this tool intended for approximation surfaces, curves and pcurves with specified degree , max number of segments, tolerance 2d, tolerance 3d. Specified continuity can be reduced if approximation with specified continuity was not done. More...

#include <ShapeCustom_BSplineRestriction.hxx>

Inheritance diagram for ShapeCustom_BSplineRestriction:

[legend]

Public Member Functions
	ShapeCustom_BSplineRestriction ()
	Empty constructor. More...

	ShapeCustom_BSplineRestriction (const Standard_Boolean anApproxSurfaceFlag, const Standard_Boolean anApproxCurve3dFlag, const Standard_Boolean anApproxCurve2dFlag, const Standard_Real aTol3d, const Standard_Real aTol2d, const GeomAbs_Shape aContinuity3d, const GeomAbs_Shape aContinuity2d, const Standard_Integer aMaxDegree, const Standard_Integer aNbMaxSeg, const Standard_Boolean Degree, const Standard_Boolean Rational)
	Initializes with specified parameters of approximation. More...

	ShapeCustom_BSplineRestriction (const Standard_Boolean anApproxSurfaceFlag, const Standard_Boolean anApproxCurve3dFlag, const Standard_Boolean anApproxCurve2dFlag, const Standard_Real aTol3d, const Standard_Real aTol2d, const GeomAbs_Shape aContinuity3d, const GeomAbs_Shape aContinuity2d, const Standard_Integer aMaxDegree, const Standard_Integer aNbMaxSeg, const Standard_Boolean Degree, const Standard_Boolean Rational, const Handle< ShapeCustom_RestrictionParameters > &aModes)
	Initializes with specified parameters of approximation. More...

Standard_Boolean	NewSurface (const TopoDS_Face &F, Handle< Geom_Surface > &S, TopLoc_Location &L, Standard_Real &Tol, Standard_Boolean &RevWires, Standard_Boolean &RevFace) override
	Returns Standard_True if the face <F> has been modified. In this case, is the new geometric support of the face, <L> the new location,<Tol> the new tolerance.<RevWires> has to be set to Standard_True when the modification reverses the normal of the surface.(the wires have to be reversed). <RevFace> has to be set to Standard_True if the orientation of the modified face changes in the shells which contain it. More...

Standard_Boolean	NewCurve (const TopoDS_Edge &E, Handle< Geom_Curve > &C, TopLoc_Location &L, Standard_Real &Tol) override
	Returns Standard_True if curve from the edge <E> has been modified. In this case, `is the new geometric support of the edge, <L> the new location, <Tol> the new tolerance. Otherwise, returns Standard_True if Surface is modified or one of pcurves of edge is modified. In this case C is copy of geometric support of the edge. In other cases returns Standard_False, and , <L>, <Tol> are not significant.` More...

Standard_Boolean	NewCurve2d (const TopoDS_Edge &E, const TopoDS_Face &F, const TopoDS_Edge &NewE, const TopoDS_Face &NewF, Handle< Geom2d_Curve > &C, Standard_Real &Tol) override
	Returns Standard_True if the edge <E> has been modified. In this case,if curve on the surface is modified, `is the new geometric support of the edge, <L> the new location, <Tol> the new tolerance. If curve on the surface is not modified C is copy curve on surface from the edge <E>.` More...

Standard_Boolean	ConvertSurface (const Handle< Geom_Surface > &aSurface, Handle< Geom_Surface > &S, const Standard_Real UF, const Standard_Real UL, const Standard_Real VF, const Standard_Real VL, const Standard_Boolean IsOf=Standard_True)
	Returns Standard_True if the surface has been modified. if flag IsOf equals Standard_True Offset surfaces are approximated to Offset if Standard_False to BSpline. More...

Standard_Boolean	ConvertCurve (const Handle< Geom_Curve > &aCurve, Handle< Geom_Curve > &C, const Standard_Boolean IsConvert, const Standard_Real First, const Standard_Real Last, Standard_Real &TolCur, const Standard_Boolean IsOf=Standard_True)
	Returns Standard_True if the curve has been modified. if flag IsOf equals Standard_True Offset curves are approximated to Offset if Standard_False to BSpline. More...

Standard_Boolean	ConvertCurve2d (const Handle< Geom2d_Curve > &aCurve, Handle< Geom2d_Curve > &C, const Standard_Boolean IsConvert, const Standard_Real First, const Standard_Real Last, Standard_Real &TolCur, const Standard_Boolean IsOf=Standard_True)
	Returns Standard_True if the pcurve has been modified. if flag IsOf equals Standard_True Offset pcurves are approximated to Offset if Standard_False to BSpline. More...

void	SetTol3d (const Standard_Real Tol3d)
	Sets tolerance of approximation for curve3d and surface. More...

void	SetTol2d (const Standard_Real Tol2d)
	Sets tolerance of approximation for curve2d. More...

Standard_Boolean &	ModifyApproxSurfaceFlag ()
	Returns (modifiable) the flag which defines whether the surface is approximated. More...

Standard_Boolean &	ModifyApproxCurve3dFlag ()
	Returns (modifiable) the flag which defines whether the curve3d is approximated. More...

Standard_Boolean &	ModifyApproxCurve2dFlag ()
	Returns (modifiable) the flag which defines whether the curve2d is approximated. More...

void	SetContinuity3d (const GeomAbs_Shape Continuity3d)
	Sets continuity3d for approximation curve3d and surface. More...

void	SetContinuity2d (const GeomAbs_Shape Continuity2d)
	Sets continuity3d for approximation curve2d. More...

void	SetMaxDegree (const Standard_Integer MaxDegree)
	Sets max degree for approximation. More...

void	SetMaxNbSegments (const Standard_Integer MaxNbSegments)
	Sets max number of segments for approximation. More...

void	SetPriority (const Standard_Boolean Degree)
	Sets priority for approximation curves and surface. If Degree is True approximation is made with degree less then specified MaxDegree at the expense of number of spanes. If Degree is False approximation is made with number of spans less then specified MaxNbSegment at the expense of specified MaxDegree. More...

void	SetConvRational (const Standard_Boolean Rational)
	Sets flag for define if rational BSpline or Bezier is converted to polynomial. If Rational is True approximation for rational BSpline and Bezier is made to polynomial even if degree is less then MaxDegree and number of spans is less then specified MaxNbSegment. More...

Handle< ShapeCustom_RestrictionParameters >	GetRestrictionParameters () const
	Returns the container of modes which defines what geometry should be converted to BSplines. More...

void	SetRestrictionParameters (const Handle< ShapeCustom_RestrictionParameters > &aModes)
	Sets the container of modes which defines what geometry should be converted to BSplines. More...

Standard_Real	Curve3dError () const
	Returns error for approximation curve3d. More...

Standard_Real	Curve2dError () const
	Returns error for approximation curve2d. More...

Standard_Real	SurfaceError () const
	Returns error for approximation surface. More...

Standard_Boolean	NewPoint (const TopoDS_Vertex &V, gp_Pnt &P, Standard_Real &Tol) override
	Returns true if the vertex V has been modified. If V has been modified: More...

Standard_Boolean	NewParameter (const TopoDS_Vertex &V, const TopoDS_Edge &E, Standard_Real &P, Standard_Real &Tol) override
	Returns true if the vertex V has a new parameter on the edge E. If a new parameter exists: More...

GeomAbs_Shape	Continuity (const TopoDS_Edge &E, const TopoDS_Face &F1, const TopoDS_Face &F2, const TopoDS_Edge &NewE, const TopoDS_Face &NewF1, const TopoDS_Face &NewF2) override
	Returns the continuity of <NewE> between <NewF1> and <NewF2>. <NewE> is the new edge created from <E>. <NewF1> (resp. <NewF2>) is the new face created from <F1> (resp. <F2>). More...

Standard_Real	MaxErrors (Standard_Real &aCurve3dErr, Standard_Real &aCurve2dErr) const
	Returns error for approximation surface, curve3d and curve2d. More...

Standard_Integer	NbOfSpan () const
	Returns number for approximation surface, curve3d and curve2d. More...

Public Member Functions inherited from ShapeCustom_Modification
virtual void	SetMsgRegistrator (const Handle< ShapeExtend_BasicMsgRegistrator > &msgreg)
	Sets message registrator. More...

Handle< ShapeExtend_BasicMsgRegistrator >	MsgRegistrator () const
	Returns message registrator. More...

void	SendMsg (const TopoDS_Shape &shape, const Message_Msg &message, const Message_Gravity gravity=Message_Info) const
	Sends a message to be attached to the shape. Calls corresponding message of message registrator. More...

Public Member Functions inherited from BRepTools_Modification
virtual Standard_Boolean	NewTriangulation (const TopoDS_Face &F, Handle< Poly_Triangulation > &T)
	Returns true if the face has been modified according to changed triangulation. If the face has been modified: More...

virtual Standard_Boolean	NewPolygon (const TopoDS_Edge &E, Handle< Poly_Polygon3D > &P)
	Returns true if the edge has been modified according to changed polygon. If the edge has been modified: More...

virtual Standard_Boolean	NewPolygonOnTriangulation (const TopoDS_Edge &E, const TopoDS_Face &F, Handle< Poly_PolygonOnTriangulation > &P)
	Returns true if the edge has been modified according to changed polygon on triangulation. If the edge has been modified: More...

Public Member Functions inherited from Standard_Transient
	Standard_Transient ()
	Empty constructor. More...

	Standard_Transient (const Standard_Transient &)
	Copy constructor – does nothing. More...

Standard_Transient &	operator= (const Standard_Transient &)
	Assignment operator, needed to avoid copying reference counter. More...

virtual	~Standard_Transient ()
	Destructor must be virtual. More...

virtual void	Delete () const
	Memory deallocator for transient classes. More...

virtual const opencascade::handle< Standard_Type > &	DynamicType () const
	Returns a type descriptor about this object. More...

Standard_Boolean	IsInstance (const opencascade::handle< Standard_Type > &theType) const
	Returns a true value if this is an instance of Type. More...

Standard_Boolean	IsInstance (const Standard_CString theTypeName) const
	Returns a true value if this is an instance of TypeName. More...

Standard_Boolean	IsKind (const opencascade::handle< Standard_Type > &theType) const
	Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...

Standard_Boolean	IsKind (const Standard_CString theTypeName) const
	Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...

Standard_Transient *	This () const
	Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero. More...

Standard_Integer	GetRefCount () const
	Get the reference counter of this object. More...

void	IncrementRefCounter () const
	Increments the reference counter of this object. More...

Standard_Integer	DecrementRefCounter () const
	Decrements the reference counter of this object; returns the decremented value. More...

Additional Inherited Members
Public Types inherited from Standard_Transient
typedef void	base_type
	Returns a type descriptor about this object. More...

Static Public Member Functions inherited from Standard_Transient
static const char *	get_type_name ()
	Returns a type descriptor about this object. More...

static const opencascade::handle< Standard_Type > &	get_type_descriptor ()
	Returns type descriptor of Standard_Transient class. More...

Detailed Description

this tool intended for approximation surfaces, curves and pcurves with specified degree , max number of segments, tolerance 2d, tolerance 3d. Specified continuity can be reduced if approximation with specified continuity was not done.

Constructor & Destructor Documentation

◆ ShapeCustom_BSplineRestriction() [1/3]

ShapeCustom_BSplineRestriction::ShapeCustom_BSplineRestriction ( )

Empty constructor.

◆ ShapeCustom_BSplineRestriction() [2/3]

ShapeCustom_BSplineRestriction::ShapeCustom_BSplineRestriction	(	const Standard_Boolean	anApproxSurfaceFlag,
		const Standard_Boolean	anApproxCurve3dFlag,
		const Standard_Boolean	anApproxCurve2dFlag,
		const Standard_Real	aTol3d,
		const Standard_Real	aTol2d,
		const GeomAbs_Shape	aContinuity3d,
		const GeomAbs_Shape	aContinuity2d,
		const Standard_Integer	aMaxDegree,
		const Standard_Integer	aNbMaxSeg,
		const Standard_Boolean	Degree,
		const Standard_Boolean	Rational
	)

Initializes with specified parameters of approximation.

◆ ShapeCustom_BSplineRestriction() [3/3]

ShapeCustom_BSplineRestriction::ShapeCustom_BSplineRestriction	(	const Standard_Boolean	anApproxSurfaceFlag,
		const Standard_Boolean	anApproxCurve3dFlag,
		const Standard_Boolean	anApproxCurve2dFlag,
		const Standard_Real	aTol3d,
		const Standard_Real	aTol2d,
		const GeomAbs_Shape	aContinuity3d,
		const GeomAbs_Shape	aContinuity2d,
		const Standard_Integer	aMaxDegree,
		const Standard_Integer	aNbMaxSeg,
		const Standard_Boolean	Degree,
		const Standard_Boolean	Rational,
		const Handle< ShapeCustom_RestrictionParameters > &	aModes
	)

Initializes with specified parameters of approximation.

Member Function Documentation

◆ Continuity()

GeomAbs_Shape ShapeCustom_BSplineRestriction::Continuity	(	const TopoDS_Edge &	E,
		const TopoDS_Face &	F1,
		const TopoDS_Face &	F2,
		const TopoDS_Edge &	NewE,
		const TopoDS_Face &	NewF1,
		const TopoDS_Face &	NewF2
	)

overridevirtual

Returns the continuity of <NewE> between <NewF1> and <NewF2>. <NewE> is the new edge created from <E>. <NewF1> (resp. <NewF2>) is the new face created from <F1> (resp. <F2>).

Implements BRepTools_Modification.

◆ ConvertCurve()

Standard_Boolean ShapeCustom_BSplineRestriction::ConvertCurve	(	const Handle< Geom_Curve > &	aCurve,
		Handle< Geom_Curve > &	C,
		const Standard_Boolean	IsConvert,
		const Standard_Real	First,
		const Standard_Real	Last,
		Standard_Real &	TolCur,
		const Standard_Boolean	IsOf = `Standard_True`
	)

Returns Standard_True if the curve has been modified. if flag IsOf equals Standard_True Offset curves are approximated to Offset if Standard_False to BSpline.

◆ ConvertCurve2d()

Standard_Boolean ShapeCustom_BSplineRestriction::ConvertCurve2d	(	const Handle< Geom2d_Curve > &	aCurve,
		Handle< Geom2d_Curve > &	C,
		const Standard_Boolean	IsConvert,
		const Standard_Real	First,
		const Standard_Real	Last,
		Standard_Real &	TolCur,
		const Standard_Boolean	IsOf = `Standard_True`
	)

Returns Standard_True if the pcurve has been modified. if flag IsOf equals Standard_True Offset pcurves are approximated to Offset if Standard_False to BSpline.

◆ ConvertSurface()

Standard_Boolean ShapeCustom_BSplineRestriction::ConvertSurface	(	const Handle< Geom_Surface > &	aSurface,
		Handle< Geom_Surface > &	S,
		const Standard_Real	UF,
		const Standard_Real	UL,
		const Standard_Real	VF,
		const Standard_Real	VL,
		const Standard_Boolean	IsOf = `Standard_True`
	)

Returns Standard_True if the surface has been modified. if flag IsOf equals Standard_True Offset surfaces are approximated to Offset if Standard_False to BSpline.

◆ Curve2dError()

Standard_Real ShapeCustom_BSplineRestriction::Curve2dError ( ) const

Returns error for approximation curve2d.

◆ Curve3dError()

Standard_Real ShapeCustom_BSplineRestriction::Curve3dError ( ) const

Returns error for approximation curve3d.

◆ GetRestrictionParameters()

Handle< ShapeCustom_RestrictionParameters > ShapeCustom_BSplineRestriction::GetRestrictionParameters ( ) const

Returns the container of modes which defines what geometry should be converted to BSplines.

◆ MaxErrors()

Standard_Real ShapeCustom_BSplineRestriction::MaxErrors	(	Standard_Real &	aCurve3dErr,
		Standard_Real &	aCurve2dErr
	)		const

Returns error for approximation surface, curve3d and curve2d.

◆ ModifyApproxCurve2dFlag()

Standard_Boolean& ShapeCustom_BSplineRestriction::ModifyApproxCurve2dFlag ( )

Returns (modifiable) the flag which defines whether the curve2d is approximated.

◆ ModifyApproxCurve3dFlag()

Standard_Boolean& ShapeCustom_BSplineRestriction::ModifyApproxCurve3dFlag ( )

Returns (modifiable) the flag which defines whether the curve3d is approximated.

◆ ModifyApproxSurfaceFlag()

Standard_Boolean& ShapeCustom_BSplineRestriction::ModifyApproxSurfaceFlag ( )

Returns (modifiable) the flag which defines whether the surface is approximated.

◆ NbOfSpan()

Standard_Integer ShapeCustom_BSplineRestriction::NbOfSpan ( ) const

Returns number for approximation surface, curve3d and curve2d.

◆ NewCurve()

Standard_Boolean ShapeCustom_BSplineRestriction::NewCurve	(	const TopoDS_Edge &	E,
		Handle< Geom_Curve > &	C,
		TopLoc_Location &	L,
		Standard_Real &	Tol
	)

overridevirtual

Returns Standard_True if curve from the edge <E> has been modified. In this case, is the new geometric support of the edge, <L> the new location, <Tol> the new tolerance. Otherwise, returns Standard_True if Surface is modified or one of pcurves of edge is modified. In this case C is copy of geometric support of the edge. In other cases returns Standard_False, and , <L>, <Tol> are not significant.

Implements BRepTools_Modification.

◆ NewCurve2d()

Standard_Boolean ShapeCustom_BSplineRestriction::NewCurve2d	(	const TopoDS_Edge &	E,
		const TopoDS_Face &	F,
		const TopoDS_Edge &	NewE,
		const TopoDS_Face &	NewF,
		Handle< Geom2d_Curve > &	C,
		Standard_Real &	Tol
	)

overridevirtual

Returns Standard_True if the edge <E> has been modified. In this case,if curve on the surface is modified, is the new geometric support of the edge, <L> the new location, <Tol> the new tolerance. If curve on the surface is not modified C is copy curve on surface from the edge <E>.

Otherwise, returns Standard_False, and , <L>, <Tol> are not significant.

<NewE> is the new edge created from <E>. <NewF> is the new face created from <F>. They may be useful.

Implements BRepTools_Modification.

◆ NewParameter()

Standard_Boolean ShapeCustom_BSplineRestriction::NewParameter	(	const TopoDS_Vertex &	V,
		const TopoDS_Edge &	E,
		Standard_Real &	P,
		Standard_Real &	Tol
	)

overridevirtual

Returns true if the vertex V has a new parameter on the edge E. If a new parameter exists:

P is the parameter, and
Tol is the new tolerance. If there is no new parameter this function returns false, and the values of P and Tol are not significant.

Implements BRepTools_Modification.

◆ NewPoint()

Standard_Boolean ShapeCustom_BSplineRestriction::NewPoint	(	const TopoDS_Vertex &	V,
		gp_Pnt &	P,
		Standard_Real &	Tol
	)

overridevirtual

Returns true if the vertex V has been modified. If V has been modified:

P is the new geometry of the vertex, and
Tol is the new tolerance. If the vertex has not been modified this function returns false, and the values of P and Tol are not significant.

Implements BRepTools_Modification.

◆ NewSurface()

Standard_Boolean ShapeCustom_BSplineRestriction::NewSurface	(	const TopoDS_Face &	F,
		Handle< Geom_Surface > &	S,
		TopLoc_Location &	L,
		Standard_Real &	Tol,
		Standard_Boolean &	RevWires,
		Standard_Boolean &	RevFace
	)

overridevirtual

Returns Standard_True if the face <F> has been modified. In this case, is the new geometric support of the face, <L> the new location,<Tol> the new tolerance.<RevWires> has to be set to Standard_True when the modification reverses the normal of the surface.(the wires have to be reversed). <RevFace> has to be set to Standard_True if the orientation of the modified face changes in the shells which contain it.

Otherwise, returns Standard_False, and ~~, <L>, <Tol> , <RevWires> ,<RevFace> are not significant.~~

Implements BRepTools_Modification.

◆ SetContinuity2d()

void ShapeCustom_BSplineRestriction::SetContinuity2d ( const GeomAbs_Shape Continuity2d )

Sets continuity3d for approximation curve2d.

◆ SetContinuity3d()

void ShapeCustom_BSplineRestriction::SetContinuity3d ( const GeomAbs_Shape Continuity3d )

Sets continuity3d for approximation curve3d and surface.

◆ SetConvRational()

void ShapeCustom_BSplineRestriction::SetConvRational ( const Standard_Boolean Rational )

Sets flag for define if rational BSpline or Bezier is converted to polynomial. If Rational is True approximation for rational BSpline and Bezier is made to polynomial even if degree is less then MaxDegree and number of spans is less then specified MaxNbSegment.

◆ SetMaxDegree()

void ShapeCustom_BSplineRestriction::SetMaxDegree ( const Standard_Integer MaxDegree )

Sets max degree for approximation.

◆ SetMaxNbSegments()

void ShapeCustom_BSplineRestriction::SetMaxNbSegments ( const Standard_Integer MaxNbSegments )

Sets max number of segments for approximation.

◆ SetPriority()

void ShapeCustom_BSplineRestriction::SetPriority ( const Standard_Boolean Degree )

Sets priority for approximation curves and surface. If Degree is True approximation is made with degree less then specified MaxDegree at the expense of number of spanes. If Degree is False approximation is made with number of spans less then specified MaxNbSegment at the expense of specified MaxDegree.

◆ SetRestrictionParameters()

void ShapeCustom_BSplineRestriction::SetRestrictionParameters ( const Handle< ShapeCustom_RestrictionParameters > & aModes )

Sets the container of modes which defines what geometry should be converted to BSplines.

◆ SetTol2d()

void ShapeCustom_BSplineRestriction::SetTol2d ( const Standard_Real Tol2d )

Sets tolerance of approximation for curve2d.

◆ SetTol3d()

void ShapeCustom_BSplineRestriction::SetTol3d ( const Standard_Real Tol3d )

Sets tolerance of approximation for curve3d and surface.

◆ SurfaceError()

Standard_Real ShapeCustom_BSplineRestriction::SurfaceError ( ) const

Returns error for approximation surface.

The documentation for this class was generated from the following file:

ShapeCustom_BSplineRestriction.hxx

ShapeCustom_BSplineRestriction Class Reference

Public Member Functions

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ ShapeCustom_BSplineRestriction() [1/3]

◆ ShapeCustom_BSplineRestriction() [2/3]

◆ ShapeCustom_BSplineRestriction() [3/3]

Member Function Documentation

◆ Continuity()

◆ ConvertCurve()

◆ ConvertCurve2d()

◆ ConvertSurface()

◆ Curve2dError()

◆ Curve3dError()

◆ GetRestrictionParameters()

◆ MaxErrors()

◆ ModifyApproxCurve2dFlag()

◆ ModifyApproxCurve3dFlag()

◆ ModifyApproxSurfaceFlag()

◆ NbOfSpan()

◆ NewCurve()

◆ NewCurve2d()

◆ NewParameter()

◆ NewPoint()

◆ NewSurface()

◆ SetContinuity2d()

◆ SetContinuity3d()

◆ SetConvRational()

◆ SetMaxDegree()

◆ SetMaxNbSegments()

◆ SetPriority()

◆ SetRestrictionParameters()

◆ SetTol2d()

◆ SetTol3d()

◆ SurfaceError()