#include <TopOpeBRepDS_HDataStructure.hxx>

Inheritance diagram for TopOpeBRepDS_HDataStructure:

Public Member Functions
	TopOpeBRepDS_HDataStructure ()

void	AddAncestors (const TopoDS_Shape &S)

void	AddAncestors (const TopoDS_Shape &S, const TopAbs_ShapeEnum T1, const TopAbs_ShapeEnum T2)
	Update the data structure with shapes of type T1 containing a subshape of type T2 which is stored in the DS. Used by the previous one. More...

void	ChkIntg ()
	Check the integrity of the DS. More...

const TopOpeBRepDS_DataStructure &	DS () const

TopOpeBRepDS_DataStructure &	ChangeDS ()

Standard_Integer	NbSurfaces () const

Standard_Integer	NbCurves () const

Standard_Integer	NbPoints () const

const TopOpeBRepDS_Surface &	Surface (const Standard_Integer I) const
	Returns the surface of index . More...

TopOpeBRepDS_CurveIterator	SurfaceCurves (const Standard_Integer I) const
	Returns an iterator on the curves on the surface . More...

const TopOpeBRepDS_Curve &	Curve (const Standard_Integer I) const
	Returns the Curve of index . More...

TopOpeBRepDS_Curve &	ChangeCurve (const Standard_Integer I)
	Returns the Curve of index . More...

TopOpeBRepDS_PointIterator	CurvePoints (const Standard_Integer I) const
	Returns an iterator on the points on the curve . More...

const TopOpeBRepDS_Point &	Point (const Standard_Integer I) const
	Returns the point of index . More...

Standard_Integer	NbShapes () const

const TopoDS_Shape &	Shape (const Standard_Integer I, const Standard_Boolean FindKeep=Standard_True) const
	Returns the shape of index in the DS. More...

Standard_Integer	Shape (const TopoDS_Shape &S, const Standard_Boolean FindKeep=Standard_True) const
	Returns the index of shape ~~in the DS returns 0 if ~~is not in the DS.~~~~ More...

Standard_Boolean	HasGeometry (const TopoDS_Shape &S) const
	Returns True if ~~has new geometries.~~ More...

Standard_Boolean	HasShape (const TopoDS_Shape &S, const Standard_Boolean FindKeep=Standard_True) const
	Returns True if ~~has new geometries (SOLID,FACE,EDGE) or if ~~(SHELL,WIRE) has sub-shape (FACE,EDGE) with new geometries.~~~~ More...

Standard_Boolean	HasSameDomain (const TopoDS_Shape &S, const Standard_Boolean FindKeep=Standard_True) const
	Returns True if ~~share a geometrical domain with some other shapes.~~ More...

TopTools_ListIteratorOfListOfShape	SameDomain (const TopoDS_Shape &S) const
	Returns an iterator on the SameDomain shapes attached to the shape . More...

TopOpeBRepDS_Config	SameDomainOrientation (const TopoDS_Shape &S) const
	Returns orientation of shape ~~compared with its reference shape.~~ More...

Standard_Integer	SameDomainReference (const TopoDS_Shape &S) const
	Returns orientation of shape ~~compared with its reference shape.~~ More...

TopOpeBRepDS_SurfaceIterator	SolidSurfaces (const TopoDS_Shape &S) const
	Returns an iterator on the surfaces attached to the solid . More...

TopOpeBRepDS_SurfaceIterator	SolidSurfaces (const Standard_Integer I) const
	Returns an iterator on the surfaces attached to the solid . More...

TopOpeBRepDS_CurveIterator	FaceCurves (const TopoDS_Shape &F) const
	Returns an iterator on the curves attached to the face <F>. More...

TopOpeBRepDS_CurveIterator	FaceCurves (const Standard_Integer I) const
	Returns an iterator on the curves attached to the face . More...

TopOpeBRepDS_PointIterator	EdgePoints (const TopoDS_Shape &E) const
	Returns an iterator on the points attached to the edge <E>. More...

Standard_Integer	MakeCurve (const TopOpeBRepDS_Curve &C1, TopOpeBRepDS_Curve &C2)

void	RemoveCurve (const Standard_Integer iC)

Standard_Integer	NbGeometry (const TopOpeBRepDS_Kind K) const

Standard_Integer	NbTopology (const TopOpeBRepDS_Kind K) const

Standard_Integer	NbTopology () const

Standard_Boolean	EdgesSameParameter () const
	returns True if all the edges stored as shapes in the DS are SameParameter, otherwise False. More...

void	SortOnParameter (const TopOpeBRepDS_ListOfInterference &L1, TopOpeBRepDS_ListOfInterference &L2) const

void	SortOnParameter (TopOpeBRepDS_ListOfInterference &L) const

void	MinMaxOnParameter (const TopOpeBRepDS_ListOfInterference &L, Standard_Real &Min, Standard_Real &Max) const

Standard_Boolean	ScanInterfList (TopOpeBRepDS_ListIteratorOfListOfInterference &IT, const TopOpeBRepDS_Point &PDS) const
	Search, among a list of interferences accessed by the iterator <IT>, a geometry <G> whose 3D point is identical to the 3D point of the TheDSPoint <PDS>. returns True if such an interference has been found, False else. if True, iterator It points (by the Value() method) on the first interference accessing an identical 3D point. More...

Standard_Boolean	GetGeometry (TopOpeBRepDS_ListIteratorOfListOfInterference &IT, const TopOpeBRepDS_Point &PDS, Standard_Integer &G, TopOpeBRepDS_Kind &K) const
	Get the geometry of a DS point <PDS>. Search for it with ScanInterfList (previous method). if found, set <G,K> to the geometry,kind of the interference found. returns the value of ScanInterfList(). More...

void	StoreInterference (const Handle< TopOpeBRepDS_Interference > &I, TopOpeBRepDS_ListOfInterference &LI, const TCollection_AsciiString &str="")
	Add interference to list . More...

void	StoreInterference (const Handle< TopOpeBRepDS_Interference > &I, const TopoDS_Shape &S, const TCollection_AsciiString &str="")
	Add interference to list of interference of shape . More...

void	StoreInterference (const Handle< TopOpeBRepDS_Interference > &I, const Standard_Integer IS, const TCollection_AsciiString &str="")
	Add interference to list of interference of shape <IS>. More...

void	StoreInterferences (const TopOpeBRepDS_ListOfInterference &LI, const TopoDS_Shape &S, const TCollection_AsciiString &str="")

void	StoreInterferences (const TopOpeBRepDS_ListOfInterference &LI, const Standard_Integer IS, const TCollection_AsciiString &str="")

void	ClearStoreInterferences (const TopOpeBRepDS_ListOfInterference &LI, const TopoDS_Shape &S, const TCollection_AsciiString &str="")

void	ClearStoreInterferences (const TopOpeBRepDS_ListOfInterference &LI, const Standard_Integer IS, const TCollection_AsciiString &str="")

Public Member Functions inherited from Standard_Transient
	Standard_Transient ()
	Empty constructor. More...

	Standard_Transient (const Standard_Transient &)
	Copy constructor – does nothing. More...

Standard_Transient &	operator= (const Standard_Transient &)
	Assignment operator, needed to avoid copying reference counter. More...

virtual	~Standard_Transient ()
	Destructor must be virtual. More...

virtual void	Delete () const
	Memory deallocator for transient classes. More...

virtual const opencascade::handle< Standard_Type > &	DynamicType () const
	Returns a type descriptor about this object. More...

Standard_Boolean	IsInstance (const opencascade::handle< Standard_Type > &theType) const
	Returns a true value if this is an instance of Type. More...

Standard_Boolean	IsInstance (const Standard_CString theTypeName) const
	Returns a true value if this is an instance of TypeName. More...

Standard_Boolean	IsKind (const opencascade::handle< Standard_Type > &theType) const
	Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...

Standard_Boolean	IsKind (const Standard_CString theTypeName) const
	Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...

Standard_Transient *	This () const
	Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero. More...

Standard_Integer	GetRefCount () const
	Get the reference counter of this object. More...

void	IncrementRefCounter () const
	Increments the reference counter of this object. More...

Standard_Integer	DecrementRefCounter () const
	Decrements the reference counter of this object; returns the decremented value. More...

Additional Inherited Members
Public Types inherited from Standard_Transient
typedef void	base_type
	Returns a type descriptor about this object. More...

Static Public Member Functions inherited from Standard_Transient
static const char *	get_type_name ()
	Returns a type descriptor about this object. More...

static const opencascade::handle< Standard_Type > &	get_type_descriptor ()
	Returns type descriptor of Standard_Transient class. More...

Constructor & Destructor Documentation

◆ TopOpeBRepDS_HDataStructure()

TopOpeBRepDS_HDataStructure::TopOpeBRepDS_HDataStructure ( )

Member Function Documentation

◆ AddAncestors() [1/2]

void TopOpeBRepDS_HDataStructure::AddAncestors ( const TopoDS_Shape & S )

◆ AddAncestors() [2/2]

void TopOpeBRepDS_HDataStructure::AddAncestors	(	const TopoDS_Shape &	S,
		const TopAbs_ShapeEnum	T1,
		const TopAbs_ShapeEnum	T2
	)

Update the data structure with shapes of type T1 containing a subshape of type T2 which is stored in the DS. Used by the previous one.

◆ ChangeCurve()

TopOpeBRepDS_Curve& TopOpeBRepDS_HDataStructure::ChangeCurve ( const Standard_Integer I )

Returns the Curve of index .

◆ ChangeDS()

TopOpeBRepDS_DataStructure& TopOpeBRepDS_HDataStructure::ChangeDS ( )

◆ ChkIntg()

void TopOpeBRepDS_HDataStructure::ChkIntg ( )

Check the integrity of the DS.

◆ ClearStoreInterferences() [1/2]

void TopOpeBRepDS_HDataStructure::ClearStoreInterferences	(	const TopOpeBRepDS_ListOfInterference &	LI,
		const Standard_Integer	IS,
		const TCollection_AsciiString &	str = `""`
	)

◆ ClearStoreInterferences() [2/2]

void TopOpeBRepDS_HDataStructure::ClearStoreInterferences	(	const TopOpeBRepDS_ListOfInterference &	LI,
		const TopoDS_Shape &	S,
		const TCollection_AsciiString &	str = `""`
	)

◆ Curve()

const TopOpeBRepDS_Curve& TopOpeBRepDS_HDataStructure::Curve ( const Standard_Integer I ) const

Returns the Curve of index .

◆ CurvePoints()

TopOpeBRepDS_PointIterator TopOpeBRepDS_HDataStructure::CurvePoints ( const Standard_Integer I ) const

Returns an iterator on the points on the curve .

◆ DS()

const TopOpeBRepDS_DataStructure& TopOpeBRepDS_HDataStructure::DS ( ) const

◆ EdgePoints()

TopOpeBRepDS_PointIterator TopOpeBRepDS_HDataStructure::EdgePoints ( const TopoDS_Shape & E ) const

Returns an iterator on the points attached to the edge <E>.

◆ EdgesSameParameter()

Standard_Boolean TopOpeBRepDS_HDataStructure::EdgesSameParameter ( ) const

returns True if all the edges stored as shapes in the DS are SameParameter, otherwise False.

◆ FaceCurves() [1/2]

TopOpeBRepDS_CurveIterator TopOpeBRepDS_HDataStructure::FaceCurves ( const Standard_Integer I ) const

Returns an iterator on the curves attached to the face .

◆ FaceCurves() [2/2]

TopOpeBRepDS_CurveIterator TopOpeBRepDS_HDataStructure::FaceCurves ( const TopoDS_Shape & F ) const

Returns an iterator on the curves attached to the face <F>.

◆ GetGeometry()

Standard_Boolean TopOpeBRepDS_HDataStructure::GetGeometry	(	TopOpeBRepDS_ListIteratorOfListOfInterference &	IT,
		const TopOpeBRepDS_Point &	PDS,
		Standard_Integer &	G,
		TopOpeBRepDS_Kind &	K
	)		const

Get the geometry of a DS point <PDS>. Search for it with ScanInterfList (previous method). if found, set <G,K> to the geometry,kind of the interference found. returns the value of ScanInterfList().

◆ HasGeometry()

Standard_Boolean TopOpeBRepDS_HDataStructure::HasGeometry ( const TopoDS_Shape & S ) const

Returns True if ~~has new geometries.~~

◆ HasSameDomain()

Standard_Boolean TopOpeBRepDS_HDataStructure::HasSameDomain	(	const TopoDS_Shape &	S,
		const Standard_Boolean	FindKeep = `Standard_True`
	)		const

Returns True if ~~share a geometrical domain with some other shapes.~~

◆ HasShape()

Standard_Boolean TopOpeBRepDS_HDataStructure::HasShape	(	const TopoDS_Shape &	S,
		const Standard_Boolean	FindKeep = `Standard_True`
	)		const

Returns True if ~~has new geometries (SOLID,FACE,EDGE) or if ~~(SHELL,WIRE) has sub-shape (FACE,EDGE) with new geometries.~~~~

◆ MakeCurve()

Standard_Integer TopOpeBRepDS_HDataStructure::MakeCurve	(	const TopOpeBRepDS_Curve &	C1,
		TopOpeBRepDS_Curve &	C2
	)

◆ MinMaxOnParameter()

void TopOpeBRepDS_HDataStructure::MinMaxOnParameter	(	const TopOpeBRepDS_ListOfInterference &	L,
		Standard_Real &	Min,
		Standard_Real &	Max
	)		const

◆ NbCurves()

Standard_Integer TopOpeBRepDS_HDataStructure::NbCurves ( ) const

◆ NbGeometry()

Standard_Integer TopOpeBRepDS_HDataStructure::NbGeometry ( const TopOpeBRepDS_Kind K ) const

◆ NbPoints()

Standard_Integer TopOpeBRepDS_HDataStructure::NbPoints ( ) const

◆ NbShapes()

Standard_Integer TopOpeBRepDS_HDataStructure::NbShapes ( ) const

◆ NbSurfaces()

Standard_Integer TopOpeBRepDS_HDataStructure::NbSurfaces ( ) const

◆ NbTopology() [1/2]

Standard_Integer TopOpeBRepDS_HDataStructure::NbTopology ( ) const

◆ NbTopology() [2/2]

Standard_Integer TopOpeBRepDS_HDataStructure::NbTopology ( const TopOpeBRepDS_Kind K ) const

◆ Point()

const TopOpeBRepDS_Point& TopOpeBRepDS_HDataStructure::Point ( const Standard_Integer I ) const

Returns the point of index .

◆ RemoveCurve()

void TopOpeBRepDS_HDataStructure::RemoveCurve ( const Standard_Integer iC )

◆ SameDomain()

TopTools_ListIteratorOfListOfShape TopOpeBRepDS_HDataStructure::SameDomain ( const TopoDS_Shape & S ) const

Returns an iterator on the SameDomain shapes attached to the shape .

◆ SameDomainOrientation()

TopOpeBRepDS_Config TopOpeBRepDS_HDataStructure::SameDomainOrientation ( const TopoDS_Shape & S ) const

Returns orientation of shape ~~compared with its reference shape.~~

◆ SameDomainReference()

Standard_Integer TopOpeBRepDS_HDataStructure::SameDomainReference ( const TopoDS_Shape & S ) const

Returns orientation of shape ~~compared with its reference shape.~~

◆ ScanInterfList()

Standard_Boolean TopOpeBRepDS_HDataStructure::ScanInterfList	(	TopOpeBRepDS_ListIteratorOfListOfInterference &	IT,
		const TopOpeBRepDS_Point &	PDS
	)		const

Search, among a list of interferences accessed by the iterator <IT>, a geometry <G> whose 3D point is identical to the 3D point of the TheDSPoint <PDS>. returns True if such an interference has been found, False else. if True, iterator It points (by the Value() method) on the first interference accessing an identical 3D point.

◆ Shape() [1/2]

const TopoDS_Shape& TopOpeBRepDS_HDataStructure::Shape	(	const Standard_Integer	I,
		const Standard_Boolean	FindKeep = `Standard_True`
	)		const

Returns the shape of index in the DS.

◆ Shape() [2/2]

Standard_Integer TopOpeBRepDS_HDataStructure::Shape	(	const TopoDS_Shape &	S,
		const Standard_Boolean	FindKeep = `Standard_True`
	)		const

Returns the index of shape ~~in the DS returns 0 if ~~is not in the DS.~~~~

◆ SolidSurfaces() [1/2]

TopOpeBRepDS_SurfaceIterator TopOpeBRepDS_HDataStructure::SolidSurfaces ( const Standard_Integer I ) const

Returns an iterator on the surfaces attached to the solid .

◆ SolidSurfaces() [2/2]

TopOpeBRepDS_SurfaceIterator TopOpeBRepDS_HDataStructure::SolidSurfaces ( const TopoDS_Shape & S ) const

Returns an iterator on the surfaces attached to the solid .

◆ SortOnParameter() [1/2]

void TopOpeBRepDS_HDataStructure::SortOnParameter	(	const TopOpeBRepDS_ListOfInterference &	L1,
		TopOpeBRepDS_ListOfInterference &	L2
	)		const

◆ SortOnParameter() [2/2]

void TopOpeBRepDS_HDataStructure::SortOnParameter ( TopOpeBRepDS_ListOfInterference & L ) const

◆ StoreInterference() [1/3]

void TopOpeBRepDS_HDataStructure::StoreInterference	(	const Handle< TopOpeBRepDS_Interference > &	I,
		const Standard_Integer	IS,
		const TCollection_AsciiString &	str = `""`
	)

Add interference to list of interference of shape <IS>.

◆ StoreInterference() [2/3]

void TopOpeBRepDS_HDataStructure::StoreInterference	(	const Handle< TopOpeBRepDS_Interference > &	I,
		const TopoDS_Shape &	S,
		const TCollection_AsciiString &	str = `""`
	)

Add interference to list of interference of shape .

◆ StoreInterference() [3/3]

void TopOpeBRepDS_HDataStructure::StoreInterference	(	const Handle< TopOpeBRepDS_Interference > &	I,
		TopOpeBRepDS_ListOfInterference &	LI,
		const TCollection_AsciiString &	str = `""`
	)

Add interference to list .

◆ StoreInterferences() [1/2]

void TopOpeBRepDS_HDataStructure::StoreInterferences	(	const TopOpeBRepDS_ListOfInterference &	LI,
		const Standard_Integer	IS,
		const TCollection_AsciiString &	str = `""`
	)

◆ StoreInterferences() [2/2]

void TopOpeBRepDS_HDataStructure::StoreInterferences	(	const TopOpeBRepDS_ListOfInterference &	LI,
		const TopoDS_Shape &	S,
		const TCollection_AsciiString &	str = `""`
	)

◆ Surface()

const TopOpeBRepDS_Surface& TopOpeBRepDS_HDataStructure::Surface ( const Standard_Integer I ) const

Returns the surface of index .

◆ SurfaceCurves()

TopOpeBRepDS_CurveIterator TopOpeBRepDS_HDataStructure::SurfaceCurves ( const Standard_Integer I ) const

Returns an iterator on the curves on the surface .

The documentation for this class was generated from the following file:

TopOpeBRepDS_HDataStructure.hxx

TopOpeBRepDS_HDataStructure Class Reference

Public Member Functions

Additional Inherited Members

Constructor & Destructor Documentation

◆ TopOpeBRepDS_HDataStructure()

Member Function Documentation

◆ AddAncestors() [1/2]

◆ AddAncestors() [2/2]

◆ ChangeCurve()

◆ ChangeDS()

◆ ChkIntg()

◆ ClearStoreInterferences() [1/2]

◆ ClearStoreInterferences() [2/2]

◆ Curve()

◆ CurvePoints()

◆ DS()

◆ EdgePoints()

◆ EdgesSameParameter()

◆ FaceCurves() [1/2]

◆ FaceCurves() [2/2]

◆ GetGeometry()

◆ HasGeometry()

◆ HasSameDomain()

◆ HasShape()

◆ MakeCurve()

◆ MinMaxOnParameter()

◆ NbCurves()

◆ NbGeometry()

◆ NbPoints()

◆ NbShapes()

◆ NbSurfaces()

◆ NbTopology() [1/2]

◆ NbTopology() [2/2]

◆ Point()

◆ RemoveCurve()

◆ SameDomain()

◆ SameDomainOrientation()

◆ SameDomainReference()

◆ ScanInterfList()

◆ Shape() [1/2]

◆ Shape() [2/2]

◆ SolidSurfaces() [1/2]

◆ SolidSurfaces() [2/2]

◆ SortOnParameter() [1/2]

◆ SortOnParameter() [2/2]

◆ StoreInterference() [1/3]

◆ StoreInterference() [2/3]

◆ StoreInterference() [3/3]

◆ StoreInterferences() [1/2]

◆ StoreInterferences() [2/2]

◆ Surface()

◆ SurfaceCurves()