#include <TopOpeBRepTool_ShapeTool.hxx>

Static Public Member Functions
static Standard_Real	Tolerance (const TopoDS_Shape &S)
	Returns the tolerance of the shape ~~. If the shape ~~is Null, returns 0.~~~~ More...

static gp_Pnt	Pnt (const TopoDS_Shape &S)
	Returns 3D point of vertex . More...

static Handle< Geom_Curve >	BASISCURVE (const Handle< Geom_Curve > &C)

static Handle< Geom_Curve >	BASISCURVE (const TopoDS_Edge &E)

static Handle< Geom_Surface >	BASISSURFACE (const Handle< Geom_Surface > &S)

static Handle< Geom_Surface >	BASISSURFACE (const TopoDS_Face &F)

static void	UVBOUNDS (const Handle< Geom_Surface > &S, Standard_Boolean &UPeri, Standard_Boolean &VPeri, Standard_Real &Umin, Standard_Real &Umax, Standard_Real &Vmin, Standard_Real &Vmax)

static void	UVBOUNDS (const TopoDS_Face &F, Standard_Boolean &UPeri, Standard_Boolean &VPeri, Standard_Real &Umin, Standard_Real &Umax, Standard_Real &Vmin, Standard_Real &Vmax)

static void	AdjustOnPeriodic (const TopoDS_Shape &S, Standard_Real &u, Standard_Real &v)
	adjust u,v values in UVBounds of the domain of the geometric shape ~~, according to Uperiodicity and VPeriodicity of the domain. ~~is assumed to be a face. u and/or v is/are not modified when the domain is not periodic in U and/or V .~~~~ More...

static Standard_Boolean	Closed (const TopoDS_Shape &S1, const TopoDS_Shape &S2)
	indicates whether shape S1 is a closing shape on S2 or not. More...

static Standard_Real	PeriodizeParameter (const Standard_Real par, const TopoDS_Shape &EE, const TopoDS_Shape &FF)

static Standard_Boolean	ShapesSameOriented (const TopoDS_Shape &S1, const TopoDS_Shape &S2)

static Standard_Boolean	SurfacesSameOriented (const BRepAdaptor_Surface &S1, const BRepAdaptor_Surface &S2)

static Standard_Boolean	FacesSameOriented (const TopoDS_Shape &F1, const TopoDS_Shape &F2)

static Standard_Boolean	CurvesSameOriented (const BRepAdaptor_Curve &C1, const BRepAdaptor_Curve &C2)

static Standard_Boolean	EdgesSameOriented (const TopoDS_Shape &E1, const TopoDS_Shape &E2)

static Standard_Real	EdgeData (const BRepAdaptor_Curve &BRAC, const Standard_Real P, gp_Dir &T, gp_Dir &N, Standard_Real &C)
	Compute tangent T, normal N, curvature C at point of parameter P on curve BRAC. Returns the tolerance indicating if T,N are null. More...

static Standard_Real	EdgeData (const TopoDS_Shape &E, const Standard_Real P, gp_Dir &T, gp_Dir &N, Standard_Real &C)
	Same as previous on edge E. More...

static Standard_Real	Resolution3dU (const Handle< Geom_Surface > &SU, const Standard_Real Tol2d)

static Standard_Real	Resolution3dV (const Handle< Geom_Surface > &SU, const Standard_Real Tol2d)

static Standard_Real	Resolution3d (const Handle< Geom_Surface > &SU, const Standard_Real Tol2d)

static Standard_Real	Resolution3d (const TopoDS_Face &F, const Standard_Real Tol2d)

Member Function Documentation

◆ AdjustOnPeriodic()

static void TopOpeBRepTool_ShapeTool::AdjustOnPeriodic	(	const TopoDS_Shape &	S,
		Standard_Real &	u,
		Standard_Real &	v
	)

static

adjust u,v values in UVBounds of the domain of the geometric shape ~~, according to Uperiodicity and VPeriodicity of the domain. ~~is assumed to be a face. u and/or v is/are not modified when the domain is not periodic in U and/or V .~~~~

◆ BASISCURVE() [1/2]

static Handle< Geom_Curve > TopOpeBRepTool_ShapeTool::BASISCURVE ( const Handle< Geom_Curve > & C )

static

◆ BASISCURVE() [2/2]

static Handle< Geom_Curve > TopOpeBRepTool_ShapeTool::BASISCURVE ( const TopoDS_Edge & E )

static

◆ BASISSURFACE() [1/2]

static Handle< Geom_Surface > TopOpeBRepTool_ShapeTool::BASISSURFACE ( const Handle< Geom_Surface > & S )

static

◆ BASISSURFACE() [2/2]

static Handle< Geom_Surface > TopOpeBRepTool_ShapeTool::BASISSURFACE ( const TopoDS_Face & F )

static

◆ Closed()

static Standard_Boolean TopOpeBRepTool_ShapeTool::Closed	(	const TopoDS_Shape &	S1,
		const TopoDS_Shape &	S2
	)

static

indicates whether shape S1 is a closing shape on S2 or not.

◆ CurvesSameOriented()

static Standard_Boolean TopOpeBRepTool_ShapeTool::CurvesSameOriented	(	const BRepAdaptor_Curve &	C1,
		const BRepAdaptor_Curve &	C2
	)

static

◆ EdgeData() [1/2]

static Standard_Real TopOpeBRepTool_ShapeTool::EdgeData	(	const BRepAdaptor_Curve &	BRAC,
		const Standard_Real	P,
		gp_Dir &	T,
		gp_Dir &	N,
		Standard_Real &	C
	)

static

Compute tangent T, normal N, curvature C at point of parameter P on curve BRAC. Returns the tolerance indicating if T,N are null.

◆ EdgeData() [2/2]

static Standard_Real TopOpeBRepTool_ShapeTool::EdgeData	(	const TopoDS_Shape &	E,
		const Standard_Real	P,
		gp_Dir &	T,
		gp_Dir &	N,
		Standard_Real &	C
	)

static

Same as previous on edge E.

◆ EdgesSameOriented()

static Standard_Boolean TopOpeBRepTool_ShapeTool::EdgesSameOriented	(	const TopoDS_Shape &	E1,
		const TopoDS_Shape &	E2
	)

static

◆ FacesSameOriented()

static Standard_Boolean TopOpeBRepTool_ShapeTool::FacesSameOriented	(	const TopoDS_Shape &	F1,
		const TopoDS_Shape &	F2
	)

static

◆ PeriodizeParameter()

static Standard_Real TopOpeBRepTool_ShapeTool::PeriodizeParameter	(	const Standard_Real	par,
		const TopoDS_Shape &	EE,
		const TopoDS_Shape &	FF
	)

static

◆ Pnt()

static gp_Pnt TopOpeBRepTool_ShapeTool::Pnt ( const TopoDS_Shape & S )

static

Returns 3D point of vertex .

◆ Resolution3d() [1/2]

static Standard_Real TopOpeBRepTool_ShapeTool::Resolution3d	(	const Handle< Geom_Surface > &	SU,
		const Standard_Real	Tol2d
	)

static

◆ Resolution3d() [2/2]

static Standard_Real TopOpeBRepTool_ShapeTool::Resolution3d	(	const TopoDS_Face &	F,
		const Standard_Real	Tol2d
	)

static

◆ Resolution3dU()

static Standard_Real TopOpeBRepTool_ShapeTool::Resolution3dU	(	const Handle< Geom_Surface > &	SU,
		const Standard_Real	Tol2d
	)

static

◆ Resolution3dV()

static Standard_Real TopOpeBRepTool_ShapeTool::Resolution3dV	(	const Handle< Geom_Surface > &	SU,
		const Standard_Real	Tol2d
	)

static

◆ ShapesSameOriented()

static Standard_Boolean TopOpeBRepTool_ShapeTool::ShapesSameOriented	(	const TopoDS_Shape &	S1,
		const TopoDS_Shape &	S2
	)

static

◆ SurfacesSameOriented()

static Standard_Boolean TopOpeBRepTool_ShapeTool::SurfacesSameOriented	(	const BRepAdaptor_Surface &	S1,
		const BRepAdaptor_Surface &	S2
	)

static

◆ Tolerance()

static Standard_Real TopOpeBRepTool_ShapeTool::Tolerance ( const TopoDS_Shape & S )

static

Returns the tolerance of the shape ~~. If the shape ~~is Null, returns 0.~~~~

◆ UVBOUNDS() [1/2]

static void TopOpeBRepTool_ShapeTool::UVBOUNDS	(	const Handle< Geom_Surface > &	S,
		Standard_Boolean &	UPeri,
		Standard_Boolean &	VPeri,
		Standard_Real &	Umin,
		Standard_Real &	Umax,
		Standard_Real &	Vmin,
		Standard_Real &	Vmax
	)

static

◆ UVBOUNDS() [2/2]

static void TopOpeBRepTool_ShapeTool::UVBOUNDS	(	const TopoDS_Face &	F,
		Standard_Boolean &	UPeri,
		Standard_Boolean &	VPeri,
		Standard_Real &	Umin,
		Standard_Real &	Umax,
		Standard_Real &	Vmin,
		Standard_Real &	Vmax
	)

static

The documentation for this class was generated from the following file:

TopOpeBRepTool_ShapeTool.hxx

TopOpeBRepTool_ShapeTool Class Reference

Static Public Member Functions

Member Function Documentation

◆ AdjustOnPeriodic()

◆ BASISCURVE() [1/2]

◆ BASISCURVE() [2/2]

◆ BASISSURFACE() [1/2]

◆ BASISSURFACE() [2/2]

◆ Closed()

◆ CurvesSameOriented()

◆ EdgeData() [1/2]

◆ EdgeData() [2/2]

◆ EdgesSameOriented()

◆ FacesSameOriented()

◆ PeriodizeParameter()

◆ Pnt()

◆ Resolution3d() [1/2]

◆ Resolution3d() [2/2]

◆ Resolution3dU()

◆ Resolution3dV()

◆ ShapesSameOriented()

◆ SurfacesSameOriented()

◆ Tolerance()

◆ UVBOUNDS() [1/2]

◆ UVBOUNDS() [2/2]