#include <TopOpeBRepDS_SurfaceCurveInterference.hxx>
#include <TopOpeBRepDS_CurvePointInterference.hxx>
#include <TopOpeBRepDS_DataStructure.hxx>
#include <BRepBlend_Extremity.hxx>
#include <ChFiDS_Stripe.hxx>
#include <ChFiDS_SurfData.hxx>
#include <ChFiDS_Spine.hxx>
#include <ChFiDS_ElSpine.hxx>
#include <ChFiDS_CommonPoint.hxx>
#include <ChFiDS_Regul.hxx>
#include <NCollection_List.hxx>
#include <ChFiDS_FaceInterference.hxx>
#include <ChFiDS_Map.hxx>
#include <TopoDS_Face.hxx>
#include <TopoDS_Vertex.hxx>
#include <TopAbs_Orientation.hxx>
#include <TopoDS_Shape.hxx>
#include <IntSurf_TypeTrans.hxx>
#include <GeomFill_BoundWithSurf.hxx>
#include <Geom2d_Curve.hxx>
#include <Geom_Curve.hxx>
#include <Geom_TrimmedCurve.hxx>
#include <Geom_Surface.hxx>
#include <Geom_BezierCurve.hxx>
#include <Geom_Circle.hxx>
#include <GeomAdaptor_Surface.hxx>
#include <BRepAdaptor_Surface.hxx>
#include <Adaptor3d_Curve.hxx>
#include <Adaptor3d_Surface.hxx>
#include <Bnd_Box.hxx>
#include <GeomAbs_Shape.hxx>
#include <gp_Pnt.hxx>
#include <NCollection_Array1.hxx>

Functions
double	ChFi3d_InPeriod (const double U, const double UFirst, const double ULast, const double Eps)

void	ChFi3d_Boite (const gp_Pnt2d &p1, const gp_Pnt2d &p2, double &mu, double &Mu, double &mv, double &Mv)

void	ChFi3d_Boite (const gp_Pnt2d &p1, const gp_Pnt2d &p2, const gp_Pnt2d &p3, const gp_Pnt2d &p4, double &Du, double &Dv, double &mu, double &Mu, double &mv, double &Mv)

void	ChFi3d_SetPointTolerance (TopOpeBRepDS_DataStructure &DStr, const Bnd_Box &box, const int IP)

void	ChFi3d_EnlargeBox (const occ::handle< Geom_Curve > &C, const double wd, const double wf, Bnd_Box &box1, Bnd_Box &box2)

void	ChFi3d_EnlargeBox (const occ::handle< Adaptor3d_Surface > &S, const occ::handle< Geom2d_Curve > &PC, const double wd, const double wf, Bnd_Box &box1, Bnd_Box &box2)

void	ChFi3d_EnlargeBox (const TopoDS_Edge &E, const NCollection_List< TopoDS_Shape > &LF, const double w, Bnd_Box &box)

void	ChFi3d_EnlargeBox (TopOpeBRepDS_DataStructure &DStr, const occ::handle< ChFiDS_Stripe > &st, const occ::handle< ChFiDS_SurfData > &sd, Bnd_Box &b1, Bnd_Box &b2, const bool isfirst)

GeomAbs_Shape	ChFi3d_evalconti (const TopoDS_Edge &E, const TopoDS_Face &F1, const TopoDS_Face &F2)

void	ChFi3d_conexfaces (const TopoDS_Edge &E, TopoDS_Face &F1, TopoDS_Face &F2, const ChFiDS_Map &EFMap)

ChFiDS_State	ChFi3d_EdgeState (TopoDS_Edge *E, const ChFiDS_Map &EFMap)

bool	ChFi3d_KParticular (const occ::handle< ChFiDS_Spine > &Spine, const int IE, const BRepAdaptor_Surface &S1, const BRepAdaptor_Surface &S2)

void	ChFi3d_BoundFac (BRepAdaptor_Surface &S, const double umin, const double umax, const double vmin, const double vmax, const bool checknaturalbounds=true)

void	ChFi3d_BoundSrf (GeomAdaptor_Surface &S, const double umin, const double umax, const double vmin, const double vmax, const bool checknaturalbounds=true)

bool	ChFi3d_InterPlaneEdge (const occ::handle< Adaptor3d_Surface > &Plan, const occ::handle< Adaptor3d_Curve > &C, double &W, const bool Sens, const double tolc)

void	ChFi3d_ExtrSpineCarac (const TopOpeBRepDS_DataStructure &DStr, const occ::handle< ChFiDS_Stripe > &cd, const int i, const double p, const int jf, const int sens, gp_Pnt &P, gp_Vec &V, double &R)

occ::handle< Geom_Circle >	ChFi3d_CircularSpine (double &WFirst, double &WLast, const gp_Pnt &Pdeb, const gp_Vec &Vdeb, const gp_Pnt &Pfin, const gp_Vec &Vfin, const double rad)

occ::handle< Geom_BezierCurve >	ChFi3d_Spine (const gp_Pnt &pd, gp_Vec &vd, const gp_Pnt &pf, gp_Vec &vf, const double R)

occ::handle< GeomFill_Boundary >	ChFi3d_mkbound (const occ::handle< Adaptor3d_Surface > &Fac, occ::handle< Geom2d_Curve > &curv, const int sens1, const gp_Pnt2d &pfac1, const gp_Vec2d &vfac1, const int sens2, const gp_Pnt2d &pfac2, const gp_Vec2d &vfac2, const double t3d, const double ta)

occ::handle< GeomFill_Boundary >	ChFi3d_mkbound (const occ::handle< Adaptor3d_Surface > &Surf, occ::handle< Geom2d_Curve > &curv, const int sens1, const gp_Pnt2d &p1, gp_Vec &v1, const int sens2, const gp_Pnt2d &p2, gp_Vec &v2, const double t3d, const double ta)

occ::handle< GeomFill_Boundary >	ChFi3d_mkbound (const occ::handle< Geom_Surface > &s, const gp_Pnt2d &p1, const gp_Pnt2d &p2, const double t3d, const double ta, const bool isfreeboundary=false)

occ::handle< GeomFill_Boundary >	ChFi3d_mkbound (const occ::handle< Adaptor3d_Surface > &HS, const gp_Pnt2d &p1, const gp_Pnt2d &p2, const double t3d, const double ta, const bool isfreeboundary=false)

occ::handle< GeomFill_Boundary >	ChFi3d_mkbound (const occ::handle< Adaptor3d_Surface > &HS, const occ::handle< Geom2d_Curve > &curv, const double t3d, const double ta, const bool isfreeboundary=false)

occ::handle< GeomFill_Boundary >	ChFi3d_mkbound (const occ::handle< Adaptor3d_Surface > &Fac, occ::handle< Geom2d_Curve > &curv, const gp_Pnt2d &p1, const gp_Pnt2d &p2, const double t3d, const double ta, const bool isfreeboundary=false)

void	ChFi3d_Coefficient (const gp_Vec &V3d, const gp_Vec &D1u, const gp_Vec &D1v, double &DU, double &DV)

occ::handle< Geom2d_Curve >	ChFi3d_BuildPCurve (const gp_Pnt2d &p1, gp_Dir2d &d1, const gp_Pnt2d &p2, gp_Dir2d &d2, const bool redresse=true)

occ::handle< Geom2d_Curve >	ChFi3d_BuildPCurve (const occ::handle< Adaptor3d_Surface > &Surf, const gp_Pnt2d &p1, const gp_Vec &v1, const gp_Pnt2d &p2, const gp_Vec &v2, const bool redresse=false)

occ::handle< Geom2d_Curve >	ChFi3d_BuildPCurve (const occ::handle< Adaptor3d_Surface > &Surf, const gp_Pnt2d &p1, const gp_Vec2d &v1, const gp_Pnt2d &p2, const gp_Vec2d &v2, const bool redresse=false)

bool	ChFi3d_CheckSameParameter (const occ::handle< Adaptor3d_Curve > &C3d, occ::handle< Geom2d_Curve > &Pcurv, const occ::handle< Adaptor3d_Surface > &S, const double tol3d, double &tolreached)

bool	ChFi3d_SameParameter (const occ::handle< Adaptor3d_Curve > &C3d, occ::handle< Geom2d_Curve > &Pcurv, const occ::handle< Adaptor3d_Surface > &S, const double tol3d, double &tolreached)

bool	ChFi3d_SameParameter (const occ::handle< Geom_Curve > &C3d, occ::handle< Geom2d_Curve > &Pcurv, const occ::handle< Geom_Surface > &S, const double Pardeb, const double Parfin, const double tol3d, double &tolreached)

void	ChFi3d_ComputePCurv (const occ::handle< Geom_Curve > &C3d, const gp_Pnt2d &UV1, const gp_Pnt2d &UV2, occ::handle< Geom2d_Curve > &Pcurv, const occ::handle< Geom_Surface > &S, const double Pardeb, const double Parfin, const double tol3d, double &tolreached, const bool reverse=false)

void	ChFi3d_ComputePCurv (const occ::handle< Adaptor3d_Curve > &C3d, const gp_Pnt2d &UV1, const gp_Pnt2d &UV2, occ::handle< Geom2d_Curve > &Pcurv, const occ::handle< Adaptor3d_Surface > &S, const double Pardeb, const double Parfin, const double tol3d, double &tolreached, const bool reverse=false)

void	ChFi3d_ComputePCurv (const gp_Pnt2d &UV1, const gp_Pnt2d &UV2, occ::handle< Geom2d_Curve > &Pcurv, const double Pardeb, const double Parfin, const bool reverse=false)

bool	ChFi3d_IntTraces (const occ::handle< ChFiDS_SurfData > &fd1, const double pref1, double &p1, const int jf1, const int sens1, const occ::handle< ChFiDS_SurfData > &fd2, const double pref2, double &p2, const int jf2, const int sens2, const gp_Pnt2d &RefP2d, const bool Check2dDistance=false, const bool enlarge=false)

bool	ChFi3d_IsInFront (TopOpeBRepDS_DataStructure &DStr, const occ::handle< ChFiDS_Stripe > &cd1, const occ::handle< ChFiDS_Stripe > &cd2, const int i1, const int i2, const int sens1, const int sens2, double &p1, double &p2, TopoDS_Face &face, bool &sameside, int &jf1, int &jf2, bool &visavis, const TopoDS_Vertex &Vtx, const bool Check2dDistance=false, const bool enlarge=false)

void	ChFi3d_ProjectPCurv (const occ::handle< Adaptor3d_Curve > &HCg, const occ::handle< Adaptor3d_Surface > &HSg, occ::handle< Geom2d_Curve > &Pcurv, const double tol3d, double &tolreached)

void	ChFi3d_ReparamPcurv (const double Uf, const double Ul, occ::handle< Geom2d_Curve > &Pcurv)

void	ChFi3d_ComputeArete (const ChFiDS_CommonPoint &P1, const gp_Pnt2d &UV1, const ChFiDS_CommonPoint &P2, const gp_Pnt2d &UV2, const occ::handle< Geom_Surface > &Surf, occ::handle< Geom_Curve > &C3d, occ::handle< Geom2d_Curve > &Pcurv, double &Pardeb, double &Parfin, const double tol3d, const double tol2d, double &tolreached, const int IFlag)

occ::handle< TopOpeBRepDS_SurfaceCurveInterference >	ChFi3d_FilCurveInDS (const int Icurv, const int Isurf, const occ::handle< Geom2d_Curve > &Pcurv, const TopAbs_Orientation Et)

TopAbs_Orientation	ChFi3d_TrsfTrans (const IntSurf_TypeTrans T1)

void	ChFi3d_FilCommonPoint (const BRepBlend_Extremity &SP, const IntSurf_TypeTrans TransLine, const bool Start, ChFiDS_CommonPoint &CP, const double Tol)

int	ChFi3d_SolidIndex (const occ::handle< ChFiDS_Spine > &sp, TopOpeBRepDS_DataStructure &DStr, ChFiDS_Map &MapESo, ChFiDS_Map &MapESh)

int	ChFi3d_IndexPointInDS (const ChFiDS_CommonPoint &P1, TopOpeBRepDS_DataStructure &DStr)

occ::handle< TopOpeBRepDS_CurvePointInterference >	ChFi3d_FilPointInDS (const TopAbs_Orientation Et, const int Ic, const int Ip, const double Par, const bool IsVertex=false)

occ::handle< TopOpeBRepDS_CurvePointInterference >	ChFi3d_FilVertexInDS (const TopAbs_Orientation Et, const int Ic, const int Ip, const double Par)

void	ChFi3d_FilDS (const int SolidIndex, const occ::handle< ChFiDS_Stripe > &CorDat, TopOpeBRepDS_DataStructure &DStr, NCollection_List< ChFiDS_Regul > &reglist, const double tol3d, const double tol2d)

void	ChFi3d_StripeEdgeInter (const occ::handle< ChFiDS_Stripe > &theStripe1, const occ::handle< ChFiDS_Stripe > &theStripe2, TopOpeBRepDS_DataStructure &DStr, const double tol2d)

int	ChFi3d_IndexOfSurfData (const TopoDS_Vertex &V1, const occ::handle< ChFiDS_Stripe > &CD, int &sens)

TopoDS_Edge	ChFi3d_EdgeFromV1 (const TopoDS_Vertex &V1, const occ::handle< ChFiDS_Stripe > &CD, int &sens)

double	ChFi3d_ConvTol2dToTol3d (const occ::handle< Adaptor3d_Surface > &S, const double tol2d)

bool	ChFi3d_ComputeCurves (const occ::handle< Adaptor3d_Surface > &S1, const occ::handle< Adaptor3d_Surface > &S2, const NCollection_Array1< double > &Pardeb, const NCollection_Array1< double > &Parfin, occ::handle< Geom_Curve > &C3d, occ::handle< Geom2d_Curve > &Pc1, occ::handle< Geom2d_Curve > &Pc2, const double tol3d, const double tol2d, double &tolreached, const bool wholeCurv=true)

bool	ChFi3d_IntCS (const occ::handle< Adaptor3d_Surface > &S, const occ::handle< Adaptor3d_Curve > &C, gp_Pnt2d &p2dS, double &wc)

void	ChFi3d_ComputesIntPC (const ChFiDS_FaceInterference &Fi1, const ChFiDS_FaceInterference &Fi2, const occ::handle< GeomAdaptor_Surface > &HS1, const occ::handle< GeomAdaptor_Surface > &HS2, double &UInt1, double &UInt2)

void	ChFi3d_ComputesIntPC (const ChFiDS_FaceInterference &Fi1, const ChFiDS_FaceInterference &Fi2, const occ::handle< GeomAdaptor_Surface > &HS1, const occ::handle< GeomAdaptor_Surface > &HS2, double &UInt1, double &UInt2, gp_Pnt &P)

occ::handle< GeomAdaptor_Surface >	ChFi3d_BoundSurf (TopOpeBRepDS_DataStructure &DStr, const occ::handle< ChFiDS_SurfData > &Fd1, const int &IFaCo1, const int &IFaArc1)

int	ChFi3d_SearchPivot (int *s, double u[3][3], const double t)

bool	ChFi3d_SearchFD (TopOpeBRepDS_DataStructure &DStr, const occ::handle< ChFiDS_Stripe > &cd1, const occ::handle< ChFiDS_Stripe > &cd2, const int sens1, const int sens2, int &i1, int &i2, double &p1, double &p2, const int ind1, const int ind2, TopoDS_Face &face, bool &sameside, int &jf1, int &jf2)

void	ChFi3d_Parameters (const occ::handle< Geom_Surface > &S, const gp_Pnt &p3d, double &u, double &v)

void	ChFi3d_TrimCurve (const occ::handle< Geom_Curve > &gc, const gp_Pnt &FirstP, const gp_Pnt &LastP, occ::handle< Geom_TrimmedCurve > &gtc)

void	ChFi3d_PerformElSpine (occ::handle< ChFiDS_ElSpine > &HES, occ::handle< ChFiDS_Spine > &Spine, const GeomAbs_Shape continuity, const double tol, const bool IsOffset=false)

TopoDS_Face	ChFi3d_EnlargeFace (const occ::handle< ChFiDS_Spine > &Spine, const occ::handle< BRepAdaptor_Surface > &HS, const double Tol)

void	ChFi3d_cherche_face1 (const NCollection_List< TopoDS_Shape > &map, const TopoDS_Face &F1, TopoDS_Face &F)

void	ChFi3d_cherche_element (const TopoDS_Vertex &V, const TopoDS_Edge &E1, const TopoDS_Face &F1, TopoDS_Edge &E, TopoDS_Vertex &Vtx)

double	ChFi3d_EvalTolReached (const occ::handle< Adaptor3d_Surface > &S1, const occ::handle< Geom2d_Curve > &pc1, const occ::handle< Adaptor3d_Surface > &S2, const occ::handle< Geom2d_Curve > &pc2, const occ::handle< Geom_Curve > &C)

void	ChFi3d_cherche_edge (const TopoDS_Vertex &V, const NCollection_Array1< TopoDS_Shape > &E1, const TopoDS_Face &F1, TopoDS_Edge &E, TopoDS_Vertex &Vtx)

int	ChFi3d_nbface (const NCollection_List< TopoDS_Shape > &mapVF)

void	ChFi3d_edge_common_faces (const NCollection_List< TopoDS_Shape > &mapEF, TopoDS_Face &F1, TopoDS_Face &F2)

double	ChFi3d_AngleEdge (const TopoDS_Vertex &Vtx, const TopoDS_Edge &E1, const TopoDS_Edge &E2)

void	ChFi3d_ChercheBordsLibres (const ChFiDS_Map &myVEMap, const TopoDS_Vertex &V1, bool &bordlibre, TopoDS_Edge &edgelibre1, TopoDS_Edge &edgelibre2)

int	ChFi3d_NbNotDegeneratedEdges (const TopoDS_Vertex &Vtx, const ChFiDS_Map &VEMap)

int	ChFi3d_NumberOfEdges (const TopoDS_Vertex &Vtx, const ChFiDS_Map &VEMap)

int	ChFi3d_NumberOfSharpEdges (const TopoDS_Vertex &Vtx, const ChFiDS_Map &VEMap, const ChFiDS_Map &EFmap)

void	ChFi3d_cherche_vertex (const TopoDS_Edge &E1, const TopoDS_Edge &E2, TopoDS_Vertex &vertex, bool &trouve)

void	ChFi3d_Couture (const TopoDS_Face &F, bool &couture, TopoDS_Edge &edgecouture)

void	ChFi3d_CoutureOnVertex (const TopoDS_Face &F, const TopoDS_Vertex &V, bool &couture, TopoDS_Edge &edgecouture)

bool	ChFi3d_IsPseudoSeam (const TopoDS_Edge &E, const TopoDS_Face &F)

occ::handle< Geom_BSplineCurve >	ChFi3d_ApproxByC2 (const occ::handle< Geom_Curve > &C)

bool	ChFi3d_IsSmooth (const occ::handle< Geom_Curve > &C)

Function Documentation

◆ ChFi3d_AngleEdge()

double ChFi3d_AngleEdge	(	const TopoDS_Vertex &	Vtx,
		const TopoDS_Edge &	E1,
		const TopoDS_Edge &	E2 )

◆ ChFi3d_ApproxByC2()

occ::handle< Geom_BSplineCurve > ChFi3d_ApproxByC2 ( const occ::handle< Geom_Curve > & C )

◆ ChFi3d_Boite() [1/2]

void ChFi3d_Boite	(	const gp_Pnt2d &	p1,
		const gp_Pnt2d &	p2,
		const gp_Pnt2d &	p3,
		const gp_Pnt2d &	p4,
		double &	Du,
		double &	Dv,
		double &	mu,
		double &	Mu,
		double &	mv,
		double &	Mv )

◆ ChFi3d_Boite() [2/2]

void ChFi3d_Boite	(	const gp_Pnt2d &	p1,
		const gp_Pnt2d &	p2,
		double &	mu,
		double &	Mu,
		double &	mv,
		double &	Mv )

◆ ChFi3d_BoundFac()

void ChFi3d_BoundFac	(	BRepAdaptor_Surface &	S,
		const double	umin,
		const double	umax,
		const double	vmin,
		const double	vmax,
		const bool	checknaturalbounds = true )

◆ ChFi3d_BoundSrf()

void ChFi3d_BoundSrf	(	GeomAdaptor_Surface &	S,
		const double	umin,
		const double	umax,
		const double	vmin,
		const double	vmax,
		const bool	checknaturalbounds = true )

◆ ChFi3d_BoundSurf()

occ::handle< GeomAdaptor_Surface > ChFi3d_BoundSurf	(	TopOpeBRepDS_DataStructure &	DStr,
		const occ::handle< ChFiDS_SurfData > &	Fd1,
		const int &	IFaCo1,
		const int &	IFaArc1 )

◆ ChFi3d_BuildPCurve() [1/3]

occ::handle< Geom2d_Curve > ChFi3d_BuildPCurve	(	const gp_Pnt2d &	p1,
		gp_Dir2d &	d1,
		const gp_Pnt2d &	p2,
		gp_Dir2d &	d2,
		const bool	redresse = true )

◆ ChFi3d_BuildPCurve() [2/3]

occ::handle< Geom2d_Curve > ChFi3d_BuildPCurve	(	const occ::handle< Adaptor3d_Surface > &	Surf,
		const gp_Pnt2d &	p1,
		const gp_Vec &	v1,
		const gp_Pnt2d &	p2,
		const gp_Vec &	v2,
		const bool	redresse = false )

◆ ChFi3d_BuildPCurve() [3/3]

occ::handle< Geom2d_Curve > ChFi3d_BuildPCurve	(	const occ::handle< Adaptor3d_Surface > &	Surf,
		const gp_Pnt2d &	p1,
		const gp_Vec2d &	v1,
		const gp_Pnt2d &	p2,
		const gp_Vec2d &	v2,
		const bool	redresse = false )

◆ ChFi3d_CheckSameParameter()

bool ChFi3d_CheckSameParameter	(	const occ::handle< Adaptor3d_Curve > &	C3d,
		occ::handle< Geom2d_Curve > &	Pcurv,
		const occ::handle< Adaptor3d_Surface > &	S,
		const double	tol3d,
		double &	tolreached )

◆ ChFi3d_cherche_edge()

void ChFi3d_cherche_edge	(	const TopoDS_Vertex &	V,
		const NCollection_Array1< TopoDS_Shape > &	E1,
		const TopoDS_Face &	F1,
		TopoDS_Edge &	E,
		TopoDS_Vertex &	Vtx )

◆ ChFi3d_cherche_element()

void ChFi3d_cherche_element	(	const TopoDS_Vertex &	V,
		const TopoDS_Edge &	E1,
		const TopoDS_Face &	F1,
		TopoDS_Edge &	E,
		TopoDS_Vertex &	Vtx )

◆ ChFi3d_cherche_face1()

void ChFi3d_cherche_face1	(	const NCollection_List< TopoDS_Shape > &	map,
		const TopoDS_Face &	F1,
		TopoDS_Face &	F )

◆ ChFi3d_cherche_vertex()

void ChFi3d_cherche_vertex	(	const TopoDS_Edge &	E1,
		const TopoDS_Edge &	E2,
		TopoDS_Vertex &	vertex,
		bool &	trouve )

◆ ChFi3d_ChercheBordsLibres()

void ChFi3d_ChercheBordsLibres	(	const ChFiDS_Map &	myVEMap,
		const TopoDS_Vertex &	V1,
		bool &	bordlibre,
		TopoDS_Edge &	edgelibre1,
		TopoDS_Edge &	edgelibre2 )

◆ ChFi3d_CircularSpine()

occ::handle< Geom_Circle > ChFi3d_CircularSpine	(	double &	WFirst,
		double &	WLast,
		const gp_Pnt &	Pdeb,
		const gp_Vec &	Vdeb,
		const gp_Pnt &	Pfin,
		const gp_Vec &	Vfin,
		const double	rad )

◆ ChFi3d_Coefficient()

void ChFi3d_Coefficient	(	const gp_Vec &	V3d,
		const gp_Vec &	D1u,
		const gp_Vec &	D1v,
		double &	DU,
		double &	DV )

◆ ChFi3d_ComputeArete()

void ChFi3d_ComputeArete	(	const ChFiDS_CommonPoint &	P1,
		const gp_Pnt2d &	UV1,
		const ChFiDS_CommonPoint &	P2,
		const gp_Pnt2d &	UV2,
		const occ::handle< Geom_Surface > &	Surf,
		occ::handle< Geom_Curve > &	C3d,
		occ::handle< Geom2d_Curve > &	Pcurv,
		double &	Pardeb,
		double &	Parfin,
		const double	tol3d,
		const double	tol2d,
		double &	tolreached,
		const int	IFlag )

◆ ChFi3d_ComputeCurves()

bool ChFi3d_ComputeCurves	(	const occ::handle< Adaptor3d_Surface > &	S1,
		const occ::handle< Adaptor3d_Surface > &	S2,
		const NCollection_Array1< double > &	Pardeb,
		const NCollection_Array1< double > &	Parfin,
		occ::handle< Geom_Curve > &	C3d,
		occ::handle< Geom2d_Curve > &	Pc1,
		occ::handle< Geom2d_Curve > &	Pc2,
		const double	tol3d,
		const double	tol2d,
		double &	tolreached,
		const bool	wholeCurv = true )

◆ ChFi3d_ComputePCurv() [1/3]

void ChFi3d_ComputePCurv	(	const gp_Pnt2d &	UV1,
		const gp_Pnt2d &	UV2,
		occ::handle< Geom2d_Curve > &	Pcurv,
		const double	Pardeb,
		const double	Parfin,
		const bool	reverse = false )

◆ ChFi3d_ComputePCurv() [2/3]

void ChFi3d_ComputePCurv	(	const occ::handle< Adaptor3d_Curve > &	C3d,
		const gp_Pnt2d &	UV1,
		const gp_Pnt2d &	UV2,
		occ::handle< Geom2d_Curve > &	Pcurv,
		const occ::handle< Adaptor3d_Surface > &	S,
		const double	Pardeb,
		const double	Parfin,
		const double	tol3d,
		double &	tolreached,
		const bool	reverse = false )

◆ ChFi3d_ComputePCurv() [3/3]

void ChFi3d_ComputePCurv	(	const occ::handle< Geom_Curve > &	C3d,
		const gp_Pnt2d &	UV1,
		const gp_Pnt2d &	UV2,
		occ::handle< Geom2d_Curve > &	Pcurv,
		const occ::handle< Geom_Surface > &	S,
		const double	Pardeb,
		const double	Parfin,
		const double	tol3d,
		double &	tolreached,
		const bool	reverse = false )

◆ ChFi3d_ComputesIntPC() [1/2]

void ChFi3d_ComputesIntPC	(	const ChFiDS_FaceInterference &	Fi1,
		const ChFiDS_FaceInterference &	Fi2,
		const occ::handle< GeomAdaptor_Surface > &	HS1,
		const occ::handle< GeomAdaptor_Surface > &	HS2,
		double &	UInt1,
		double &	UInt2 )

◆ ChFi3d_ComputesIntPC() [2/2]

void ChFi3d_ComputesIntPC	(	const ChFiDS_FaceInterference &	Fi1,
		const ChFiDS_FaceInterference &	Fi2,
		const occ::handle< GeomAdaptor_Surface > &	HS1,
		const occ::handle< GeomAdaptor_Surface > &	HS2,
		double &	UInt1,
		double &	UInt2,
		gp_Pnt &	P )

◆ ChFi3d_conexfaces()

void ChFi3d_conexfaces	(	const TopoDS_Edge &	E,
		TopoDS_Face &	F1,
		TopoDS_Face &	F2,
		const ChFiDS_Map &	EFMap )

◆ ChFi3d_ConvTol2dToTol3d()

double ChFi3d_ConvTol2dToTol3d	(	const occ::handle< Adaptor3d_Surface > &	S,
		const double	tol2d )

◆ ChFi3d_Couture()

void ChFi3d_Couture	(	const TopoDS_Face &	F,
		bool &	couture,
		TopoDS_Edge &	edgecouture )

◆ ChFi3d_CoutureOnVertex()

void ChFi3d_CoutureOnVertex	(	const TopoDS_Face &	F,
		const TopoDS_Vertex &	V,
		bool &	couture,
		TopoDS_Edge &	edgecouture )

◆ ChFi3d_edge_common_faces()

void ChFi3d_edge_common_faces	(	const NCollection_List< TopoDS_Shape > &	mapEF,
		TopoDS_Face &	F1,
		TopoDS_Face &	F2 )

◆ ChFi3d_EdgeFromV1()

TopoDS_Edge ChFi3d_EdgeFromV1	(	const TopoDS_Vertex &	V1,
		const occ::handle< ChFiDS_Stripe > &	CD,
		int &	sens )

◆ ChFi3d_EdgeState()

ChFiDS_State ChFi3d_EdgeState	(	TopoDS_Edge *	E,
		const ChFiDS_Map &	EFMap )

◆ ChFi3d_EnlargeBox() [1/4]

void ChFi3d_EnlargeBox	(	const occ::handle< Adaptor3d_Surface > &	S,
		const occ::handle< Geom2d_Curve > &	PC,
		const double	wd,
		const double	wf,
		Bnd_Box &	box1,
		Bnd_Box &	box2 )

◆ ChFi3d_EnlargeBox() [2/4]

void ChFi3d_EnlargeBox	(	const occ::handle< Geom_Curve > &	C,
		const double	wd,
		const double	wf,
		Bnd_Box &	box1,
		Bnd_Box &	box2 )

◆ ChFi3d_EnlargeBox() [3/4]

void ChFi3d_EnlargeBox	(	const TopoDS_Edge &	E,
		const NCollection_List< TopoDS_Shape > &	LF,
		const double	w,
		Bnd_Box &	box )

◆ ChFi3d_EnlargeBox() [4/4]

void ChFi3d_EnlargeBox	(	TopOpeBRepDS_DataStructure &	DStr,
		const occ::handle< ChFiDS_Stripe > &	st,
		const occ::handle< ChFiDS_SurfData > &	sd,
		Bnd_Box &	b1,
		Bnd_Box &	b2,
		const bool	isfirst )

◆ ChFi3d_EnlargeFace()

TopoDS_Face ChFi3d_EnlargeFace	(	const occ::handle< ChFiDS_Spine > &	Spine,
		const occ::handle< BRepAdaptor_Surface > &	HS,
		const double	Tol )

◆ ChFi3d_evalconti()

GeomAbs_Shape ChFi3d_evalconti	(	const TopoDS_Edge &	E,
		const TopoDS_Face &	F1,
		const TopoDS_Face &	F2 )

◆ ChFi3d_EvalTolReached()

double ChFi3d_EvalTolReached	(	const occ::handle< Adaptor3d_Surface > &	S1,
		const occ::handle< Geom2d_Curve > &	pc1,
		const occ::handle< Adaptor3d_Surface > &	S2,
		const occ::handle< Geom2d_Curve > &	pc2,
		const occ::handle< Geom_Curve > &	C )

◆ ChFi3d_ExtrSpineCarac()

void ChFi3d_ExtrSpineCarac	(	const TopOpeBRepDS_DataStructure &	DStr,
		const occ::handle< ChFiDS_Stripe > &	cd,
		const int	i,
		const double	p,
		const int	jf,
		const int	sens,
		gp_Pnt &	P,
		gp_Vec &	V,
		double &	R )

◆ ChFi3d_FilCommonPoint()

void ChFi3d_FilCommonPoint	(	const BRepBlend_Extremity &	SP,
		const IntSurf_TypeTrans	TransLine,
		const bool	Start,
		ChFiDS_CommonPoint &	CP,
		const double	Tol )

◆ ChFi3d_FilCurveInDS()

occ::handle< TopOpeBRepDS_SurfaceCurveInterference > ChFi3d_FilCurveInDS	(	const int	Icurv,
		const int	Isurf,
		const occ::handle< Geom2d_Curve > &	Pcurv,
		const TopAbs_Orientation	Et )

◆ ChFi3d_FilDS()

void ChFi3d_FilDS	(	const int	SolidIndex,
		const occ::handle< ChFiDS_Stripe > &	CorDat,
		TopOpeBRepDS_DataStructure &	DStr,
		NCollection_List< ChFiDS_Regul > &	reglist,
		const double	tol3d,
		const double	tol2d )

◆ ChFi3d_FilPointInDS()

occ::handle< TopOpeBRepDS_CurvePointInterference > ChFi3d_FilPointInDS	(	const TopAbs_Orientation	Et,
		const int	Ic,
		const int	Ip,
		const double	Par,
		const bool	IsVertex = false )

◆ ChFi3d_FilVertexInDS()

occ::handle< TopOpeBRepDS_CurvePointInterference > ChFi3d_FilVertexInDS	(	const TopAbs_Orientation	Et,
		const int	Ic,
		const int	Ip,
		const double	Par )

◆ ChFi3d_IndexOfSurfData()

int ChFi3d_IndexOfSurfData	(	const TopoDS_Vertex &	V1,
		const occ::handle< ChFiDS_Stripe > &	CD,
		int &	sens )

◆ ChFi3d_IndexPointInDS()

int ChFi3d_IndexPointInDS	(	const ChFiDS_CommonPoint &	P1,
		TopOpeBRepDS_DataStructure &	DStr )

◆ ChFi3d_InPeriod()

double ChFi3d_InPeriod	(	const double	U,
		const double	UFirst,
		const double	ULast,
		const double	Eps )

◆ ChFi3d_IntCS()

bool ChFi3d_IntCS	(	const occ::handle< Adaptor3d_Surface > &	S,
		const occ::handle< Adaptor3d_Curve > &	C,
		gp_Pnt2d &	p2dS,
		double &	wc )

◆ ChFi3d_InterPlaneEdge()

bool ChFi3d_InterPlaneEdge	(	const occ::handle< Adaptor3d_Surface > &	Plan,
		const occ::handle< Adaptor3d_Curve > &	C,
		double &	W,
		const bool	Sens,
		const double	tolc )

◆ ChFi3d_IntTraces()

bool ChFi3d_IntTraces	(	const occ::handle< ChFiDS_SurfData > &	fd1,
		const double	pref1,
		double &	p1,
		const int	jf1,
		const int	sens1,
		const occ::handle< ChFiDS_SurfData > &	fd2,
		const double	pref2,
		double &	p2,
		const int	jf2,
		const int	sens2,
		const gp_Pnt2d &	RefP2d,
		const bool	Check2dDistance = false,
		const bool	enlarge = false )

◆ ChFi3d_IsInFront()

bool ChFi3d_IsInFront	(	TopOpeBRepDS_DataStructure &	DStr,
		const occ::handle< ChFiDS_Stripe > &	cd1,
		const occ::handle< ChFiDS_Stripe > &	cd2,
		const int	i1,
		const int	i2,
		const int	sens1,
		const int	sens2,
		double &	p1,
		double &	p2,
		TopoDS_Face &	face,
		bool &	sameside,
		int &	jf1,
		int &	jf2,
		bool &	visavis,
		const TopoDS_Vertex &	Vtx,
		const bool	Check2dDistance = false,
		const bool	enlarge = false )

◆ ChFi3d_IsPseudoSeam()

bool ChFi3d_IsPseudoSeam	(	const TopoDS_Edge &	E,
		const TopoDS_Face &	F )

◆ ChFi3d_IsSmooth()

bool ChFi3d_IsSmooth ( const occ::handle< Geom_Curve > & C )

◆ ChFi3d_KParticular()

bool ChFi3d_KParticular	(	const occ::handle< ChFiDS_Spine > &	Spine,
		const int	IE,
		const BRepAdaptor_Surface &	S1,
		const BRepAdaptor_Surface &	S2 )

◆ ChFi3d_mkbound() [1/6]

occ::handle< GeomFill_Boundary > ChFi3d_mkbound	(	const occ::handle< Adaptor3d_Surface > &	Fac,
		occ::handle< Geom2d_Curve > &	curv,
		const gp_Pnt2d &	p1,
		const gp_Pnt2d &	p2,
		const double	t3d,
		const double	ta,
		const bool	isfreeboundary = false )

◆ ChFi3d_mkbound() [2/6]

occ::handle< GeomFill_Boundary > ChFi3d_mkbound	(	const occ::handle< Adaptor3d_Surface > &	Fac,
		occ::handle< Geom2d_Curve > &	curv,
		const int	sens1,
		const gp_Pnt2d &	pfac1,
		const gp_Vec2d &	vfac1,
		const int	sens2,
		const gp_Pnt2d &	pfac2,
		const gp_Vec2d &	vfac2,
		const double	t3d,
		const double	ta )

◆ ChFi3d_mkbound() [3/6]

occ::handle< GeomFill_Boundary > ChFi3d_mkbound	(	const occ::handle< Adaptor3d_Surface > &	HS,
		const gp_Pnt2d &	p1,
		const gp_Pnt2d &	p2,
		const double	t3d,
		const double	ta,
		const bool	isfreeboundary = false )

◆ ChFi3d_mkbound() [4/6]

occ::handle< GeomFill_Boundary > ChFi3d_mkbound	(	const occ::handle< Adaptor3d_Surface > &	HS,
		const occ::handle< Geom2d_Curve > &	curv,
		const double	t3d,
		const double	ta,
		const bool	isfreeboundary = false )

◆ ChFi3d_mkbound() [5/6]

occ::handle< GeomFill_Boundary > ChFi3d_mkbound	(	const occ::handle< Adaptor3d_Surface > &	Surf,
		occ::handle< Geom2d_Curve > &	curv,
		const int	sens1,
		const gp_Pnt2d &	p1,
		gp_Vec &	v1,
		const int	sens2,
		const gp_Pnt2d &	p2,
		gp_Vec &	v2,
		const double	t3d,
		const double	ta )

◆ ChFi3d_mkbound() [6/6]

occ::handle< GeomFill_Boundary > ChFi3d_mkbound	(	const occ::handle< Geom_Surface > &	s,
		const gp_Pnt2d &	p1,
		const gp_Pnt2d &	p2,
		const double	t3d,
		const double	ta,
		const bool	isfreeboundary = false )

◆ ChFi3d_nbface()

int ChFi3d_nbface ( const NCollection_List< TopoDS_Shape > & mapVF )

◆ ChFi3d_NbNotDegeneratedEdges()

int ChFi3d_NbNotDegeneratedEdges	(	const TopoDS_Vertex &	Vtx,
		const ChFiDS_Map &	VEMap )

◆ ChFi3d_NumberOfEdges()

int ChFi3d_NumberOfEdges	(	const TopoDS_Vertex &	Vtx,
		const ChFiDS_Map &	VEMap )

◆ ChFi3d_NumberOfSharpEdges()

int ChFi3d_NumberOfSharpEdges	(	const TopoDS_Vertex &	Vtx,
		const ChFiDS_Map &	VEMap,
		const ChFiDS_Map &	EFmap )

◆ ChFi3d_Parameters()

void ChFi3d_Parameters	(	const occ::handle< Geom_Surface > &	S,
		const gp_Pnt &	p3d,
		double &	u,
		double &	v )

◆ ChFi3d_PerformElSpine()

void ChFi3d_PerformElSpine	(	occ::handle< ChFiDS_ElSpine > &	HES,
		occ::handle< ChFiDS_Spine > &	Spine,
		const GeomAbs_Shape	continuity,
		const double	tol,
		const bool	IsOffset = false )

◆ ChFi3d_ProjectPCurv()

void ChFi3d_ProjectPCurv	(	const occ::handle< Adaptor3d_Curve > &	HCg,
		const occ::handle< Adaptor3d_Surface > &	HSg,
		occ::handle< Geom2d_Curve > &	Pcurv,
		const double	tol3d,
		double &	tolreached )

◆ ChFi3d_ReparamPcurv()

void ChFi3d_ReparamPcurv	(	const double	Uf,
		const double	Ul,
		occ::handle< Geom2d_Curve > &	Pcurv )

◆ ChFi3d_SameParameter() [1/2]

bool ChFi3d_SameParameter	(	const occ::handle< Adaptor3d_Curve > &	C3d,
		occ::handle< Geom2d_Curve > &	Pcurv,
		const occ::handle< Adaptor3d_Surface > &	S,
		const double	tol3d,
		double &	tolreached )

◆ ChFi3d_SameParameter() [2/2]

bool ChFi3d_SameParameter	(	const occ::handle< Geom_Curve > &	C3d,
		occ::handle< Geom2d_Curve > &	Pcurv,
		const occ::handle< Geom_Surface > &	S,
		const double	Pardeb,
		const double	Parfin,
		const double	tol3d,
		double &	tolreached )

◆ ChFi3d_SearchFD()

bool ChFi3d_SearchFD	(	TopOpeBRepDS_DataStructure &	DStr,
		const occ::handle< ChFiDS_Stripe > &	cd1,
		const occ::handle< ChFiDS_Stripe > &	cd2,
		const int	sens1,
		const int	sens2,
		int &	i1,
		int &	i2,
		double &	p1,
		double &	p2,
		const int	ind1,
		const int	ind2,
		TopoDS_Face &	face,
		bool &	sameside,
		int &	jf1,
		int &	jf2 )

◆ ChFi3d_SearchPivot()

int ChFi3d_SearchPivot	(	int *	s,
		double	u[3][3],
		const double	t )

◆ ChFi3d_SetPointTolerance()

void ChFi3d_SetPointTolerance	(	TopOpeBRepDS_DataStructure &	DStr,
		const Bnd_Box &	box,
		const int	IP )

◆ ChFi3d_SolidIndex()

int ChFi3d_SolidIndex	(	const occ::handle< ChFiDS_Spine > &	sp,
		TopOpeBRepDS_DataStructure &	DStr,
		ChFiDS_Map &	MapESo,
		ChFiDS_Map &	MapESh )

◆ ChFi3d_Spine()

occ::handle< Geom_BezierCurve > ChFi3d_Spine	(	const gp_Pnt &	pd,
		gp_Vec &	vd,
		const gp_Pnt &	pf,
		gp_Vec &	vf,
		const double	R )

◆ ChFi3d_StripeEdgeInter()

void ChFi3d_StripeEdgeInter	(	const occ::handle< ChFiDS_Stripe > &	theStripe1,
		const occ::handle< ChFiDS_Stripe > &	theStripe2,
		TopOpeBRepDS_DataStructure &	DStr,
		const double	tol2d )

◆ ChFi3d_TrimCurve()

void ChFi3d_TrimCurve	(	const occ::handle< Geom_Curve > &	gc,
		const gp_Pnt &	FirstP,
		const gp_Pnt &	LastP,
		occ::handle< Geom_TrimmedCurve > &	gtc )

◆ ChFi3d_TrsfTrans()

TopAbs_Orientation ChFi3d_TrsfTrans ( const IntSurf_TypeTrans T1 )

Functions