A framework to define a sensitive 3D curve. In some cases this class can raise Standard_ConstructionError and Standard_OutOfRange exceptions. For more details see Select3D_SensitivePoly. More...

#include <Select3D_SensitiveCurve.hxx>

Inheritance diagram for Select3D_SensitiveCurve:

[legend]

Public Member Functions
	Select3D_SensitiveCurve (const Handle< SelectMgr_EntityOwner > &theOwnerId, const Handle< Geom_Curve > &theCurve, const Standard_Integer theNbPnts=17)
	Constructs a sensitive curve object defined by the owner theOwnerId, the curve theCurve, and the maximum number of points on the curve: theNbPnts.

	Select3D_SensitiveCurve (const Handle< SelectMgr_EntityOwner > &theOwnerId, const Handle< TColgp_HArray1OfPnt > &thePoints)
	Constructs a sensitive curve object defined by the owner theOwnerId and the set of points ThePoints.

	Select3D_SensitiveCurve (const Handle< SelectMgr_EntityOwner > &theOwnerId, const TColgp_Array1OfPnt &thePoints)
	Creation of Sensitive Curve from Points. Warning : This Method should disappear in the next version...

virtual Handle< Select3D_SensitiveEntity >	GetConnected () override
	Returns the copy of this.

Public Member Functions inherited from Select3D_SensitivePoly
	Select3D_SensitivePoly (const Handle< SelectMgr_EntityOwner > &theOwnerId, const TColgp_Array1OfPnt &thePoints, const Standard_Boolean theIsBVHEnabled)
	Constructs a sensitive face object defined by the owner OwnerId, the array of points ThePoints, and the sensitivity type Sensitivity. The array of points is the outer polygon of the geometric face.

	Select3D_SensitivePoly (const Handle< SelectMgr_EntityOwner > &theOwnerId, const Handle< TColgp_HArray1OfPnt > &thePoints, const Standard_Boolean theIsBVHEnabled)
	Constructs a sensitive face object defined by the owner OwnerId, the array of points ThePoints, and the sensitivity type Sensitivity. The array of points is the outer polygon of the geometric face.

	Select3D_SensitivePoly (const Handle< SelectMgr_EntityOwner > &theOwnerId, const gp_Circ &theCircle, const Standard_Real theU1, const Standard_Real theU2, const Standard_Boolean theIsFilled=Standard_False, const Standard_Integer theNbPnts=12)
	Constructs the sensitive arc object defined by the owner theOwnerId, the circle theCircle, the parameters theU1 and theU2, the boolean theIsFilled and the number of points theNbPnts. theU1 and theU2 define the first and last points of the arc on theCircle.

	Select3D_SensitivePoly (const Handle< SelectMgr_EntityOwner > &theOwnerId, const Standard_Boolean theIsBVHEnabled, const Standard_Integer theNbPnts=6)
	Constructs a sensitive curve or arc object defined by the owner theOwnerId, the theIsBVHEnabled flag, and the maximum number of points on the curve: theNbPnts.

virtual Standard_Boolean	Matches (SelectBasics_SelectingVolumeManager &theMgr, SelectBasics_PickResult &thePickResult) override
	Checks whether the poly overlaps current selecting volume.

virtual Standard_Integer	NbSubElements () const override
	Returns the amount of segments in poly.

void	Points3D (Handle< TColgp_HArray1OfPnt > &theHArrayOfPnt)
	Returns the 3D points of the array used at construction time.

void	ArrayBounds (Standard_Integer &theLow, Standard_Integer &theUp) const
	Return array bounds.

gp_Pnt	GetPoint3d (const Standard_Integer thePntIdx) const
	Return point.

virtual Select3D_BndBox3d	BoundingBox () override
	Returns bounding box of a polygon. If location transformation is set, it will be applied.

virtual gp_Pnt	CenterOfGeometry () const override
	Returns center of the point set. If location transformation is set, it will be applied.

virtual Standard_Integer	Size () const override
	Returns the amount of segments of the poly.

virtual Select3D_BndBox3d	Box (const Standard_Integer theIdx) const override
	Returns bounding box of segment with index theIdx.

virtual Standard_Real	Center (const Standard_Integer theIdx, const Standard_Integer theAxis) const override
	Returns geometry center of sensitive entity index theIdx in the vector along the given axis theAxis.

virtual void	Swap (const Standard_Integer theIdx1, const Standard_Integer theIdx2) override
	Swaps items with indexes theIdx1 and theIdx2 in the vector.

virtual void	DumpJson (Standard_OStream &theOStream, Standard_Integer theDepth=-1) const override
	Dumps the content of me into the stream.

Public Member Functions inherited from Select3D_SensitiveSet
	Select3D_SensitiveSet (const Handle< SelectMgr_EntityOwner > &theOwnerId)
	Creates new empty sensitive set and its content.

virtual void	BVH () override
	Builds BVH tree for sensitive set. Must be called manually to build BVH tree for any sensitive set in case if its content was initialized not in a constructor, but element by element.

virtual Standard_Boolean	ToBuildBVH () const override
	Returns TRUE if BVH tree is in invalidated state.

void	SetBuilder (const Handle< Select3D_BVHBuilder3d > &theBuilder)
	Sets the method (builder) used to construct BVH.

void	MarkDirty ()
	Marks BVH tree of the set as outdated. It will be rebuild at the next call of BVH()

virtual void	Clear () override
	Destroys cross-reference to avoid memory leak.

Standard_Integer	GetLeafNodeSize () const
	Returns a number of nodes in 1 BVH leaf.

Public Member Functions inherited from Select3D_SensitiveEntity
const Handle< SelectMgr_EntityOwner > &	OwnerId () const
	Returns pointer to owner of the entity.

virtual void	Set (const Handle< SelectMgr_EntityOwner > &theOwnerId)
	Sets owner of the entity.

Standard_Integer	SensitivityFactor () const
	allows a better sensitivity for a specific entity in selection algorithms useful for small sized entities.

void	SetSensitivityFactor (const Standard_Integer theNewSens)
	Allows to manage sensitivity of a particular sensitive entity.

virtual Standard_Boolean	HasInitLocation () const
	Returns true if the shape corresponding to the entity has init location.

virtual gp_GTrsf	InvInitLocation () const
	Returns inversed location transformation matrix if the shape corresponding to this entity has init location set. Otherwise, returns identity matrix.

const Handle< Graphic3d_TransformPers > &	TransformPersistence () const
	Return transformation persistence.

virtual void	SetTransformPersistence (const Handle< Graphic3d_TransformPers > &theTrsfPers)
	Set transformation persistence.

Public Member Functions inherited from Standard_Transient
	Standard_Transient ()
	Empty constructor.

	Standard_Transient (const Standard_Transient &)
	Copy constructor – does nothing.

Standard_Transient &	operator= (const Standard_Transient &)
	Assignment operator, needed to avoid copying reference counter.

virtual	~Standard_Transient ()
	Destructor must be virtual.

virtual const opencascade::handle< Standard_Type > &	DynamicType () const
	Returns a type descriptor about this object.

Standard_Boolean	IsInstance (const opencascade::handle< Standard_Type > &theType) const
	Returns a true value if this is an instance of Type.

Standard_Boolean	IsInstance (const Standard_CString theTypeName) const
	Returns a true value if this is an instance of TypeName.

Standard_Boolean	IsKind (const opencascade::handle< Standard_Type > &theType) const
	Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism.

Standard_Boolean	IsKind (const Standard_CString theTypeName) const
	Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism.

Standard_Transient *	This () const
	Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero.

Standard_Integer	GetRefCount () const noexcept
	Get the reference counter of this object.

void	IncrementRefCounter () noexcept
	Increments the reference counter of this object.

Standard_Integer	DecrementRefCounter () noexcept
	Decrements the reference counter of this object; returns the decremented value.

virtual void	Delete () const
	Memory deallocator for transient classes.

Additional Inherited Members
Public Types inherited from Standard_Transient
typedef void	base_type
	Returns a type descriptor about this object.

Static Public Member Functions inherited from Select3D_SensitiveSet
static const Handle< Select3D_BVHBuilder3d > &	DefaultBVHBuilder ()
	Return global instance to default BVH builder.

static void	SetDefaultBVHBuilder (const Handle< Select3D_BVHBuilder3d > &theBuilder)
	Assign new BVH builder to be used by default for new sensitive sets (assigning is NOT thread-safe!).

Static Public Member Functions inherited from Standard_Transient
static constexpr const char *	get_type_name ()
	Returns a type descriptor about this object.

static const opencascade::handle< Standard_Type > &	get_type_descriptor ()
	Returns type descriptor of Standard_Transient class.

Protected Member Functions inherited from Select3D_SensitivePoly
virtual Standard_Boolean	overlapsElement (SelectBasics_PickResult &thePickResult, SelectBasics_SelectingVolumeManager &theMgr, Standard_Integer theElemIdx, Standard_Boolean theIsFullInside) override
	Checks whether the segment with index theIdx overlaps the current selecting volume.

virtual Standard_Boolean	elementIsInside (SelectBasics_SelectingVolumeManager &theMgr, Standard_Integer theElemIdx, Standard_Boolean theIsFullInside) override
	Checks whether the entity with index theIdx is inside the current selecting volume.

virtual Standard_Real	distanceToCOG (SelectBasics_SelectingVolumeManager &theMgr) override
	Calculates distance from the 3d projection of used-picked screen point to center of the geometry.

Protected Member Functions inherited from Select3D_SensitiveSet
Standard_Boolean	matches (SelectBasics_SelectingVolumeManager &theMgr, SelectBasics_PickResult &thePickResult, Standard_Boolean theToCheckAllInside)
	Checks whether one or more entities of the set overlap current selecting volume. Implements the traverse of BVH tree built for the set.

Standard_Boolean	processElements (SelectBasics_SelectingVolumeManager &theMgr, Standard_Integer theFirstElem, Standard_Integer theLastElem, Standard_Boolean theIsFullInside, Standard_Boolean theToCheckAllInside, SelectBasics_PickResult &thePickResult, Standard_Integer &theMatchesNb)
	Process elements overlapped by the selection volume.

Protected Member Functions inherited from Select3D_SensitiveEntity
	Select3D_SensitiveEntity (const Handle< SelectMgr_EntityOwner > &theOwnerId)

Protected Attributes inherited from Select3D_SensitivePoly
Select3D_PointData	myPolyg
	Points of the poly.

gp_Pnt	myCOG
	Center of the poly.

Handle< TColStd_HArray1OfInteger >	mySegmentIndexes
	Segment indexes for BVH tree build.

Select3D_BndBox3d	myBndBox
	Bounding box of the poly.

Select3D_TypeOfSensitivity	mySensType
	Type of sensitivity: boundary or interior.

Standard_Boolean	myIsComputed
	Is true if all the points and data structures of polygon are initialized.

Protected Attributes inherited from Select3D_SensitiveSet
BvhPrimitiveSet	myContent
	A link between sensitive entity and BVH_PrimitiveSet.

Standard_Integer	myDetectedIdx
	Index of detected primitive in BVH sorted primitive array.

Protected Attributes inherited from Select3D_SensitiveEntity
Handle< SelectMgr_EntityOwner >	myOwnerId

Handle< Graphic3d_TransformPers >	myTrsfPers

Standard_Integer	mySFactor

Detailed Description

A framework to define a sensitive 3D curve. In some cases this class can raise Standard_ConstructionError and Standard_OutOfRange exceptions. For more details see Select3D_SensitivePoly.

Constructor & Destructor Documentation

◆ Select3D_SensitiveCurve() [1/3]

Select3D_SensitiveCurve::Select3D_SensitiveCurve	(	const Handle< SelectMgr_EntityOwner > &	theOwnerId,
		const Handle< Geom_Curve > &	theCurve,
		const Standard_Integer	theNbPnts = `17`
	)

inline

Constructs a sensitive curve object defined by the owner theOwnerId, the curve theCurve, and the maximum number of points on the curve: theNbPnts.

◆ Select3D_SensitiveCurve() [2/3]

Select3D_SensitiveCurve::Select3D_SensitiveCurve	(	const Handle< SelectMgr_EntityOwner > &	theOwnerId,
		const Handle< TColgp_HArray1OfPnt > &	thePoints
	)

Constructs a sensitive curve object defined by the owner theOwnerId and the set of points ThePoints.

◆ Select3D_SensitiveCurve() [3/3]

Select3D_SensitiveCurve::Select3D_SensitiveCurve	(	const Handle< SelectMgr_EntityOwner > &	theOwnerId,
		const TColgp_Array1OfPnt &	thePoints
	)

Creation of Sensitive Curve from Points. Warning : This Method should disappear in the next version...

Member Function Documentation

◆ GetConnected()

virtual Handle< Select3D_SensitiveEntity > Select3D_SensitiveCurve::GetConnected ( )

overridevirtual

Returns the copy of this.

Reimplemented from Select3D_SensitiveEntity.

The documentation for this class was generated from the following file:

Select3D_SensitiveCurve.hxx

Public Member Functions