Generalised cylinder. This surface is obtained by sweeping a curve in a given direction. The parametrization range for the parameter U is defined with referenced the curve. The parametrization range for the parameter V is ]-infinite,+infinite[ The position of the curve gives the origin for the parameter V. The continuity of the surface is CN in the V direction. More...

#include <GeomAdaptor_SurfaceOfLinearExtrusion.hxx>

Inheritance diagram for GeomAdaptor_SurfaceOfLinearExtrusion:

[legend]

Public Member Functions
	GeomAdaptor_SurfaceOfLinearExtrusion ()

	GeomAdaptor_SurfaceOfLinearExtrusion (const Handle< Adaptor3d_Curve > &C)
	The Curve is loaded. More...

	GeomAdaptor_SurfaceOfLinearExtrusion (const Handle< Adaptor3d_Curve > &C, const gp_Dir &V)
	Thew Curve and the Direction are loaded. More...

virtual Handle< Adaptor3d_Surface >	ShallowCopy () const override
	Shallow copy of adaptor. More...

void	Load (const Handle< Adaptor3d_Curve > &C)
	Changes the Curve. More...

void	Load (const gp_Dir &V)
	Changes the Direction. More...

Standard_Real	FirstUParameter () const override

Standard_Real	LastUParameter () const override

Standard_Real	FirstVParameter () const override

Standard_Real	LastVParameter () const override

GeomAbs_Shape	UContinuity () const override

GeomAbs_Shape	VContinuity () const override
	Return CN. More...

Standard_Integer	NbUIntervals (const GeomAbs_Shape S) const override
	Returns the number of U intervals for continuity <S>. May be one if UContinuity(me) >= <S> More...

Standard_Integer	NbVIntervals (const GeomAbs_Shape S) const override
	Returns the number of V intervals for continuity <S>. May be one if VContinuity(me) >= <S> More...

void	UIntervals (TColStd_Array1OfReal &T, const GeomAbs_Shape S) const override
	Returns the intervals with the requested continuity in the U direction. More...

void	VIntervals (TColStd_Array1OfReal &T, const GeomAbs_Shape S) const override
	Returns the intervals with the requested continuity in the V direction. More...

Handle< Adaptor3d_Surface >	UTrim (const Standard_Real First, const Standard_Real Last, const Standard_Real Tol) const override
	Returns a surface trimmed in the U direction equivalent of <me> between parameters <First> and <Last>. <Tol> is used to test for 3d points confusion. If <First> >= <Last> More...

Handle< Adaptor3d_Surface >	VTrim (const Standard_Real First, const Standard_Real Last, const Standard_Real Tol) const override
	Returns a surface trimmed in the V direction between parameters <First> and <Last>. <Tol> is used to test for 3d points confusion. If <First> >= <Last> More...

Standard_Boolean	IsUClosed () const override

Standard_Boolean	IsVClosed () const override

Standard_Boolean	IsUPeriodic () const override

Standard_Real	UPeriod () const override

Standard_Boolean	IsVPeriodic () const override

Standard_Real	VPeriod () const override

Standard_Real	UResolution (const Standard_Real R3d) const override
	Returns the parametric U resolution corresponding to the real space resolution <R3d>. More...

Standard_Real	VResolution (const Standard_Real R3d) const override
	Returns the parametric V resolution corresponding to the real space resolution <R3d>. More...

GeomAbs_SurfaceType	GetType () const override
	Returns the type of the surface : Plane, Cylinder, Cone, Sphere, Torus, BezierSurface, BSplineSurface, SurfaceOfRevolution, SurfaceOfExtrusion, OtherSurface. More...

gp_Pln	Plane () const override

gp_Cylinder	Cylinder () const override

gp_Cone	Cone () const override

gp_Sphere	Sphere () const override

gp_Torus	Torus () const override

Standard_Integer	UDegree () const override

Standard_Integer	NbUPoles () const override

Standard_Boolean	IsURational () const override

Standard_Boolean	IsVRational () const override

Handle< Geom_BezierSurface >	Bezier () const override
	This will NOT make a copy of the Bezier Surface : If you want to modify the Surface please make a copy yourself Also it will NOT trim the surface to myU/VFirst/Last. More...

Handle< Geom_BSplineSurface >	BSpline () const override
	This will NOT make a copy of the BSpline Surface : If you want to modify the Surface please make a copy yourself Also it will NOT trim the surface to myU/VFirst/Last. More...

gp_Ax1	AxeOfRevolution () const override

gp_Dir	Direction () const override

Handle< Adaptor3d_Curve >	BasisCurve () const override

Public Member Functions inherited from GeomAdaptor_Surface
	GeomAdaptor_Surface ()

	GeomAdaptor_Surface (const Handle< Geom_Surface > &theSurf)

	GeomAdaptor_Surface (const Handle< Geom_Surface > &theSurf, const Standard_Real theUFirst, const Standard_Real theULast, const Standard_Real theVFirst, const Standard_Real theVLast, const Standard_Real theTolU=0.0, const Standard_Real theTolV=0.0)
	Standard_ConstructionError is raised if UFirst>ULast or VFirst>VLast. More...

void	Load (const Handle< Geom_Surface > &theSurf)

void	Load (const Handle< Geom_Surface > &theSurf, const Standard_Real theUFirst, const Standard_Real theULast, const Standard_Real theVFirst, const Standard_Real theVLast, const Standard_Real theTolU=0.0, const Standard_Real theTolV=0.0)
	Standard_ConstructionError is raised if theUFirst>theULast or theVFirst>theVLast. More...

const Handle< Geom_Surface > &	Surface () const

gp_Pnt	Value (const Standard_Real U, const Standard_Real V) const override
	Computes the point of parameters U,V on the surface. More...

void	D0 (const Standard_Real U, const Standard_Real V, gp_Pnt &P) const override
	Computes the point of parameters U,V on the surface. More...

void	D1 (const Standard_Real U, const Standard_Real V, gp_Pnt &P, gp_Vec &D1U, gp_Vec &D1V) const override
	Computes the point and the first derivatives on the surface. More...

void	D2 (const Standard_Real U, const Standard_Real V, gp_Pnt &P, gp_Vec &D1U, gp_Vec &D1V, gp_Vec &D2U, gp_Vec &D2V, gp_Vec &D2UV) const override
	Computes the point, the first and second derivatives on the surface. More...

void	D3 (const Standard_Real U, const Standard_Real V, gp_Pnt &P, gp_Vec &D1U, gp_Vec &D1V, gp_Vec &D2U, gp_Vec &D2V, gp_Vec &D2UV, gp_Vec &D3U, gp_Vec &D3V, gp_Vec &D3UUV, gp_Vec &D3UVV) const override
	Computes the point, the first, second and third derivatives on the surface. More...

gp_Vec	DN (const Standard_Real U, const Standard_Real V, const Standard_Integer Nu, const Standard_Integer Nv) const override
	Computes the derivative of order Nu in the direction U and Nv in the direction V at the point P(U, V). More...

Standard_Integer	VDegree () const override

Standard_Integer	NbVPoles () const override

Standard_Integer	NbUKnots () const override

Standard_Integer	NbVKnots () const override

Handle< Adaptor3d_Surface >	BasisSurface () const override

Standard_Real	OffsetValue () const override

Public Member Functions inherited from Adaptor3d_Surface
virtual	~Adaptor3d_Surface ()

Public Member Functions inherited from Standard_Transient
	Standard_Transient ()
	Empty constructor. More...

	Standard_Transient (const Standard_Transient &)
	Copy constructor – does nothing. More...

Standard_Transient &	operator= (const Standard_Transient &)
	Assignment operator, needed to avoid copying reference counter. More...

virtual	~Standard_Transient ()
	Destructor must be virtual. More...

virtual void	Delete () const
	Memory deallocator for transient classes. More...

virtual const opencascade::handle< Standard_Type > &	DynamicType () const
	Returns a type descriptor about this object. More...

Standard_Boolean	IsInstance (const opencascade::handle< Standard_Type > &theType) const
	Returns a true value if this is an instance of Type. More...

Standard_Boolean	IsInstance (const Standard_CString theTypeName) const
	Returns a true value if this is an instance of TypeName. More...

Standard_Boolean	IsKind (const opencascade::handle< Standard_Type > &theType) const
	Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...

Standard_Boolean	IsKind (const Standard_CString theTypeName) const
	Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...

Standard_Transient *	This () const
	Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero. More...

Standard_Integer	GetRefCount () const
	Get the reference counter of this object. More...

void	IncrementRefCounter () const
	Increments the reference counter of this object. More...

Standard_Integer	DecrementRefCounter () const
	Decrements the reference counter of this object; returns the decremented value. More...

Additional Inherited Members
Public Types inherited from Standard_Transient
typedef void	base_type
	Returns a type descriptor about this object. More...

Static Public Member Functions inherited from Standard_Transient
static const char *	get_type_name ()
	Returns a type descriptor about this object. More...

static const opencascade::handle< Standard_Type > &	get_type_descriptor ()
	Returns type descriptor of Standard_Transient class. More...

Protected Attributes inherited from GeomAdaptor_Surface
Handle< Geom_Surface >	mySurface

Standard_Real	myUFirst

Standard_Real	myULast

Standard_Real	myVFirst

Standard_Real	myVLast

Standard_Real	myTolU

Standard_Real	myTolV

Handle< Geom_BSplineSurface >	myBSplineSurface
	B-spline representation to prevent downcasts. More...

Handle< BSplSLib_Cache >	mySurfaceCache
	Cached data for B-spline or Bezier surface. More...

GeomAbs_SurfaceType	mySurfaceType

Handle< GeomEvaluator_Surface >	myNestedEvaluator
	Calculates values of nested complex surfaces (offset surface, surface of extrusion or revolution) More...

Detailed Description

Generalised cylinder. This surface is obtained by sweeping a curve in a given direction. The parametrization range for the parameter U is defined with referenced the curve. The parametrization range for the parameter V is ]-infinite,+infinite[ The position of the curve gives the origin for the parameter V. The continuity of the surface is CN in the V direction.

Constructor & Destructor Documentation

◆ GeomAdaptor_SurfaceOfLinearExtrusion() [1/3]

GeomAdaptor_SurfaceOfLinearExtrusion::GeomAdaptor_SurfaceOfLinearExtrusion ( )

◆ GeomAdaptor_SurfaceOfLinearExtrusion() [2/3]

GeomAdaptor_SurfaceOfLinearExtrusion::GeomAdaptor_SurfaceOfLinearExtrusion ( const Handle< Adaptor3d_Curve > & C )

The Curve is loaded.

◆ GeomAdaptor_SurfaceOfLinearExtrusion() [3/3]

GeomAdaptor_SurfaceOfLinearExtrusion::GeomAdaptor_SurfaceOfLinearExtrusion	(	const Handle< Adaptor3d_Curve > &	C,
		const gp_Dir &	V
	)

Thew Curve and the Direction are loaded.

Member Function Documentation

◆ AxeOfRevolution()

gp_Ax1 GeomAdaptor_SurfaceOfLinearExtrusion::AxeOfRevolution ( ) const

overridevirtual

Reimplemented from GeomAdaptor_Surface.

◆ BasisCurve()

Handle< Adaptor3d_Curve > GeomAdaptor_SurfaceOfLinearExtrusion::BasisCurve ( ) const

overridevirtual

Reimplemented from GeomAdaptor_Surface.

◆ Bezier()

Handle< Geom_BezierSurface > GeomAdaptor_SurfaceOfLinearExtrusion::Bezier ( ) const

overridevirtual

This will NOT make a copy of the Bezier Surface : If you want to modify the Surface please make a copy yourself Also it will NOT trim the surface to myU/VFirst/Last.

Reimplemented from GeomAdaptor_Surface.

◆ BSpline()

Handle< Geom_BSplineSurface > GeomAdaptor_SurfaceOfLinearExtrusion::BSpline ( ) const

overridevirtual

This will NOT make a copy of the BSpline Surface : If you want to modify the Surface please make a copy yourself Also it will NOT trim the surface to myU/VFirst/Last.

Reimplemented from GeomAdaptor_Surface.

◆ Cone()

gp_Cone GeomAdaptor_SurfaceOfLinearExtrusion::Cone ( ) const

overridevirtual

Reimplemented from GeomAdaptor_Surface.

◆ Cylinder()

gp_Cylinder GeomAdaptor_SurfaceOfLinearExtrusion::Cylinder ( ) const

overridevirtual

Reimplemented from GeomAdaptor_Surface.

◆ Direction()

gp_Dir GeomAdaptor_SurfaceOfLinearExtrusion::Direction ( ) const

overridevirtual

Reimplemented from GeomAdaptor_Surface.

◆ FirstUParameter()

Standard_Real GeomAdaptor_SurfaceOfLinearExtrusion::FirstUParameter ( ) const

overridevirtual

Reimplemented from GeomAdaptor_Surface.

◆ FirstVParameter()

Standard_Real GeomAdaptor_SurfaceOfLinearExtrusion::FirstVParameter ( ) const

overridevirtual

Reimplemented from GeomAdaptor_Surface.

◆ GetType()

GeomAbs_SurfaceType GeomAdaptor_SurfaceOfLinearExtrusion::GetType ( ) const

overridevirtual

Returns the type of the surface : Plane, Cylinder, Cone, Sphere, Torus, BezierSurface, BSplineSurface, SurfaceOfRevolution, SurfaceOfExtrusion, OtherSurface.

Reimplemented from GeomAdaptor_Surface.

◆ IsUClosed()

Standard_Boolean GeomAdaptor_SurfaceOfLinearExtrusion::IsUClosed ( ) const

overridevirtual

Reimplemented from GeomAdaptor_Surface.

◆ IsUPeriodic()

Standard_Boolean GeomAdaptor_SurfaceOfLinearExtrusion::IsUPeriodic ( ) const

overridevirtual

Reimplemented from GeomAdaptor_Surface.

◆ IsURational()

Standard_Boolean GeomAdaptor_SurfaceOfLinearExtrusion::IsURational ( ) const

overridevirtual

Reimplemented from GeomAdaptor_Surface.

◆ IsVClosed()

Standard_Boolean GeomAdaptor_SurfaceOfLinearExtrusion::IsVClosed ( ) const

overridevirtual

Reimplemented from GeomAdaptor_Surface.

◆ IsVPeriodic()

Standard_Boolean GeomAdaptor_SurfaceOfLinearExtrusion::IsVPeriodic ( ) const

overridevirtual

Reimplemented from GeomAdaptor_Surface.

◆ IsVRational()

Standard_Boolean GeomAdaptor_SurfaceOfLinearExtrusion::IsVRational ( ) const

overridevirtual

Reimplemented from GeomAdaptor_Surface.

◆ LastUParameter()

Standard_Real GeomAdaptor_SurfaceOfLinearExtrusion::LastUParameter ( ) const

overridevirtual

Reimplemented from GeomAdaptor_Surface.

◆ LastVParameter()

Standard_Real GeomAdaptor_SurfaceOfLinearExtrusion::LastVParameter ( ) const

overridevirtual

Reimplemented from GeomAdaptor_Surface.

◆ Load() [1/2]

void GeomAdaptor_SurfaceOfLinearExtrusion::Load ( const Handle< Adaptor3d_Curve > & C )

Changes the Curve.

◆ Load() [2/2]

void GeomAdaptor_SurfaceOfLinearExtrusion::Load ( const gp_Dir & V )

Changes the Direction.

◆ NbUIntervals()

Standard_Integer GeomAdaptor_SurfaceOfLinearExtrusion::NbUIntervals ( const GeomAbs_Shape S ) const

overridevirtual

Returns the number of U intervals for continuity <S>. May be one if UContinuity(me) >= <S>

Reimplemented from GeomAdaptor_Surface.

◆ NbUPoles()

Standard_Integer GeomAdaptor_SurfaceOfLinearExtrusion::NbUPoles ( ) const

overridevirtual

Reimplemented from GeomAdaptor_Surface.

◆ NbVIntervals()

Standard_Integer GeomAdaptor_SurfaceOfLinearExtrusion::NbVIntervals ( const GeomAbs_Shape S ) const

overridevirtual

Returns the number of V intervals for continuity <S>. May be one if VContinuity(me) >= <S>

Reimplemented from GeomAdaptor_Surface.

◆ Plane()

gp_Pln GeomAdaptor_SurfaceOfLinearExtrusion::Plane ( ) const

overridevirtual

Reimplemented from GeomAdaptor_Surface.

◆ ShallowCopy()

virtual Handle< Adaptor3d_Surface > GeomAdaptor_SurfaceOfLinearExtrusion::ShallowCopy ( ) const

overridevirtual

Shallow copy of adaptor.

Reimplemented from GeomAdaptor_Surface.

◆ Sphere()

gp_Sphere GeomAdaptor_SurfaceOfLinearExtrusion::Sphere ( ) const

overridevirtual

Reimplemented from GeomAdaptor_Surface.

◆ Torus()

gp_Torus GeomAdaptor_SurfaceOfLinearExtrusion::Torus ( ) const

overridevirtual

Reimplemented from GeomAdaptor_Surface.

◆ UContinuity()

GeomAbs_Shape GeomAdaptor_SurfaceOfLinearExtrusion::UContinuity ( ) const

overridevirtual

Reimplemented from GeomAdaptor_Surface.

◆ UDegree()

Standard_Integer GeomAdaptor_SurfaceOfLinearExtrusion::UDegree ( ) const

overridevirtual

Reimplemented from GeomAdaptor_Surface.

◆ UIntervals()

void GeomAdaptor_SurfaceOfLinearExtrusion::UIntervals	(	TColStd_Array1OfReal &	T,
		const GeomAbs_Shape	S
	)		const

overridevirtual

Returns the intervals with the requested continuity in the U direction.

Reimplemented from GeomAdaptor_Surface.

◆ UPeriod()

Standard_Real GeomAdaptor_SurfaceOfLinearExtrusion::UPeriod ( ) const

overridevirtual

Reimplemented from GeomAdaptor_Surface.

◆ UResolution()

Standard_Real GeomAdaptor_SurfaceOfLinearExtrusion::UResolution ( const Standard_Real R3d ) const

overridevirtual

Returns the parametric U resolution corresponding to the real space resolution <R3d>.

Reimplemented from GeomAdaptor_Surface.

◆ UTrim()

Handle< Adaptor3d_Surface > GeomAdaptor_SurfaceOfLinearExtrusion::UTrim	(	const Standard_Real	First,
		const Standard_Real	Last,
		const Standard_Real	Tol
	)		const

overridevirtual

Returns a surface trimmed in the U direction equivalent of <me> between parameters <First> and <Last>. <Tol> is used to test for 3d points confusion. If <First> >= <Last>

Reimplemented from GeomAdaptor_Surface.

◆ VContinuity()

GeomAbs_Shape GeomAdaptor_SurfaceOfLinearExtrusion::VContinuity ( ) const

overridevirtual

Return CN.

Reimplemented from GeomAdaptor_Surface.

◆ VIntervals()

void GeomAdaptor_SurfaceOfLinearExtrusion::VIntervals	(	TColStd_Array1OfReal &	T,
		const GeomAbs_Shape	S
	)		const

overridevirtual

Returns the intervals with the requested continuity in the V direction.

Reimplemented from GeomAdaptor_Surface.

◆ VPeriod()

Standard_Real GeomAdaptor_SurfaceOfLinearExtrusion::VPeriod ( ) const

overridevirtual

Reimplemented from GeomAdaptor_Surface.

◆ VResolution()

Standard_Real GeomAdaptor_SurfaceOfLinearExtrusion::VResolution ( const Standard_Real R3d ) const

overridevirtual

Returns the parametric V resolution corresponding to the real space resolution <R3d>.

Reimplemented from GeomAdaptor_Surface.

◆ VTrim()

Handle< Adaptor3d_Surface > GeomAdaptor_SurfaceOfLinearExtrusion::VTrim	(	const Standard_Real	First,
		const Standard_Real	Last,
		const Standard_Real	Tol
	)		const

overridevirtual

Returns a surface trimmed in the V direction between parameters <First> and <Last>. <Tol> is used to test for 3d points confusion. If <First> >= <Last>

Reimplemented from GeomAdaptor_Surface.

The documentation for this class was generated from the following file:

GeomAdaptor_SurfaceOfLinearExtrusion.hxx

Public Member Functions

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ GeomAdaptor_SurfaceOfLinearExtrusion() [1/3]

◆ GeomAdaptor_SurfaceOfLinearExtrusion() [2/3]

◆ GeomAdaptor_SurfaceOfLinearExtrusion() [3/3]

Member Function Documentation

◆ AxeOfRevolution()

◆ BasisCurve()

◆ Bezier()

◆ BSpline()

◆ Cone()

◆ Cylinder()

◆ Direction()

◆ FirstUParameter()

◆ FirstVParameter()

◆ GetType()

◆ IsUClosed()

◆ IsUPeriodic()

◆ IsURational()

◆ IsVClosed()

◆ IsVPeriodic()

◆ IsVRational()

◆ LastUParameter()

◆ LastVParameter()

◆ Load() [1/2]

◆ Load() [2/2]

◆ NbUIntervals()

◆ NbUPoles()

◆ NbVIntervals()

◆ Plane()

◆ ShallowCopy()

◆ Sphere()

◆ Torus()

◆ UContinuity()

◆ UDegree()

◆ UIntervals()

◆ UPeriod()

◆ UResolution()

◆ UTrim()

◆ VContinuity()

◆ VIntervals()

◆ VPeriod()

◆ VResolution()

◆ VTrim()