Provides methods to transfer CurveAndSurface from IGES to CASCADE. More...

#include <IGESToBRep_CurveAndSurface.hxx>

Inheritance diagram for IGESToBRep_CurveAndSurface:

[legend]

Public Member Functions
	IGESToBRep_CurveAndSurface ()
	Creates a tool CurveAndSurface ready to run, with epsilons set to 1.E-04, myModeTopo to True, the optimization of the continuity to False.

	IGESToBRep_CurveAndSurface (const Standard_Real eps, const Standard_Real epsGeom, const Standard_Real epsCoeff, const Standard_Boolean mode, const Standard_Boolean modeapprox, const Standard_Boolean optimized)
	Creates a tool CurveAndSurface ready to run.

void	Init ()
	Initializes the field of the tool CurveAndSurface with default creating values.

void	SetEpsilon (const Standard_Real eps)
	Changes the value of "myEps".

Standard_Real	GetEpsilon () const
	Returns the value of "myEps".

void	SetEpsCoeff (const Standard_Real eps)
	Changes the value of "myEpsCoeff".

Standard_Real	GetEpsCoeff () const
	Returns the value of "myEpsCoeff".

void	SetEpsGeom (const Standard_Real eps)
	Changes the value of "myEpsGeom".

Standard_Real	GetEpsGeom () const
	Returns the value of "myEpsGeom".

void	SetMinTol (const Standard_Real mintol)
	Changes the value of "myMinTol".

void	SetMaxTol (const Standard_Real maxtol)
	Changes the value of "myMaxTol".

void	UpdateMinMaxTol ()
	Sets values of "myMinTol" and "myMaxTol" as follows myMaxTol = Max ("read.maxprecision.val", myEpsGeom * myUnitFactor) myMinTol = Precision::Confusion() Remark: This method is automatically invoked each time the values of "myEpsGeom" or "myUnitFactor" are changed.

Standard_Real	GetMinTol () const
	Returns the value of "myMinTol".

Standard_Real	GetMaxTol () const
	Returns the value of "myMaxTol".

void	SetModeApprox (const Standard_Boolean mode)
	Changes the value of "myModeApprox".

Standard_Boolean	GetModeApprox () const
	Returns the value of "myModeApprox".

void	SetModeTransfer (const Standard_Boolean mode)
	Changes the value of "myModeIsTopo".

Standard_Boolean	GetModeTransfer () const
	Returns the value of "myModeIsTopo".

void	SetOptimized (const Standard_Boolean optimized)
	Changes the value of "myContIsOpti".

Standard_Boolean	GetOptimized () const
	Returns the value of "myContIsOpti".

Standard_Real	GetUnitFactor () const
	Returns the value of " myUnitFactor".

void	SetSurfaceCurve (const Standard_Integer ival)
	Changes the value of "mySurfaceCurve".

Standard_Integer	GetSurfaceCurve () const
	Returns the value of " mySurfaceCurve" 0 = value in file , 2 = kepp 2d and compute 3d 3 = keep 3d and compute 2d.

void	SetModel (const Handle< IGESData_IGESModel > &model)
	Set the value of "myModel".

Handle< IGESData_IGESModel >	GetModel () const
	Returns the value of "myModel".

void	SetContinuity (const Standard_Integer continuity)
	Changes the value of "myContinuity" if continuity = 0 do nothing else if continuity = 1 try C1 if continuity = 2 try C2.

Standard_Integer	GetContinuity () const
	Returns the value of "myContinuity".

void	SetTransferProcess (const Handle< Transfer_TransientProcess > &TP)
	Set the value of "myMsgReg".

Handle< Transfer_TransientProcess >	GetTransferProcess () const
	Returns the value of "myMsgReg".

TopoDS_Shape	TransferCurveAndSurface (const Handle< IGESData_IGESEntity > &start, const Message_ProgressRange &theProgress=Message_ProgressRange())
	Returns the result of the transfert of any IGES Curve or Surface Entity. If the transfer has failed, this member return a NullEntity.

TopoDS_Shape	TransferGeometry (const Handle< IGESData_IGESEntity > &start, const Message_ProgressRange &theProgress=Message_ProgressRange())
	Returns the result of the transfert the geometry of any IGESEntity. If the transfer has failed, this member return a NullEntity.

void	SendFail (const Handle< IGESData_IGESEntity > &start, const Message_Msg &amsg)
	Records a new Fail message.

void	SendWarning (const Handle< IGESData_IGESEntity > &start, const Message_Msg &amsg)
	Records a new Warning message.

void	SendMsg (const Handle< IGESData_IGESEntity > &start, const Message_Msg &amsg)
	Records a new Information message from the definition of a Msg (Original+Value)

Standard_Boolean	HasShapeResult (const Handle< IGESData_IGESEntity > &start) const
	Returns True if start was already treated and has a result in "myMap" else returns False.

TopoDS_Shape	GetShapeResult (const Handle< IGESData_IGESEntity > &start) const
	Returns the result of the transfer of the IGESEntity "start" contained in "myMap" . (if HasShapeResult is True).

void	SetShapeResult (const Handle< IGESData_IGESEntity > &start, const TopoDS_Shape &result)
	set in "myMap" the result of the transfer of the IGESEntity "start".

Standard_Integer	NbShapeResult (const Handle< IGESData_IGESEntity > &start) const
	Returns the number of shapes results contained in "myMap" for the IGESEntity start ( type VertexList or EdgeList).

TopoDS_Shape	GetShapeResult (const Handle< IGESData_IGESEntity > &start, const Standard_Integer num) const
	Returns the numth result of the IGESEntity start (type VertexList or EdgeList) in "myMap". (if NbShapeResult is not null).

void	AddShapeResult (const Handle< IGESData_IGESEntity > &start, const TopoDS_Shape &result)
	set in "myMap" the result of the transfer of the entity of the IGESEntity start ( type VertexList or EdgeList).

void	SetSurface (const Handle< Geom_Surface > &theSurface)

Handle< Geom_Surface >	Surface () const

Standard_Real	GetUVResolution ()

Detailed Description

Provides methods to transfer CurveAndSurface from IGES to CASCADE.

Constructor & Destructor Documentation

◆ IGESToBRep_CurveAndSurface() [1/2]

IGESToBRep_CurveAndSurface::IGESToBRep_CurveAndSurface ( )

Creates a tool CurveAndSurface ready to run, with epsilons set to 1.E-04, myModeTopo to True, the optimization of the continuity to False.

◆ IGESToBRep_CurveAndSurface() [2/2]

IGESToBRep_CurveAndSurface::IGESToBRep_CurveAndSurface	(	const Standard_Real	eps,
		const Standard_Real	epsGeom,
		const Standard_Real	epsCoeff,
		const Standard_Boolean	mode,
		const Standard_Boolean	modeapprox,
		const Standard_Boolean	optimized
	)

Creates a tool CurveAndSurface ready to run.

Member Function Documentation

◆ AddShapeResult()

void IGESToBRep_CurveAndSurface::AddShapeResult	(	const Handle< IGESData_IGESEntity > &	start,
		const TopoDS_Shape &	result
	)

set in "myMap" the result of the transfer of the entity of the IGESEntity start ( type VertexList or EdgeList).

◆ GetContinuity()

Standard_Integer IGESToBRep_CurveAndSurface::GetContinuity ( ) const

Returns the value of "myContinuity".

◆ GetEpsCoeff()

Standard_Real IGESToBRep_CurveAndSurface::GetEpsCoeff ( ) const

Returns the value of "myEpsCoeff".

◆ GetEpsGeom()

Standard_Real IGESToBRep_CurveAndSurface::GetEpsGeom ( ) const

Returns the value of "myEpsGeom".

◆ GetEpsilon()

Standard_Real IGESToBRep_CurveAndSurface::GetEpsilon ( ) const

Returns the value of "myEps".

◆ GetMaxTol()

Standard_Real IGESToBRep_CurveAndSurface::GetMaxTol ( ) const

Returns the value of "myMaxTol".

◆ GetMinTol()

Standard_Real IGESToBRep_CurveAndSurface::GetMinTol ( ) const

Returns the value of "myMinTol".

◆ GetModeApprox()

Standard_Boolean IGESToBRep_CurveAndSurface::GetModeApprox ( ) const

Returns the value of "myModeApprox".

◆ GetModel()

Handle< IGESData_IGESModel > IGESToBRep_CurveAndSurface::GetModel ( ) const

Returns the value of "myModel".

◆ GetModeTransfer()

Standard_Boolean IGESToBRep_CurveAndSurface::GetModeTransfer ( ) const

Returns the value of "myModeIsTopo".

◆ GetOptimized()

Standard_Boolean IGESToBRep_CurveAndSurface::GetOptimized ( ) const

Returns the value of "myContIsOpti".

◆ GetShapeResult() [1/2]

TopoDS_Shape IGESToBRep_CurveAndSurface::GetShapeResult ( const Handle< IGESData_IGESEntity > & start ) const

Returns the result of the transfer of the IGESEntity "start" contained in "myMap" . (if HasShapeResult is True).

◆ GetShapeResult() [2/2]

TopoDS_Shape IGESToBRep_CurveAndSurface::GetShapeResult	(	const Handle< IGESData_IGESEntity > &	start,
		const Standard_Integer	num
	)		const

Returns the numth result of the IGESEntity start (type VertexList or EdgeList) in "myMap". (if NbShapeResult is not null).

◆ GetSurfaceCurve()

Standard_Integer IGESToBRep_CurveAndSurface::GetSurfaceCurve ( ) const

Returns the value of " mySurfaceCurve" 0 = value in file , 2 = kepp 2d and compute 3d 3 = keep 3d and compute 2d.

◆ GetTransferProcess()

Handle< Transfer_TransientProcess > IGESToBRep_CurveAndSurface::GetTransferProcess ( ) const

Returns the value of "myMsgReg".

◆ GetUnitFactor()

Standard_Real IGESToBRep_CurveAndSurface::GetUnitFactor ( ) const

Returns the value of " myUnitFactor".

◆ GetUVResolution()

Standard_Real IGESToBRep_CurveAndSurface::GetUVResolution ( )

◆ HasShapeResult()

Standard_Boolean IGESToBRep_CurveAndSurface::HasShapeResult ( const Handle< IGESData_IGESEntity > & start ) const

Returns True if start was already treated and has a result in "myMap" else returns False.

◆ Init()

void IGESToBRep_CurveAndSurface::Init ( )

Initializes the field of the tool CurveAndSurface with default creating values.

◆ NbShapeResult()

Standard_Integer IGESToBRep_CurveAndSurface::NbShapeResult ( const Handle< IGESData_IGESEntity > & start ) const

Returns the number of shapes results contained in "myMap" for the IGESEntity start ( type VertexList or EdgeList).

◆ SendFail()

void IGESToBRep_CurveAndSurface::SendFail	(	const Handle< IGESData_IGESEntity > &	start,
		const Message_Msg &	amsg
	)

Records a new Fail message.

◆ SendMsg()

void IGESToBRep_CurveAndSurface::SendMsg	(	const Handle< IGESData_IGESEntity > &	start,
		const Message_Msg &	amsg
	)

Records a new Information message from the definition of a Msg (Original+Value)

◆ SendWarning()

void IGESToBRep_CurveAndSurface::SendWarning	(	const Handle< IGESData_IGESEntity > &	start,
		const Message_Msg &	amsg
	)

Records a new Warning message.

◆ SetContinuity()

void IGESToBRep_CurveAndSurface::SetContinuity ( const Standard_Integer continuity )

Changes the value of "myContinuity" if continuity = 0 do nothing else if continuity = 1 try C1 if continuity = 2 try C2.

◆ SetEpsCoeff()

void IGESToBRep_CurveAndSurface::SetEpsCoeff ( const Standard_Real eps )

Changes the value of "myEpsCoeff".

◆ SetEpsGeom()

void IGESToBRep_CurveAndSurface::SetEpsGeom ( const Standard_Real eps )

Changes the value of "myEpsGeom".

◆ SetEpsilon()

void IGESToBRep_CurveAndSurface::SetEpsilon ( const Standard_Real eps )

Changes the value of "myEps".

◆ SetMaxTol()

void IGESToBRep_CurveAndSurface::SetMaxTol ( const Standard_Real maxtol )

Changes the value of "myMaxTol".

◆ SetMinTol()

void IGESToBRep_CurveAndSurface::SetMinTol ( const Standard_Real mintol )

Changes the value of "myMinTol".

◆ SetModeApprox()

void IGESToBRep_CurveAndSurface::SetModeApprox ( const Standard_Boolean mode )

Changes the value of "myModeApprox".

◆ SetModel()

void IGESToBRep_CurveAndSurface::SetModel ( const Handle< IGESData_IGESModel > & model )

Set the value of "myModel".

◆ SetModeTransfer()

void IGESToBRep_CurveAndSurface::SetModeTransfer ( const Standard_Boolean mode )

Changes the value of "myModeIsTopo".

◆ SetOptimized()

void IGESToBRep_CurveAndSurface::SetOptimized ( const Standard_Boolean optimized )

Changes the value of "myContIsOpti".

◆ SetShapeResult()

void IGESToBRep_CurveAndSurface::SetShapeResult	(	const Handle< IGESData_IGESEntity > &	start,
		const TopoDS_Shape &	result
	)

set in "myMap" the result of the transfer of the IGESEntity "start".

◆ SetSurface()

void IGESToBRep_CurveAndSurface::SetSurface ( const Handle< Geom_Surface > & theSurface )

◆ SetSurfaceCurve()

void IGESToBRep_CurveAndSurface::SetSurfaceCurve ( const Standard_Integer ival )

Changes the value of "mySurfaceCurve".

◆ SetTransferProcess()

void IGESToBRep_CurveAndSurface::SetTransferProcess ( const Handle< Transfer_TransientProcess > & TP )

Set the value of "myMsgReg".

◆ Surface()

Handle< Geom_Surface > IGESToBRep_CurveAndSurface::Surface ( ) const

◆ TransferCurveAndSurface()

TopoDS_Shape IGESToBRep_CurveAndSurface::TransferCurveAndSurface	(	const Handle< IGESData_IGESEntity > &	start,
		const Message_ProgressRange &	theProgress = `Message_ProgressRange()`
	)

Returns the result of the transfert of any IGES Curve or Surface Entity. If the transfer has failed, this member return a NullEntity.

◆ TransferGeometry()

TopoDS_Shape IGESToBRep_CurveAndSurface::TransferGeometry	(	const Handle< IGESData_IGESEntity > &	start,
		const Message_ProgressRange &	theProgress = `Message_ProgressRange()`
	)

Returns the result of the transfert the geometry of any IGESEntity. If the transfer has failed, this member return a NullEntity.

◆ UpdateMinMaxTol()

void IGESToBRep_CurveAndSurface::UpdateMinMaxTol ( )

Sets values of "myMinTol" and "myMaxTol" as follows myMaxTol = Max ("read.maxprecision.val", myEpsGeom * myUnitFactor) myMinTol = Precision::Confusion() Remark: This method is automatically invoked each time the values of "myEpsGeom" or "myUnitFactor" are changed.

The documentation for this class was generated from the following file:

IGESToBRep_CurveAndSurface.hxx

Public Member Functions