorithm checks if such removal is not going to break topological connectivity between sub-shapes. The flag <theForce> if set to true disables the connectivity check and clears the given shape from all sub-shapes with internal orientation.

◆ RemoveUnusedPCurves()

static void BRepTools::RemoveUnusedPCurves ( const TopoDS_Shape & S )

static

Removes all the pcurves of the edges of ~~that refer to surfaces not belonging to any face of~~

◆ Triangulation()

static Standard_Boolean BRepTools::Triangulation	(	const TopoDS_Shape &	theShape,
		const Standard_Real	theLinDefl,
		const Standard_Boolean	theToCheckFreeEdges = `Standard_False`
	)

static

Verifies that each Face from the shape has got a triangulation with a deflection smaller or equal to specified one and the Edges a discretization on this triangulation.

Parameters

theShape	[in] shape to verify
theLinDefl	[in] maximum allowed linear deflection
theToCheckFreeEdges	[in] if TRUE, then free Edges are required to have 3D polygon

Returns: FALSE if input Shape contains Faces without triangulation, or that triangulation has worse (greater) deflection than specified one, or Edges in Shape lack polygons on triangulation or free Edges in Shape lack 3D polygons

◆ UnloadAllTriangulations()

static Standard_Boolean BRepTools::UnloadAllTriangulations ( const TopoDS_Shape & theShape )

static

Releases all available triangulations for each face of the shape if there is deferred storage to load them later.

Parameters

theShape [in] shape to unload triangulations

Returns: TRUE if at least one triangulation is unloaded.

◆ UnloadTriangulation()

static Standard_Boolean BRepTools::UnloadTriangulation	(	const TopoDS_Shape &	theShape,
		const Standard_Integer	theTriangulationIdx = `-1`
	)

static

Releases triangulation data for each face of the shape if there is deferred storage to load it later.

Parameters

theShape	[in] shape to unload triangulations
theTriangulationIdx	[in] index defining what triangulation should be unloaded. Starts from 0. -1 is used in specific case to unload currently already active triangulation. If some face doesn't contain triangulation with this index, nothing will be unloaded for it. Exception will be thrown in case of invalid negative index

Returns: TRUE if at least one triangulation is unloaded.

◆ Update() [1/9]

static void BRepTools::Update ( const TopoDS_Compound & C )

static

Update a compound (nothing is done)

◆ Update() [2/9]

static void BRepTools::Update ( const TopoDS_CompSolid & C )

static

Update a composite solid (nothing is done)

◆ Update() [3/9]

static void BRepTools::Update ( const TopoDS_Edge & E )

static

Update an edge, compute 2d bounding boxes.

◆ Update() [4/9]

static void BRepTools::Update ( const TopoDS_Face & F )

static

Update a Face, update UV points.

◆ Update() [5/9]

static void BRepTools::Update ( const TopoDS_Shape & S )

static

Update a shape, call the correct update.

◆ Update() [6/9]

static void BRepTools::Update ( const TopoDS_Shell & S )

static

Update a shell (nothing is done)

◆ Update() [7/9]

static void BRepTools::Update ( const TopoDS_Solid & S )

static

Update a solid (nothing is done)

◆ Update() [8/9]

static void BRepTools::Update ( const TopoDS_Vertex & V )

static

Update a vertex (nothing is done)

◆ Update() [9/9]

static void BRepTools::Update ( const TopoDS_Wire & W )

static

Update a wire (nothing is done)

◆ UpdateFaceUVPoints()

static void BRepTools::UpdateFaceUVPoints ( const TopoDS_Face & theF )

static

For each edge of the face <F> reset the UV points to the bounding points of the parametric curve of the edge on the face.

◆ UVBounds() [1/3]

static void BRepTools::UVBounds	(	const TopoDS_Face &	F,
		const TopoDS_Edge &	E,
		Standard_Real &	UMin,
		Standard_Real &	UMax,
		Standard_Real &	VMin,
		Standard_Real &	VMax
	)

static

Returns in UMin, UMax, VMin, VMax the bounding values of the edge in the parametric space of F.

◆ UVBounds() [2/3]

static void BRepTools::UVBounds	(	const TopoDS_Face &	F,
		const TopoDS_Wire &	W,
		Standard_Real &	UMin,
		Standard_Real &	UMax,
		Standard_Real &	VMin,
		Standard_Real &	VMax
	)

static

Returns in UMin, UMax, VMin, VMax the bounding values of the wire in the parametric space of F.

◆ UVBounds() [3/3]

static void BRepTools::UVBounds	(	const TopoDS_Face &	F,
		Standard_Real &	UMin,
		Standard_Real &	UMax,
		Standard_Real &	VMin,
		Standard_Real &	VMax
	)

static

Returns in UMin, UMax, VMin, VMax the bounding values in the parametric space of F.

◆ Write() [1/4]

static Standard_Boolean BRepTools::Write	(	const TopoDS_Shape &	theShape,
		const Standard_CString	theFile,
		const Message_ProgressRange &	theProgress = `Message_ProgressRange()`
	)

inlinestatic

Writes the shape to the file in an ASCII format TopTools_FormatVersion_VERSION_1. This alias writes shape with triangulation data.

Parameters

theShape	[in] the shape to write
theFile	[in] the path to file to output shape into
theRange	the range of progress indicator to fill in

◆ Write() [2/4]

static Standard_Boolean BRepTools::Write	(	const TopoDS_Shape &	theShape,
		const Standard_CString	theFile,
		const Standard_Boolean	theWithTriangles,
		const Standard_Boolean	theWithNormals,
		const TopTools_FormatVersion	theVersion,
		const Message_ProgressRange &	theProgress = `Message_ProgressRange()`
	)

static

Writes the shape to the file in an ASCII format of specified version.

Parameters

theShape	[in] the shape to write
theFile	[in] the path to file to output shape into
theWithTriangles	[in] flag which specifies whether to save shape with (TRUE) or without (FALSE) triangles; has no effect on triangulation-only geometry
theWithNormals	[in] flag which specifies whether to save triangulation with (TRUE) or without (FALSE) normals; has no effect on triangulation-only geometry
theVersion	[in] the TopTools format version
theRange	the range of progress indicator to fill in

◆ Write() [3/4]

static void BRepTools::Write	(	const TopoDS_Shape &	theShape,
		Standard_OStream &	theStream,
		const Message_ProgressRange &	theProgress = `Message_ProgressRange()`
	)

inlinestatic

Writes the shape to the stream in an ASCII format TopTools_FormatVersion_VERSION_1. This alias writes shape with triangulation data.

Parameters

theShape	[in] the shape to write
theStream	[in][out] the stream to output shape into
theRange	the range of progress indicator to fill in

◆ Write() [4/4]

static void BRepTools::Write	(	const TopoDS_Shape &	theShape,
		Standard_OStream &	theStream,
		const Standard_Boolean	theWithTriangles,
		const Standard_Boolean	theWithNormals,
		const TopTools_FormatVersion	theVersion,
		const Message_ProgressRange &	theProgress = `Message_ProgressRange()`
	)

static

Writes the shape to the stream in an ASCII format of specified version.

Parameters

theShape	[in] the shape to write
theStream	[in][out] the stream to output shape into
theWithTriangles	[in] flag which specifies whether to save shape with (TRUE) or without (FALSE) triangles; has no effect on triangulation-only geometry
theWithNormals	[in] flag which specifies whether to save triangulation with (TRUE) or without (FALSE) normals; has no effect on triangulation-only geometry
theVersion	[in] the TopTools format version
theRange	the range of progress indicator to fill in

The documentation for this class was generated from the following file:

BRepTools.hxx

BRepTools Class Reference

Static Public Member Functions

Detailed Description

Member Function Documentation

◆ ActivateTriangulation()

◆ AddUVBounds() [1/3]

◆ AddUVBounds() [2/3]

◆ AddUVBounds() [3/3]

◆ CheckLocations()

◆ Clean()

◆ CleanGeometry()

◆ Compare() [1/2]

◆ Compare() [2/2]

◆ DetectClosedness()

◆ Dump()

◆ EvalAndUpdateTol()

◆ IsReallyClosed()

◆ LoadAllTriangulations()

◆ LoadTriangulation()

◆ Map3DEdges()

◆ OriEdgeInFace()

◆ OuterWire()

◆ Read() [1/2]

◆ Read() [2/2]

◆ RemoveInternals()

◆ RemoveUnusedPCurves()

◆ Triangulation()

◆ UnloadAllTriangulations()

◆ UnloadTriangulation()

◆ Update() [1/9]

◆ Update() [2/9]

◆ Update() [3/9]

◆ Update() [4/9]

◆ Update() [5/9]

◆ Update() [6/9]

◆ Update() [7/9]

◆ Update() [8/9]

◆ Update() [9/9]

◆ UpdateFaceUVPoints()

◆ UVBounds() [1/3]

◆ UVBounds() [2/3]

◆ UVBounds() [3/3]

◆ Write() [1/4]

◆ Write() [2/4]

◆ Write() [3/4]

◆ Write() [4/4]